Rocker Switches LTIG-Series The LTIG-Series Tippette rocker switches are lighted, double pole and AC rated up to 26 amps. A variety of circuits, colors, terminations and lamp voltages are available. Specifications •Certifications*: UL, CSA •Dielectric Strength: 1,000V (minimum) •Insulation Resistance: 100 Megohms (minimum) •Base Material: Phenolic •Actuator Material: Nylon •Bezel Material: Nylon or Steel * Due to ongoing technological advances, consult factory for certification specifics. .075[1.91] DIA .125[3.18] DIA Dimensional Specifications: in. [mm] .330[8.38] .426[10.82] .187[4.74] .437[11.09] .394[10.00] .250[6.35] .187[4.74] .250 TAB (Q.C.) SOLDER LUG .187 TAB (Q.C.) TERMINAL TYPE .709[18.00] .345[8.76] .055[1.40] DIA #6-32NC-2 THREAD 1.088[27.63] 1.302[33.07] .187[4.75] 6.000[152.40] .141[3.58] .370[9.39] .500[12.70] .286[7.26] .187[4.75] .350[8.89] 1.190[30.22] MOUNTING HOLE Metal Snap-in Brackets Panel Thickness: .040 min. - .100 max. Nylon Snap-in Brackets Panel Thickness: .040 min -.250 max. .680[17.27] K 55° 4 plcs* * Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. 5 1 - 6S - BL - RC - NBL / 125N SERIES RATING2 ACTUATOR STYLE3 ACTUATOR COLOR4 BRACKET STYLE6 LTIG DOUBLE POLE LIGHTED 5 BL BLACK WH WHITE CIRCUIT1 6 1C CROSS SERRATED 1L LONG LINED 1S SMOOTH ANGLED 6M7 MATTE CURVED (M, N OR W BRACKETS ONLY) 6S SMOOTH CURVED (M, N & W BRACKETS ONLY) K ON-NONE-OFF L ON-NONE-ON M ON-OFF-ON 10A 250VAC 15A 125VAC 3/4HP 250VAC 3A 250VAC 6A 125VAC 1/4HP 125-250VAC NOTES: Shading indicates standard configurations. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 Lighted circuits L and M have two lamps. 2 Additional non-inductive ratings to 26 amps available. Consult factory. 3 Imprinting available on smooth face rockers. Other actuator styles available. Consult factory. 4 Glossy finish is standard. Custom colors are available. Consult factory. 5 Green & blue not recommended w/ 125 volt or 250 volt neon lamp. For two different color lenses, please specify when ordering lens color. (ex.) RC/GN 6 Barbs are available on FN style bracket to accommodate panel thickness of .062, .100, .125, .156 and .250. Specify after bracket selection. (ex.) FN/.125 MBL, NBL & WBL brackets are molded in black. If white is desired, specify as MWH, NWH & WWH. FN and FW brackets have a nickel-plated finish. Additional finishes are available; specify as follows: stainless steel: FN/SS; chrome: FN/CHP; black oxide: FW/BLK. FW bracket not available in stainless steel. Bracket style MBL consists of LNP rocker, neoprene seal, syntech grease, dummy rivets. MBL, NBL and WBL brackets supplied in two pole base. All other brackets supplied in three pole base. MBL does not have UL & CSA approvals. 7 Actuator & Bracket Finish is a matched set. 46 PRINTED CIRCUIT WIRE LEAD .830[21.08] 1.450[36.83] LTIG SCREW (ASSEMBLED) LENS COLOR5 AM CL GN LU RC WH AMBER CLEAR GREEN BLUE RED WHITE A C FN FW MBL NBL WBL NARROW WIDE MARINE WATERSHEDDING LAMP VOLTAGE 6V 6 VOLT/ INCANDESCENT 12V 12 VOLT/ TERMINATION/FUNCTION INCANDESCENT 18V 18 VOLT/ .250 .187 INCANDESCENT SOLDER TAB TAB SCREW WIRE PC 24V 24 VOLT/ FUNCTION LUG (QC) (QC) TERM. LEAD TERM. INCANDESCENT ON-NONE-OFF 0 1 3 4 5 6 28V 28 VOLT/ (ON)-NONE-OFF A B D E F G INCANDESCENT ON-NONE-(OFF) L M R S T U 125N 125 VOLT/ NEON ON-NONE-ON 0 1 3 4 5 6 250N 250 VOLT/ NEON ON-NONE-(ON) A B D E F G ON-OFF-ON 0 1 3 4 5 6 ON-OFF-(ON) A B D E F G (ON)-OFF-(ON) L M R S T U Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 Rocker Switches Actuator Style/Dimensions: in. [mm] 1.224[31.08] 1.224[31.08] 1.224[31.08] 1.224[31.08] 1C 1L 1S 6S CROSS-LINE W/ONE LENS LONG-LINE W/ONE LENS SMOOTH W/ONE LENS CURVED W/ONE LENS Bracket Dimensions: in. [mm] # 6-32NC-2 TAP .156[3.96] DIA .070[1.77] .158[4.01] DIA TAPPED HOLE CLEARANCE HOLE Standard with A Bracket Standard with C Bracket 1.960[49.78] 2.062[52.37] .078[1.98] .426[10.82] 1.625[41.27] 1.625[41.27] A C 1.700[43.18] .960[24.38] 1.570[39.88] GCP GLOSS FINISH GMP .430[10.92] MATTE FINISH HOLE PLUG FOR LTIL, LTIG & LTIH NARROW WIDE 1.570[39.87] 1.750[44.45] .900[22.86] 1.126[28.60] MARINE / STD / WATERSHEDDING 1.700[43.18] .960[24.38] FN FW MBL, NBL, WBL METAL, SNAP-IN METAL, SNAP-IN BLACK NYLON, SNAP-IN Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 47