PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com SMD QUARTZ CRYSTAL SERIES SMD02502 (4 pad housing 2.5x2.0mm) FEATURES + + + + + Tight tolerance / tight stability available High reliability for low cost Low profile – 0.6 mm package height Ultra miniature size and lightweight Excellent clock signal generator for CPU´s PB FREE / ROHS-2 2011/65/EU COMPLIANT GENERAL DATA PARAMETERS PRODUCT FEATURES AND CONDITIONS SMD-CRYSTAL SERIES SMD02502/4 NUMBER OF SOLDER PADS 4 FREQUENCY RANGE 12.0 ~ 125.0 MHz AT-Fundamental (please ask if your required frequency is developed) FREQUENCY TOLERANCES AT 25°C ±10 ppm ~ ±50 ppm LOAD CAPACITANCE (CL) Series, 8 pF, 10 pF, 12 pF (other CL on request) WORKING TEMPERATURE RANGES 0/+50°C ~ -40/+85°C SHUNT CAPACITANCE (Co) 7 pF max. DRIVE LEVEL 10 μW (100 μW max.) AGING ±3 ppm per year standard (±1 or ±2 ppm available on request) INSULATION RESISTANCE >500 MΩ DC/100V ±10% STORAGE TEMPERATURE -55°/+125°C DELIVERY FORM Tape and Reel (3.000 pcs per reel) OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION FREQUENCY STABILITY VS. TEMPERATURE ±8ppm ±10ppm ±12ppm ±15ppm ±20ppm ±30ppm ±50ppm 0°/+50°C + + + + + + + -10°/+60°C + + + + + + + 0°/+70°C + + + + + + + + + + + + + + + + + -20°/+70°C -40°/+85°C CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 1 OF 4 I SPEC 01 I REV.00 I MARCH 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com DIMENSIONS REEL SPECIFICATION REFLOW SOLDER PROFILE CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 2 OF 4 I SPEC 01 I REV.00 I MARCH 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com RESONANCE RESISTANCE FREQUENCY IN MHz VIBRATION MODE ESR MAX. IN Ω 12 MHz AT Fund. 200 13.0 ~ 16.0 MHz AT Fund. 100 16.0 ~ 20.0 MHz AT Fund. 80 20.0 ~ 30.0 MHz AT Fund. 60 30.0 ~ 100.0 MHz AT Fund. 40 ORDERING INFORMATION SERIES SMD02502/4 FREQUENCY 12.0 ~ 125.0 MHz AT-Fundamental FREQUENCY TOLERANCE AT 25°C ±10 PPM ~ ±50 PPM TEMPERATURE RANGE 0°/+50°C -10°/+60°C 0°/+70°C -20°/+70°C -40°/+85°C SMD02502/4 60.000 MHz 10/15/-40+85/10pF TEMPERATURE STABILITY See Table „FREQUENCY STABILITY VS. TEMPERATURE“ LOAD CAPACITANCE Series, 8 pF, 10 pF, 12 pF (other CL on request) EXAMPLE: SMD02502/4 60.000 MHz 10/15/-40+85/10pF PLEASE INDICATE YOUR REQUIRED PARAMETERS CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 3 OF 4 I SPEC 01 I REV.00 I MARCH 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com PREMIUM QUALITY BY PETERMANN-TECHNIK OUR COMPANY IS CERTIFIED ACCORDING TO ISO 9001:2008 IN OCTOBER 2013 BY THE DMSZ CERTIFIKATION GMBH. THIS IS FOR YOU TO ENSURE THAT THE PRINCIPLES OF QUALITY MANAGEMENT ARE FULLY IMPLEMENTED IN OUR QUALITY MANAGEMENT SYSTEM AND QUALITY CONTROL METHODS ALSO DOMINATE OUR QUALITY STANDARDS. © PETERMANN-TECHNIK GmbH 2015. The information contained herein is subject to change at any time without notice. PETERMANN-TECHNIK owns all rights, title and interest to the intellectual property related to PETERMANN-TECHNIK's products, including any software, firmware, copyright, patent, or trademark. The sale of PETERMANN-TECHNIK products does not convey or imply any license under patent or other rights. PETERMANNTECHNIK retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or services by PETERMANN-TECHNIK. Unless otherwise agreed to in writing by PETERMANN-TECHNIK, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited. CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 4 OF 4 I SPEC 01 I REV.00 I MARCH 2015