RENESAS HD74LS158FPEL

HD74LS158
Quadruple 2-line-to-1-line Data Selectors / Multiplexers
(inverted outputs)
REJ03D0443–0200
Rev.2.00
Feb.18.2005
This data selector / multiplexer contains inverters and drivers to supply full on-chip data selection to the four output
gates. A separate strobe input is provided. A 4-bit word is selected from one of two sources and is routed to the four
outputs. Then, outputs present inverted data to minimize propagation delay time.
Features
• Ordering Information
Part Name
Package Type
Package Code
(Previous Code)
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74LS158FPEL
SOP-16 pin (JEITA)
PRSP0016DH-B
(FP-16DAV)
FP
EL (2,000 pcs/reel)
Note: Please consult the sales office for the above package availability.
Pin Arrangement
Select
1
16
VCC
S
1A
2
1A
G
15
S
1B
3
1B
4A
14
4A
1Y
4
1Y
4B
13
4B
2A
5
2A
4Y
12
4Y
2B
6
2B
3A
11
3A
2Y
7
2Y
3B
10
3B
GND
8
9
3Y
Inputs
Output
Inputs
Output
3Y
Inputs
Output
Inputs
Output
(Top view)
Function Table
Inputs
Strobe
Select
H
X
L
L
L
L
L
H
L
H
H ; high level, L ; low level, X ; irrelevant
Rev.2.00, Feb.18.2005, page 1 of 5
A
X
L
H
X
X
B
X
X
X
L
H
Output
Y
H
H
L
H
L
HD74LS158
Block Diagram
1A
1Y
1B
2A
Data
Inputs
2Y
2B
Outputs
3A
3Y
3B
4A
4Y
4B
Strobe G
Select S
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage
VCC
7
V
Input voltage
VIN
7
V
Power dissipation
PT
400
mW
Tstg
–65 to +150
°C
Storage temperature
Note: Voltage value, unless otherwise noted, are with respect to network ground terminal.
Recommended Operating Conditions
Item
Supply voltage
Output current
Operating temperature
Rev.2.00, Feb.18.2005, page 2 of 5
Symbol
Min
Typ
Max
Unit
VCC
4.75
5.00
5.25
V
IOH
—
—
–400
µA
IOL
—
—
8
mA
Topr
–20
25
75
°C
HD74LS158
Electrical Characteristics
(Ta = –20 to +75 °C)
Item
Input voltage
Symbol
VIH
VIL
min.
2.0
—
typ.*
—
—
max.
—
0.8
Unit
V
V
VOH
2.7
—
—
V
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.4
0.5
40
20
–0.8
–0.4
0.2
0.1
Output voltage
VOL
Input current
G, S
A, B
G, S
A, B
G, S
A, B
IIH
IIL
II
V
Condition
VCC = 4.75 V, VIH = 2 V, VIL = 0.8 V,
IOH = –400 µA
IOL = 4 mA
VCC = 4.75 V, VIH = 2 V,
VIL = 0.8 V
IOL = 8 mA
µA
VCC = 5.25 V, VI = 2.7 V
mA
VCC = 5.25 V, VI = 0.4 V
mA
VCC = 5.25 V, VI = 7 V
Short-circuit output
–20
—
–100
mA
IOS
current
Supply current**
ICC
—
4.8
8
mA
Input clamp voltage
VIK
—
—
–1.5
V
Notes: * VCC = 5 V, Ta = 25°C
** ICC is measured with all outputs open and all inputs at 4.5 V.
VCC = 5.25 V
VCC = 5.25 V
VCC = 4.75 V, IIN = –18 mA
Switching Characteristics
(VCC = 5 V, Ta = 25°C)
Item
Propagation delay time
Symbol
tPLH
tPHL
tPLH
tPHL
tPLH
tPHL
Rev.2.00, Feb.18.2005, page 3 of 5
Inputs
Output
Data
Y
Strobe
Y
Select
Y
min.
—
—
—
—
—
—
typ.
7
7
11
12
13
16
max.
12
12
17
18
20
24
Unit
Condition
ns
ns
ns
CL = 15 pF, RL = 2 kΩ
HD74LS158
Testing Method
Test Circuit
VCC
4.5V
Output
RL
1A
1B
2A
2B
3A
3B
4A
4B
See Function Table
Input
P.G.
Zout = 50Ω
1Y
CL
Output
2Y
Same as Load Circuit 1.
Output
3Y
Same as Load Circuit 1.
G
S
Output
4Y
Notes:
Load circuit 1
Same as Load Circuit 1.
1. CL includes probe and jig capacitance.
2. All diodes are 1S2074(H).
Waveform
tTLH
tTHL
90%
1.3 V
Input
3V
90%
1.3 V
10%
10%
0V
tPHL
tPLH
VOH
In phase output
1.3 V
1.3 V
VOL
tPHL
tPLH
VOH
Out of phase output
1.3 V
1.3 V
VOL
Note:
Input pulse; tTLH ≤ 15 ns, tTHL ≤ 6 ns, PRR = 1 MHz, duty cycle 50%
Rev.2.00, Feb.18.2005, page 4 of 5
HD74LS158
Package Dimensions
JEITA Package Code
P-SOP16-5.5x10.06-1.27
RENESAS Code
PRSP0016DH-B
*1
Previous Code
FP-16DAV
MASS[Typ.]
0.24g
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
D
F
16
9
c
HE
*2
E
bp
Index mark
Reference
Symbol
Terminal cross section
( Ni/Pd/Au plating )
1
Z
*3
bp
Nom
D
10.06
E
5.50
Max
10.5
A2
8
e
Dimension in Millimeters
Min
x
A1
M
0.00
0.10
0.34
0.40
0.46
0.15
0.20
0.25
7.80
8.00
A
L1
0.20
2.20
bp
b1
c
A
c
A1
θ
y
L
Detail F
1
θ
0°
HE
7.50
e
1.27
x
0.12
y
0.15
0.80
Z
L
L
Rev.2.00, Feb.18.2005, page 5 of 5
8°
0.50
1
0.70
1.15
0.90
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits,
(ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .2.0