GR900CE

CERAMIC HIGH RELIABILITY
GENERAL INFORMATION GR900 SERIES
HIGH RELIABILITY — GR900 / Q-SPEC
GR900 capacitors are intended for use in any application where the
chance of failure must be reduced to the lowest possible level. While
any well-made multilayer ceramic capacitor is an inherently reliable
device, GR900 capacitors receive special attention in all phases of
manufacture including:
•
Raw Materials Selection
•
Clean Room Production
•
Individual Batch Testing
•
C-SAM (when applicable)
•
Singular Batch Identity is Maintained
•
Destructive Physical Analysis
•
These parts are well worth the added investment in comparison to the
cost of a device or system failure.
Typical applications include: Medical, Aerospace, Communication
Satellites, Radar and Guidance Systems.
4. Insulation Resistance: The 25°C measurement with rated
voltage applied shall be the lesser of 100 GΩ or 1000 Megohm Microfarads (100% of lot).
*5. Insulation Resistance: The 125°C measurement with rated
voltage applied shall be the lesser of 10 GΩ or 100 Megohm Microfarads (100% of lot). For chips, 125°C IR is performed prior to
Step 3 above.
6. Storage at 150°C for 2 hours minimum without voltage applied
followed by a 12-hour minimum stabilization period (temperature
characteristic BX only).
7. Capacitance: Shall be within specified tolerance at 25°C (100%
of lot). (Aging phenomenon is taken into account for BX dielectric
to obtain capacitance.)
8. Dissipation Factor: Shall not exceed 2.5% for X7R (BX)
dielectric, 0.15% for C0G (BP) dielectric at 25°C. (100% of lot.)
SCREENING AND SAMPLE TESTS
Each batch receives the following testing/inspections:
In Process Inspection (Per MIL-PRF-123):
1.
100% Visual Inspection.
2.
Destructive Physical Analysis: (DPA) - A sample is pulled from
each lot and examined per EIA-469 and KEMET’s strict internal
void and delamination criteria. Sampling plan is per MIL-PRF-123.
3.
C-SAM (GR900 / “A” in the fifth character position of the ordering
code): May be performed on batches failing to meet the DPA
criteria for removal of marginal product. Not required on each lot.
C-SAM (Q-SPEC / “Q” in the fifth character position of the ordering
code): Receive 100% C-SAM of lot prior to application of end
metallization.
Group A
1. Thermal Shock: Materials used in the construction of multilayer
ceramic capacitors possess various thermal coefficients of expansion.
To assure maximum uniformity, each part is temperature cycled in
accordance to MIL-STD-202, Method 107, Condition A with Step 3
being 125°C. Number of cycles shall be 20 (100% of lot).
2. Voltage Conditioning: One of the most strenuous environments for
any capacitor is the high temperature/high voltage test. All units are
subject to twice-rated voltage to the units at the maximum rated
temperature of 125°C for a minimum of 168 hours and a maximum of
264 hours. The voltage conditioning may be terminated at any time
during 168 hours to 264 hours time interval that confirmed failures meet
the requirements of the PDA during the last 48 hours of 1 unit or .4%
(100% of lot).
Optional Voltage Conditioning (Accelerated Voltage
Conditioning): All conditions of the standard voltage conditioning
apply with the exception of increased voltage and decreased test time.
Refer to MIL-PRF-123 for the proper formula.
*Step 5 is performed on chips at this point (100% of lot).
3. Dielectric Withstanding Voltage: 250% of the DC rated voltage at
25°C (100% of lot).
12
9. Percent Defective Allowable (PDA): The overall PDA is 8% for
parts outside the MIL-PRF-123 values. The PDA is per MIL-PRF123 for all parts that are valid MIL-PRF-123 values. The PD
includes steps 1 through 8 above with the following exceptions.
Capacitance exclusion - capacitance values no more than 5% or
.5pF, whichever is greater for BX characteristic or 1% or .3pF,
whichever is greater for BP characteristic beyond specified
tolerance limit, shall be removed from the lot but shall not be
considered defective for determination of the PD.
Insulation Resistance at 25°C — Product which is not acceptable
for twice the military limit but is acceptable per the military limit, is
removed from the lot but shall not be considered defective for
determination of the PD.
10. Visual and Mechanical Examination: Performed per MILPRF-123 criteria.
11. Radiographic Examination (Leaded Devices Only): Radial
devices receive a one-plane X-ray.
12. Destructive Physical Analysis (DPA): A sample is examined
on each lot per EIA-469. Sampling Plan is per MIL-PRF-123.
STANDARD PACKAGING
All products are packaged in trays except C512 capacitors which
are packaged 1 piece per bag.
*Note: All packaging is ESD protected.
DATA PACKAGE
A data package is sent with each shipment which contains:
1. Final Destructive Physical Analysis (DPA) report.
2. Certificate of Compliance stating that the parts meet all
applicable requirements of the appropriate military specification to
the best failure level to which KEMET is approved.
3. Summary of Group A Testing.
Group B
MIL-PRF-123 Group B testing is available with special order.
Please contact KEMET for additional information and ordering
details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
CAPACITOR OUTLINE DRAWINGS
*Add .38mm (.015”) to the positive width and thickness tolerance dimensions and 0.64mm (.025”) to the positive length tolerance dimension for solder coated(dipped) end metallization. DIMENSIONS — MILLIMETERS (INCHES)
Size
Code
0504
0805
1005
1206
1210
1805
1808
1812
1825
2225
L
W
Length
Width
1.269 (.050) ± 0.254 (.010) 1.015 (.040) ± 0.254 (.010)
2.03 (.080) ± 0.38 (.015) 1.27 (.050) ± 0.38 (.015)
2.56 (.100) ± 0.38 (.015) 1.27 (.050) ± 0.38 (.015)
3.07 (.120) ± 0.38 (.015) 1.52 (.060) ± 0.38 (.015)
3.07 (.120) ± 0.38 (.015) 2.56 (.100) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 1.27 (.050) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 2.03 (.080) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 3.18 (.125) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 6.35 (.250) ± 0.38 (.015)
5.59 (.220) ± 0.38 (.015) 6.35 (.250) ± 0.38 (.015)
T
Thickness
Max.
1.142 (.045)
1.4 (.055)
1.5 (.059)
1.6 (.065)
1.6 (.065)
1.4 (.055)
1.6 (.065)
2.03 (.080)
2.03 (.080)
2.03 (.080)
ORDERING INFORMATION
C 0805 A 103 K 5 X A C
CERAMIC
SIZE CODE
See table above
SPECIFICATION
END METALLIZATION
C—100% Tin(Sn) Plated
H—60/40 SnPb Coated (Dipped)
L—70/30 SnPb Plated
G—Gold Plated
A — KEMET GR900 (CHIPS); Q — KEMET Q-SPEC
CAPACITANCE CODE
Expressed in Picofarads (pF)
First two digit-significant figures.
Third digit-number of zeros. (Use 9 for 1.0 thru 9.9 pF.
Example: 2.2 pF — 229).
FAILURE RATE LEVEL
(%/1,000 HOURS)
A—Standard—Not applicable
CAPACITANCE TOLERANCE
M — ±20%
K — ±10%
J — ±5%
G — ±2% (G(BP) Temperature Characteristic Only)
F — ±1% (G(BP) Temperature Characteristic Only)
*D — ±0.5 pF (G(BP) Temperature Characteristic Only)
*C — ±0.25 pF (G(BP) Temperature Characteristic Only)
*These tolera nces available only for 1.0 through 10 pF capacitors. Designated by Capacitance Change over
Temperature Range
G—BP (±30 PPM/°C)
X—BX (±15%, -55 +125°C)( +15%, -25% @ rated Vdc)
*BX dielectric is a suitable substitute for BR (X7R) dielectric* BR Dielectric (±15%, ‐55 +125°C / +15%, ‐40% @ rated Vdc) MARKING
Capacitors shall be legibly laser marked in contrasting color with the KEMET trademark and 2-digit capacitance symbol.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
17
VOLTAGE
1—100V
2—200V
5—50V
TEMPERATURE CHARACTERISTIC
3—25V
4—16V
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C1005
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
1.0
1.1
1.2
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
75.0
82.0
91.0
100
110
120
130
150
160
C1005A109(1)2GA(2)
C1005A119(1)2GA(2)
C1005A129(1)2GA(2)
C1005A159(1)2GA(2)
C1005A169(1)2GA(2)
C1005A189(1)2GA(2)
C1005A209(1)2GA(2)
C1005A229(1)2GA(2)
C1005A249(1)2GA(2)
C1005A279(1)2GA(2)
C1005A309(1)2GA(2)
C1005A339(1)2GA(2)
C1005A369(1)2GA(2)
C1005A399(1)2GA(2)
C1005A439(1)2GA(2)
C1005A479(1)2GA(2)
C1005A519(1)2GA(2)
C1005A569(1)2GA(2)
C1005A689(1)2GA(2)
C1005A759(1)2GA(2)
C1005A829(1)2GA(2)
C1005A919(1)2GA(2)
C1005A100(1)2GA(2)
C1005A110(1)2GA(2)
C1005A120(1)2GA(2)
C1005A130(1)2GA(2)
C1005A150(1)2GA(2)
C1005A160(1)2GA(2)
C1005A180(1)2GA(2)
C1005A200(1)2GA(2)
C1005A220(1)2GA(2)
C1005A240(1)2GA(2)
C1005A270(1)2GA(2)
C1005A300(1)2GA(2)
C1005A330(1)2GA(2)
C1005A360(1)2GA(2)
C1005A390(1)2GA(2)
C1005A430(1)2GA(2)
C1005A470(1)2GA(2)
C1005A510(1)2GA(2)
C1005A560(1)2GA(2)
C1005A620(1)2GA(2)
C1005A750(1)2GA(2)
C1005A820(1)2GA(2)
C1005A910(1)2GA(2)
C1005A101(1)2GA(2)
C1005A111(1)2GA(2)
C1005A121(1)2GA(2)
C1005A131(1)2GA(2)
C1005A151(1)2GA(2)
C1005A161(1)2GA(2)
KEMET
PART NUMBER
200 VOLT - BP
180
200
220
240
270
300
330
360
390
430
470
C1005A181(1)2GA(2)
C1005A201(1)2GA(2)
C1005A221(1)2GA(2)
C1005A241(1)2GA(2)
C1005A271(1)2GA(2)
C1005A301(1)2GA(2)
C1005A331(1)2GA(2)
C1005A361(1)2GA(2)
C1005A391(1)2GA(2)
C1005A431(1)2GA(2)
C1005A471(1)2GA(2)
100 VOLT - BP
510
560
620
680
750
820
C1005A511(1)1GA(2)
C1005A561(1)1GA(2)
C1005A621(1)1GA(2)
C1005A681(1)1GA(2)
C1005A751(1)1GA(2)
C1005A821(1)1GA(2)
50 VOLT - BP
910
1000
1100
1200
C1005A911(1)5GA(2)
C1005A102(1)5GA(2)
C1005A112(1)5GA(2)
C1005A122(1)5GA(2)
200 VOLT - BX
330
390
470
560
680
820
1000
1200
1500
1800
C1005A331(1)2XA(2)
C1005A391(1)2XA(2)
C1005A471(1)2XA(2)
C1005A561(1)2XA(2)
C1005A681(1)2XA(2)
C1005A821(1)2XA(2)
C1005A102(1)2XA(2)
C1005A122(1)2XA(2)
C1005A152(1)2XA(2)
C1005A182(1)2XA(2)
100 VOLT - BX
2200
2700
3300
3900
4700
5600
6800
8200
10,000
C1005A222(1)1XA(2)
C1005A272(1)1XA(2)
C1005A332(1)1XA(2)
C1005A392(1)1XA(2)
C1005A472(1)1XA(2)
C1005A562(1)1XA(2)
C1005A682(1)1XA(2)
C1005A822(1)1XA(2)
C1005A103(1)1XA(2)
50 VOLT - BX
12,000
15,000
18,000
22,000
C1005A123(1)5XA(2)
C1005A153(1)5XA(2)
C1005A183(1)5XA(2)
C1005A223(1)5XA(2)
RATINGS AND PART NUMBER REFERENCE
STYLE C1206
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
C1206A100(1)2GA(2)
C1206A110(1)2GA(2)
C1206A120(1)2GA(2)
C1206A130(1)2GA(2)
C1206A150(1)2GA(2)
C1206A160(1)2GA(2)
C1206A180(1)2GA(2)
C1206A200(1)2GA(2)
C1206A220(1)2GA(2)
C1206A240(1)2GA(2)
KEMET
PART NUMBER
200 VOLT - BP
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
C1206A270(1)2GA(2)
C1206A300(1)2GA(2)
C1206A330(1)2GA(2)
C1206A360(1)2GA(2)
C1206A390(1)2GA(2)
C1206A430(1)2GA(2)
C1206A470(1)2GA(2)
C1206A510(1)2GA(2)
C1206A560(1)2GA(2)
C1206A620(1)2GA(2)
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on page 17.
BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0 thru 10pF only) TEMPERATURE CHARACTERISTIC “G”
BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X”
(2) Complete part number by inserting end Metallization, as applicable as shown in ordering information on page 17.
C—Tin-Coated, Final (SolderGuard II) H—Solder-Coated, Final (SolderGuard I) L—70/30 Tin Lead Plated G—Gold Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
19
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C1808
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
C1808A331(1)2GA(2)
C1808A361(1)2GA(2)
C1808A391(1)2GA(2)
C1808A431(1)2GA(2)
C1808A471(1)2GA(2)
C1808A511(1)2GA(2)
C1808A561(1)2GA(2)
C1808A621(1)2GA(2)
C1808A681(1)2GA(2)
C1808A751(1)2GA(2)
C1808A821(1)2GA(2)
C1808A911(1)2GA(2)
C1808A102(1)2GA(2)
C1808A112(1)2GA(2)
C1808A122(1)2GA(2)
C1808A132(1)2GA(2)
C1808A152(1)2GA(2)
100 VOLT - BP
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
C1808A162(1)1GA(2)
C1808A182(1)1GA(2)
C1808A202(1)1GA(2)
C1808A222(1)1GA(2)
C1808A242(1)1GA(2)
C1808A272(1)1GA(2)
C1808A302(1)1GA(2)
C1808A332(1)1GA(2)
C1808A362(1)1GA(2)
C1808A392(1)1GA(2)
C1808A432(1)1GA(2)
C1808A472(1)1GA(2)
KEMET
PART NUMBER
50 VOLT - BP
5100
5600
C1808A512(1)5GA(2)
C1808A562(1)5GA(2)
200 VOLT - BX
2200
2700
3300
3900
4700
5600
6800
8200
10,000
C1808A222(1)2XA(2)
C1808A272(1)2XA(2)
C1808A332(1)2XA(2)
C1808A392(1)2XA(2)
C1808A472(1)2XA(2)
C1808A562(1)2XA(2)
C1808A682(1)2XA(2)
C1808A822(1)2XA(2)
C1808A103(1)2XA(2)
100 VOLT - BX
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
C1808A123(1)1XA(2)
C1808A153(1)1XA(2)
C1808A183(1)1XA(2)
C1808A223(1)1XA(2)
C1808A273(1)1XA(2)
C1808A333(1)1XA(2)
C1808A393(1)1XA(2)
C1808A473(1)1XA(2)
50 VOLT - BX
39,000
47,000
56,000
68,000
82,000
100,000
C1808A393(1)5XA(2)
C1808A473(1)5XA(2)
C1808A563(1)5XA(2)
C1808A683(1)5XA(2)
C1808A823(1)5XA(2)
C1808A104(1)5XA(2)
RATINGS AND PART NUMBER REFERENCE
STYLE C1812
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
C1812A331(1)2GA(2)
C1812A361(1)2GA(2)
C1812A391(1)2GA(2)
C1812A431(1)2GA(2)
C1812A471(1)2GA(2)
C1812A511(1)2GA(2)
C1812A561(1)2GA(2)
C1812A621(1)2GA(2)
C1812A681(1)2GA(2)
C1812A751(1)2GA(2)
C1812A821(1)2GA(2)
C1812A911(1)2GA(2)
C1812A102(1)2GA(2)
C1812A112(1)2GA(2)
C1812A122(1)2GA(2)
C1812A132(1)2GA(2)
C1812A152(1)2GA(2)
C1812A162(1)2GA(2)
C1812A182(1)2GA(2)
C1812A202(1)2GA(2)
C1812A222(1)2GA(2)
C1812A242(1)2GA(2)
C1812A272(1)2GA(2)
100 VOLT - BP
3000
3300
3600
3900
4300
4700
5100
22
C1812A302(1)1GA(2)
C1812A332(1)1GA(2)
C1812A362(1)1GA(2)
C1812A392(1)1GA(2)
C1812A432(1)1GA(2)
C1812A472(1)1GA(2)
C1812A512(1)1GA(2)
KEMET
PART NUMBER
100 VOLT - BP
5600
6200
6800
C1812A562(1)1GA(2)
C1812A622(1)1GA(2)
C1812A682(1)1GA(2)
50 VOLT - BP
7500
8200
9100
10,000
C1812A752(1)5GA(2)
C1812A822(1)5GA(2)
C1812A912(1)5GA(2)
C1812A103(1)5GA(2)
200 VOLT - BX
6800
8200
10,000
12,000
15,000
18,000
C1812A682(1)2XA(2)
C1812A822(1)2XA(2)
C1812A103(1)2XA(2)
C1812A123(1)2XA(2)
C1812A153(1)2XA(2)
C1812A183(1)2XA(2)
100 VOLT - BX
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
C1812A223(1)1XA(2)
C1812A273(1)1XA(2)
C1812A333(1)1XA(2)
C1812A393(1)1XA(2)
C1812A473(1)1XA(2)
C1812A563(1)1XA(2)
C1812A683(1)1XA(2)
C1812A823(1)1XA(2)
50 VOLT - BX
82,000
100,000
120,000
150,000
180,000
C1812A823(1)5XA(2)
C1812A104(1)5XA(2)
C1812A124(1)5XA(2)
C1812A154(1)5XA(2)
C1812A184(1)5XA(2)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C1825
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
2700
3000
3300
3600
3900
4300
4700
5100
5600
C1825A272(1)2GA(2)
C1825A302(1)2GA(2)
C1825A332(1)2GA(2)
C1825A362(1)2GA(2)
C1825A392(1)2GA(2)
C1825A432(1)2GA(2)
C1825A472(1)2GA(2)
C1825A512(1)2GA(2)
C1825A562(1)2GA(2)
100 VOLT - BP
6200
6800
7500
8200
9100
10,000
11,000
12,000
13,000
15,000
16,000
18,000
C1825A622(1)1GA(2)
C1825A682(1)1GA(2)
C1825A752(1)1GA(2)
C1825A822(1)1GA(2)
C1825A912(1)1GA(2)
C1825A103(1)1GA(2)
C1825A113(1)1GA(2)
C1825A123(1)1GA(2)
C1825A133(1)1GA(2)
C1825A153(1)1GA(2)
C1825A163(1)1GA(2)
C1825A183(1)1GA(2)
50 VOLT - BP
20,000
22,000
KEMET
PART NUMBER
200 VOLT - BX
10,000
12,000
15,000
18,000
22,000
33,000
39,000
47,000
C1825A103(1)2XA(2)
C1825A123(1)2XA(2)
C1825A153(1)2XA(2)
C1825A183(1)2XA(2)
C1825A223(1)2XA(2)
C1825A333(1)2XA(2)
C1825A393(1)2XA(2)
C1825A473(1)2XA(2)
100 VOLT - BX
56,000
68,000
82,000
100,000
120,000
150,000
180,000
C1825A563(1)1XA(2)
C1825A683(1)1XA(2)
C1825A823(1)1XA(2)
C1825A104(1)1XA(2)
C1825A124(1)1XA(2)
C1825A154(1)1XA(2)
C1825A184(1)1XA(2)
50 VOLT - BX
180,000
220,000
270,000
330,000
390,000
470,000
C1825A184(1)5XA(2)
C1825A224(1)5XA(2)
C1825A274(1)5XA(2)
C1825A334(1)5XA(2)
C1825A394(1)5XA(2)
C1825A474(1)5XA(2)
C1825A203(1)5GA(2)
C1825A223(1)5GA(2)
RATINGS AND PART NUMBER REFERENCE
STYLE C2225
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
2700
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
C2225A272(1)2GA(2)
C2225A302(1)2GA(2)
C2225A332(1)2GA(2)
C2225A362(1)2GA(2)
C2225A392(1)2GA(2)
C2225A432(1)2GA(2)
C2225A472(1)2GA(2)
C2225A512(1)2GA(2)
C2225A562(1)2GA(2)
C2225A622(1)2GA(2)
C2225A682(1)2GA(2)
C2225A752(1)2GA(2)
C2225A822(1)2GA(2)
100 VOLT - BP
9100
10,000
11,000
12,000
13,000
15,000
16,000
18,000
20,000
22,000
C2225A912(1)1GA(2)
C2225A103(1)1GA(2)
C2225A113(1)1GA(2)
C2225A123(1)1GA(2)
C2225A133(1)1GA(2)
C2225A153(1)1GA(2)
C2225A163(1)1GA(2)
C2225A183(1)1GA(2)
C2225A203(1)1GA(2)
C2225A223(1)1GA(2)
50 VOLT - BP
24,000
27,000
33,000
KEMET
PART NUMBER
200 VOLT - BX
18,000
22,000
27,000
33,000
39,000
47,000
C2225A183(1)2XA(2)
C2225A223(1)2XA(2)
C2225A273(1)2XA(2)
C2225A333(1)2XA(2)
C2225A393(1)2XA(2)
C2225A473(1)2XA(2)
100 VOLT - BX
56,000
68,000
82,000
100,000
120,000
150,000
180,000
C2225A563(1)1XA(2)
C2225A683(1)1XA(2)
C2225A823(1)1XA(2)
C2225A104(1)1XA(2)
C2225A124(1)1XA(2)
C2225A154(1)1XA(2)
C2225A184(1)1XA(2)
50 VOLT - BX
220,000
270,000
330,000
390,000
470,000
560,000
680,000
820,000
1,000,000
C2225A224(1)5XA(2)
C2225A274(1)5XA(2)
C2225A334(1)5XA(2)
C2225A394(1)5XA(2)
C2225A474(1)5XA(2)
C2225A564(1)5XA(2)
C2225A684(1)5XA(2)
C2225A824(1)5XA(2)
C2225A105(1)5XA(2)
C2225A243(1)5GA(2)
C2225A273(1)5GA(2)
C2225A333(1)5GA(2)
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on
page 17. BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0
thru 10pF only) TEMPERATURE CHARACTERISTIC “G” BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X”
(2) Complete part number by inserting end Metallization, as applicable as shown in ordering information on page 17.
C—Tin-Coated, Final (SolderGuard II)
H—Solder-Coated, Final (SolderGuard I)
L—70/30 Tin/Lead Plated
G—Gold Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
23