US6X8 Transistors General purpose amplification (30V, 1A) US6X8 zDimensions (Unit : mm) zApplication Low frequency amplifier 0.2Max. zFeatures 1) Collector current is large. 2) Collector saturation voltage is low. VCE (sat) : max. 350mV at Ic= 500mA / IB= 25mA ROHM : TUMT6 zAbsolute maximum ratings (Ta=25°C) zEquivalent Circuit Symbol Limits Unit Collector-base voltage VCBO 30 V Collector-emitter voltage VCEO 30 V Emitter-base voltage VEBO 6 V IC 1 A ICP 2 Parameter Collector current PC (6) (5) Tr1 ∗1 ∗ W/TOTAL 2 W/TOTAL ∗3 (4) Tr2 A 0.4 Power dissipation Abbreviated symbol : X08 1.0 0.7 150 Tj Junction temperature Tstg −55 to +150 Range of storage temperature ∗1 Single pulse, PW=1ms Each Terminal Mounted on a Recommended ∗2 ∗3 Mounted on a 25mm×25mm× t 0.8mm ceramic substrate (1) (2) (3) W/ELEMENT ∗3 °C °C zElectrical characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit − − Conditions IC=10µA Collector-base breakdown voltage BVCBO 30 Collector-emitter breakdown voltage BVCEO 30 − − V IC=1mA Emitter-base breakdown voltage BVEBO 6 − − V IE=10µA ICBO − − 100 nA VCB=30V Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current gain Transition frequency Collector output capacitance V IEBO − − 100 nA VEB=6V VCE(sat) − 120 350 mV IC/IB=500mA/25mA hFE 270 − 680 − VCE/IC=2V/100mA fT − 320 − Cob − 7 − ∗ MHz VCE=2V, IE=−100mA, f=100MHz ∗ pF VCB=10V, IE=0A, f=1MHz ∗ Pulsed Rev.C 1/2 US6X8 Transistors zPackaging specifications Package Type TR Code Basic ordering unit (pieces) 3000 US6X8 Ta=25°C Ta=−40°C 100 VCE=2V Pulsed 10 0.001 0.01 0.1 1 COLLECTOR CURRENT : IC (A) TRANSITION FREQUENCY : fT (MHz) COLLECTOR CURRENT : IC (A) Ta=25°C Ta=100°C Ta=−40°C 0.01 0.001 0 0.5 1.0 1.5 Fig.4 Grounded emitter propagation characteristics EMITTER INPUT CAPACITANCE : Cib (pF) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) 1 Ta=100°C 0.1 VCE(sat) Ta=25°C Ta=−40°C 0.01 0.001 0.01 0.1 1 COLLECTOR CURRENT : IC (A) Ta=25°C VCE=2V 1 0.1 IC/IB=50/1 IC/IB=20/1 0.01 IC/IB=10/1 0.001 0.001 0.01 0.1 1 COLLECTOR CURRENT : IC (A) Fig.3 Collector-emitter saturation voltage vs. collector current 1000 tstg tdon 100 10 0.01 VCE=2V Ta=25°C f=100MHz 0.1 EMITTER CURRENT : IE (A) BASE TO EMITTER VOLTAGE : VBE (V) 100 VBE(sat) Ta=−40°C Ta=25°C Ta=100°C 10 1000 VCE=2V Pulsed 0.1 =20/1 IC/IB=20 Pulsed Fig.2 Collector-emitter saturation voltage base-emitter saturation voltage vs. collector current Fig.1 DC current gain vs. collector current 1 10 SWITCHING TIME : (ns) DC CURRENT GAIN : hFE Ta=100°C COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 1000 BASE SATURATION VOLTAGE : VBE (sat) (V) COLLECTOR SATURATION VOLTAGE : VCE (sat) (V) zElectrical characteristic curves Fig.5 Gain bandwidth product vs. emitter current 1 100 tf tr 10 Ta=25°C VCE=5V IC/IB=20/1 1 0.01 0.1 1 COLLECTOR CURRENT : IC (A) Fig.6 Switching time IC=0A f=1MHz Ta=25°C Cib Cob 10 1 0.01 0.1 1 10 100 EMITTER TO BASE VOLTAGE : VEB (V) COLLECTOR TO BASE VOLTAGE : VCB (V) Fig.7 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage Rev.C 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1