ALUMINUM ELECTROLYTIC CAPACITORS PX Long Life Assurance series Load life of 20000 hours at 105°C. Compliant to the RoHS directive (2011/65/EU). PX PM Long Life Specifications Item Performance Characteristitcs Category Temperature Range – 55 to +105˚C 10 to 35V Rated Voltage Range Rated Capacitance Range 1 to 4700µF Capacitance Tolerance ±20% (120Hz, 20˚C) Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) 10 16 25 35 tan δ (MAX) 0.20 0.16 0.14 0.12 Tangent of loss angle (tan δ) Measurement frequency : 120Hz Temperature : 20˚C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Stability at Low Temperature Impedance ratio Z–25˚C / Z+20˚C (MAX.) Z–40˚C / Z+20˚C 10 16 25 35 3 2 2 2 4 4 4 4 The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 20000 hours at 105˚C, the peak voltage shall not exceed the rated voltage. Endurance Measurement frequency : 120Hz Capacitance change Within ±30% of the initial capacitance value tan δ 300% or less than the initial specified value Leakage current Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Radial Lead Type Type numbering system (Example : 16V 220μF) Sleeve (P.E.T.) 1 φd 2 3 4 5 6 7 8 9 10 11 P±0.5 φD+0.5MAX. U P X 1 C 2 2 1 M P D Configuration Capacitance tolerance (±20%) Rated capacitance (220μF) Pressure relief vent Rated voltage (16V) L + 1.5MAX. 15 MIN 4 MIN Series name Type Configuration φD (mm) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8 Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 HD • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS PX series Dimensions V (Code) Item Cap. (μF) Code 10 (1A) Case size φD × L (mm) 16 (1C) Rated ripple (mArms) 105˚C / 100kHz Case size φD × L (mm) 25 (1E) Rated ripple (mArms) 105˚C / 100kHz Case size φD × L (mm) 35 (1V) Rated ripple (mArms) 105˚C / 100kHz Case size φD × L (mm) Rated ripple (mArms) 105˚C / 100kHz 010 10 × 12.5 59 2.2 2R2 10 × 12.5 84 3.3 3R3 10 × 12.5 101 4.7 1 4R7 10 × 12.5 143 10 100 10 × 12.5 294 22 220 10 × 12.5 336 33 330 10 × 12.5 378 47 470 100 101 220 221 10 × 12.5 330 331 10 × 16 470 471 10 × 20 1344 12.5 × 25 1008 16 × 25 672 12.5 × 20 1008 16 × 25 1344 16 × 31.5 1680 1680 18 × 40 2184 18 × 35.5 2016 332 18 × 35.5 2016 18 × 40 2184 472 18 × 40 2184 4700 1008 672 1680 3300 12.5 × 25 504 16 × 31.5 222 840 10 × 16 1344 2200 12.5 × 25 672 10 × 20 16 × 25 102 420 10 × 20 504 1008 1000 10 × 12.5 420 12.5 × 20 16 × 31.5 Frequency coefficient of rated ripple current Frequency 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.75 0.80 0.90 1.00 CAT.8100D