PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com SMD QUARTZ CRYSTAL SERIES SMD03025/4CC FEATURES + High reliability for low cost + Cheapest available MINI-SMD-XTAL + Ceramic body with glass sealed ceramic cover + Excellent clock signal generator for CPU´s ROHS-2 2011/65/EU COMPLIANT GENERAL DATA PARAMETERS PRODUCT FEATURES AND CONDITIONS SMD-CRYSTAL SERIES SMD03025/4CC NUMBER OF SOLDER PINS 4 FREQUENCY RANGE 8.0 ~ 64.0 MHz AT-FUNDAMENTAL (please ask if your required frequency is developed) FREQUENCY TOLERANCES AT 25°C ±15 ppm ~ ±50 ppm LOAD CAPACITANCE (CL) 7 pF ~ 30 pF (other parameters deliverable on request) WORKING TEMPERATURE RANGES 0/+50°C ~ -40/+85°C SHUNT CAPACITANCE (C0) 6 pF max. DRIVE LEVEL 100 μW max. (other parameters available on request) AGING ±3 ppm per year standard INSULATION RESISTANCE >500 MΩ DC/100V ±10% STORAGE TEMPERATURE -55°/+125°C DELIVERY FORM Tape and Reel (3.000 pcs per reel) (3.2x2.5x0.9mm) OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION FREQUENCY STABILITY VS. TEMPERATURE ±10ppm ±15ppm ±20ppm ±30ppm ±50ppm 0°/+50°C + + + + + -10°/+60°C + + + + + -20°/+70°C + + + + + + + + + -40°/+85°C CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 1 OF 4 I SPEC 01 I REV.00 I MARCH 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com DIMENSIONS REEL SPECIFICATION REFLOW SOLDER PROFILE CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 2 OF 4 I SPEC 01 I REV.00 I MARCH 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com RESONANCE RESISTANCE FREQUENCY IN MHZ VIBRATION MODE ESR MAX. IN Ω 8.0 ~ 9.0 MHz AT Fund. 400 9.0 ~ 9.8 MHz AT Fund. 300 9.8 ~ 11.0 MHz AT Fund. 150 11.0 ~ 13.0 MHz AT Fund. 100 13.0 ~ 20.0 MHz AT Fund. 80 20.0 ~ 27.0 MHz AT Fund. 60 27.0 ~ 64.0 MHz AT Fund. 50 64.0 ~ 80.0 MHz AT Fund. 40 ORDERING INFORMATION SERIES SMD03025/4CC FREQUENCY FREQUENCY TOLERANCE AT 25°C 8.0 ~ 64.0 MHz AT-Fundamental TEMPERATURE RANGES 0°/+50°C -10°/+60°C 0°/+70°C -20°/+70°C -40°/+85°C ±15 PPM ~ ±50 PPM SMD03025/4CC 32.000 MHz 30/50/-40+85/12pF TEMPERATURE STABILITY LOAD CAPACITANCE 7 pF ~ 30 pF or Series See Table „FREQUENCY STABILITY VS. TEMPERATURE“ EXAMPLE: SMD03025/4CC 32.000 MHz 30/50/-40+85/12pF PLEASE INDICATE YOUR REQUIRED PARAMETERS CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 3 OF 4 I SPEC 01 I REV.00 I MARCH 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com PREMIUM QUALITY BY PETERMANN-TECHNIK OUR COMPANY IS CERTIFIED ACCORDING TO ISO 9001:2008 IN OCTOBER 2013 BY THE DMSZ CERTIFIKATION GMBH. THIS IS FOR YOU TO ENSURE THAT THE PRINCIPLES OF QUALITY MANAGEMENT ARE FULLY IMPLEMENTED IN OUR QUALITY MANAGEMENT SYSTEM AND QUALITY CONTROL METHODS ALSO DOMINATE OUR QUALITY STANDARDS. © PETERMANN-TECHNIK GmbH 2015. The information contained herein is subject to change at any time without notice. PETERMANN-TECHNIK owns all rights, title and interest to the intellectual property related to PETERMANN-TECHNIK's products, including any software, firmware, copyright, patent, or trademark. The sale of PETERMANN-TECHNIK products does not convey or imply any license under patent or other rights. PETERMANNTECHNIK retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or services by PETERMANN-TECHNIK. Unless otherwise agreed to in writing by PETERMANN-TECHNIK, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited. CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 4 OF 4 I SPEC 01 I REV.00 I MARCH 2015