ALUMINUM ELECTROLYTIC CAPACITORS CA Miniature Sized, High Ripple Current, Long Life series High ripple current and Long Life product withstanding load life of 12000 hours(10000 hours for φD=10) at +105°C. Suited for ballast application. Compliant to the RoHS directive (2011/65/EU). CA PT Long Life Smaller CS Specifications Item Performance Characteristics Category Temperature Range –25 to +105°C Rated Voltage Range 160 to 450V Rated Capacitance Range 6.8 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA) Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 160 0.15 200 0.15 250 0.15 350 0.20 400 0.20 450 0.20 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 160 3 200 3 250 3 350 6 400 6 450 6 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 12000 hours (10000 hours for φD=10) at 105°C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 250V 100µF) Radial Lead Type 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U CA 2 E 1 0 1 M HD T Size code Capacitance tolerance (±20%) P±0.5 φD+0.5MAX. Configuration Rated capacitance (100µF) Rated voltage (250V) Series name Pressure relief vent L + 1.5MAX. 15 MIN Type 4 MIN Configuration φD (mm) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8 Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 HD • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS CA series Dimensions Cap. (µF) 6.8 V 160 200 250 350 400 450 Code 2C 2D 2E 2V 2G 2W 6R8 10 × 16 220 10 × 16 220 10 × 20 150 10 100 10 × 16 250 10 × 16 250 10 × 20 300 10 × 20 280 10 × 20 280 12.5 × 20 320 22 220 10 × 20 500 10 × 20 500 12.5 × 20 600 12.5 × 20 350 12.5 × 20 430 16 × 25 560 16 × 20 600 18 × 20 560 16 × 25 640 16 × 31.5 700 18 × 20 640 18 × 25 700 18 × 31.5 900 33 47 68 100 150 220 330 470 680 101 151 221 10 × 20 12.5 × 20 565 12.5 × 20 725 600 12.5 × 20 780 12.5 × 20 630 16 × 20 600 12.5 × 25 720 16 × 25 700 16 × 31.5 840 16 × 20 750 18 × 20 750 18 × 25 840 18 × 31.5 1000 12.5 × 25 950 12.5 × 25 950 16 × 25 1000 16 × 31.5 1100 16 × 20 970 16 × 20 970 18 × 20 920 18 × 25 875 16 × 25 1280 16 × 25 1280 16 × 31.5 1400 18 × 20 1180 18 × 20 1180 18 × 25 1345 16 × 31.5 1360 16 × 31.5 1360 18 × 25 1360 18 × 31.5 1500 18 × 25 1360 16 × 31.5 1400 18 × 25 1400 18 × 31.5 1700 Case size φD × L (mm) : Rated ripple current (mArms) at 105°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.40 0.50 0.80 0.90 1.00 CAT.8100D