Datasheet - Petermann

PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
MINIATURE LOW COST SMD-LPXO
SERIES “LPXO“
FEATURES
+
+
+
+
+
High reliability for low cost
Cheapest available SMD-LOW-POWER-OSCILLATOR
Available in 1.8, 2.6, 2.8, 3.0 and 3.3 VDC
New standard for low cost SMD-LPXOs
Extended temperature range to -40/+85°C available
PB FREE / ROHS-2 2011/65/EU COMPLIANT
GENERAL DATA
PARAMETERS
PRODUCT FEATURES AND CONDITIONS
SMD-OSCILLATOR SERIES
LPXO
PACKAGE
FREQUENCY RANGE
LPXO2016
2.0 x 1.6x 0.6 mm3
LPXO2520
2.5 x 2.0x 0.8 mm3
LPXO3225
3.2 x 2.5 x 0.9 mm3
LPXO2016
13.0 ~ 52.0 MHz
LPXO2520
9.6 ~ 52.0 MHz
LPXO3225
9.6 ~ 52.0 MHz
OPERATING TEMPERATURE RANGE
-10/+60°C ~ -40/+85°C
STORAGE TEMPERATURE RANGE
-55/+125°C
STANDARD FREQUENCY
13 / 19.2 / 20 / 25 / 26 / 30 / 32 / 38.4 / 40 / 52 MHz
Other frequencies are available on request.
SUPPLY VOLTAGE (VDD)
+1.8V / +2.6V / +2.8V / +3.0V / +3.3V
+1.5 mA max. (f ≤ 26 MHz)
CURRENT CONSUMPTION
+2.0 mA max. (f > 26 MHz)
0.8 Vp-p min. (Clipped Sinewave / DC-coupled)
OUTPUT LEVEL
10kΩ // 10pF
OUTPUT LOAD
FREQUENCY
STABILITY
INITIAL TOLERANCE
± 1.5 ppm max. (after 2 reflows)
VS. TEMPERATURE
± 2.0 ~ 10 ppm max. / -30~+85°C
± 2.5 ~ 10 ppm max. / -40~+85°C
Other parameters are available on request
VS. SUPPLY VOLTAGE
± 0.2 ppm max. (VDD±5%)
VS. LOAD VARIATION
± 0.2 ppm max. (10kΩ // 10pF±10%)
VS. AGING
±1.0 ppm max. / year
Start–up Time
2.0 ms max.
Phase Noise
[f ≤ 15MHz] [15<f≤26MHz][26MHz<f≤40MHz]
Offset 100Hz
-115dBc/Hz -110dBc/Hz -105dBc/Hz
Offset 1kHz
-135dBc/Hz -130dBc/Hz -125dBc/Hz
Offste 10kHz
-145dBc/Hz -140dBc/Hz -135dBc/Hz
Offset 100kHz
-145dBc/Hz -145dBc/Hz -145dBc/Hz
DELIVERY FORM
Tape and Reel / 2.000 pcs. per reel, lower QTY possible
OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 1 OF 6 I SPEC 01 I REV.00 I JULY 2015
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
OUTLINE DRAWING OF LPXO2016
OUTLINE DRAWING OF LPXO2520
OUTLINE DRAWING OF LPXO3225
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 2 OF 6 I SPEC 01 I REV.00 I JULY 2015
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
TEST CIRCUIT CLIPPED SINEWAVE (GROUND STANDARD VERSION)
TEST CIRCUIT CLIPPED SINEWAVE (OUTPUT ENABLE VERSION)
REEL SOLDER PROFILE
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 3 OF 6 I SPEC 01 I REV.00 I JULY 2015
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
REEL SPECIFICATION OF LPXO2016
REEL SPECIFICATION OF LPXO2520
REEL SPECIFICATION OF LPXO3225
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 4 OF 6 I SPEC 01 I REV.00 I JULY 2015
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
ORDERING INFORMATION
SERIES
LPXO2016
LPXO2520
LPXO3225
SUPPLY VOLTAGE
18/26 /28/30/33
FREQUENCY
TEMPERATURE
RANGE
OUTPUT SIGNAL
32.000MHz
or ON REQUEST
W=-40°/+85°C
K=-30°/+85°C
M=-20°/+70°C
BLANK= 0°/+70°C
Clipped Sinewave
LPXO2520-18-2.5-E-W-32M-1-CSW
TEMPERATURE
STABILITY
2.5 or ON REQUEST
STAND-BY FUNCTION
BLANK=Without E/D
Function
E=With E/D Function
AGING
1=±1.0 ppm max.
per year
EXAMPLE: LPXO2520-18-2.5-E-W-32M-1-CSW
PLEASE INDICATE YOUR REQUIRED PARAMETERS
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 5 OF 6 I SPEC 01 I REV.00 I JULY 2015
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
PREMIUM QUALITY BY
PETERMANN-TECHNIK
OUR COMPANY IS CERTIFIED ACCORDING TO ISO 9001:2008 IN OCTOBER 2013 BY THE DMSZ CERTIFIKATION GMBH.
THIS IS FOR YOU TO ENSURE THAT THE PRINCIPLES OF QUALITY
MANAGEMENT ARE FULLY IMPLEMENTED IN OUR QUALITY MANAGEMENT SYSTEM AND QUALITY CONTROL METHODS ALSO DOMINATE OUR QUALITY STANDARDS.
© PETERMANN-TECHNIK GmbH 2015. The information contained herein is subject to change at any time without notice. PETERMANN-TECHNIK owns
all rights, title and interest to the intellectual property related to PETERMANN-TECHNIK's products, including any software, firmware, copyright, patent, or trademark. The sale of PETERMANN-TECHNIK products does not convey or imply any license under patent or other rights. PETERMANNTECHNIK retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or
services by PETERMANN-TECHNIK. Unless otherwise agreed to in writing by PETERMANN-TECHNIK, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited.
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 6 OF 6 I SPEC 01 I REV.00 I JULY 2015