PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com SMD QUARTZ CRYSTAL SERIES UM1/UM5-SMD CLIP FEATURES + High reliability for low cost + Tight frequency stabilities possible + Extended temperature range to –40/+125°C available + Excellent clock signal generator for CPU´s + Cheapest available crystal with tight tolerances up to 200 MHz ROHS-2 2011/65/EU COMPLIANT GENERAL DATA PARAMETERS PRODUCT FEATURES AND CONDITIONS SMD-CRYSTAL SERIES UM1/UM5 NUMBER OF LEADS 2 = standard 3 = optional FREQUENCY RANGE 6.0 ~ 45.0 MHz AT-FUNDAMENTAL 30.0 ~ 100.0 MHz 3rd Overtone 80.0 ~ 155.0 MHZ 5th Overtone 120.0 ~ 200.0 MHz 7th Overtone FREQUENCY TOLERANCES AT 25°C ±5 ppm ~ ±50 ppm RESONANCE RESISTANCE 60 Ω Max. ~ 120 Ω Max. LOAD CAPACITANCE (CL) 6 pF ~ 50 pF or Series WORKING TEMPERATURE RANGES 0/+50°C ~ -40/+125°C SHUNT CAPACITANCE (C0) 7 pF max. DRIVE LEVEL 100 μW typical (0.07 mW ~ 1 mW possible on request) AGING ±3 ~ ±5 ppm per year standard (±1 or ±2 ppm available as option) INSULATION RESISTANCE >500 MΩ DC/100V ±10% STORAGE TEMPERATURE -55°/+125°C DELIVERY FORM Tape and Reel (1.000 pcs per reel) OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION FREQUENCY STABILITY VS. TEMPERATURE ±3ppm ±5ppm ±10ppm ±20ppm ±30ppm ±50ppm 0°/+50°C + + + + + + -10°/+60°C + + + + + + 0°/+70°C + + + -20°/+70°C + + + + + + + + + -40°/+85°C -40°/+125°C CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS + + PAGE 1 OF 4 I SPEC 01 I REV.00 I MAY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com DIMENSIONS OF UM1-SMD-CLIP DIMENSIONS OF UM5-SMD-CLIP CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 2 OF 4 I SPEC 01 I REV.00 I MAY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com RESONANCE RESISTANCE FREQUENCY IN MHZ VIBRATION MODE ESR MAX. IN Ω 6.0 ~ 45.0 MHz AT Fund. 60 ~ 120 30.0 ~ 100.0 MHz 3rd Overtone 60 ~ 120 80.0 ~ 155.0 MHz 5th Overtone 60 ~ 120 120.0 ~ 200.0 MHz 7th Overtone 60 ~ 120 ORDERING INFORMATION SERIES UM1-SMD OR UM5-SMD FREQUENCY 6.0 ~ 45.0 MHZ AT-FUNDAMENTAL 30.0 ~ 100.0 MHZ 3rd OVERTONE 80.0 ~ 155.0 MHZ 5th OVERTONE 120.0 ~ 200.0 MHZ 7th OVERTONE FREQUENCY TOLERANCE AT 25°C ±5 PPM ~ ±50 PPM TEMPERATURE RANGES 0°/+50°C -10°/+60°C 0°/+70°C -20°/+70°C -40°/+85°C -40°/+125°C UM1-SMD 27.000 MHz 5/5/-10+60/20pF TEMPERATURE STABILITY LOAD CAPACITANCE 6 pF ~ 50 PF or series See Table „FREQUENCY STABILITY VS. TEMPERATURE“ EXAMPLE: UM1-SMD 27.000 MHz 5/5/-10+60/20pF PLEASE INDICATE YOUR REQUIRED PARAMETERS CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 3 OF 4 I SPEC 01 I REV.00 I MAY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com PREMIUM QUALITY BY PETERMANN-TECHNIK OUR COMPANY IS CERTIFIED ACCORDING TO ISO 9001:2008 IN OCTOBER 2013 BY THE DMSZ CERTIFIKATION GMBH. THIS IS FOR YOU TO ENSURE THAT THE PRINCIPLES OF QUALITY MANAGEMENT ARE FULLY IMPLEMENTED IN OUR QUALITY MANAGEMENT SYSTEM AND QUALITY CONTROL METHODS ALSO DOMINATE OUR QUALITY STANDARDS. © PETERMANN-TECHNIK GmbH 2015. The information contained herein is subject to change at any time without notice. PETERMANN-TECHNIK owns all rights, title and interest to the intellectual property related to PETERMANN-TECHNIK's products, including any software, firmware, copyright, patent, or trademark. The sale of PETERMANN-TECHNIK products does not convey or imply any license under patent or other rights. PETERMANNTECHNIK retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or services by PETERMANN-TECHNIK. Unless otherwise agreed to in writing by PETERMANN-TECHNIK, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited. CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 4 OF 4 I SPEC 01 I REV.00 I MAY 2015