ALUMINUM ELECTROLYTIC CAPACITORS RZ Compact & Low-Profile Sized, Wide Temperature Range series Very small case sizes same as RS series, but operating over wide temperature range of – 55 (– 40) to +105˚C. Compliant to the RoHS directive (2011/65/EU). (Through 100V only) RZ High Temperature RS Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C (6.3 to 100V) , –40 to +105˚C (160 to 400V) Rated Voltage Range 6.3 to 400V Rated Capacitance Range 0.1 to 10000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current 6.3 to 100 After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. 160 to 400 After 1 minute's application of rated voltage at 20°C, I = 0.04CV+100 (µA) or less For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz at 20˚C Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 100 0.08 160 0.20 200 0.20 250 0.20 400 0.25 Measurement frequency : 120Hz Rated voltage (V) Z– 25˚C / Z+20˚C Impedance ratio ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C Stability at Low Temperature 6.3 5 10 10 4 8 16 3 6 25 2 4 35 2 3 50 2 3 63 2 3 100 2 3 160 3 4 200 3 4 250 3 6 400 6 10 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 330µF) 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 UR Z 1 A 3 3 1 MPD 12 Size code Capacitance tolerance (±20%) P ±0.5 φD+0.5 MAX Configuration Rated capacitance (330µF) Rated voltage (10V) Pressure relief vent (φ8up) Series name L+ 15MIN MAX Type 4MIN (mm) (φD < 20) 1.5 (φD 20) 2.0 Configuration Pb-free leadwire Pb-free PET sleeve φD 5 6.3 8 10 12.5 16 18 20 φD P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 5 · 6.3 DD φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 8 · 10 12.5 to 18 20 PD HD RD • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS RZ series Dimensions Cap.(µF) V 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H 0.1 Code 0R1 5× 9 1.1 0.22 R22 5× 9 2.3 0.33 R33 5× 9 3.5 0.47 R47 5× 9 5 1 010 5× 9 12 2.2 2R2 5× 9 18 3.3 3R3 5× 9 25 4.7 4R7 5× 9 20 5× 9 25 5× 9 30 5× 9 30 5× 9 35 5× 9 40 5× 9 46 40 5× 9 50 5× 9 55 5× 9 60 5× 9 65 5× 9 55 5× 9 60 5× 9 70 5× 9 75 6.3 × 9 85 5× 9 65 5× 9 70 5× 9 80 6.3 × 9 95 6.3 × 9 100 5× 9 95 6.3 × 9... 115 6.3 × 9... 130 8× 9 155 10 × 9 170 6.3 × 9 155 8 × 9.. 205 10 × 9.. 220 10 × 9 235 10 × 12.5 290 8× 9 210 10 × 9.. 240 10 × 9.. 270 10 × 12.5 340 12.5 × 12.5 370 8× 9 275 10 × 9.. 290 ...10 × 12.5 370 12.5 × 12.5 420 16 × 15 540 450 .12.5 × 12.5. 520 12.5 × 15... 590 16 × 15 720 18 × 20 830 12.5 × 15 690 16 × 15 830 18 × 15 970 18 × 20 1110 20 × 25 1250 860 16 × 15 940 18 × 15 1050 18 × 20 1220 20 × 25 1430 1010 18 × 15 1120 18 × 20 1260 18 × 25 1470 18 × 15 1200 18 × 20 1330 18 × 25 1560 18 × 20 1450 18 × 25 1700 10 100 22 220 5× 9 25 5× 9 33 330 5× 9 40 47 470 5× 9 55 100 101 5× 9 90 220 221 6.3 × 9 145 330 331 6.3 × 9 180 470 471 8× 9 235 1000 102 10 × 9 370 2200 222 12.5 × 15 635 3300 332 16 × 15 4700 472 16 × 15 6800 682 10000 103 Cap.(µF) Code V 10 × 12.5 Case size φ D × L (mm) 63 100 160 200 250 400 1J 2A 2C 2D 2E 2G 0.1 0R1 5× 9 0.22 R22 5× 9 3 0.33 R33 5× 9 4.5 0.47 R47 5× 9 1 010 5× 9 12 2.2 2R2 5× 9 17 3.3 3R3 5× 9 25 4.7 4R7 6.3 × 9 32 1.2 6.5 10 100 5 × 9.51 42 6.3 × 9 50 22 220 6.3 × 9.51 71 8× 9 93 33 330 8 × 9.51 100 10 × 9 130 47 470 8 × 9.51 120 10 × 12.5 165 68 680 100 101 150 151 10 × 9.51 215 220 221 12.5 × 12.5 335 330 331 12.5 × 15.5 510 470 471 16 × 15.5 12.5 × 15 265 16 × 15 18 × 15 640 Rated ripple 440 16 × 15 .16 × 15 250 300 • 18 × 15 250 350 .18 × 20 350 18 × 25 420 .18 × 25 420 .18 × 25 510 350 ∆ 18 × 20 ∆ 18 × 20 420 18 × 25 510 .20 × 25 550 • 18 × 15 300 • 18 × 15 200 .∆ 18 × 20 300 540 16 × 15 .16 × 15 • 18 × 15 100 200 18 × 20 250 18 × 25 300 20 × 25 350 Case size Rated ripple φ D × L (mm) Rated ripple current (mArms) at 105˚C 120Hz • Size φ 16 × 20 is available for capacitors marked " " Size φ 20 × 15 is available for capacitors marked " ∆ " Size φ 20 × 20 is available for capacitors marked " " Frequency coefficient of rated ripple current V 6.3 to 100 160 to 400 Cap.(µF) Frequency 0.1 to 47 100 to 470 1000 to 10000 010 to 220 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1 kHz 1.57 1.34 1.13 1.40 10kHz or more 2.00 1.50 1.15 1.60 In this case, 6 will be put at 12th digit of type numbering system. CAT.8100D