ALUMINUM ELECTROLYTIC CAPACITORS RS Compact & Low-profile Sized series (Through 100V only) Compact & low profile case size. Compliant to the RoHS directive (2011/65/EU). RZ High Temperature RS Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C Rated Voltage Range 6.3 to 400V Rated Capacitance Range 0.1 to 10000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current 6.3 to 100 After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. 160 to 400 After 1 minute's application of rated voltage at 20°C, I = 0.04CV+100 (µA) or less For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz at 20˚C Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 100 0.08 160 0.20 200 0.20 250 0.20 400 0.25 Measurement frequency : 120Hz 6.3 5 12 Rated voltage (V) Z– 25˚C / Z+20˚C Impedance ratio ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C Stability at Low Temperature 10 4 10 16 3 8 25 2 5 35 2 4 50 2 3 63 2 3 Capacitance change tan δ Leakage current 100 2 3 160 3 4 200 3 4 250 3 6 400 6 10 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 330µF) 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 URS 1 A 3 3 1 MPD Capacitance tolerance (±20%) P ±0.5 φD+0.5 MAX Size code Configuration Rated capacitance (330µF) Rated voltage (10V) Pressure relief vent (φ8up) Series name L+ 15MIN MAX Type 4MIN Configuration (mm) φD P φd 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 20 10.0 1.0 φD Pb-free leadwire Pb-free PET sleeve 5 · 6.3 DD 8 · 10 12.5 to 18 20 PD HD RD (φD 20) 1.5 (φD 20) 2.0 • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS RS series Dimensions V Cap.(µF) 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H 9 Code 0.1 0R1 5× 0.22 R22 5× 9 2.3 0.33 R33 5× 9 3.5 0.47 R47 5× 9 5 1 010 5× 9 13 2.2 2R2 5× 9 26 3.3 3R3 5× 9 35 4.7 4R7 40 65 55 5× 9 55 5× 9 70 5× 9 75 5× 9 95 5× 9 90 5× 9 75 5× 9 85 5× 9 95 5× 9 6.3 × 9 120 75 5× 9 90 5× 9 100 5× 9 110 100 130 6.3 × 9 140 125 5× 9 135 220 6.3 × 9 10 × 9 240 10 × 12.5 420 300 360 10 × 9 12.5 × 12.5 530 220 5× 9 35 5× 9 33 330 5× 9 55 47 470 5× 9 100 101 5× 9 220 6.3 × 9 330 221 331 470 8× 9 1000 471 102 2200 222 3300 332 4700 472 6800 682 10000 103 200 250 6.3 × 9 8× 9 10 × 9 330 510 12.5 × 15 890 V 5× 9 5× 9 22 Code 35 50 Cap.(µF) 5× 9 5× 9 100 × 15 16 × 15 18 × 15 18 × 20 30 40 10 16 5× 9 5× 9 6.3 × 9 8× 9 10 × 12.5 6.3 × 9 160 290 6.3 × 9 180 10 × 9 10 × 9 10 × 9 10 × 12.5 480 10 × 9 360 410 310 380 220 340 10 × 12.5 530 12.5 × 12.5 590 16 × 15 750 620 12.5 × 12.5 720 12.5 × 15 830 16 × 15 1010 18 × 20 1160 20 × 25 8× 9 8× 9 12.5 × 15 960 16 × 15 1160 18 × 15 1360 18 × 20 1560 1200 16 × 15 1300 18 × 15 1460 18 × 20 1720 20 × 25 2000 1410 18 × 15 1550 18 × 20 1770 18 × 25 2050 1660 18 × 20 1850 18 × 25 2170 2020 18 × 25 2350 Case size φ D × L (mm) 100 160 200 250 400 1J 2A 2C 2D 2E 2G 0.1 0R1 5× 9 1.9 0.22 R22 5× 9 4.5 0.33 R33 5× 9 6.5 0.47 R47 5× 9 8 1 010 5× 9 17 2.2 2R2 5× 9 26 3.3 3R3 5× 9 35 4.7 4R7 6.3 × 9 45 10 100 5 × 9.51 60 6.3 × 9 70 22 220 6.3 × 9.51 100 8× 9 130 33 330 8 × 9.51 140 10 × 9 180 47 470 8 × 9.51 170 10 × 12.5 68 680 100 101 230 370 150 151 220 221 12.5 × 12.5 490 16 × 15 330 331 12.5 × 15.5 710 18 × 15 470 471 16 × 15.5 250 12.5 × 15 900 620 16 × 15 .16 × 15 350 420 • 18 × 15 350 • 18 × 15 420 490 .18 × 20 490 18 × 25 590 .18 × 25 590 .18 × 25 710 490 ∆ 18 × 20 ∆ 18 × 20 590 18 × 25 710 .20 × 25 770 • 18 × 15 280 .∆ 18 × 20 420 760 16 × 15 .16 × 15 1750 63 10 × 9.51 1.1 • 18 × 15 Rated ripple 140 280 18 × 20 350 18 × 25 420 20 × 25 490 Case size Rated ripple φ D × L (mm) Rated ripple current (mArms) at 85˚C 120Hz • Size φ 16 × 20 is available for capacitors marked " " Size φ 20 × 15 is available for capacitors marked " ∆ " Size φ 20 × 20 is available for capacitors marked " " Frequency coefficient of rated ripple current V 6.3 to 100 160 to 400 Cap.(µF) Frequency 0.1 to 47 100 to 470 1000 to 10000 10 to 220 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1 kHz 1.57 1.34 1.13 1.40 10kHz or more 2.00 1.50 1.15 1.60 In this case, 6 will be put at 12th digit of type numbering system. CAT.8100D