PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com SMD QUARTZ CRYSTAL SERIES SMD0603/2 (2 pad housing 6.0x3.5mm) FEATURES + + + + + High reliability for low cost All ceramic epoxy sealed SMD package Low profile—1.1 mm max. package height Extended temperature range to –40/+85°C available Excellent clock generator for CPU's, Wireless, Mobile Comm., etc. ROHS-2 2011/65/EU COMPLIANT GENERAL DATA PARAMETERS PRODUCT FEATURES AND CONDITIONS SMD-CRYSTAL SERIES SMD0603/2 NUMBER OF SOLDER PADS 2 Please do not use this package for new design. Please use SMD0603/4 for new design. FREQUENCY RANGE 11.0592 ~ 40.0 MHz AT-Fundamental FREQUENCY TOLERANCES AT 25°C ±20 ppm ~ ±50 ppm LOAD CAPACITANCE (CL) 10 pF ~ 30 pF or Series WORKING TEMPERATURE RANGE 0/+50°C ~ -40/+125°C SHUNT CAPACITANCE (Co) 7.0 pF max. DRIVE LEVEL 0.1 mW max. standard (optional 0.5 mW available) AGING ±5 ppm per year standard INSULATION RESISTANCE >500 MΩ DC/100V ±10% STORAGE TEMPERATURE -55°/+125°C DELIVERY FORM Tape and Reel (1.000 pcs per reel) OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION FREQUENCY STABILITY VS. TEMPERATURE ±15ppm ±20ppm ±30ppm ±50ppm 0°/+50°C + + + + -10°/+60°C + + + + 0°/+70°C + + + + -20°/+70°C + + + + + + + -40°/+85°C CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 1 OF 4 I SPEC 01 I REV.00 I MAY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com DIMENSIONS OF SMD0603/2 REEL SPECIFICATION REFLOW SOLDER PROFILE RESONANCE RESISTANCE FREQUENCY IN MHz VIBRATION MODE ESR MAX. IN Ω 11.0592 ~ 16.0 MHz AT Fund. 60 16.0 ~ 40.0 MHz AT Fund. 30 CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 2 OF 4 I SPEC 01 I REV.00 I MAY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com ORDERING INFORMATION SERIES SMD0603/2 FREQUENCY 11.0592 ~ 40.0 MHz AT-Fundamental FREQUENCY TOLERANCE AT 25°C ±20 PPM ~ ±50 PPM TEMPERATURE RANGE 0°/+50°C -10°/+60°C -20°/+70°C -40°/+85°C SMD0603/2 27.000 MHz 30/50/-40+85/20pF TEMPERATURE STABILITY See Table „FREQUENCY STABILITY VS. TEMPERATURE“ LOAD CAPACITANCE 10 pF ~ 30 pF or Series EXAMPLE: SMD0603/2 27.000 MHz 30/50/-40+85/20pF PLEASE INDICATE YOUR REQUIRED PARAMETERS CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 3 OF 4 I SPEC 01 I REV.00 I MAY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com PREMIUM QUALITY BY PETERMANN-TECHNIK OUR COMPANY IS CERTIFIED ACCORDING TO ISO 9001:2008 IN OCTOBER 2013 BY THE DMSZ CERTIFIKATION GMBH. THIS IS FOR YOU TO ENSURE THAT THE PRINCIPLES OF QUALITY MANAGEMENT ARE FULLY IMPLEMENTED IN OUR QUALITY MANAGEMENT SYSTEM AND QUALITY CONTROL METHODS ALSO DOMINATE OUR QUALITY STANDARDS. © PETERMANN-TECHNIK GmbH 2015. The information contained herein is subject to change at any time without notice. PETERMANN-TECHNIK owns all rights, title and interest to the intellectual property related to PETERMANN-TECHNIK's products, including any software, firmware, copyright, patent, or trademark. The sale of PETERMANN-TECHNIK products does not convey or imply any license under patent or other rights. PETERMANNTECHNIK retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or services by PETERMANN-TECHNIK. Unless otherwise agreed to in writing by PETERMANN-TECHNIK, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited. CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 4 OF 4 I SPEC 01 I REV.00 I MAY 2015