ALUMINUM ELECTROLYTIC CAPACITORS CY Miniature Sized, High Ripple Current, High Reliability series CS High ripple current and Long Life product withstanding load life of 10000 to 12000 hours at +105°C. Suited for ballast application. Compliant to the RoHS directive (2011/65/EU). Smaller CY Specifications Item Performance Characteristics Category Temperature Range – 40 to +105°C (160 to 400V), – 25 to +105°C (420 to 500V) Rated Voltage Range 160 to 500V Rated Capacitance Range 6.8 to 560µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.04CV+100 (µA) Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 160 0.20 200 0.20 250 0.20 350 0.24 400 0.24 420 0.24 450 0.24 500 0.24 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C Z–40°C / Z+20°C 160 3 6 200 3 6 250 3 6 350 5 6 400 5 6 500 6 -- 450 6 -- 420 6 -- Endurance The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 12000 hours (10000 hours for 20L or less, 500V) at 105˚C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 250V 100µF) Radial Lead Type 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U CY 2 E 1 0 1 M HD T Size code Capacitance tolerance (±20%) P ± 0.5 φD+0.5MAX. Configuration Rated capacitance (100µF) Rated voltage (250V) Series name Pressure relief vent L + 1.5 MAX. 15 MIN Type 4 MIN Configuration φD (mm) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8 Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 HD In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm. • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100C ALUMINUM ELECTROLYTIC CAPACITORS CY series Dimensions Cap V 160 200 250 350 400 420 450 Code 2C 2D 2E 2V 2G W6 2W 160 140 150 175 10 × 16 10 × 20 10 × 20 105 135 150 10 × 16 10 × 20 10 × 20 105 135 150 10 × 20 180 10 × 20 180 10 × 25 185 10 × 25 185 10 × 20 215 10 × 25 235 10 × 31.5 215 10 × 25 10 × 20 12.5 × 20 10 × 31.5 10 × 25 10 × 31.5 12.5 × 20 215 255 255 215 325 305 255 10 × 31.5 275 12.5 × 20 285 12.5 × 25 300 360 12.5 × 25 340 12.5 × 25 340 12.5 × 25 385 12.5 × 31.5 400 12.5 × 31.5 400 16 × 20 12.5 × 31.5 12.5 × 25 16 × 20 12.5 × 31.5 18 × 20 12.5 × 35.5 16 × 25 18 × 20 12.5 × 40 16 × 25 18 × 25 450 465 385 520 510 590 630 585 600 720 640 735 16 × 20 385 12.5 × 31.5 430 12.5 × 35.5 16 × 25 18 × 20 505 500 480 12.5 × 40 570 6R8 100 120 10 × 16 15 150 18 180 220 10 × 16 225 10 × 16 225 27 270 10 × 16 235 10 × 20 255 33 330 10 × 20 305 10 × 20 39 47 390 470 56 560 68 680 82 100 120 820 101 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 680 561 681 10 × 16 10 × 16 260 295 10 × 20 325 10 × 20 360 305 12.5 × 20 380 12.5 × 20 400 16 × 20 450 10 × 25 345 12.5 × 25 455 12.5 × 25 510 16 × 20 540 10 × 31.5 405 345 10 × 25 490 12.5 × 20 10 × 20 375 12.5 × 20 490 10 × 20 380 10 × 25 415 12.5 × 20 515 10 × 25 455 10 × 31.5 485 12.5 × 25 615 12.5 × 20 590 12.5 × 20 650 16 × 20 650 534 455 12.5 × 25 12.5 × 20 645 645 12.5 × 20 640 16 × 20 690 12.5 × 20 645 12.5 × 25 16 × 20 16 × 20 695 710 775 10 × 31.5 10 × 25 12.5 × 25 12.5 × 31.5 12.5 × 25 16 × 20 16 × 20 12.5 × 31.5 12.5 × 35.5 12.5 × 40 12.5 × 35.5 16 × 25 18 × 20 18 × 25 12.5 × 40 16 × 31.5 18 × 25 16 × 40 16 × 35.5 18 × 31.5 18 × 35.5 16 × 40 18 × 40 18 × 46 760 905 760 945 1000 905 1050 1200 1050 1185 1105 1235 1300 1510 1445 1730 1510 1695 1920 1730 2130 2300 12.5 × 31.5 810 12.5 × 35.5 16 × 25 18 × 20 12.5 × 40 16 × 25 18 × 20 16 × 31.5 12.5 × 40 965 945 910 1090 1035 910 1230 1090 18 × 25 1185 16 × 35.5 18 × 31.5 16 × 40 18 × 31.5 18 × 40 1400 1410 1595 1560 1780 12.5 × 31.5 715 12.5 × 25 615 16 × 20 690 16 × 20 12.5 × 35.5 16 × 25 12.5 × 35.5 12.5 × 40 18 × 20 18 × 25 715 785 845 785 890 815 970 12.5 × 40 990 16 × 31.5 1110 18 × 25 1050 16 × 40 1295 16 × 35.5 1220 18 × 31.5 1160 18 × 35.5 16 × 40 18 × 46 18 × 40 2H 10 × 16 10 × 16 10 × 20 6.8 10 12 22 500 12.5 × 31.5 590 16 × 20 565 12.5 × 35.5 16 × 25 18 × 20 16 × 31.5 12.5 × 40 16 × 25 18 × 25 16 × 31.5 18 × 25 16 × 35.5 695 700 690 740 785 700 765 825 790 925 18 × 31.5 940 18 × 35.5 1080 12.5 × 20 16 × 20 12.5 × 35.5 18 × 20 12.5 × 40 385 460 440 525 16 × 25 500 16 × 31.5 585 18 × 25 560 16 × 31.5 645 18 × 25 615 16 × 35.5 660 805 16 × 35.5 725 16 × 40 18 × 25 765 18 × 31.5 730 18 × 31.5 730 16 × 35.5 18 × 31.5 18 × 31.5 16 × 40 850 875 940 950 16 × 40 18 × 35.5 18 × 40 825 835 930 18 × 40 930 18 × 35.5 18 × 46 945 18 × 46 945 960 16 × 31.5 16 × 40 1000 18 × 40 1030 18 × 40 1205 18 × 46 1110 18 × 46 1300 12.5 × 20 12.5 × 25 16 × 20 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 18 × 20 12.5 × 40 16 × 25 16 × 31.5 160 220 220 240 240 280 280 280 310 310 350 18 × 25 350 16 × 35.5 380 16 × 40 440 18 × 31.5 440 18 × 35.5 480 18 × 40 525 750 18 × 35.5 835 1450 1350 1600 1530 18 × 35.5 1690 18 × 40 18 × 46 1850 1900 Case size φD × L (mm) : Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current : In this case, 6 will be put at 12th digit of type numbering system. Frequency 50Hz 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.80 1.00 1.60 1.80 2.00 : In this case, 3 will be put at 12th digit of type numbering system. : In this case, 9 will be put at 12th digit of type numbering system. CAT.8100C