Datasheet - Petermann

PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
MINIATURE LOW COST SMD-TCXO
SERIES “TXO“
FEATURES
+
+
+
+
+
+
High reliability for low cost
Cheapest available SMD-TCXO
Available in 1.8, 2.6, 2.8, 3.0 and 3.3 VDC (1.7-3.5 VDC)
New standard for low cost SMD-TCXOs
Qualified for automotive applications
Extended temperature range to -40/+85°C available
PB FREE / ROHS-2 2011/65/EU COMPLIANT
GENERAL DATA
PARAMETERS
PRODUCT FEATURES AND CONDITIONS
SMD-OSCILLATOR SERIES
TXO
PACKAGE
FREQUENCY RANGE
TXO2016
2.0 x 1.6x 0.6 mm3
TXO2520
2.5 x 2.0x 0.8 mm3
TXO3225
3.2 x 2.5 x 0.9 mm3
TXO2016
13.0 ~ 52.0 MHz
TXO2520
9.6 ~ 52.0 MHz
TXO3225
9.6 ~ 52.0 MHz
OPERATING TEMPERATURE RANGE
-10/+60°C ~ -40/+85°C
STORAGE TEMPERATURE RANGE
-55/+125°C
STANDARD FREQUENCY
13 / 19.2 / 20 / 25 / 26 / 30 / 32 / 38.4 / 40 / 52 MHz
SUPPLY VOLTAGE (VDD)
+1.8V / +2.6V / +2.8V / +3.0V / +3.3V
+1.5 mA max. (f ≤ 26 MHz)
CURRENT CONSUMPTION
+2.0 mA max. (f > 26 MHz)
OUTPUT LEVEL
0.8 Vp-p min. (Clipped Sinewave / DC-coupled)
OUTPUT LOAD
10kΩ // 10pF
FREQUENCY
STABILITY
INITIAL TOLERANCE
± 1.5 ppm max. (after 2 reflows)
VS. TEMPERATURE
± 2.0 ppm max. / -30~+85°C
± 2.5 ppm max. / -40~+85°C
Other parameters are available on request
VS. SUPPLY VOLTAGE
± 0.2 ppm max. (VDD±5%)
VS. LOAD VARIATION
± 0.2 ppm max. (10kΩ // 10pF±10%)
VS. AGING
±1.0 ppm max. / year
Start–up Time
2.0 ms max.
Phase Noise
[f ≤ 15MHz] [15<f≤26MHz][26MHz<f≤40MHz]
Offset 100Hz
-115dBc/Hz -110dBc/Hz -105dBc/Hz
Offset 1kHz
-135dBc/Hz -130dBc/Hz -125dBc/Hz
Offste 10kHz
-145dBc/Hz -140dBc/Hz -135dBc/Hz
Offset 100kHz
-145dBc/Hz -145dBc/Hz -145dBc/Hz
DELIVERY FORM
Tape and Reel / 2.000 pcs. per reel, lower QTY possible
OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 1 OF 6 I SPEC 01 I REV.00 I JULY 2015
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
OUTLINE DRAWING OF TXO2016
OUTLINE DRAWING OF TXO2520
OUTLINE DRAWING OF TXO3225
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 2 OF 6 I SPEC 01 I REV.00 I JULY 2015
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
TEST CIRCUIT CLIPPED SINEWAVE (GROUND STANDARD VERSION)
TEST CIRCUIT CLIPPED SINEWAVE (OUTPUT ENABLE VERSION)
REEL SOLDER PROFILE
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 3 OF 6 I SPEC 01 I REV.00 I JULY 2015
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
REEL SPECIFICATION OF TXO2016
REEL SPECIFICATION OF TXO2520
REEL SPECIFICATION OF TXO3225
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 4 OF 6 I SPEC 01 I REV.00 I JULY 2015
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
ORDERING INFORMATION
SERIES
TXO2016
TXO2520
TXO3225
SUPPLY VOLTAGE
33/ 30/ 28/ 26/ 18
FREQUENCY
TEMPERATURE
RANGE
OUTPUT SIGNAL
32.000MHz
or ON REQUEST
W=-40°/+85°C
K=-30°/+85°C
M=-20°/+70°C
BLANK= 0°/+70°C
Clipped Sinewave
TXO2520-18-2.5-E-W-32M-1-CSW
TEMPERATURE
STABILITY
2.5 or ON REQUEST
STAND-BY FUNCTION
BLANK=Without E/D
Function
E=With E/D Function
AGING
1=±1.0 ppm max.
per year
EXAMPLE: TXO2520-18-2.5-E-W-32M-1-CSW
PLEASE INDICATE YOUR REQUIRED PARAMETERS
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 5 OF 6 I SPEC 01 I REV.00 I JULY 2015
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
PREMIUM QUALITY BY
PETERMANN-TECHNIK
OUR COMPANY IS CERTIFIED ACCORDING TO ISO 9001:2008 IN OCTOBER 2013 BY THE DMSZ CERTIFIKATION GMBH.
THIS IS FOR YOU TO ENSURE THAT THE PRINCIPLES OF QUALITY
MANAGEMENT ARE FULLY IMPLEMENTED IN OUR QUALITY MANAGEMENT SYSTEM AND QUALITY CONTROL METHODS ALSO DOMINATE OUR QUALITY STANDARDS.
© PETERMANN-TECHNIK GmbH 2015. The information contained herein is subject to change at any time without notice. PETERMANN-TECHNIK owns
all rights, title and interest to the intellectual property related to PETERMANN-TECHNIK's products, including any software, firmware, copyright, patent, or trademark. The sale of PETERMANN-TECHNIK products does not convey or imply any license under patent or other rights. PETERMANNTECHNIK retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or
services by PETERMANN-TECHNIK. Unless otherwise agreed to in writing by PETERMANN-TECHNIK, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited.
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 6 OF 6 I SPEC 01 I REV.00 I JULY 2015