ALUMINUM ELECTROLYTIC CAPACITORS PZ High Voltage, Miniature-sized series PT High ripple current. Load life of 2000 hours at 105°C. Suited for ballast applications. Compliant to the RoHS directive (2011/65/EU). Smaller PZ Smaller PH Specifications Item Performance Characteristics Category Temperature Range –25 to +105°C Rated Voltage Range 200 to 450V Rated Capacitance Range 18 to 470µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA). Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) 200 0.12 Rated voltage (V) tan δ (MAX.) 250 0.15 400 0.15 420 0.20 450 0.20 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 200 3 250 3 400 8 420 8 450 8 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Type numbering system (Example : 200V 220µF) Radial Lead Type φd 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 Size code P±0.5 φD±0.5 MAX. U P Z 2 D 2 2 1 M HD T Configuration Capacitance tolerance (±20%) (mm) Pressure relief vent L+ 2.0 MAX. 15MIN 4MIN Rated capacitance (220µF) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 Rated voltage (200V) φd 0.6 0.8 0.8 0.8 Series name Type Pencil - shaped Type Configuration Size code φD 10 φd Sleeve (P.E.T.) Pressure relief vent 9 PD ND HD NY P±0.5 φD±0.5 MAX. 12.5 to 18 Blank, 6 Pb-free leadwire Pb-free PET sleeve L+ 2.0 MAX. 15MIN 4MIN (mm) φD 10 12.5 P 5.0 5.0 φd 0.6 0.6 • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS PZ series Dimensions Cap.(µF) V 200 400 420 Code 2D 2G W6 450 2W 18 180 22 220 27 270 33 330 39 390 12.5 × 31.5 310 47 470 12.5 × 31.5 370 12.5 × 35.5 56 560 12.5 × 35.5 420 68 680 12.5 × 40.0 480 82 820 .010 × 31.5 400 100 101 120 121 150 151 12.5 × 31.5 620 180 181 12.5 × 35.5 220 221 270 271 330 331 390 391 470 471 .010 × 31.5 240 .016 × 31.5 580 .016 × 35.5 670 .018 × 31.5 670 .010 × 31.5 180 12.5 × 31.5 280 12.5 × 35.5 320 360 12.5 × 40.0 380 12.5 × 40.0 430 .016 × 31.5 440 .016 × 31.5 510 .016 × 35.5 490 .016 × 40.0 550 .018 × 31.5 550 .010 × 31.5 200 .016 × 35.5 570 .016 × 40.0 610 .018 × 31.5 610 .018 × 35.5 650 .018 × 35.5 660 .018 × 40.0 740 .018 × 40.0 710 .016 × 40.0 770 .018 × 35.5 770 700 .018 × 40.0 880 12.5 × 40.0 800 .016 × 31.5 870 .016 × 35.5 1010 .018 × 31.5 1010 .016 × 40.0 1130 .018 × 35.5 1120 .018 × 40.0 1270 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 105°C 120Hz : In this case, 6 will be put at 12th digit of type numbering system. Pencil-shaped Type Cap.(µF) V 200 250 400 Code 2D 2E 2G 450 33 330 47 470 .010 × 40.0 435 56 560 .010 × 50.0 520 82 820 100 101 12.5 × 50 770 120 121 .010 × 40.0 680 150 151 .010 × 50.0 830 220 221 270 271 12.5 × 50 .010 × 40.0 .010 × 50.0 12.5 × 50 1265 610 2W .010 × 40.0 360 .010 × 50.0 450 12.5 × 50 730 740 1140 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 105°C 120Hz : In this case, 9 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current V 60Hz 120Hz 500Hz 1kHz 10kHz or more 200 0.80 1.00 1.20 1.30 1.40 400 to 450 0.80 1.00 1.25 1.40 1.50 CAT.8100D