KPS HV, Large Case, SM Series, X7R Dielectric, 500

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric,
500 – 10,000 VDC (Industrial Grade)
Overview
KPS HV (KEMET Power Solutions, High Voltage), Large Case
(≥ 1515), SM Series capacitors in X7R dielectric are designed to
meet robust performance standards required in higher reliability
industrial applications. Utilizing lead-frame technology, SM Series devices isolate the multilayer ceramic chip component from
the printed circuit board providing advanced mechanical and
thermal stress performance. Isolation of the chip component
also addresses concerns for audible, microphonic noise that
may occur when a bias voltage is applied. Although this technology does not eliminate the potential for mechanical damage
that may propagate during extreme environmental and handling
conditions, it does demonstrate superior performance over
non-isolating systems. Available in both formed "L" and "J" lead
configurations, SM Series devices offer up to 10 mm of board
flex capability and exhibit lower ESR, ESL and higher current
discharge capability when compared to other dielectric solutions.
Combined with the stability of an X7R dielectric, KEMET’s High
Voltage SM Series devices exhibit a predictable change in
capacitance with respect to time and voltage and boast a minimal
change in capacitance with reference to ambient temperature.
Capacitance change is limited to ±15% from -55°C to +125°C.
KEMET's Industrial grade products offer additional screening
options for higher reliability applications. Both Group A and Group
B testing/inspection options per MIL–PRF–49467 are available for
the SM Series.
Benefits
•
•
•
•
•
•
-55°C to +125°C operating temperature range
Large Case Sizes (≥ 1515)
Formed “L” or “J” leadframe configurations
Group A and B screening per MIL–PRF–49467 available
Reliable and robust leadframe termination system
DC voltage ratings of 500 V, 1 KV, 2 KV, 3 KV, 4 KV, 5 KV,
7.5 KV, and 10 KV
• Capacitance offerings ranging from 150 pF up to 5.6 μF
Click image above for interactive 3D content
Ordering Information
SM20
SM21
SM22
SM23
SM24
SM25
SM26
1
2
Open PDF in Adobe Reader for full functionality
SM20
B
153
K
501
B
M
Style/Size
Dielectric
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Lead
Configuration1
Testing/
Inspection Option2
SM30
SM31
SM33
SM34
SM35
SM36
B = X7R
2 significant
digits + number
of zeros
K = ±10%
M = ±20%
501 = 500 V
A = Formed "L"
102 = 1,000 V B = Formed "J"
202 = 2,000 V
302 = 3,000 V
402 = 4,000 V
502 = 5,000 V
752 = 7,500 V
103 = 10,000 V
Blank = None
M = Group A per MIL–PRF–49467
Standard lead configuration is formed "J". If the appropriate character is excluded from the ordering code, the assumed lead configuration will be formed "J".
Group B testing/inspection option per MIL–PRF–49467 is available upon request. Please contact KEMET for ordering details.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
1
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
Dimensions – Inches (Millimeters)
FORMED LEAD (L)
FORMED LEAD (J)
Top View
Top View
Profile View
(L)
(L)
A W
LL
Profile View
(J)
T
.030 ±.010
(.76 ±.25)
L
Style/
Size
L
Length
W
Width
SM20
SM21
SM22
SM23
SM24
SM25
SM26
SM30
SM31
0.150 ± 0.015 (3.81 ± 0.38)
0.200 ± 0.020 (5.08 ± 0.51)
0.250 ± 0.020 (6.35 ± 0.51)
0.350 ± 0.030 (8.89 ± 0.76)
0.450 ± 0.030 (11.43 ± 0.76)
0.550 ± 0.030 (14.00 ± 0.76)
0.650 ± 0.030 (16.50 ± 0.76)
0.300 ± 0.030 (7.62 ± 0.76)
0.400 ± 0.030 (10.20 ± 0.76)
0.150 ± 0.015 (3.81 ± 0.38)
0.200 ± 0.020 (5.08 ± 0.51)
0.200 ± 0.020 (5.08 ± 0.51)
0.300 ± 0.030 (7.62 ± 0.76)
0.400 ± 0.030 (10.20 ± 0.76)
0.500 ± 0.030 (12.70 ± 0.76)
0.600 ± 0.030 (15.20 ± 0.76)
0.150 ± 0.015 (3.81 ± 0.38)
0.200 ± 0.020 (5.08 ± 0.51)
SM33
0.700 ± 0.030 (17.08 ± 0.76)
0.300 ± 0.030 (7.62 ± 0.76)
SM34
SM35
SM36
0.900 ± 0.030 (22.90 ± 0.76)
1.100 ± 0.030 (27.90 ± 0.76)
1.350 ± 0.030 (33.00 ± 0.76)
0.400 ± 0.030 (10.20 ± 0.76)
0.500 ± 0.030 (12.70 ± 0.76)
0.600 ± 0.030 (15.20 ± 0.76)
T
Thickness
Max.
(J)
A W
LL
0.220 (5.59)
.030 ±.010
(.76 ±.25)
L
A
Lead Width
Max.
LL
Lead Length
(Formed "L")
0.130 (3.30)
0.180 (4.57)
T
0.040 ± 0.010
(1.02 ± 0.25)
0.100 (2.54)
0.200 (5.08)
0.300 (7.62)
0.400 (10.20)
0.500 (12.70)
0.140 (3.55)
0.130 (3.30)
0.100 (2.54)
0.180 (4.57)
0.200 (5.08)
0.220 (5.59)
0.300 (7.62)
0.400 (10.2)
0.500 (12.7)
LL
Lead Length
(Formed "J")
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
Benefits cont'd
• Advanced protection against thermal and mechanical stress
• Provides up to 10 mm of board flex capability
• Reduces audible, microphonic noise
• Low ESR and ESL
• Non-polar device, minimizing installation concerns
• Silver plated copper alloy leadframe termination system
Applications
Typical applications include switch mode power supplies (input filters, resonators, tank circuits, snubber circuits, output filters), high
voltage coupling and DC blocking, voltage multiplier circuits, DC/DC converters and coupling capacitors in Ćuk converters, noise
reduction (piezoelectric/mechanical), circuits with a direct battery or power source connection, critical and safety relevant circuits
without (integrated) current limitation and any application that is subject to high levels of board flexure or temperature cycling. Markets
include power supply, LCD fluorescent backlight ballasts, HID lighting, telecom equipment, industrial and medical equipment/control
and Military.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
Qualification/Certification
Industrial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in
Table 3, Performance & Reliability.
Environmental Compliance
RoHS Compliant with Exemption(s)
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range
-55°C to +125°C
Capacitance Change with Reference to +25°C and 0 VDC Applied
(TCC)
±15%
Aging Rate (Maximum % Capacitance Loss/Decade Hour)
3.0%
Dielectric Withstanding Voltage (DWV)
Dissipation Factor (DF) Maximum Limit @ 25ºC
Insulation Resistance (IR) Limit @ 25°C
150% of rated voltage for voltage rating of ≤ 1,250 VDC
120% of rated voltage for voltage rating of > 1,250 VDC
(5 ±1 seconds and charge/discharge not exceeding 50 mA)
2.5%
1,000 megohm microfarads or 100 GΩ
(Rated voltage DC applied for 120 ±5 seconds @ 25°C for voltage rating of ≤ 500 VDC)
(500 VDC applied for 120 ±5 seconds @ 25°C for voltage rating of > 500 VDC)
Regarding aging rate: Capacitance measurements (including tolerance) are indexed to a referee time of 1,000 hours.
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and dissipation factor (DF) measured under the following conditions:
1 kHz ±50 Hz and 1.0 Vrms ±0.2 V if capacitance > 100 pF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Dielectric
Rated DC Voltage
Capacitance Value
Dissipation Factor
(Maximum %)
Capacitance
Shift
X7R
All
All
3.0
±20%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
3
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
Table 1A – Capacitance Range/Selection Waterfall SM20 – SM24 Style/Size
Style/Size
SM20
SM21
0.150 ± 0.015
(3.81 ± 0.38)
0.150 ± 0.015
(3.81 ± 0.38)
0.130
(3.30)
0.100
(2.54)
0.100 ± 0.020
(2.54 ± 0.51)
0.040 ± 0.010
(1.02 ± 0.25)
0.200 ± 0.020
(5.08 ± 0.51)
0.200 ± 0.020
(5.08 ± 0.51)
0.180
(4.57)
0.100
(2.54)
0.100 ± 0.020
(2.54 ± 0.51)
0.040 ± 0.010
(1.02 ± 0.25)
SM22
SM23
SM24
0.350 ± 0.030
(8.89 ± 0.76)
0.300 ± 0.030
(7.62 ± 0.76)
0.220
(5.59)
0.200
(5.08)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
0.450 ± 0.030
(11.43 ± 0.76)
0.400 ± 0.030
(10.20 ± 0.76)
0.220
(5.59)
0.300
(7.62)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
Dimensions – inches (mm)
Length
Width
Thickness
Maximum
Lead Width
Maximum
Lead Length
"L"
Lead Length
"J"
Voltage Code
Voltage DC
Capacitance
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1,000 pF
1,200 pF
1,500 pF
1,800 pF
2,200 pF
2,700 pF
3,300 pF
3,900 pF
4,700 pF
5,600 pF
6,800 pF
8,200 pF
0.01 µF
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
0.033 µF
0.039 µF
0.047 µF
0.056 µF
0.068 µF
0.082 µF
0.1 µF
0.12 µF
0.15 µF
0.18 µF
0.22 µF
0.27 µF
0.33 µF
0.39 µF
0.47 µF
0.56 µF
0.68 µF
0.82 µF
1.0 µF
1.2 µF
0.250 ± 0.020
(6.35 ± 0.51)
0.200 ± 0.020
(5.08 ± 0.51)
0.180
(4.57)
0.100
(2.54)
0.100 ± 0.020
(2.54 ± 0.51)
0.040 ± 0.010
(1.02 ± 0.25)
X7R Dielectric
501 102 202 501 102 202 302 501 102 202 302 501 102 202 302 402 501 102 202 302 402 502
500 1 K 2 K 500 1 K 2 K 3 K 500 1 K 2 K 3 K 500 1 K 2 K 3 K 4 K 500 1 K 2 K 3 K 4 K 5 K Capacitance
Tolerance
Capacitance Code
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
331
391
471
561
681
821
102
122
152
182
222
272
332
392
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
821
102
122
152
182
222
272
332
392
472
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
681
821
102
122
152
182
222
272
332
392
472
562
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
102
122
152
182
222
272
332
392
472
562
682
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
102
122
152
182
222
272
332
392
472
562
682
822
103
123
102
122
152
182
222
272
332
392
472
562
682
K, M
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
4
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
Table 1B – Capacitance Range/Selection Waterfall SM25 – SM31 Style/Size
Style/Size
SM25
SM26
SM30
SM31
0.300 ± 0.030
(7.62 ± 0.76)
0.150 ± 0.015
(3.81 ± 0.38)
0.140
(3.55)
0.100
(2.54)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
0.400 ± 0.030
(10.20 ± 0.76)
0.200 ± 0.020
(5.08 ± 0.51)
0.130
(3.30)
0.100
(2.54)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
Dimensions – inches (mm)
0.550 ± 0.030
(14.00 ± 0.76)
0.500 ± 0.030
(12.70 ± 0.76)
0.220
(5.59)
0.400
(10.20)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
Length
Width
Thickness
Maximum
Lead Width
Maximum
Lead Length
"L"
Lead Length
"J"
Voltage Code
Voltage DC
Capacitance
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1,000 pF
1,200 pF
1,500 pF
1,800 pF
2,200 pF
2,700 pF
3,300 pF
3,900 pF
4,700 pF
5,600 pF
6,800 pF
8,200 pF
0.01 µF
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
0.033 µF
0.039 µF
0.047 µF
0.056 µF
0.068 µF
0.082 µF
0.1 µF
0.12 µF
0.15 µF
0.18 µF
0.22 µF
0.27 µF
0.33 µF
0.39 µF
0.47 µF
0.56 µF
0.68 µF
0.82 µF
0.650 ± 0.030
(16.50 ± 0.76)
0.600 ± 0.030
(15.20 ± 0.76)
0.220
(5.59)
0.500
(12.70)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
X7R Dielectric
501 102 202 302 402 502 501 102 202 302 402 502 501 102 202 302 402 501 102 202 302 402 502
500 1 K 2 K 3 K 4 K 5 K 500 1 K 2 K 3 K 4 K 5 K 500 1 K 2 K 3 K 4 K 500 1 K 2 K 3 K 4 K 5 K Capacitance
Tolerance
Capacitance Code
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
222
272
332
392
472
562
682
822
103
123
153
222
272
332
392
472
562
682
822
103
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
392
472
562
682
822
103
123
153
183
223
273
333
392
472
562
682
822
103
123
153
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
151
181
221
271
331
391
471
561
681
821
102
122
152
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
681
821
102
122
152
182
222
272
332
392
472
562
682
822
681
821
102
122
152
182
222
272
332
392
681
821
102
122
152
K, M
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
5
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
Table 1B – Capacitance Range/Selection Waterfall SM25 – SM31 Style/Size cont'd
Style/Size
SM25
SM26
SM30
SM31
0.300 ± 0.030
(7.62 ± 0.76)
0.150 ± 0.015
(3.81 ± 0.38)
0.140
(3.55)
0.100
(2.54)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
0.400 ± 0.030
(10.20 ± 0.76)
0.200 ± 0.020
(5.08 ± 0.51)
0.130
(3.30)
0.100
(2.54)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
Dimensions – inches (mm)
0.550 ± 0.030
(14.00 ± 0.76)
0.500 ± 0.030
(12.70 ± 0.76)
0.220
(5.59)
0.400
(10.20)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
Length
Width
Thickness
Maximum
Lead Width
Maximum
Lead Length
"L"
Lead Length
"J"
Voltage Code
Voltage DC
Capacitance
1.0 µF
1.2 µF
1.5 µF
1.8 µF
2.2 µF
2.7 µF
2.9 µF
0.650 ± 0.030
(16.50 ± 0.76)
0.600 ± 0.030
(15.20 ± 0.76)
0.220
(5.59)
0.500
(12.70)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
X7R Dielectric
501 102 202 302 402 502 501 102 202 302 402 502 501 102 202 302 402 501 102 202 302 402 502
500 1 K 2 K 3 K 4 K 5 K 500 1 K 2 K 3 K 4 K 5 K 500 1 K 2 K 3 K 4 K 500 1 K 2 K 3 K 4 K 5 K Capacitance
Tolerance
Capacitance Code
105
125
155
185
105
125
155
185
225
275
295
105
K, M
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
6
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
Table 1C – Capacitance Range/Selection Waterfall SM33 – SM35 Style/Size
Style/Size
SM33
SM34
SM35
Dimensions – inches (mm)
0.700 ± 0.030
(17.08 ± 0.76)
0.300 ± 0.030
(7.62 ± 0.76)
0.180
(4.57)
0.200
(5.08)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
Length
Width
Thickness
Maximum
Lead Width
Maximum
Lead Length
"L"
Lead Length
"J"
Voltage Code
Voltage DC
Capacitance
820 pF
1,000 pF
1,200 pF
1,500 pF
1,800 pF
2,200 pF
2,700 pF
3,300 pF
3,900 pF
4,700 pF
5,600 pF
6,800 pF
8,200 pF
0.01 µF
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
0.033 µF
0.039 µF
0.047 µF
0.056 µF
0.068 µF
0.082 µF
0.1 µF
0.12 µF
0.15 µF
0.18 µF
0.22 µF
0.27 µF
0.33 µF
0.39 µF
0.47 µF
0.56 µF
0.68 µF
0.82 µF
1.0 µF
1.2 µF
1.5 µF
1.8 µF
2.2 µF
2.7 µF
2.9 µF
3.3 µF
3.9 µF
0.900 ± 0.030
(22.90 ± 0.76)
0.400 ± 0.030
(10.20 ± 0.76)
0.220
(5.59)
0.300
(7.62)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
1.100 ± 0.030
(27.90 ± 0.76)
0.500 ± 0.030
(12.70 ± 0.76)
0.220
(5.59)
0.400
(10.2)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
X7R Dielectric
501 102 202 302 402 502 752 501 102 202 302 402 502 752 103 501 102 202 302 402 502 752 103
500 1 K 2 K 3 K 4 K 5 K 7.5 K 500 1 K 2 K 3 K 4 K 5 K 7.5 K 10 K 500 1 K 2 K 3 K 4 K 5 K 7.5 K 10 K Capacitance
Tolerance
Capacitance Code
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
821
102
122
152
182
222
272
332
392
472
562
682
821
102
122
152
182
222
272
332
392
472
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
102
122
152
182
222
272
332
392
472
562
682
102
122
152
182
222
272
332
392
472
562
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
295
335
395
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
332
392
472
562
682
822
103
123
153
183
223
273
332
392
472
562
682
822
103
102
122
152
182
222
272
332
392
472
562
682
K, M
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
7
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
Table 1D – Capacitance Range/Selection Waterfall SM36 Style/Size
Style/Size
SM36
Dimensions – inches (mm)
1.350 ± 0.030
(33.00 ± 0.76)
0.600 ± 0.030
(15.20 ± 0.76)
0.220
(5.59)
0.500
(12.7)
0.100 ± 0.020
(2.54 ± 0.51)
0.100 ± 0.020
(2.54 ± 0.51)
Length
Width
Thickness
Maximum
Lead Width
Maximum
Lead Length
"L"
Lead Length
"J"
Voltage Code
Voltage DC
Capacitance
1,500 pF
1,800 pF
2,200 pF
2,700 pF
3,300 pF
3,900 pF
4,700 pF
5,600 pF
6,800 pF
8,200 pF
0.01 µF
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
0.033 µF
0.039 µF
0.047 µF
0.056 µF
0.068 µF
0.082 µF
0.1 µF
0.12 µF
0.15 µF
0.18 µF
0.22 µF
0.27 µF
0.33 µF
0.39 µF
0.47 µF
0.56 µF
0.68 µF
0.82 µF
1.0 µF
1.2 µF
1.5 µF
1.8 µF
2.2 µF
2.7 µF
2.9 µF
3.3 µF
3.9 µF
4.7 µF
5.6 µF
X7R Dielectric
501 102 202 302 402 502 752 103
500 1 K 2 K 3 K 4 K 5 K 7.5 K 10 K Capacitance
Tolerance
Capacitance Code
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
295
335
395
475
565
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
472
562
682
822
103
123
153
183
223
273
333
472
562
682
822
103
123
153
183
223
152
182
222
272
332
392
472
562
682
822
103
K, M, P, Z
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
8
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
Table 2 – Chip Thickness/Packaging Quantities
1
Series
Style/Size
SM
SM20
SM21
SM22
SM23
SM24
SM25
SM26
SM30
SM31
SM33
SM34
SM35
SM36
Tray Quantity Tray Quantity
Minimum1
Maximum1
50
1
25
10
Minimum order value applies. Contact KEMET for details.
Soldering Process
The capacitors and assemblies outlined in this specification
Recommended Reflow Soldering Profile:
sheet are susceptible to thermal shock damage due to their large
ceramic mass. Temperature profiles used should provide adequate
Profile Feature
SnPb Assembly
temperature rise and cool-down time to prevent damage from
Preheat/Soak
thermal shock. In general, KEMET recommends against hand
Temperature Minimum (TSmin)
100°C
Temperature Maximum (TSmax)
150°C
soldering for these types of large ceramic devices.
Recommended Soldering Technique:
• Solder reflow only
Time (ts) from Tsmin to Tsmax)
60 – 90 seconds
Ramp-up Rate (TL to TP)
2°C/seconds
Liquidous Temperature (TL)
183°C
Time Above Liquidous (tL)
95 seconds
Peak Temperature (TP)
240°C
Preheating and Reflow Profile Notes:
Time within 5°C of Maximum Peak
5 seconds
Due to differences in the coefficient of thermal expansion for
Temperature (tP)
the different materials of construction, it is critical to monitor and
2°C/seconds
Ramp-down Rate (TP to TL)
control the heating and cooling rates during the soldering process.
Time 25°C to Peak Temperature
3.5 minutes
During the reflow soldering process, the maximum recommended
heating and cooling rate (dT/dt) is 4°C/second. To ensure optimal Note 1: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
component reliability, KEMET's recommended heating and cooling
rate is 2°C/second. After soldering, the capacitors should be air
T
t
Maximum Ramp Up Rate = 3ºC/seconds
cooled to room temperature before further processing. Forced air
Maximum Ramp Down Rate = 6ºC/seconds
T
t
cooling is not recommended.
P
P
Temperature
L
L
Tsmax
Tsmin
25
tS
25ºC to Peak
Time
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
9
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
Table 3 – Performance & Reliability: Test Methods and Conditions
Stress
Reference
Board Flex
JIS–C–6429
Test or Inspection Method
Appendix 2, Note: 2 mm (minimum) for all except 3 mm for C0G.
Magnification 50 X. Conditions:
a) Method B, 4 hours @ 155°C, dry heat @ 235°C
Solderability
J–STD–002
b) Method B @ 215°C category 3
c) Method D, category 3 @ 260°C
1,000 cycles (-55°C to +125°C). Measurement at 24 hours +/- 2 hours after test conclusion.
Biased Humidity
MIL–STD–202 Method 103
Load Humidity: 1,000 hours 85°C/85% RH and 300 VDC Maximum Add 100 K ohm resistor.
Measurement at 24 hours +/- 2 hours after test conclusion.
Low Volt Humidity: 1,000 hours 85°C/85% RH and 1.5 V. Add 100 K ohm resistor. Measurement at
24 hours +/- 2 hours after test conclusion.
t = 24 hours/cycle. Steps 7a and 7b not required. Unpowered. Measurement at 24 hours +/- 2 hours
after test conclusion.
-55°C/+125°C. Note: Number of cycles required – 300. Maximum transfer time – 20 seconds. D14
dwell time – 15 minutes. Air – Air.
Thermal Shock
MIL–STD–202 Method 107
High Temperature Life
MIL–STD–202 Method 108
/EIA -198
Storage Life
MIL–STD–202 Method 108
150°C, 0 VDC, for 1,000 hours.
Vibration
MIL–STD–202 Method 204
Resistance to Soldering
Heat
5 g for 20 minutes, 12 cycles each of 3 orientations. Note: Use 8 "X5" PCB 0.031" thick 7 secure
points on one long side and 2 secure points at corners of opposite sides. Parts mounted within 2"
from any secure point. Test from 10–2,000 Hz.
MIL–STD–202 Method 210
Condition B. No preheat of samples. Note: single wave solder – procedure 2.
Terminal Strength
MIL–STD–202 Method 211
Conditions A (2.3 kg or 5 lbs).
Mechanical Shock
MIL–STD–202 Method 213
Figure 1 of Method 213, Condition F.
Resistance to Solvents
MIL–STD–202 Method 215
Add aqueous wash chemical, OKEM Clean or equivalent.
1,000 hours at 125°C (85°C for X5R, Z5U and Y5V) with rated voltage applied.
Storage and Handling
Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 70%
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulfur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within 1.5 years of
receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
10
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
Construction
Detailed Cross Section
Dielectric Material
(BaTiO3)
Leadframe
(Phosphor Bronze - Alloy 510,
Ag plated / Ni underplate)
Termination System
(Solderable Ag)
Dielectric Material
(BaTiO3)
Leadframe Attach
(Ag Epoxy)
Inner Electrodes
(PdAg)
Leadframe Attach
(Ag Epoxy)
Termination System
(Solderable Ag)
Leadframe
(Phosphor Bronze - Alloy 510,
Ag plated / Ni underplate)
Inner Electrodes
(PdAg)
Product Marking
Product marking is an extra-cost option. These devises will be supplied unmarked unless otherwise specified and/or requested. For
more detailed information regarding marked product and how to request this option, please contact KEMET.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
11
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Sasso Marconi, Italy
Tel: 39-051-939111
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
2835 KEMET Way
Simpsonville, SC 29681
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Espoo, Finland
Tel: 358-9-5406-5000
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Central
Novi, MI
Tel: 248-306-9353
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
12
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
KPS HV, Large Case, SM Series, X7R Dielectric, 500 – 10,000 VDC (Industrial Grade)
Disclaimer
Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1033_X7R_KPS_HIVOLT_SMD • 12/15/2014
13