Untitled

CERAMIC HIGH RELIABILITY CAPACITORS
CERAMIC HIGH RELIABILITY PRODUCTS
Ceramic Chips, Radial Molded
KEMET Electronics Corporation has been known for
many years as the leader in the ceramic high reliability products. KEMET produces high reliability
monolithic ceramic capacitors under tightly-controlled manufacturing procedures. These capacitors
achieve “State of the Art” performance by virtue of
careful materials selection, conservative design
rules, motivational training of employees, and
scrupulous inspection of all processes as well as the
finished product. KEMET not only manufactures its
own high reliability ceramic capacitor (GR900),
KEMET also manufactures MIL-PRF-123 product
which is built to the highest military standard in the
industry today.
BASIC REQUIREMENTS FOR KEMET’S
HIGH RELIABILITY
PRODUCTS ARE AS FOLLOWS:
1. Selected Raw Materials: All raw materials are
selected for characteristics known to produce the
finest quality capacitors exhibiting the best electrical
parameters and physical integrity. Materials traceability is maintained throughout the manufacturing
process.
2. Batch Homogeneity: Production is under batch
control. Each batch is homogeneous with respect to
materials, design and processing conditions.
3. Clean Room Processing: All processes sensitive
to particulate contamination take place in a clean
room environment.
4. Special Designs: Special design considerations
such as dielectric thickness are strictly enforced.
Only C0G (BP) and X7R (BX) temperature characteristics are made.
5. Destructive Physical Analysis (DPA, or
Cross-Sectioning): All batches are sampled using
EIA-469 as a minimum requirement. The samples
remain on file and DPA Reports are shipped with the
capacitors.
6. C-SAM (C-Mode Surface Acoustical
Microscopy): Optional 100% screening may be performed using ultrasonic energy to detect voids or
delaminations. Screened lots must pass a final sample
DPA.
7. Batch Performance Monitoring: All production
batches are tested to generate electrical characteristics. Batches which show anomalous characteristics
are rejected.
8. Special Customer Requirements: Many special
2
requirements such as serialization, DPA samples,
X-Ray plates, and special packaging can be accommodated.
9. Document Applicable: The high reliability product is implemented through various internal documents under revision control. The Manufacturing
Instructions provide detailed descriptions of all operations and delineate requirements for process control and product performance at various points in the
process flow. Inspector Operating Documents
describe test procedures and sampling plans for
inspection of raw materials, in-process material and
finished product. Raw material specifications
describe physical and chemical characteristics as
well as the packaging and labeling needed to preserve characteristics and identity. Customer specifications are internal documents applicable only to
products manufactured and inspected to requirements of individual customers; in effect, these documents translate customer drawings into modifications of the specified portions of KEMET standard
procedures.
The Quality System in total is controlled by the
KEMET Quality Manual and by various Quality
Operating Documents. All documents, and revisions
thereto, bear specified approval signatures.
DETAILED SPECIFICATION:
Temperature Characteristics
Electrical stability with respect to temperature and
voltage is related inversely to the packaging efficiency (capacitance X voltage in a given case size).
C0G (BP) is made from ceramic materials which are
not ferroelectric, yielding superior stability but low
packaging efficiency. X7R (BX) is made from materials which are ferroelectric, such as barium titanate,
yielding a stable and high packaging efficiency.
Aging
If the temperature of a barium titanate dielectric is
lowered after an excursion above its curie point, the
ceramic crystalline structure gradually reverts to the
tetragonal form typical of the low temperature conditions. The reversion requires a considerable length
of time, and its effect in practical capacitors has
become known as “Aging”. The rate of aging is
affected by both the temperature and the applied
voltage experienced by the capacitor. The COG (BP)
formulation is non-ferroelectric and does not exhibit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC HIGH RELIABILITY CAPACITORS
aging. The X7R (BX) formulation exhibits its own
characteristic aging rate which describes a decrease
in capacitance versus time. The capacitance of the
X7R dielectric decreases approximately 1.0% during each decade of hours following a return to temperatures below the curie point. In other words,
capacitance will decrease 1.0% between 1 and 10
hours, another 1.0% between 10 and 100 hours,
another 1.0% between 100 and 1000 hours, etc.
KEMET takes into consideration the aging rate by
designing capacitors to fall within the specified
capacitance tolerance at 1000 hours. Inasmuch as
the aging rate is exponential, very little change in
capacitance will take place after 1000 hours.
Voltage Effects
Ferroelectric materials are also affected by applied
voltage, both alternating and direct. Low values of
voltage produce a slight increase in capacitance and
dissipation factor. Higher voltages cause a decrease
in capacitance. Typically, capacitors with X7R characteristic decrease in capacitance by approximately
10% when rated DC voltage is applied.
A small portion of the decrease in capacitance by
the application of a high DC voltage persists after the
voltage is removed and then disappears gradually.
Customer Testing
Because of temperature and voltage effects, caution
must be used in establishing a testing sequence for
ceramic capacitors. Insulation resistance measurements and tests of dielectric withstanding voltage
both require application of high DC voltage and
cause temporary changes in capacitance. These
tests, therefore, should not be conducted until
capacitance testing is completed. Alternatively, the
capacitors can be “de-aged” at high temperature as
described above. A stabilization time at room ambient of 24 hours should be used after de-aging.
See F-3101 Catalog for more details.
PERFORMANCE CHARACTERISTICS
General Information
Working Voltage:
C0G (BP) - 50,100 & 200 volts
X7R (BX) - 50,100 & 200 volts
Temperature Characteristics:
C0G (BP): 0 ±30 ppm/°C from -55°C to +125°C.
(Limits widen below 20 pF.)
X7R (BX): ±15%; from -55°C to +125°C.
Capacitance Tolerance:
C0G (BP): C - ±0.25pF; D - ±0.5pF; F - ±1%;
G- ±2%; J- ±5%; K- ±10%; M- ±20%.
X7R (BX): J - ±5%; K - ±10%; M - ±20%.
Electrical
Capacitance: Within specified tolerance when
measured with 1 volt RMS @ 1 kHz (1000pF or less
@ 1 MHz for C0G (BP)).
Dissipation Factor:
25°C @ 1 kHz (1000 pF or less at 1 MHz for
C0G (BP)).
C0G (BP): 0.15% maximum
X7R (BX): 2.5% maximum
Insulation Resistance:
After 2 minutes electrification:
at 25°C and rated voltage:
C0G (BP): l00 GΩ or (1000 megohm
X µF), whichever is less.
X7R (BX): l00 GΩ or (1000 megohm
X µF), whichever is less.
at 125°C and rated voltage:
C0G (BP): l0 GΩ or (100 megohm
X µF), whichever is less.
X7R (BX): l0 GΩ or (100 megohm
X µF), whichever is less.
Dielectric Withstanding Voltage: 250% of
rated voltage for 5 seconds with current limited to
50 MA at 25°C.
Aging Rate: % Delta Cap/Decade Hour, Typical
C0G (BP): 0%
X7R (BX): 1.0%
IMPORTANT NOTICE
KEMET Electronics Corporation disclaims all warranties, whether express, implied, or statutory as to any manner whatsoever, including the condition of the equipment, its compatibility with specific requirements, its merchantability, or fitness for any
particular purpose which extend beyond the description on the face hereof.
Furthermore, under no circumstances shall KEMET Electronics Corporation be liable for consequential, special, incidental
or indirect damages resulting from the use or handling of this product.
Finally, KEMET Electronics Corporation does not assume any responsibility for the correctness of the information contained
in this catalog. All design characteristics, specifications, tolerances, and the like are subject to change without notice.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
3
CERAMIC HIGH RELIABILITY CAPACITORS
MIL-PRF-123/GR900
TYPICAL PERFORMANCE CURVES
4
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC HIGH RELIABILITY MOLDED & CHIPS
GENERAL INFORMATION MIL-PRF-123
INTRODUCTION
10. Radiographic Inspection (leaded devices only) (100% of lot).
MIL-PRF-123 specification covers the general requirements for high
reliability, general purpose (BX) and temperature stable (BP) ceramic
dielectric fixed capacitors for space, missile, and other high reliability
applications. Capacitors covered by MIL-PRF-123 may be used in
critical frequency determining applications, timing circuits, and other
applications where absolute stability is required (BP) and in applications where appreciable variations in capacitance with respect to
temperature, voltage, frequency, and life can be tolerated (BX).
11. Visual Inspection per MIL-PRF-123 criteria.
SCREENING TESTS
Each lot has the following In-Process Inspections performed:
1. 100% C-SAM (C-Mode Surface Acoustical Microscopy)
2. In-Process Destructive Physical Analysis
3. 100% visual inspection at a minimum of 10X magnification
4. Pre-encapsulation terminal strength evaluation (leaded devices
only). Radial leaded capacitors must meet a minimum lead pull
of 1.8 kg (4.0 lbs.).
The following Group A shall be performed on each lot:
1. Thermal Shock—Performed in accordance to MIL-STD-202,
Method 107, Condition A, with step 3 being 125°C. Number of
cycles shall be 20 (100% of lot).
2. Voltage Conditioning—The voltage conditioning shall consist
of applying twice the rated voltage to the units at the maximum
rated temperature of 125°C for a minimum of 168 hours and a
maximum of 264 hours. The voltage conditioning may be terminated at any time during 168 hours to 264 hours time interval
that confirmed failures meet the requirements for the PDA during the last 48 hours listed in Table I below (100% of lot).
Optional Voltage Conditioning (Accelerated Voltage
Conditioning)—AII conditions of the standard voltage conditioning apply with the exception of the increased voltage and the
decreased test time. (Refer to Mil-PRF-123 for formula.)
*Step 5 is performed on chips at this point (100% of lot).
3. Dielectric Withstanding Voltage 250% of the dc rated voltage
at 25°C (100% of lot).
4. Insulation Resistance—The 25°C measurement with rated
voltage applied shall be the lesser of 100 GΩ or 1000 megohmmicrofarads (100% of lot).
*5.Insulation Resistance—The 125°C measurement with rated
voltage applied shall be the lesser of 10 GΩ or 100 megohmmicrofarads (1000% of lot). For chips 125°C IR is performed
prior to step 3 above.
6. Storage at 150°C for 2 hours minimum without voltage applied
followed by a 12-hour minimum stabilization period (temperature characteristic BX only).
7. Capacitance must be within specified tolerance at 25°C (100%
of lot). Cap Exclusion: Capacitance values no more than 5% or
.5 pF, whichever is greater, for BX characteristics or 1% or .3 pF,
whichever is greater, for BP characteristics beyond specified tolerance limit shall be removed from the lot but shall not be considered defective for determination of the PDA.
8. Dissipation Factor shall not exceed 2.5% for X dielectric,
0.15% for G dielectric at 25°C (100% of lot).
9. Percent Defective Allowable (PDA). The following table lists
the PDA requirements for MIL-PRF-123 Group A:
KEMET
STYLE
C052Z
C062Z
C512Z
C0805Z
C1210Z
C1808Z
C2225Z
C1206Z
C1812Z
C1825Z
MIL
STYLE
CKS05
CKS06
CKS07
CKS51
CKS52
CKS53
CKS54
CKS55
CKS56
CKS57
TABLE I
BURN IN PDA
LAST 48 HOURS
1 unit or 0.1%
1 unit or 0.2%
1 unit or 0.2%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
PDA
OVERALL
3%
5%
5%
3%
3%
3%
3%
3%
3%
3%
12. Destructive Physical Analysis per EIA-469 and MIL-PRF-123.
SAMPLE TESTS
The following Group B tests shall be performed on samples from
each lot, which have been subjected to and have passed Group A
inspection.
1. Thermal Shock—Performed in accordance to MIL-STD-202,
Method 107, Condition A, with step 3 being 125°C. Number of
cycles shall be 100.
2. Life Test per MIL-5TD-202, Method 108. Test temperature and
tolerance is +125°C +4, -0°C. Capacitors shall be subjected to
2X rated voltage for 1000 hours.
3. Humidity, steady state, low voltage per MIL-STD-202,
Method 103, Condition A. Capacitors shall be subjected to an
environment of 85°C with 85% relative humidity for 240 hours
minimum. Cycling shall not be performed. A dc potential of 1.3
±0.25 volts shall be applied continuously through a 100,000
ohm resistance to each device under test. At completion, 25°C
IR and Cap are read.
4. Voltage-temperature limits—Capacitance is measured at various temperatures (-55°C to +125°C) with and without rated
voltage.
5. Moisture Resistance per MIL-STD-202, Method 106. There
shall be 20 continuous cycles. During the first 10 cycles only, a
dc potential of 50 volts shall be applied across the capacitor terminals. Once each day, a check shall be performed to determine whether a capacitor has shorted. Vibration cycle of MILSTD-202, Method 106, Step 7b shall not be performed. Upon
completion of MIL-STD-202, Method 106, Step 6 of the final
cycle, capacitors shall be measured for capacitance, dielectric
withstanding voltage and insulation resistance.
The following Group C tests shall be performed on samples selected
from lots that have passed Group A and have been submitted for
Group B inspection. Samples shall be selected every two months.
1. Terminal Strength
2. Solderability
3. Resistance to Soldering Heat
4. Solvent Resistance (Leaded devices only)
All lots shipped must have been subjected to and passed Group A
and B testing.
STANDARD PACKAGING FOR
MIL-PRF-123 IS AS FOLLOWS:
C052Z
C062Z
C512Z
tray
tray
1 pc. per bag
C0805Z
C1206Z
C1210Z
C1808Z
C1812Z
C1825Z
C2225Z
chip
chip
chip
chip
chip
chip
chip
tray
tray
tray
tray
tray
tray
tray
DATA PACKAGE
A data package is sent with each shipment which contains:
1. Summary of Group A testing
2. Summary of Group B testing
3. Group B Variables Test Data
4. Lead Pull Data (Leaded Devices Only)
5. Final Destructive Physical Analysis Report
6. Certificate of Compliance stating that the ceramic capacitors
supplied meet all the requirements of MIL-PRF-123, the applicable slash sheet(s) and all associated documents.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
5
CERAMIC MOLDED/RADIAL — MIL-PRF-123
GENERAL INFORMATION
CAPACITOR OUTLINE DRAWINGS - (RADIAL LEADS)
DIMENSIONS — INCHES & (MILLIMETERS)
CASE
SIZE
MILITARY
EQUIVALENT
STYLES
H
HEIGHT
L
LENGTH
W
WIDTH
S
LEAD
SPACING
C052
CKS05
.190 ± .010 (4.83 ± .25)
.190 ± .010 (4.83 ± .25)
.090 ± .010 (2.29 ± .25)
.200 ± .015 (5.08 ± .38)
C062
CKS06
.290 ± .010 (7.37 ±.25)
.290 ± .010 (7.37 ±.25)
.090 ± .010 (2.29 ± .25)
.200 ± .015 (5.08 ± .38)
C512
CKS07
.480 ± .020 (12.19 ± .51)
.480 ± .020 (12.19 ± .51)
.140 ± .010 (3.56 ± .25)*
.400 ± .020 (10.16 ± .51)
*0.200 maximum for some capacitance values.
ORDERING INFORMATION
KEMET PART NUMBER
C 052 Z 102 K 5 G 5 C A
FAILURE RATE
CERAMIC
CASE SIZE
A—Standard — Not applicable
LEAD MATERIAL
Radial
C052
C062
C512
C—Standard
Radial: solder coated copper
INTERNAL CONSTRUCTION
SPECIFICATION
5—Standard
Z — Mil-PRF-123
CAPACITANCE
In picofarad code
TEMPERATURE CHARACTERISTIC
CAPACITANCE TOLERANCE
Standard
C— ±0.25 pF
J— ±5%
D— ±0.5 pF
K— ±10%
F— ±1%
WORKING VOLTAGE
5 — 50
1 — 100
2 – 200
6
Capacitance Change With Temp.
Measured
Measured
Without
With Bias
Temp.
DC Bias
(Rated)
Range, °C
Voltage
Voltage
KEMET
Designator
Military
Equivalent
G
(Ultra
Stable)
BP
-55 to
+125
±30
ppm/°C
±30
ppm/°C
BX
-55 to
+125
±15%
+15%
-25%
X
(Stable)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/RADIAL — MIL-PRF-123 (BP DIELECTRIC)
MIL-PRF-123 MILITARY PART NUMBER
M123 A 01 BX B 103 K C
TERMINATION
Molded
C — Solder-coated copper (radial)
MILITARY
SPECIFICATION
NUMBER
TOLERANCE
C—±0.25pF J—±5%
D—±0.5pF
K—±10%
F—±1%
MODIFICATION LETTER
Indicates the latest characteristics
of the part in the specification sheet.
CAPACITANCE
In picofarad code
MIL-PRF-123 SLASH SHEET NUMBER
Slash
Sheet #
01
02
03
KEMET
Style
C052
C062
C512
Mil-C-123
Style
CKS05
CKS06
CKS07
VOLTAGE
B=50 C=100 D=200
VOLTAGE-TEMPERATURE CHARACTERISTICS
Capacitance Change With Temp.
KEMET
Designator
G
(Ultra
Stable)
X
(Stable)
Military
Equivalent
Temp.
Range, °C
Measured
Measured
Without DC Bias (Rated) With Bias
Voltage
Voltage
BP
-55 to
+125
±30
ppm/°C
±30
ppm/°C
BX
-55 to
+125
±15%
+15%
-25%
RATINGS & PART NUMBER REFERENCE
CAP
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BP - C052 SIZE (MILITARY CKS05)
C052Z479(1)1G5CA
M123A01BPC4R7(1)C
M123A01BPC5R1(1)C
C052Z519(1)1G5CA
M123A01BPC5R6(1)C
C052Z569(1)1G5CA
M123A01BPC6R2(1)C
C052Z629(1)1G5CA
M123A01BPC6R8(1)C
C052Z689(1)1G5CA
M123A01BPC7R5(1)C
C052Z759(1)1G5CA
M123A01BPC8R2(1)C
C052Z829(1)1G5CA
M123A01BPC9R1(1)C
C052Z919(1)1G5CA
M123A01BPC100(2)C
C052Z100(2)1G5CA
M123A01BPC110(2)C
C052Z110(2)1G5CA
M123A01BPC120(2)C
C052Z120(2)1G5CA
M123A01BPC130(2)C
C052Z130(2)1G5CA
M123A01BPC150(2)C
C052Z150(2)1G5CA
M123A01BPC160(2)C
C052Z160(2)1G5CA
M123A01BPC180(2)C
C052Z180(2)1G5CA
200 VOLT / 100 VOLT - BP - C052 SIZE (MILITARY CKS05)
20
C052Z200(2)(4)G5CA
M123A01BP(5)200(2)C
22
C052Z220(2)(4)G5CA
M123A01BP(5)220(2)C
24
C052Z240(2)(4)G5CA
M123A01BP(5)240(2)C
27
C052Z270(3)(4)G5CA
M123A01BP(5)270(3)C
30
C052Z300(3)(4)G5CA
M123A01BP(5)300(3)C
33
C052Z330(3)(4)G5CA
M123A01BP(5)330(3)C
36
C052Z360(3)(4)G5CA
M123A01BP(5)360(3)C
39
C052Z390(3)(4)G5CA
M123A01BP(5)390(3)C
43
C052Z430(3)(4)G5CA
M123A01BP(5)430(3)C
47
C052Z470(3)(4)G5CA
M123A01BP(5)470(3)C
51
C052Z510(3)(4)G5CA
M123A01BP(5)510(3)C
56
C052Z560(3)(4)G5CA
M123A01BP(5)560(3)C
62
C052Z620(3)(4)G5CA
M123A01BP(5)620(3)C
68
C052Z680(3)(4)G5CA
M123A01BP(5)680(3)C
75
C052Z750(3)(4)G5CA
M123A01BP(5)750(3)C
82
C052Z820(3)(4)G5CA
M123A01BP(5)820(3)C
91
C052Z910(3)(4)G5CA
M123A01BP(5)910(3)C
100
C052Z101(3)(4)G5CA
M123A01BP(5)101(3)C
110
C052Z111(3)(4)G5CA
M123A01BP(5)111(3)C
120
C052Z121(3)(4)G5CA
M123A01BP(5)121(3)C
130
C052Z131(3)(4)G5CA
M123A01BP(5)131(3)C
150
C052Z151(3)(4)G5CA
M123A01BP(5)151(3)C
160
C052Z161(3)(4)G5CA
M123A01BP(5)161(3)C
180
C052Z181(3)(4)G5CA
M123A01BP(5)181(3)C
200
C052Z201(3)(4)G5CA
M123A01BP(5)201(3)C
220
C052Z221(3)(4)G5CA
M123A01BP(5)221(3)C
240
C052Z241(3)(4)G5CA
M123A01BP(5)241(3)C
200 VOLT / 100 VOLT / 50 VOLT - BP - C052 SIZE (MILITARY CKS05)
270
C052Z271(3)(6)G5CA
M123A01BP(7)271(3)C
300
C052Z301(3)(6)G5CA
M123A01BP(7)301(3)C
330
C052Z331(3)(6)G5CA
M123A01BP(7)331(3)C
100 VOLT / 50 VOLT - BP - C052 SIZE (MILITARY CKS05)
360
C052Z361(3)(8)G5CA
M123A01BP(9)361(3)C
390
C052Z391(3)(8)G5CA
M123A01BP(9)391(3)C
430
C052Z431(3)(8)G5CA
M123A01BP(9)431(3)C
470
C052Z471(3)(8)G5CA
M123A01BP(9)471(3)C
510
C052Z511(3)(8)G5CA
M123A01BP(9)511(3)C
560
C052Z561(3)(8)G5CA
M123A01BP(9)561(3)C
620
C052Z621(3)(8)G5CA
M123A01BP(9)621(3)C
680
C052Z681(3)(8)G5CA
M123A01BP(9)681(3)C
820
C052Z821(3)(8)G5CA
M123A01BP(9)821(3)C
910
C052Z911(3)(8)G5CA
M123A01BP(9)911(3)C
1000
C052Z102(3)(8)G5CA
M123A01BP(9)102(3)C
1100
C052Z112(3)(8)G5CA
M123A01BP(9)112(3)C
1200
C052Z122(3)(8)G5CA
M123A01BP(9)122(3)C
1300
C052Z132(3)(8)G5CA
M123A01BP(9)132(3)C
1500
C052Z152(3)(8)G5CA
M123A01BP(9)152(3)C
1600
C052Z162(3)(8)G5CA
M123A01BP(9)162(3)C
1800
C052Z182(3)(8)G5CA
M123A01BP(9)182(3)C
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
CAP
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT / 50 VOLT - BP - C052 SIZE (MILITARY CKS05) cont.
50 VOLT - BP - C052 SIZE (MILITARY CKS05)
C052Z202(3)5G5CA
M123A01BPB202(3)C
C052Z222(3)5G5CA
M123A01BPB222(3)C
C052Z242(3)5G5CA
M123A01BPB242(3)C
C052Z272(3)5G5CA
M123A01BPB272(3)C
C052Z302(3)5G5CA
M123A01BPB302(3)C
C052Z332(3)5G5CA
M123A01BPB332(3)C
2000
2200
2400
2700
3000
3300
CAP
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BP - C062 SIZE (MILITARY CKS06)
270
C062Z271(3)1G5CA
M123A02BPC271(3)C
M123A02BPC301(3)C
300
C062Z301(3)1G5CA
M123A02BPC331(3)C
330
C062Z331(3)1G5CA
200 VOLT / 100 VOLT - BP - C062 SIZE (MILITARY CKS06)
360
C062Z361(3)(4)G5CA
M123A02BP(5)361(3)C
390
C062Z391(3)(4)G5CA
M123A02BP(5)391(3)C
430
C062Z431(3)(4)G5CA
M123A02BP(5)431(3)C
470
C062Z471(3)(4)G5CA
M123A02BP(5)471(3)C
510
C062Z511(3)(4)G5CA
M123A02BP(5)511(3)C
560
C062Z561(3)(4)G5CA
M123A02BP(5)561(3)C
620
C062Z621(3)(4)G5CA
M123A02BP(5)621(3)C
680
C062Z681(3)(4)G5CA
M123A02BP(5)681(3)C
750
C062Z751(3)(4)G5CA
M123A02BP(5)751(3)C
820
C062Z821(3)(4)G5CA
M123A02BP(5)821(3)C
910
C062Z911(3)(4)G5CA
M123A02BP(5)911(3)C
1,000
C062Z102(3)(4)G5CA
M123A02BP(5)102(3)C
1,100
C062Z112(3)(4)G5CA
M123A02BP(5)112(3)C
1,200
C062Z122(3)(4)G5CA
M123A02BP(5)122(3)C
1,300
C062Z132(3)(4)G5CA
M123A02BP(5)132(3)C
1,500
C062Z152(3)(4)G5CA
M123A02BP(5)152(3)C
1,600
C062Z162(3)(4)G5CA
M123A02BP(5)162(3)C
1,800
C062Z182(3)(4)G5CA
M123A02BP(5)182(3)C
100 VOLT - BP - C062 SIZE (MILITARY CKS06)
M123A02BPC202(3)C
2,000
C062Z202(3)1G5CA
M123A02BPC222(3)C
2,200
C062Z222(3)1G5CA
M123A02BPC242(3)C
2,400
C062Z242(3)1G5CA
100 VOLT / 50 VOLT - BP - C062 SIZE (MILITARY CKS06)
2,700
C062Z272(3)(8)G5CA
M123A02BP(9)272(3)C
3,000
C062Z302(3)(8)G5CA
M123A02BP(9)302(3)C
3,300
C062Z332(3)(8)G5CA
M123A02BP(9)332(3)C
3,600
C062Z362(3)(8)G5CA
M123A02BP(9)362(3)C
3,900
C062Z392(3)(8)G5CA
M123A02BP(9)392(3)C
4,300
C062Z432(3)(8)G5CA
M123A02BP(9)432(3)C
4,700
C062Z472(3)(8)G5CA
M123A02BP(9)472(3)C
50 VOLT - BP - C062 SIZE (MILITARY CKS06)
M123A02BPB512(3)C
5,100
C062Z512(3)5G5CA
5,600
C062Z562(3)5G5CA
M123A02BPB562(3)C
6,200
C062Z622(3)5G5CA
M123A02BPB622(3)C
6,800
C062Z682(3)5G5CA
M123A02BPB682(3)C
7,500
C062Z752(3)5G5CA
M123A02BPB752(3)C
8,200
C062Z822(3)5G5CA
M123A02BPB822(3)C
10,000
C062Z103(3)5G5CA
M123A02BPB103(3)C
12,000
C062Z123(3)5G5CA
M123A02BPB123(3)C
15,000
C062Z153(3)5G5CA
M123A02BPB153(3)C
18,000
C062Z183(3)5G5CA
M123A02BPB183(3)C
To complete the part number, insert the following tolerances:
(1) C, ±0.25pF; D, ±.0.5pF
(2) C, ±0.25pF; J, ±5%; K, ±10%
(3) F, ±1%; J, ±5%; K, ±10%
To complete the part number, insert the following voltages:
(4) = 2 for 200V or 1 for 100V
(5) = D for 200V or C for 100V
(6) = 2 for 200V, 1 for 100V or 5 for 50V
(7) = D for 200V, C for 100V, or B for 50V
(8) = 1 for 100V or 5 for 50V
(9) = C for 100V or B for 50V
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
7
CERAMIC MOLDED/RADIAL — MIL-PRF-123 (BP/BX DIELECTRIC)
RATINGS & PART NUMBER REFERENCE
CAP
pF
KEMET
PART NUMBER
CAP
pF
MIL-PRF-123
PART NUMBER
200 VOLT - BP - C512 SIZE (MILITARY CKS07)
2,200
C512Z222(3)2G5CA
M123A03BPD222(3)C
200 VOLT / 100 VOLT - BP - C512 SIZE (MILITARY CKS07)
2,700
C512Z272(3)(4)G5CA
M123A03BP(5)272(3)C
3,000
C512Z302(3)(4)G5CA
M123A03BP(5)302(3)C
3,300
C512Z332(3)(4)G5CA
M123A03BP(5)332(3)C
3,600
C512Z362(3)(4)G5CA
M123A03BP(5)362(3)C
3,900
C512Z392(3)(4)G5CA
M123A03BP(5)392(3)C
4,300
C512Z432(3)(4)G5CA
M123A03BP(5)432(3)C
4,700
C512Z472(3)(4)G5CA
M123A03BP(5)472(3)C
100 VOLT - BP - C512 SIZE (MILITARY CKS07)
5,100
C512Z512(3)1G5CA
M123A03BPC512(3)C
5,600
C512Z562(3)1G5CA
M123A03BPC562(3)C
6,200
C512Z622(3)1G5CA
M123A03BPC622(3)C
6,800
C512Z682(3)1G5CA
M123A03BPC682(3)C
7,500
C512Z752(3)1G5CA
M123A03BPC752(3)C
8,200
C512Z822(3)1G5CA
M123A03BPC822(3)C
9,100
C512Z912(3)1G5CA
M123A03BPC912(3)C
10,000
C512Z103(3)1G5CA
M123A03BPC103(3)C
100 VOLT / 50 VOLT - BP - C512 SIZE (MILITARY CKS07)
11,000
C512Z113(3)(8)G5CA
M123A03BP(9)113(3)C
12,000
C512Z123(3)(8)G5CA
M123A03BP(9)123(3)C
15,000
C512Z153(3)(8)G5CA
M123A03BP(9)123(3)C
18,000
C512Z183(3)(8)G5CA
M123A03BP(9)123(3)C
50 VOLT - BP - C512 SIZE (MILITARY CKS07)
13,000
C512Z133(3)5G5CA
M123A03BPB133(3)C
16,000
C512Z163(3)5G5CA
M123A03BPB163(3)C
20,000
C512Z203(3)5G5CA
M123A03BPB203(3)C
22,000
C512Z223(3)5G5CA
M123A03BPB223(3)C
24,000
C512Z243(3)5G5CA
M123A03BPB243(3)C
27,000
C512Z273(3)5G5CA
M123A03BPB273(3)C
30,000
C512Z303(3)5G5CA
M123A03BPB303(3)C
33,000
C512Z333(3)5G5CA
M123A03BPB333(3)C
36,000
C512Z363(3)5G5CA
M123A03BPB363(3)C
39,000
C512Z393(3)5G5CA
M123A03BPB393(3)C
43,000
C512Z433(3)5G5CA
M123A03BPB433(3)C
47,000
C512Z473(3)5G5CA
M123A03BPB473(3)C
51,000
C512Z513(3)5G5CA
M123A03BPB513(3)C
56,000
C512Z563(3)5G5CA
M123A03BPB563(3)C
62,000
C512Z623(3)5G5CA
M123A03BPB623(3)C
68,000
C512Z683(3)5G5CA
M123A03BPB683(3)C
75,000
C512Z753(3)5G5CA
M123A03BPB753(3)C
82,000
C512Z823(3)5G5CA
M123A03BPB823(3)C
91,000
C512Z913(3)5G5CA
M123A03BPB913(3)C
100,000
C512Z104(3)5G5CA
M123A03BPB104(3)C
CAP
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BX - C052 SIZE (MILITARY CKS05)
270
C052Z271K1X5CA
M123A01BXC271KC
330
C052Z331K1X5CA
M123A01BXC331KC
390
C052Z391K1X5CA
M123A01BXC391KC
470
C052Z471K1X5CA
M123A01BX4271KC
560
C052Z561K1X5CA
M123A01BXC561KC
680
C052Z681K1X5CA
M123A01BXC681KC
820
C052Z821K1X5CA
M123A01BXC821KC
1,000
C052Z102K1X5CA
M123A01BXC102KC
1,200
C052Z122K1X5CA
M123A01BXC122KC
1,500
C052Z152K1X5CA
M123A01BXC152KC
1,800
C052Z182K1X5CA
M123A01BXC182KC
2,200
C052Z222K1X5CA
M123A01BXC222KC
2,700
C052Z272K1X5CA
M123A01BXC272KC
3,300
C052Z332K1X5CA
M123A01BXC332KC
3,900
C052Z392K1X5CA
M123A01BXC392KC
4,700
C052Z472K1X5CA
M123A01BXC472KC
50 VOLT - BX - C052 SIZE (MILITARY CKS05)
5,600
C052Z562K5X5CA
M123A01BXB562KC
6,800
C052Z682K5X5CA
M123A01BXB682KC
8,200
C052Z822K5X5CA
M123A01BXB822KC
10,000
C052Z103K5X5CA
M123A01BXB103KC
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BX - C062 SIZE (MILITARY CKS06)
5,600 C062Z562K1X5CA
M123A02BXC562KC
6,800 C062Z682K1X5CA
M123A02BXC682KC
8,200 C062Z822K1X5CA
M123A02BXC822KC
10,000 C062Z103K1X5CA
M123A02BXC103KC
12,000 C062Z123K1X5CA
M123A02BXC123KC
15,000 C062Z153K1X5CA
M123A02BXC153KC
18,000 C062Z183K1X5CA
M123A02BXC183KC
22,000 C062Z223K1X5CA
M123A02BXC223KC
27,000 C062Z273K1X5CA
M123A02BXC273KC
33,000 C062Z333K1X5CA
M123A02BXC333KC
39,000 C062Z393K1X5CA
M123A02BXC393KC
47,000 C062Z473K1X5CA
M123A02BXC473KC
56,000 C062Z563K1X5CA
M123A02BXC563KC
68,000 C062Z683K1X5CA
M123A02BXC683KC
82,000 C062Z823K1X5CA
M123A02BXC823KC
100,000 C062Z104K1X5CA
M123A02BXC104KC
50 VOLT - BX - C062 SIZE (MILITARY CKS06)
56,000 C062Z563K5X5CA
M123A02BXB563KC
68,000 C062Z683K5X5CA
M123A02BXB683KC
82,000 C062Z823K5X5CA
M123A02BXB823KC
100,000 C062Z104K5X5CA
M123A02BXB104KC
120,000 C062Z124K5X5CA
M123A02BXB124KC
150,000 C062Z154K5X5CA
M123A02BXB154KC
180,000 C062Z184K5X5CA
M123A02BXB184KC
220,000 C062Z224K5X5CA
M123A02BXB224KC
270,000 C062Z274K5X5CA
M123A02BXB274KC
330,000 C062Z334K5X5CA
M123A02BXB334KC
390,000 C062Z394K5X5CA
M123A02BXB394KC
470,000 C062Z474K5X5CA
M123A02BXB474KC
560,000 C062Z564K5X5CA
M123A02BXB564KC
680,000 C062Z684K5X5CA
M123A02BXB684KC
820,000 C062Z824K5X5CA
M123A02BXB824KC
1,000,000 C062Z105K5X5CA
M123A02BXB105KC
CAP
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BX - C512 SIZE (MILITARY CKS07)
56,000
C512Z563K1X5CA
M123A03BXC563KC
68,000
C512Z683K1X5CA
M123A03BXC683KC
82,000
C512Z823K1X5CA
M123A03BXC823KC
100,000
C512Z104K1X5CA
M123A03BXC104KC
120,000
C512Z124K1X5CA
M123A03BXC124KC
150,000
C512Z154K1X5CA
M123A03BXC154KC
180,000
C512Z184K1X5CA
M123A03BXC184KC
220,000
C512Z224K1X5CA
M123A03BXC224KC
270,000
C512Z274K1X5CA
M123A03BXC274KC
330,000
C512Z334K1X5CA
M123A03BXC334KC
390,000
C512Z394K1X5CA
M123A03BXC394KC
470,000
C512Z474K1X5CA
M123A03BXC474KC
50 VOLT - BX - C512 SIZE (MILITARY CKS07)
560,000 C512Z564K5X5CA
M123A03BXB564KC
680,000 C512Z684K5X5CA
M123A03BXB684KC
820,000 C512Z824K5X5CA
M123A03BXB824KC
1,000,000 C512Z105K5X5CA
M123A03BXB105KC
To complete the part number, insert the following tolerances:
(1) C, ±0.25pF; D, ±.0.5pF
(2) C, ±0.25pF; J, ±5%; K, ±10%
(3) F, ±1%; J, ±5%; K, ±10%
To complete the part number, insert the following voltages:
(4) = 2 for 200V or 1 for 100V
(5) = D for 200V or C for 100V
(6) = 2 for 200V, 1 for 100V or 5 for 50V
(7) = D for 200V, C for 100V, or B for 50V
To complete
numbers,
insert the following tolerances: (1) C, ±0.25pF;
(8) = 1 forthe
100Vpart
or 5 for
50V
(9) = C (2)
for 100V
or B for 50V J, ±5%; K, ±10% (3) F, ±1%; J, ±5%; K, ±10%
D, ±0.5pF
C, ±0.25pF;
MARKING INFORMATION
M123A
01BPC
4R7CC
JAN
XXXX*
31433
8
C052Z
MIL-PRF-123
Part Number
— “JAN”
— Date Lot Code
— CAGE
M123A
02BPC
271FC
JAN
271F
100V
XXXX*
31433
C062Z, C512Z
MIL-PRF-123
Part Number
“JAN”
—
—
—
—
CAGE =
Commercial and
Government Entity
Capacitance Code & Tolerance
Voltage
Date Lot Code
CAGE
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIP/MIL-PRF-123
CAPACITOR OUTLINE DRAWINGS
NOTE: For solder coated termination, add 0.015” (0.38mm) to the positive width and thickness tolerances. Add the following to the positive
length tolerance: CKS51 - 0.020” (0.51mm); CKS52, CKS53 and CKS54 - 0.025 (0.64mm); add 0.012” (0.30mm) to the bandwidth tolerance.
DIMENSIONS — INCHES
Chip
Size
Military
Equivalent
Styles
L
Length
W
Width
T
Thickness
Maximum
0805
CKS51
0.080 ± 0.015
0.050 ± 0.015
0.055
1210
CKS52
0.120 ± 0.015
0.100 ± 0.015
0.065
1808
CKS53
0.180 ± 0.015
0.080 ± 0.015
0.065
2225
CKS54
0.220 ± 0.015
0.250 ± 0.015
0.070
1206
CKS55
0.120 ± 0.015
0.060 ± 0.015
0.065
1812
CKS56
0.180 ± 0.015
0.125 ± 0.015
0.080
1825
CKS57
0.180 ± 0.015
0.250 ± 0.015
0.080
MARKING
Capacitors shall be legibly laser
marked in contrasting color with
the KEMET trademark and
2-digit capacitance symbol.
KEMET ORDERING INFORMATION
C 0805 Z 101 K 5 G A L
Termination
Ceramic
Chip Size
H = Nickel Guarded, Solder-Coated (Sn60)
L = 70/30 Tin/Lead Plated
0805, 1206, 1210, 1808, 1812, 1825, 2225
Failure Rate
Specification
(%/1000 Hours)
A - Standard — Not Applicable
Z — Mil-PRF-123
Temperature Characteristic
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
Capacitance Tolerance
C— ±0.25pF
D— ±0.5 pF
F— ±1%
J— ±5%
K— ±10%
KEMET
Designator
Military
Equivalent
Temp.
Range, °C
Measured Without
DC BiasVoltage
G
(Ultra Stable)
BP
-55 to
+125
±30
ppm °C
±30
ppm °C
-55 to
+125
±15%
+15%
-25%
X
(Stable)
Working Voltage
BX
Measured With Bias
(Rated Voltage)
5 — 50; 1 — 100
M123 A
10
BX
B
472
K
Z
Termination
Z = 70/30 Tin Lead Plated
S = Nickel guarded Soldercoated (Sn60)
Military Specification
Number
Modification Number
Indicates the latest characteristics of
the part in the specification sheet
Tolerance
C = ±0.25pF; D = ±0.5pF;
F = ±1%; J = ±5%; K = ± 10%
MIL-PRF-123 Slash Sheet Number
Capacitance Picofarad Code
Slash Sheet # KEMET Style
Voltage
B = 50; C = 100
MIL-PRF-123
Style
10
C0805
CKS51
11
12
C1210
C1808
CKS52
CKS53
13
C2225
CKS54
21
C1206
CKS55
22
C1812
CKS56
23
C1825
CKS57
Temperature Characteristic
Capacitance Change with Temperature
Temp.
KEMET
Military
Range,
Designator Equivalent
°C
Measured Without
DC Bias Voltage
Measured With
Bias (Rated
Voltage)
G
(UltraStable)
BP
-55 to
125
±30
ppm°C
±30
ppm°C
X
(Stable)
BX
-55 to
+125
±15%
+15%
-25%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
9
CERAMIC CHIP/MIL-PRF-123 (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50/100 VOLT- BP-C0805 SIZE (MILITARY CKS51)
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
68.0
75.0
82.0
91.0
100.0
110.0
120.0
130.0
150.0
160.0
180.0
200.0
220.0
240.0
270.0
300.0
330.0
360.0
390.0
430.0
470.0
C0805Z109(1)(8)GA(9)
C0805Z119(1)(8)GA(9)
C0805Z129(1)(8)GA(9)
C0805Z139(1)(8)GA(9)
C0805Z159(1)(8)GA(9)
C0805Z169(1)(8)GA(9)
C0805Z189(1)(8)GA(9)
C0805Z209(1)(8)GA(9)
C0805Z229(1)(8)GA(9)
C0805Z249(1)(8)GA(9)
C0805Z279(1)(8)GA(9)
C0805Z309(1)(8)GA(9)
C0805Z339(1)(8)GA(9)
C0805Z369(1)(8)GA(9)
C0805Z399(1)(8)GA(9)
C0805Z439(1)(8)GA(9)
C0805Z479(1)(8)GA(9)
C0805Z519(1)(8)GA(9)
C0805Z569(1)(8)GA(9)
C0805Z629(1)(8)GA(9)
C0805Z689(1)(8)GA(9)
C0805Z759(1)(8)GA(9)
C0805Z829(1)(8)GA(9)
C0805Z919(1)(8)GA(9)
C0805Z100(2)(8)GA(9)
C0805Z110(2)(8)GA(9)
C0805Z120(2)(8)GA(9)
C0805Z130(2)(8)GA(9)
C0805Z150(2)(8)GA(9)
C0805Z160(2)(8)GA(9)
C0805Z180(2)(8)GA(9)
C0805Z200(2)(8)GA(9)
C0805Z220(2)(8)GA(9)
C0805Z240(2)(8)GA(9)
C0805Z270(3)(8)GA(9)
C0805Z300(3)(8)GA(9)
C0805Z330(3)(8)GA(9)
C0805Z360(3)(8)GA(9)
C0805Z390(3)(8)GA(9)
C0805Z430(3)(8)GA(9)
C0805Z470(3)(8)GA(9)
C0805Z510(3)(8)GA(9)
C0805Z560(3)(8)GA(9)
C0805Z620(3)(8)GA(9)
C0805Z680(3)(8)GA(9)
C0805Z750(3)(8)GA(9)
C0805Z820(3)(8)GA(9)
C0805Z910(3)(8)GA(9)
C0805Z101(3)(8)GA(9)
C0805Z111(3)(8)GA(9)
C0805Z121(3)(8)GA(9)
C0805Z131(3)(8)GA(9)
C0805Z151(3)(8)GA(9)
C0805Z161(3)(8)GA(9)
C0805Z181(3)(8)GA(9)
C0805Z201(3)(8)GA(9)
C0805Z221(3)(8)GA(9)
C0805Z241(3)(8)GA(9)
C0805Z271(3)(8)GA(9)
C0805Z301(3)(8)GA(9)
C0805Z331(3)(8)GA(9)
C0805Z361(3)(8)GA(9)
C0805Z391(3)(8)GA(9)
C0805Z431(3)(8)GA(9)
C0805Z471(3)(8)GA(9)
M123A10BP(7)1R0(1)(10)
M123A10BP(7)1R1(1)(10)
M123A10BP(7)1R2(1)(10)
M123A10BP(7)1R3(1)(10)
M123A10BP(7)1R5(1)(10)
M123A10BP(7)1R6(1)(10)
M123A10BP(7)1R8(1)(10)
M123A10BP(7)2R0(1)(10)
M123A10BP(7)2R2(1)(10)
M123A10BP(7)2R4(1)(10)
M123A10BP(7)2R7(1)(10)
M123A10BP(7)3R0(1)(10)
M123A10BP(7)3R3(1)(10)
M123A10BP(7)3R6(1)(10)
M123A10BP(7)3R9(1)(10)
M123A10BP(7)4R3(1)(10)
M123A10BP(7)4R7(1)(10)
M123A10BP(7)5R1(1)(10)
M123A10BP(7)5R6(1)(10)
M123A10BP(7)6R2(1)(10)
M123A10BP(7)6R8(1)(10)
M123A10BP(7)7R5(1)(10)
M123A10BP(7)8R2(1)(10)
M123A10BP(7)9R1(1)(10)
M123A10BP(7)100(2)(10)
M123A10BP(7)110(2)(10)
M123A10BP(7)120(2)(10)
M123A10BP(7)130(2)(10)
M123A10BP(7)150(2)(10)
M123A10BP(7)160(2)(10)
M123A10BP(7)180(2)(10)
M123A10BP(7)200(2)(10)
M123A10BP(7)220(2)(10)
M123A10BP(7)240(2)(10)
M123A10BP(7)270(3)(10)
M123A10BP(7)300(3)(10)
M123A10BP(7)330(3)(10)
M123A10BP(7)360(3)(10)
M123A10BP(7)390((3)(10)
M123A10BP(7)430(3)(10)
M123A10BP(7)470(3)(10)
M123A10BP(7)510(3)(10)
M123A10BP(7)560(3)(10)
M123A10BP(7)620(3)(10)
M123A10BP(7)680(3)(10)
M123A10BP(7)750(3)(10)
M123A10BP(7)820(3)(10)
M123A10BP(7)910(3)(10)
M123A10BP(7)101(3)(10)
M123A10BP(7)111(3)(10)
M123A10BP(7)121(3)(10)
M123A10BP(7)131(3)(10)
M123A10BP(7)151(3)(10)
M123A10BP(7)161(3)(10)
M123A10BP(7)181(3)(10)
M123A10BP(7)201(3)(10)
M123A10BP(7)221(3)(10)
M123A10BP(7)241(3)(10)
M123A10BP(7)271(3)(10)
M123A10BP(7)301(3)(10)
M123A10BP(7)331(3)(10)
M123A10BP(7)361(3)(10)
M123A10BP(7)391(3)(10)
M123A10BP(7)431(3)(10)
M123A10BP(7)471(3)(10)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50 VOLT-BP-C0805 SIZE (MILITARY CKS51)
510.0
C0805Z511(3)5GA(9)
M123A10BPB511(3)(10)
560.0
C0805Z561(3)5GA(9)
M123A10BPB561(3)(10)
620.0
C0805Z621(3)5GA(9)
M123A10BPB621(3)(10)
680.0
C0805Z681(3)5GA(9)
M123A10BPB681(3)(10)
50/100 VOLT-BX-C0805 SIZE (MILITARY CKS51)
330.0
C0805Z331K(8)XA(9)
M123A10BX(7)331K(10)
390.0
C0805Z391K(8)XA(9)
M123A10BX(7)391K(10)
470.0
C0805Z471K(8)XA(9)
M123A10BX(7)471K(10)
560.0
C0805Z561K(8)XA(9)
M123A10BX(7)561K(10)
680.0
C0805Z681K(8)XA(9)
M123A10BX(7)681K(10)
820.0
C0805Z821K(8)XA(9)
M123A10BX(7)821K(10)
1,000.0
C0805Z102K(8)XA(9)
M123A10BX(7)102K(10)
1,200.0
C0805Z122K(8)XA(9)
M123A10BX(7)122K(10)
1,500.0
C0805Z152K(8)XA(9)
M123A10BX(7)152K(10)
1,800.0
C0805Z182K(8)XA(9)
M123A10BX(7)182K(10)
2,200.0
C0805Z222K(8)XA(9)
M123A10BX(7)222K(10)
2,700.0
C0805Z272K(8)XA(9)
M123A10BX(7)272K(10)
3,300.0
C0805Z332K(8)XA(9)
M123A10BX(7)332K(10)
3,900.0
C0805Z392K(8)XA(9)
M123A10BX(7)392K(10)
4,700.0
C0805Z472K(8)XA(9)
M123A10BX(7)472K(10)
50 VOLT-BX-C0805 SIZE (MILITARY CKS51)
5,600.0
C0805Z562K5XA(9)
M123A10BXB562K(10)
6,800.0
C0805Z682K5XA(9)
M123A10BXB682K(10)
8,200.0
C0805Z822K5XA(9)
M123A10BXB822K(10)
10,000.0
C0805Z103K5XA(9)
M123A10BXB103K(10)
12,000.0
C0805Z123K5XA(9)
M123A10BXB123K(10)
15,000.0
C0805Z153K5XA(9)
M123A10BXB153K(10)
18,000.0
C0805Z183K5XA(9)
M123A10BXB183K(10)
50/100 VOLT-BP-C1210 SIZE (MILITARY CKS52)
300.0
C1210Z301(3)(8)GA(9) M123A11BP(7)301(3)(10)
330.0
C1210Z331(3)(8)GA(9) M123A11BP(7)331(3)(10)
360.0
C1210Z361(3)(8)GA(9) M123A11BP(7)361(3)(10)
390.0
C1210Z391(3)(8)GA(9) M123A11BP(7)391(3)(10)
430.0
C1210Z431(3)(8)GA(9) M123A11BP(7)431(3)(10)
470.0
C1210Z471(3)(8)GA(9) M123A11BP(7)471(3)(10)
510.0
C1210Z511(3)(8)GA(9) M123A11BP(7)511(3)(10)
560.0
C1210Z561(3)(8)GA(9) M123A11BP(7)561(3)(10)
620.0
C1210Z621(3)(8)GA(9) M123A11BP(7)621(3)(10)
680.0
C1210Z681(3)(8)GA(9) M123A11BP(7)681(3)(10)
750.0
C1210Z751(3)(8)GA(9) M123A11BP(7)751(3)(10)
820.0
C1210Z821(3)(8)GA(9) M123A11BP(7)821(3)(10)
910.0
C1210Z911(3)(8)GA(9) M123A11BP(7)911(3)(10)
1,000.0
C1210Z102(3)(8)GA(9) M123A11BP(7)102(3)(10)
1,100.0
C1210Z112(3)(8)GA(9) M123A11BP(7)112(3)(10)
1,200.0
C1210Z122(3)(8)GA(9) M123A11BP(7)122(3)(10)
1,300.0
C1210Z132(3)(8)GA(9) M123A11BP(7)132(3)(10)
1,500.0
C1210Z152(3)(8)GA(9) M123A11BP(7)152(3)(10)
1,600.0
C1210Z162(3)(8)GA(9) M123A11BP(7)162(3)(10)
1,800.0
C1210Z182(3)(8)GA(9) M123A11BP(7)182(3)(10)
2,000.0
C1210Z202(3)(8)GA(9) M123A11BP(7)202(3)(10)
2,200.0
C1210Z222(3)(8)GA(9) M123A11BP(7)222(3)(10)
50 VOLT-BP-C1210 SIZE (MILITARY CKS52)
2,400.0
C1210Z242(3)5GA(9)
M123A11BPB242(3)(10)
2,700.0
C1210Z272(3)5GA(9)
M123A11BPB272(3)(10)
3,000.0
C1210Z302(3)5GA(9)
M123A11BPB302(3)(10)
3,300.0
C1210Z332(3)5GA(9)
M123A11BPB332(3)(10)
50/100 VOLT-BX-C1210 SIZE (MILITARY CKS52)
5,600.0
C1210Z562(6)(8)XA(9) M123A11BX(7)562(6)(10)
6,800.0
C1210Z682(6)(8)XA(9) M123A11BX(7)682(6)(10)
8,200.0
C1210Z822(6)(8)XA(9) M123A11BX(7)822(6)(10)
10,000.0
C1210Z103(6)(8)XA(9) M123A11BX(7)103(6)(10)
12,000.0
C1210Z123(6)(8)XA(9) M123A11BX(7)123(6)(10)
15,000.0
C1210Z153(6)(8)XA(9) M123A11BX(7)153(6)(10)
18,000.0
C1210Z183(6)(8)XA(9) M123A11BX(7)183(6)(10)
22,000.0
C1210Z223(6)(8)XA(9) M123A11BX(7)223(6)(10)
27,000.0
C1210Z273(6)(8)XA(9) M123A11BX(7)273(6)(10)
50 VOLT-BX-C1210 SIZE (MILITARY CKS52)
33,000.0
39,000.0
47,000.0
56,000.0
68,000.0
82,000.0
100,000.0
C1210Z333(6)5XA(9)
C1210Z393(6)5XA(9)
C1210Z473(6)5XA(9)
C1210Z563(6)5XA(9)
C1210Z683(6)5XA(9)
C1210Z823(6)5XA(9)
C1210Z104(6)5XA(9)
M123A11BXB333(6)(10)
M123A11BXB393(6)(10)
M123A11BXB473(6)(10)
M123A11BXB563(6)(10)
M123A11BXB683(6)(10)
M123A11BXB823(6)(10)
M123A11BXB104(6)(10)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50/100 VOLT-BP-C1808 SIZE (MILITARY CKS53)
300.0
C1808Z301(3)(8)GA(9) M123A12BP(7)301(3)(10)
330.0
C1808Z331(3)(8)GA(9) M123A12BP(7)331(3)(10)
360.0
C1808Z361(3)(8)GA(9) M123A12BP(7)361(3)(10)
390.0
C1808Z391(3)(8)GA(9) M123A12BP(7)391(3)(10)
430.0
C1808Z431(3)(8)GA(9) M123A12BP(7)431(3)(10)
470.0
C1808Z471(3)(8)GA(9) M123A12BP(7)471(3)(10)
510.0
C1808Z511(3)(8)GA(9) M123A12BP(7)511(3)(10)
560.0
C1808Z561(3)(8)GA(9) M123A12BP(7)561(3)(10)
620.0
C1808Z621(3)(8)GA(9) M123A12BP(7)621(3)(10)
680.0
C1808Z681(3)(8)GA(9) M123A12BP(7)681(3)(10)
750.0
C1808Z751(3)(8)GA(9) M123A12BP(7)751(3)(10)
820.0
C1808Z821(3)(8)GA(9) M123A12BP(7)821(3)(10)
910.0
C1808Z911(3)(8)GA(9) M123A12BP(7)911(3)(10)
1,000.0
C1808Z102(3)(8)GA(9) M123A12BP(7)102(3)(10)
50/100 VOLT-BX-C1808 SIZE (MILITARY CKS53)
5,600.0
C1808Z562K(8)XA(9)
M123A12BX(7)562K(10)
6,800.0
C1808Z682K(8)XA(9)
M123A12BX(7)682K(10)
8,200.0
C1808Z822K(8)XA(9)
M123A12BX(7)822K(10)
10,000.0
C1808Z103K(8)XA(9)
M123A12BX(7)103K(10)
12,000.0
C1808Z123K(8)XA(9)
M123A12BX(7)123K(10)
15,000.0
C1808Z153K(8)XA(9)
M123A12BX(7)153K(10)
18,000.0
C1808Z183K(8)XA(9)
M123A12BX(7)183K(10)
22,000.0
C1808Z223K(8)XA(9)
M123A12BX(7)223K(10)
27,000.0
C1808Z273K(8)XA(9)
M123A12BX(7)273K(10)
33,000.0
C1808Z333K(8)XA(9)
M123A12BX(7)333K(10)
50 VOLT-BX-C1808 SIZE (MILITARY CKS53)
39,000.0
C1808Z393K5XA(9)
M123A12BXB393K(10)
47,000.0
C1808Z473K5XA(9)
M123A12BXB473K(10)
56,000.0
C1808Z563K5XA(9)
M123A12BXB563K(10)
68,000.0
C1808Z683K5XA(9)
M123A12BXB683K(10)
82,000.0
C1808Z823K5XA(9)
M123A12BXB823K(10)
100,000.0
C1808Z104K5XA(9)
M123A12BXB104K(10)
50 VOLT-BP-C2225 SIZE (MILITARY CKS54)
1,100.0
C2225Z112(3)5GA(9)
M123A13BPB112(3)(10)
1,200.0
C2225Z122(3)5GA(9)
M123A13BPB122(3)(10)
1,300.0
C2225Z132(3)5GA(9)
M123A13BPB132(3)(10)
1,500.0
C2225Z152(3)5GA(9)
M123A13BPB152(3)(10)
1,600.0
C2225Z162(3)5GA(9)
M123A13BPB162(3)(10)
1,800.0
C2225Z182(3)5GA(9)
M123A13BPB182(3)(10)
2,000.0
C2225Z202(3)5GA(9)
M123A13BPB202(3)(10)
2,200.0
C2225Z222(3)5GA(9)
M123A13BPB222(3)(10)
2,400.0
C2225Z242(3)5GA(9)
M123A13BPB242(3)(10)
2,700.0
C2225Z272(3)5GA(9)
M123A13BPB272(3)(10)
3,000.0
C2225Z302(3)5GA(9)
M123A13BPB302(3)(10)
3,300.0
C2225Z332(3)5GA(9)
M123A13BPB332(3)(10)
3,600.0
C2225Z362(3)5GA(9)
M123A13BPB362(3)(10)
3,900.0
C2225Z392(3)5GA(9)
M123A13BPB392(3)(10)
4,300.0
C2225Z432(3)5GA(9)
M123A13BPB432(3)(10)
4,700.0
C2225Z472(3)5GA(9)
M123A13BPB472(3)(10)
5,100.0
C2225Z512(3)5GA(9)
M123A13BPB512(3)(10)
5,600.0
C2225Z562(3)5GA(9)
M123A13BPB562(3)(10)
6,200.0
C2225Z622(3)5GA(9)
M123A13BPB622(3)(10)
6,800.0
C2225Z682(3)5GA(9)
M123A13BPB682(3)(10)
7,500.0
C2225Z752(3)5GA(9)
M123A13BPB752(3)(10)
8,200.0
C2225Z822(3)5GA(9)
M123A13BPB822(3)(10)
9,100.0
C2225Z912(3)5GA(9)
M123A13BPB912(3)(10)
10,000.0
C2225Z103(3)5GA(9)
M123A13BPB103(3)(10)
50 VOLT-BP-C2225 SIZE (MILITARY CKS54)
120,000.0
150,000.0
180,000.0
220,000.0
270,000.0
330,000.0
390,000.0
470,000.0
560,000.0
680,000.0
820,000.0
1,000,000.0
C2225Z124K5XA(9)
C2225Z154K5XA(9)
C2225Z184K5XA(9)
C2225Z224K5XA(9)
C2225Z274K5XA(9)
C2225Z334K5XA(9)
C2225Z394K5XA(9)
C2225Z474K5XA(9)
C2225Z564K5XA(9)
C2225Z684K5XA(9)
C2225Z824K5XA(9)
C2225Z105K5XA(9)
M123A13BXB124K(10)
M123A13BXB154K(10)
M123A13BXB184K(10)
M123A13BXB224K(10)
M123A13BXB274K(10)
M123A13BXB334K(10)
M123A13BXB394K(10)
M123A13BXB474K(10)
M123A13BXB564K(10)
M123A13BXB684K(10)
M123A13BXB824K(10)
M123A13BXB105K(10)
To complete the KEMET part numbers, insert the following tolerance:
(1)
C = ±0.25pF; D = ±0.5pF
(2)
C = ±0.25pF; J = ±5%; K = ±10%
(3)
F = ±1%; J = ±5%; K = ±10%
(4)
B = ±0.1pF; C = ±0.25pF
(5)
B = ±0.1pF; C = 0.25pF; D = 0.50pF
(6)
K = ±10%; M =±20%
To complete the KEMET part numbers, insert the following voltage:
(7)
B = 50 volts; C = 100 volts
(8)
5 = 50 volts; 1 = 100 volts
To complete the KEMET part numbers, insert termination designation:
(9)
H = Nickel Guarded, Solder Coated (Sn60); L = 70/30 Tin/Lead Plated
(10) S = Nickel Guarded, Solder Coated (Sn60); Z = 70/30 Tin/Lead Plated
10
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIP/MIL-PRF-123 (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BP - C1206 SIZE (MILITARY CKS55)
1.0
C1206Z109(4)1GA(9) M123A21BPC1R0(4)(10)
1.1
C1206Z119(4)1GA(9) M123A21BPC1R1(4)(10)
1.2
C1206Z129(4)1GA(9) M123A21BPC1R2(4)(10)
1.3
C1206Z139(4)1GA(9) M123A21BPC1R3(4)(10)
1.5
C1206Z159(4)1GA(9) M123A21BPC1R5(4)(10)
1.6
C1206Z169(4)1GA(9) M123A21BPC1R6(4)(10)
1.8
C1206Z189(4)1GA(9) M123A21BPC1R8(4)(10)
2.0
C1206Z209(4)1GA(9) M123A21BPC2R0(4)(10)
2.2
C1206Z229(4)1GA(9) M123A21BPC2R2(4)(10)
2.4
C1206Z249(4)1GA(9) M123A21BPC2R4(4)(10)
2.7
C1206Z279(5)1GA(9) M123A21BPC2R7(5)(10)
3.0
C1206Z309(5)1GA(9) M123A21BPC3R0(5)(10)
3.3
C1206Z339(5)1GA(9) M123A21BPC3R3(5)(10)
3.6
C1206Z369(5)1GA(9) M123A21BPC3R6(5)(10)
3.9
C1206Z399(5)1GA(9) M123A21BPC3R9(5)(10)
4.3
C1206Z439(5)1GA(9)+ M123A21BPC4R3(5)(10)
4.7
C1206Z479(5)1GA(9) M123A21BPC4R7(5)(10)
5.1
C1206Z519(5)1GA(9) M123A21BPC5R1(5)(10)
5.6
C1206Z569(5)1GA(9) M123A21BPC5R6(5)(10)
6.2
C1206Z629(5)1GA(9) M123A21BPC6R2(5)(10)
6.8
C1206Z689(5)1GA(9) M123A21BPC6R8(5)(10)
7.5
C1206Z759(5)1GA(9) M123A21BPC7R5(5)(10)
8.2
C1206Z829(5)1GA(9) M123A21BPC8R2(5)(10)
9.1
C1206Z919(5)1GA(9) M123A21BPC9R1(5)(10)
10.0
C1206Z100(3)1GA(9) M123A21BPC100(3)(10)
11.0
C1206Z110(3)1GA(9) M123A21BPC110(3)(10)
12.0
C1206Z120(3)1GA(9) M123A21BPC120(3)(10)
13.0
C1206Z130(3)1GA(9) M123A21BPC130(3)(10)
15.0
C1206Z150(3)1GA(9) M123A21BPC150(3)(10)
16.0
C1206Z160(3)1GA(9) M123A21BPC160(3)(10)
18.0
C1206Z180(3)1GA(9) M123A21BPC180(3)(10)
20.0
C1206Z200(3)1GA(9) M123A21BPC200(3)(10)
24.0
C1206Z240(3)1GA(9) M123A21BPC240(3)(10)
27.0
C1206Z270(3)1GA(9) M123A21BPC270(3)(10)
33.0
C1206Z330(3)1GA(9) M123A21BPC330(3)(10)
36.0
C1206Z360(3)1GA(9) M123A21BPC360(3)(10)
39.0
C1206Z390(3)1GA(9) M123A21BPC390(3)(10)
43.0
C1206Z430(3)1GA(9) M123A21BPC430(3)(10)
47.0
C1206Z470(3)1GA(9) M123A21BPC470(3)(10)
51.0
C1206Z510(3)1GA(9) M123A21BPC510(3)(10)
56.0
C1206Z560(3)1GA(9) M123A21BPC560(3)(10)
62.0
C1206Z620(3)1GA(9) M123A21BPC620(3)(10)
68.0
C1206Z680(3)1GA(9) M123A21BPC680(3)(10)
75.0
C1206Z750(3)1GA(9) M123A21BPC750(3)(10)
82.0
C1206Z820(3)1GA(9) M123A21BPC820(3)(10)
91.0
C1206Z910(3)1GA(9) M123A21BPC910(3)(10)
100.0
C1206Z101(3)1GA(9) M123A21BPC101(3)(10)
110.0
C1206Z111(3)1GA(9) M123A21BPC111(3)(10)
120.0
C1206Z121(3)1GA(9) M123A21BPC121(3)(10)
130.0
C1206Z131(3)1GA(9) M123A21BPC131(3)(10)
150.0
C1206Z151(3)1GA(9) M123A21BPC151(3)(10)
160.0
C1206Z161(3)1GA(9) M123A21BPC161(3)(10)
180.0
C1206Z181(3)1GA(9) M123A21BPC181(3)(10)
200.0
C1206Z201(3)1GA(9) M123A21BPC201(3)(10)
220.0
C1206Z221(3)1GA(9) M123A21BPC221(3)(10)
240.0
C1206Z241(3)1GA(9) M123A21BPC241(3)(10)
270.0
C1206Z271(3)1GA(9) M123A21BPC271(3)(10)
300.0
C1206Z301(3)1GA(9) M123A21BPC301(3)(10)
330.0
C1206Z331(3)1GA(9) M123A21BPC331(3)(10)
360.0
C1206Z361(3)1GA(9) M123A21BPC361(3)(10)
390.0
C1206Z391(3)1GA(9) M123A21BPC391(3)(10)
430.0
C1206Z431(3)1GA(9) M123A21BPC431(3)(10)
470.0
C1206Z471(3)1GA(9) M123A21BPC471(3)(10)
510.0
C1206Z511(3)1GA(9) M123A21BPC511(3)(10)
560.0
C1206Z561(3)1GA(9) M123A21BPC561(3)(10)
620.0
C1206Z621(3)1GA(9) M123A21BPC621(3)(10)
680.0
C1206Z681(3)1GA(9) M123A21BPC681(3)(10)
750.0
C1206Z751(3)1GA(9) M123A21BPC751(3)(10)
820.0
C1206Z821(3)1GA(9) M123A21BPC821(3)(10)
910.0
C1206Z911(3)1GA(9) M123A21BPC911(3)(10)
1000.0
C1206Z102(3)1GA(9) M123A21BPC102(3)(10)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50 VOLT-BP-C1206 SIZE (MILITARY CKS55)
1,100.0
C1206Z112(3)5GA(9) M123A21BPB112(3)(10)
1,200.0
C1206Z122(3)5GA(9) M123A21BPB122(3)(10)
1,300.0
C1206Z132(3)5GA(9) M123A21BPB132(3)(10)
1,500.0
C1206Z152(3)5GA(9) M123A21BPB152(3)(10)
1,600.0
C1206Z162(3)5GA(9) M123A21BPB162(3)(10)
1,800.0
C1206Z182(3)5GA(9) M123A21BPB182(3)(10)
2,000.0
C1206Z202(3)5GA(9) M123A21BPB202(3)(10)
2,200.0
C1206Z222(3)5GA(9) M123A21BPB222(3)(10)
100 VOLT-BX-C1206 SIZE (MILITARY CKS55)
4,700.0
C1206Z472(6)1XA(9) M123A21BXC472(6)(10)
5,600.0
C1206Z562(6)1XA(9) M123A21BXC562(6)(10)
6,800.0
C1206Z682(6)1XA(9) M123A21BXC682(6)(10)
8,200.0
C1206Z822(6)1XA(9) M123A21BXC822(6)(10)
10,000.0
C1206Z103(6)1XA(9) M123A21BXC103(6)(10)
12,000.0
C1206Z123(6)1XA(9) M123A21BXC123(6)(10)
15,000.0
C1206Z153(6)1XA(9) M123A21BXC153(6)(10)
50 VOLT-BX-C1206 SIZE (MILITARY CKS55)
18,000.0
C1206Z183(6)5XA(9) M123A21BXB183(6)(10)
22,000.0
C1206Z223(6)5XA(9) M123A21BXB223(6)(10)
27,000.0
C1206Z273(6)5XA(9) M123A21BXB273(6)(10)
33,000.0
C1206Z333(6)5XA(9) M123A21BXB333(6)(10)
39,000.0
C1206Z393(6)5XA(9) M123A21BXB393(6)(10)
100 VOLT-BP-C1812 SIZE (MILITARY CKS56)
1,200.0
C1812Z122(3)1GA(9) M123A22BPC122(3)(10)
2,200.0
C1812Z222(3)1GA(9) M123A22BPC222(3)(10)
2,400.0
C1812Z242(3)1GA(9) M123A22BPC242(3)(10)
2,700.0
C1812Z272(3)1GA(9) M123A22BPC272(3)(10)
3,000.0
C1812Z302(3)1GA(9) M123A22BPC302(3)(10)
3,300.0
C1812Z332(3)1GA(9) M123A22BPC332(3)(10)
3,600.0
C1812Z362(3)1GA(9) M123A22BPC362(3)(10)
3,900.0
C1812Z392(3)1GA(9) M123A22BPC392(3)(10)
4,300.0
C1812Z432(3)1GA(9) M123A22BPC432(3)(10)
4,700.0
C1812Z472(3)1GA(9) M123A22BPC472(3)(10)
50 VOLT-BP-C1812 SIZE (MILITARY CKS56)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT-BP-C1825 SIZE (MILITARY CKS57)
3,900.0
C1825Z392(3)1GA(9) M123A23BPC392(3)(10)
4,700.0
C1825Z472(3)1GA(9) M123A23BPC472(3)(10)
5,100.0
C1825Z512(3)1GA(9) M123A23BPC512(3)(10)
5,600.0
C1825Z562(3)1GA(9) M123A23BPC562(3)(10)
6,200.0
C1825Z622(3)1GA(9) M123A23BPC622(3)(10)
6,800.0
C1825Z682(3)1GA(9) M123A23BPC682(3)(10)
7,500.0
C1825Z752(3)1GA(9) M123A23BPC752(3)(10)
8,200.0
C1825Z822(3)1GA(9) M123A23BPC822(3)(10)
9,100.0
C1825Z912(3)1GA(9) M123A23BPC912(3)(10)
10,000.0
C1825Z103(3)1GA(9) M123A23BPC103(3)(10)
50 VOLT-BP-C1812 SIZE (MILITARY CKS57)
11,000.0
C1825Z113(3)5GA(9) M123A23BPB113(3)(10)
12,000.0
C1825Z123(3)5GA(9) M123A23BPB123(3)(10)
13,000.0
C1825Z133(3)5GA(9) M123A23BPB133(3)(10)
15,000.0
C1825Z153(3)5GA(9) M123A23BPB153(3)(10)
16,000.0
C1825Z163(3)5GA(9) M123A23BPB163(3)(10)
18,000.0
C1825Z183(3)5GA(9) M123A23BPB183(3)(10)
20,000.0
C1825Z203(3)5GA(9) M123A23BPB203(3)(10)
22,000.0
C1825Z223(3)5GA(9) M123A23BPB223(3)(10)
100 VOLT-BX-C1825 SIZE (MILITARY CKS57)
56,000.0
C1825Z563(6)1XA(9) M123A23BXC563(6)(10)
68,000.0
C1825Z683(6)1XA(9) M123A23BXC683(6)(10)
82,000.0
C1825Z823(6)1XA(9) M123A23BXC823(6)(10)
100,000.0
C1825Z104(6)1XA(9) M123A23BXC104(6)(10)
120,000.0
C1825Z124(6)1XA(9) M123A23BXC124(6)(10)
150,000.0
C1825Z154(6)1XA(9) M123A23BXC154(6)(10)
50 VOLT-BX-C1825 SIZE (MILITARY CKS57)
180,000.0
C1825Z184(6)5XA(9) M123A23BXB184(6)(10)
220,000.0
C1825Z224(6)5XA(9) M123A23BXB224(6)(10)
270,000.0
C1825Z274(6)5XA(9) M123A23BXB274(6)(10)
330,000.0
C1825Z334(6)5XA(9) M123A23BXB334(6)(10)
390,000.0
C1825Z394(6)5XA(9) M123A23BXB394(6)(10)
470,000.0
C1825Z474(6)5XA(9) M123A23BXB474(6)(10)
5,100.0
C1812Z512(3)5GA(9) M123A22BPB512(3)(10)
5,600.0
C1812Z562(3)5GA(9) M123A22BPB562(3)(10)
6,200.0
C1812Z622(3)5GA(9) M123A22BPB622(3)(10)
6,800.0
C1812Z682(3)5GA(9) M123A22BPB682(3)(10)
7,500.0
C1812Z752(3)5GA(9) M123A22BPB752(3)(10)
8,200.0
C1812Z822(3)5GA(9) M123A22BPB822(3)(10)
9,100.0
C1812Z912(3)5GA(9) M123A22BPB912(3)(10)
10,000.0
C1812Z103(3)5GA(9) M123A22BPB103(3)(10)
100 VOLT-BX-C1812 SIZE (MILITARY CKS56)
27,000.0
C1812Z273(6)1XA(9) M123A22BXC273(6)(10)
33,000.0
C1812Z333(6)1XA(9) M123A22BXC333(6)(10)
39,000.0
C1812Z393(6)1XA(9) M123A22BXC393(6)(10)
47,000.0
C1812Z473(6)1XA(9) M123A22BXC473(6)(10)
56,000.0
C1812Z563(6)1XA(9) M123A22BXC563(6)(10)
50 VOLT-BX-C1812 SIZE (MILITARY CKS56)
100,000.0
120,000.0
150,000.0
180,000.0
C1812Z104(6)5XA(9)
C1812Z124(6)5XA(9)
C1812Z154(6)5XA(9)
C1812Z184(6)5XA(9)
M123A22BXB104(6)(10)
M123A22BXB124(6)(10)
M123A22BXB154(6)(10)
M123A22BXB184(6)(10)
To complete the KEMET part numbers, insert the following tolerance:
(1)
C = ±0.25pF; D = ±0.5pF
(2)
C = ±0.25pF; J = ±5%; K = ±10%
(3)
F = ±1%; J = ±5%; K = ±10%
(4)
B = ±0.1pF; C = ±0.25pF
(5)
B = ±0.1pF; C = 0.25pF; D = 0.50pF
(6)
K = ±10%; M =±20%
To complete the KEMET part numbers, insert the following voltage:
(7)
B = 50 volts; C = 100 volts
(8)
5 = 50 volts; 1 = 100 volts
To complete the KEMET part numbers, insert termination designation:
(9)
H = Nickel Guarded, Solder Coated (Sn60); L = 70/30 Tin/Lead Plated
(10) S = Nickel Guarded, Solder Coated (Sn60); Z = 70/30 Tin/Lead Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
11
CERAMIC HIGH RELIABILITY
GENERAL INFORMATION GR900 SERIES
HIGH RELIABILITY — GR900 / Q-SPEC
GR900 capacitors are intended for use in any application where the
chance of failure must be reduced to the lowest possible level. While
any well-made multilayer ceramic capacitor is an inherently reliable
device, GR900 capacitors receive special attention in all phases of
manufacture including:
•
Raw Materials Selection
•
Clean Room Production
•
Individual Batch Testing
•
C-SAM (when applicable)
•
Singular Batch Identity is Maintained
•
Destructive Physical Analysis
•
These parts are well worth the added investment in comparison to the
cost of a device or system failure.
Typical applications include: Medical, Aerospace, Communication
Satellites, Radar and Guidance Systems.
4. Insulation Resistance: The 25°C measurement with rated
voltage applied shall be the lesser of 100 GΩ or 1000 Megohm Microfarads (100% of lot).
*5. Insulation Resistance: The 125°C measurement with rated
voltage applied shall be the lesser of 10 GΩ or 100 Megohm Microfarads (100% of lot). For chips, 125°C IR is performed prior to
Step 3 above.
6. Storage at 150°C for 2 hours minimum without voltage applied
followed by a 12-hour minimum stabilization period (temperature
characteristic BX only).
7. Capacitance: Shall be within specified tolerance at 25°C (100%
of lot). (Aging phenomenon is taken into account for BX dielectric
to obtain capacitance.)
8. Dissipation Factor: Shall not exceed 2.5% for X7R (BX)
dielectric, 0.15% for C0G (BP) dielectric at 25°C. (100% of lot.)
SCREENING AND SAMPLE TESTS
Each batch receives the following testing/inspections:
In Process Inspection (Per MIL-PRF-123):
1.
100% Visual Inspection.
2.
Destructive Physical Analysis: (DPA) - A sample is pulled from
each lot and examined per EIA-469 and KEMET’s strict internal
void and delamination criteria. Sampling plan is per MIL-PRF-123.
3.
C-SAM (GR900 / “A” in the fifth character position of the ordering
code): May be performed on batches failing to meet the DPA
criteria for removal of marginal product. Not required on each lot.
C-SAM (Q-SPEC / “Q” in the fifth character position of the ordering
code): Receive 100% C-SAM of lot prior to application of end
metallization.
Group A
1. Thermal Shock: Materials used in the construction of multilayer
ceramic capacitors possess various thermal coefficients of expansion.
To assure maximum uniformity, each part is temperature cycled in
accordance to MIL-STD-202, Method 107, Condition A with Step 3
being 125°C. Number of cycles shall be 20 (100% of lot).
2. Voltage Conditioning: One of the most strenuous environments for
any capacitor is the high temperature/high voltage test. All units are
subject to twice-rated voltage to the units at the maximum rated
temperature of 125°C for a minimum of 168 hours and a maximum of
264 hours. The voltage conditioning may be terminated at any time
during 168 hours to 264 hours time interval that confirmed failures meet
the requirements of the PDA during the last 48 hours of 1 unit or .4%
(100% of lot).
Optional Voltage Conditioning (Accelerated Voltage
Conditioning): All conditions of the standard voltage conditioning
apply with the exception of increased voltage and decreased test time.
Refer to MIL-PRF-123 for the proper formula.
*Step 5 is performed on chips at this point (100% of lot).
3. Dielectric Withstanding Voltage: 250% of the DC rated voltage at
25°C (100% of lot).
12
9. Percent Defective Allowable (PDA): The overall PDA is 8% for
parts outside the MIL-PRF-123 values. The PDA is per MIL-PRF123 for all parts that are valid MIL-PRF-123 values. The PD
includes steps 1 through 8 above with the following exceptions.
Capacitance exclusion - capacitance values no more than 5% or
.5pF, whichever is greater for BX characteristic or 1% or .3pF,
whichever is greater for BP characteristic beyond specified
tolerance limit, shall be removed from the lot but shall not be
considered defective for determination of the PD.
Insulation Resistance at 25°C — Product which is not acceptable
for twice the military limit but is acceptable per the military limit, is
removed from the lot but shall not be considered defective for
determination of the PD.
10. Visual and Mechanical Examination: Performed per MILPRF-123 criteria.
11. Radiographic Examination (Leaded Devices Only): Radial
devices receive a one-plane X-ray.
12. Destructive Physical Analysis (DPA): A sample is examined
on each lot per EIA-469. Sampling Plan is per MIL-PRF-123.
STANDARD PACKAGING
All products are packaged in trays except C512 capacitors which
are packaged 1 piece per bag.
*Note: All packaging is ESD protected.
DATA PACKAGE
A data package is sent with each shipment which contains:
1. Final Destructive Physical Analysis (DPA) report.
2. Certificate of Compliance stating that the parts meet all
applicable requirements of the appropriate military specification to
the best failure level to which KEMET is approved.
3. Summary of Group A Testing.
Group B
MIL-PRF-123 Group B testing is available with special order.
Please contact KEMET for additional information and ordering
details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/RADIAL — HIGH RELIABILITY GR900 SERIES
CAPACITOR OUTLINE DRAWINGS
C 052 B 223 K 1 X 5 C A
FAILURE RATE
MONOLITHIC
CERAMIC
CAPACITORS
PHYSICAL DIMENSIONS
A—Standard — Not Applicable
LEAD MATERIAL
(See above)
C — Standard —
Radial: solder coated copper
HI REL SPECIFICATIONS
APPLY:
INTERNAL CONSTRUCTION
5— Standard
B—Leaded devices
TEMPERATURE
CHARACTERISTICS
CAPACITANCE PICOFARAD CODE
First two digits are significant figures of capacitance value and third
digit is the number of zeros to follow in stating capacitance in picofarads. For example, “223” is 22,000 pF. The third-digit number “9”
indicates a divisor of 10; for example, “229” is 2.2 pF.
(See table below)
RATED VOLTAGE
1 — 100
2 — 200
5 — 50
CAPACITANCE TOLERANCE
M — ±20%
K — ±10%
J — ±5%
G — ±2% (G(BP) Temperature Characteristic Only)
F — ±1% (G(BP) Temperature Characteristic Only)
*D—±0.5 pF (G(BP) Temperature Characteristic Only)
*C—±0.25 pF (G(BP) Temperature Characteristic Only)
*These tolerances available only
for 1.0 through 9.1 pF capacitors.
TEMPERATURE CHARACTERISTICS CAPACITANCE CHANGE WITH TEMPERATURE -55° TO +125°C
PART NUMBER
LETTER
WITHOUT D.C.
BIAS
WITH RATED D.C.
VOLTAGE APPLIED
EIA
G
X
±30ppm/°C
±15%
±30ppm/°C
+15%, -25%
COG
X7R
OTHER NOMENCLATURE
MILITARY
CG,BP
BX
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
COMMON
NPO
—
13
CERAMIC MOLDED/RADIAL — HIGH RELIABILITY
GR900 SERIES (BP DIELECTRIC)
CAPACITOR MARKINGS
Size (C052 or C062) as applicable
KEMET
C512BG
C052
K= KEMET, B = GR900 Spec,
Temperature Characteristic,
(G = C0G, X = X7R)
KB G
Capacitance Code, Tolerance
101J
200V
— Voltage
XXXX
— Date Code
**
— Lot Code
104J
100V
— KEMET
— Size, B = GR900, Temperature
Characteristic (G = C0G, X = X7R)
— Capacitance Code, Tolerance
— Voltage
XXXX**
— Date Code & Lot Code
RATINGS & PART NUMBER REFERENCE
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT - BP - STYLE C052
1.0
1.1
1.2
1.5
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
C052B109(1)2G5CA
C052B119(1)2G5CA
C052B129(1)2G5CA
C052B159(1)2G5CA
C052B189(1)2G5CA
C052B209(1)2G5CA
C052B229(1)2G5CA
C052B249(1)2G5CA
C052B279(1)2G5CA
C052B309(1)2G5CA
C052B339(1)2G5CA
C052B369(1)2G5CA
C052B399(1)2G5CA
C052B439(1)2G5CA
C052B479(1)2G5CA
C052B519(1)2G5CA
C052B569(1)2G5CA
C052B629(1)2G5CA
C052B689(1)2G5CA
C052B759(1)2G5CA
C052B829(1)2G5CA
C052B919(1)2G5CA
C052B100(1)2G5CA
C052B110(1)2G5CA
C052B120(1)2G5CA
C052B130(1)2G5CA
C052B150(1)2G5CA
C052B160(1)2G5CA
C052B180(1)2G5CA
C052B200(1)2G5CA
C052B220(1)2G5CA
C052B240(1)2G5CA
C052B270(1)2G5CA
C052B300(1)2G5CA
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT - BP - STYLE C052 (Cont’d)
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
68.0
75.0
82.0
91.0
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
C052B330(1)2G5CA
C052B360(1)2G5CA
C052B390(1)2G5CA
C052B430(1)2G5CA
C052B470(1)2G5CA
C052B510(1)2G5CA
C052B560(1)2G5CA
C052B620(1)2G5CA
C052B680(1)2G5CA
C052B750(1)2G5CA
C052B820(1)2G5CA
C052B910(1)2G5CA
C052B101(1)2G5CA
C052B111(1)2G5CA
C0528121(1)2G5CA
C0528131(1)2G5CA
C052B151(1)2G5CA
C052B161(1)2G5CA
C052B181(1)2G5CA
C052B201(1)2G5CA
C052B221(1)2G5CA
C052B241(1)2G5CA
C052B271(1)2G5CA
C0528301(1)2G5CA
C052B331(1)2G5CA
C0528361(1)2G5CA
C052B391(1)2G5CA
C052B431(1)2G5CA
C052B471(1)2G5CA
C052B511(1)2G5CA
C052B561(1)2G5CA
C052B621(1)2G5CA
C052B681(1)2G5CA
C052B751(1)2G5CA
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on
page 13
BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0 thru 9.1pF
only) TEMPERATURE CHARACTERISTIC “G”
BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X”
(2) Capacitance values shown above are standard. Other capacitance values are available upon request.
14
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/RADIAL — HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS & PART NUMBER REFERENCE
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT - BP - STYLE C052 (Cont’d)
820
910
1000
1100
1200
1300
1500
C052B821(1)2G5CA
C052B911(1)2G5CA
C052B102(1)2G5CA
C052B112(1)2G5CA
C052B122(1)2G5CA
C052B132(1)2G5CA
C052B152(1)2G5CA
100 VOLT - BP - STYLE C052
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5100
5600
C052B162(1)1G5CA
C052B182(1)1G5CA
C052B202(1)1G5CA
C052B222(1)1G5CA
C052B242(1)1G5CA
C052B272(1)1G5CA
C052B302(1)1G5CA
C052B332(1)1G5CA
C052B362(1)1G5CA
C052B392(1)1G5CA
C052B432(1)1G5CA
C052B472(1)1G5CA
C052B512(1)1G5CA
C052B562(1)1G5CA
50 VOLT - BP - STYLE C052
6200
6800
C052B622(1)5G5CA
C052B682(1)5G5CA
200 VOLT - BX - STYLE C052
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10,000
12,000
15,000
C052B471(1)2X5CA
C052B561(1)2X5CA
C052B681(1)2X5CA
C052B821(1)2X5CA
C052B102(1)2X5CA
C052B122(1)2X5CA
C052B152(1)2X5CA
C052B182(1)2X5CA
C052B222(1)2X5CA
C052B272(1)2X5CA
C052B332(1)2X5CA
C052B392(1)2X5CA
C052B472(1)2X5CA
C052B562(1)2X5CA
C052B682(1)2X5CA
C052B822(1)2X5CA
C052B103(1)2X5CA
C052B123(1)2X5CA
C052B153(1)2X5CA
100 VOLT - BX - STYLE C052
18,000
22,000
27,000
33,000
39,000
47,000
C052B183(1)1X5CA
C052B223(1)1X5CA
C052B273(1)1X5CA
C052B333(1)1X5CA
C052B393(1)1X5CA
C052B473(1)1X5CA
50 VOLT - BX - STYLE C052
56,000
68,000
82,000
100,000
120,000
150,000
C052B563(1)5X5CA
C052B683(1)5X5CA
C052B823(1)5X5CA
C052B104(1)5X5CA
C052B124(1)5X5CA
C052B154(1)5X5CA
200 VOLT - BP - STYLE C062
270
330
360
390
C062B271(1)2G5CA
C062B331(1)2G5CA
C062B361(1)2G5CA
C062B391(1)2G5CA
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT - BP - STYLE C062 (Cont’d)
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4700
5100
5600
6200
6800
C062B431(1)2G5CA
C062B471(1)2G5CA
C062B511(1)2G5CA
C062B561(1)2G5CA
C062B621(1)2G5CA
C062B681(1)2G5CA
C062B751(1)2G5CA
C062B821(1)2G5CA
C062B911(1)2G5CA
C062B102(1)2G5CA
C062B112(1)2G5CA
C062B122(1)2G5CA
C062B132(1)2G5CA
C062B152(1)2G5CA
C062B162(1)2G5CA
C062B182(1)2G5CA
C062B202(1)2G5CA
C062B222(1)2G5CA
C062B242(1)2G5CA
C062B272(1)2G5CA
C062B302(1)2G5CA
C062B332(1)2G5CA
C062B362(1)2G5CA
C062B392(1)2G5CA
C062B472(1)2G5CA
C062B512(1)2G5CA
C062B562(1)2G5CA
C062B622(1)2G5CA
C062B682(1)2G5CA
100 VOLT - BP - STYLE C062
7500
8200
9100
10,000
11,000
12,000
13,000
15,000
16,000
18,000
20,000
22,000
24,000
C062B752(1)1G5CA
C062B822(1)1G5CA
C062B912(1)1G5CA
C062B103(1)1G5CA
C062B113(1)1G5CA
C062B123(1)1G5CA
C062B133(1)1G5CA
C062B153(1)1G5CA
C062B163(1)1G5CA
C062B183(1)1G5CA
C062B203(1)1G5CA
C062B223(1)1G5CA
C062B243(1)1G5CA
200 VOLT - BX - STYLE C062
3300
3900
4700
5600
6800
8200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
C062B332(1)2X5CA
C062B392(1)2X5CA
C062B472(1)2X5CA
C062B562(1)2X5CA
C062B682(1)2X5CA
C062B822(1)2X5CA
C062B103(1)2X5CA
C062B123(1)2X5CA
C062B153(1)2X5CA
C062B183(1)2X5CA
C062B223(1)2X5CA
C062B273(1)2X5CA
C062B333(1)2X5CA
C062B393(1)2X5CA
C062B473(1)2X5CA
C062B563(1)2X5CA
C062B683(1)2X5CA
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on
page 13. BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0
thru 9.1pF only) TEMPERATURE CHARACTERISTIC “G” BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X” (2) Capacitance values shown above are standard. Other capacitance values are
available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
15
CERAMIC MOLDED/RADIAL — HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS & PART NUMBER REFERENCE
CAPACITANCE
pF
KEMET
PART NUMBER
100 VOLT - BX - STYLE C062
82,000
100,000
120,000
150,000
180,000
220,000
C062B823(1)1X5CA
C062B104(1)1X5CA
C062B124(1)1X5CA
C062B154(1)1X5CA
C062B184(1)1X5CA
C062B224(1)1X5CA
50 VOLT - BX - STYLE C062
270,000
330,000
390,000
470,000
560,000
680,000
820,000
1,000,000
C062B274(1)5X5CA
C062B334(1)5X5CA
C062B394(1)5X5CA
C062B474(1)5X5CA
C062B564(1)5X5CA
C062B684(1)5X5CA
C062B824(1)5X5CA
C062B105(1)5X5CA
200 VOLT - BP- STYLE C512
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5600
6800
8200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
C512B202(1)2G5CA
C512B222(1)2G5CA
C512B242(1)2G5CA
C512B272(1)2G5CA
C512B302(1)2G5CA
C512B332(1)2G5CA
C512B362(1)2G5CA
C512B392(1)2G5CA
C512B432(1)2G5CA
C512B472(1)2G5CA
C512B562(1)2G5CA
C512B682(1)2G5CA
C512B822(1)2G5CA
C512B103(1)2G5CA
C512B123(1)2G5CA
C512B153(1)2G5CA
C512B183(1)2G5CA
C512B223(1)2G5CA
C512B273(1)2G5CA
C512B333(1)2G5CA
CAPACITANCE
pF
KEMET
PART NUMBER
50 VOLT - BP- STYLE C512
120,000
150,000
C512B124(1)5G5CA
C512B154(1)5G5CA
200 VOLT - BX - STYLE C512
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
C512B393(1)2X5CA
C512B473(1)2X5CA
C512B563(1)2X5CA
C512B683(1)2X5CA
C512B823(1)2X5CA
C512B104(1)2X5CA
C512B124(1)2X5CA
C512B154(1)2X5CA
C512B184(1)2X5CA
C512B224(1)2X5CA
C512B274(1)2X5CA
C512B334(1)2X5CA
C512B394(1)2X5CA
100 VOLT - BX - STYLE C512
470,000
560,000
680,000
820,000
1,000,000
C512B474(1)1X5CA
C512B564(1)1X5CA
C512B684(1)1X5CA
C512B824(1)1X5CA
C512B105(1)1X5CA
50 VOLT - BX - STYLE C512
1,200,000
1,500,000
2,000,000
2,200,000
3,300,000
C512B125(1)5X5CA
C512B155(1)5X5CA
C512B205(1)5X5CA
C512B225(1)5X5CA
C512B335(1)5X5CA
100 VOLT - BP- STYLE C512
39,000
47,000
56,000
68,000
82,000
100,000
C512B393(1)1G5CA
C512B473(1)1G5CA
C512B563(1)1G5CA
C512B683(1)1G5CA
C512B823(1)1G5CA
C512B104(1)1G5CA
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on
page 13.
BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0 thru 9.1pF
only) TEMPERATURE CHARACTERISTIC “G”
BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X”
(2) Capacitance values shown above are standard. Other capacitance values are available upon request.
16
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
CAPACITOR OUTLINE DRAWINGS
*Add .38mm (.015”) to the positive width and thickness tolerance dimensions and 0.64mm (.025”) to the positive length tolerance dimension for solder coated(dipped) end metallization. DIMENSIONS — MILLIMETERS (INCHES)
Size
Code
0504
0805
1005
1206
1210
1805
1808
1812
1825
2225
L
W
Length
Width
1.269 (.050) ± 0.254 (.010) 1.015 (.040) ± 0.254 (.010)
2.03 (.080) ± 0.38 (.015) 1.27 (.050) ± 0.38 (.015)
2.56 (.100) ± 0.38 (.015) 1.27 (.050) ± 0.38 (.015)
3.07 (.120) ± 0.38 (.015) 1.52 (.060) ± 0.38 (.015)
3.07 (.120) ± 0.38 (.015) 2.56 (.100) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 1.27 (.050) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 2.03 (.080) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 3.18 (.125) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 6.35 (.250) ± 0.38 (.015)
5.59 (.220) ± 0.38 (.015) 6.35 (.250) ± 0.38 (.015)
T
Thickness
Max.
1.142 (.045)
1.4 (.055)
1.5 (.059)
1.6 (.065)
1.6 (.065)
1.4 (.055)
1.6 (.065)
2.03 (.080)
2.03 (.080)
2.03 (.080)
ORDERING INFORMATION
C 0805 A 103 K 5 X A C
CERAMIC
SIZE CODE
See table above
SPECIFICATION
END METALLIZATION
C—100% Tin(Sn) Plated
H—60/40 SnPb Coated (Dipped)
L—70/30 SnPb Plated
G—Gold Plated
A — KEMET GR900 (CHIPS); Q — KEMET Q-SPEC
CAPACITANCE CODE
Expressed in Picofarads (pF)
First two digit-significant figures.
Third digit-number of zeros. (Use 9 for 1.0 thru 9.9 pF.
Example: 2.2 pF — 229).
FAILURE RATE LEVEL
(%/1,000 HOURS)
A—Standard—Not applicable
CAPACITANCE TOLERANCE
M — ±20%
K — ±10%
J — ±5%
G — ±2% (G(BP) Temperature Characteristic Only)
F — ±1% (G(BP) Temperature Characteristic Only)
*D — ±0.5 pF (G(BP) Temperature Characteristic Only)
*C — ±0.25 pF (G(BP) Temperature Characteristic Only)
*These tolera nces available only for 1.0 through 10 pF capacitors. Designated by Capacitance Change over
Temperature Range
G—BP (±30 PPM/°C)
X—BX (±15%, -55 +125°C)( +15%, -25% @ rated Vdc)
*BX dielectric is a suitable substitute for BR (X7R) dielectric* BR Dielectric (±15%, ‐55 +125°C / +15%, ‐40% @ rated Vdc) MARKING
Capacitors shall be legibly laser marked in contrasting color with the KEMET trademark and 2-digit capacitance symbol.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
17
VOLTAGE
1—100V
2—200V
5—50V
TEMPERATURE CHARACTERISTIC
3—25V
4—16V
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C1005
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
1.0
1.1
1.2
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
75.0
82.0
91.0
100
110
120
130
150
160
C1005A109(1)2GA(2)
C1005A119(1)2GA(2)
C1005A129(1)2GA(2)
C1005A159(1)2GA(2)
C1005A169(1)2GA(2)
C1005A189(1)2GA(2)
C1005A209(1)2GA(2)
C1005A229(1)2GA(2)
C1005A249(1)2GA(2)
C1005A279(1)2GA(2)
C1005A309(1)2GA(2)
C1005A339(1)2GA(2)
C1005A369(1)2GA(2)
C1005A399(1)2GA(2)
C1005A439(1)2GA(2)
C1005A479(1)2GA(2)
C1005A519(1)2GA(2)
C1005A569(1)2GA(2)
C1005A689(1)2GA(2)
C1005A759(1)2GA(2)
C1005A829(1)2GA(2)
C1005A919(1)2GA(2)
C1005A100(1)2GA(2)
C1005A110(1)2GA(2)
C1005A120(1)2GA(2)
C1005A130(1)2GA(2)
C1005A150(1)2GA(2)
C1005A160(1)2GA(2)
C1005A180(1)2GA(2)
C1005A200(1)2GA(2)
C1005A220(1)2GA(2)
C1005A240(1)2GA(2)
C1005A270(1)2GA(2)
C1005A300(1)2GA(2)
C1005A330(1)2GA(2)
C1005A360(1)2GA(2)
C1005A390(1)2GA(2)
C1005A430(1)2GA(2)
C1005A470(1)2GA(2)
C1005A510(1)2GA(2)
C1005A560(1)2GA(2)
C1005A620(1)2GA(2)
C1005A750(1)2GA(2)
C1005A820(1)2GA(2)
C1005A910(1)2GA(2)
C1005A101(1)2GA(2)
C1005A111(1)2GA(2)
C1005A121(1)2GA(2)
C1005A131(1)2GA(2)
C1005A151(1)2GA(2)
C1005A161(1)2GA(2)
KEMET
PART NUMBER
200 VOLT - BP
180
200
220
240
270
300
330
360
390
430
470
C1005A181(1)2GA(2)
C1005A201(1)2GA(2)
C1005A221(1)2GA(2)
C1005A241(1)2GA(2)
C1005A271(1)2GA(2)
C1005A301(1)2GA(2)
C1005A331(1)2GA(2)
C1005A361(1)2GA(2)
C1005A391(1)2GA(2)
C1005A431(1)2GA(2)
C1005A471(1)2GA(2)
100 VOLT - BP
510
560
620
680
750
820
C1005A511(1)1GA(2)
C1005A561(1)1GA(2)
C1005A621(1)1GA(2)
C1005A681(1)1GA(2)
C1005A751(1)1GA(2)
C1005A821(1)1GA(2)
50 VOLT - BP
910
1000
1100
1200
C1005A911(1)5GA(2)
C1005A102(1)5GA(2)
C1005A112(1)5GA(2)
C1005A122(1)5GA(2)
200 VOLT - BX
330
390
470
560
680
820
1000
1200
1500
1800
C1005A331(1)2XA(2)
C1005A391(1)2XA(2)
C1005A471(1)2XA(2)
C1005A561(1)2XA(2)
C1005A681(1)2XA(2)
C1005A821(1)2XA(2)
C1005A102(1)2XA(2)
C1005A122(1)2XA(2)
C1005A152(1)2XA(2)
C1005A182(1)2XA(2)
100 VOLT - BX
2200
2700
3300
3900
4700
5600
6800
8200
10,000
C1005A222(1)1XA(2)
C1005A272(1)1XA(2)
C1005A332(1)1XA(2)
C1005A392(1)1XA(2)
C1005A472(1)1XA(2)
C1005A562(1)1XA(2)
C1005A682(1)1XA(2)
C1005A822(1)1XA(2)
C1005A103(1)1XA(2)
50 VOLT - BX
12,000
15,000
18,000
22,000
C1005A123(1)5XA(2)
C1005A153(1)5XA(2)
C1005A183(1)5XA(2)
C1005A223(1)5XA(2)
RATINGS AND PART NUMBER REFERENCE
STYLE C1206
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
C1206A100(1)2GA(2)
C1206A110(1)2GA(2)
C1206A120(1)2GA(2)
C1206A130(1)2GA(2)
C1206A150(1)2GA(2)
C1206A160(1)2GA(2)
C1206A180(1)2GA(2)
C1206A200(1)2GA(2)
C1206A220(1)2GA(2)
C1206A240(1)2GA(2)
KEMET
PART NUMBER
200 VOLT - BP
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
C1206A270(1)2GA(2)
C1206A300(1)2GA(2)
C1206A330(1)2GA(2)
C1206A360(1)2GA(2)
C1206A390(1)2GA(2)
C1206A430(1)2GA(2)
C1206A470(1)2GA(2)
C1206A510(1)2GA(2)
C1206A560(1)2GA(2)
C1206A620(1)2GA(2)
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on page 17.
BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0 thru 10pF only) TEMPERATURE CHARACTERISTIC “G”
BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X”
(2) Complete part number by inserting end Metallization, as applicable as shown in ordering information on page 17.
C—Tin-Coated, Final (SolderGuard II) H—Solder-Coated, Final (SolderGuard I) L—70/30 Tin Lead Plated G—Gold Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
19
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C1808
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
C1808A331(1)2GA(2)
C1808A361(1)2GA(2)
C1808A391(1)2GA(2)
C1808A431(1)2GA(2)
C1808A471(1)2GA(2)
C1808A511(1)2GA(2)
C1808A561(1)2GA(2)
C1808A621(1)2GA(2)
C1808A681(1)2GA(2)
C1808A751(1)2GA(2)
C1808A821(1)2GA(2)
C1808A911(1)2GA(2)
C1808A102(1)2GA(2)
C1808A112(1)2GA(2)
C1808A122(1)2GA(2)
C1808A132(1)2GA(2)
C1808A152(1)2GA(2)
100 VOLT - BP
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
C1808A162(1)1GA(2)
C1808A182(1)1GA(2)
C1808A202(1)1GA(2)
C1808A222(1)1GA(2)
C1808A242(1)1GA(2)
C1808A272(1)1GA(2)
C1808A302(1)1GA(2)
C1808A332(1)1GA(2)
C1808A362(1)1GA(2)
C1808A392(1)1GA(2)
C1808A432(1)1GA(2)
C1808A472(1)1GA(2)
KEMET
PART NUMBER
50 VOLT - BP
5100
5600
C1808A512(1)5GA(2)
C1808A562(1)5GA(2)
200 VOLT - BX
2200
2700
3300
3900
4700
5600
6800
8200
10,000
C1808A222(1)2XA(2)
C1808A272(1)2XA(2)
C1808A332(1)2XA(2)
C1808A392(1)2XA(2)
C1808A472(1)2XA(2)
C1808A562(1)2XA(2)
C1808A682(1)2XA(2)
C1808A822(1)2XA(2)
C1808A103(1)2XA(2)
100 VOLT - BX
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
C1808A123(1)1XA(2)
C1808A153(1)1XA(2)
C1808A183(1)1XA(2)
C1808A223(1)1XA(2)
C1808A273(1)1XA(2)
C1808A333(1)1XA(2)
C1808A393(1)1XA(2)
C1808A473(1)1XA(2)
50 VOLT - BX
39,000
47,000
56,000
68,000
82,000
100,000
C1808A393(1)5XA(2)
C1808A473(1)5XA(2)
C1808A563(1)5XA(2)
C1808A683(1)5XA(2)
C1808A823(1)5XA(2)
C1808A104(1)5XA(2)
RATINGS AND PART NUMBER REFERENCE
STYLE C1812
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
C1812A331(1)2GA(2)
C1812A361(1)2GA(2)
C1812A391(1)2GA(2)
C1812A431(1)2GA(2)
C1812A471(1)2GA(2)
C1812A511(1)2GA(2)
C1812A561(1)2GA(2)
C1812A621(1)2GA(2)
C1812A681(1)2GA(2)
C1812A751(1)2GA(2)
C1812A821(1)2GA(2)
C1812A911(1)2GA(2)
C1812A102(1)2GA(2)
C1812A112(1)2GA(2)
C1812A122(1)2GA(2)
C1812A132(1)2GA(2)
C1812A152(1)2GA(2)
C1812A162(1)2GA(2)
C1812A182(1)2GA(2)
C1812A202(1)2GA(2)
C1812A222(1)2GA(2)
C1812A242(1)2GA(2)
C1812A272(1)2GA(2)
100 VOLT - BP
3000
3300
3600
3900
4300
4700
5100
22
C1812A302(1)1GA(2)
C1812A332(1)1GA(2)
C1812A362(1)1GA(2)
C1812A392(1)1GA(2)
C1812A432(1)1GA(2)
C1812A472(1)1GA(2)
C1812A512(1)1GA(2)
KEMET
PART NUMBER
100 VOLT - BP
5600
6200
6800
C1812A562(1)1GA(2)
C1812A622(1)1GA(2)
C1812A682(1)1GA(2)
50 VOLT - BP
7500
8200
9100
10,000
C1812A752(1)5GA(2)
C1812A822(1)5GA(2)
C1812A912(1)5GA(2)
C1812A103(1)5GA(2)
200 VOLT - BX
6800
8200
10,000
12,000
15,000
18,000
C1812A682(1)2XA(2)
C1812A822(1)2XA(2)
C1812A103(1)2XA(2)
C1812A123(1)2XA(2)
C1812A153(1)2XA(2)
C1812A183(1)2XA(2)
100 VOLT - BX
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
C1812A223(1)1XA(2)
C1812A273(1)1XA(2)
C1812A333(1)1XA(2)
C1812A393(1)1XA(2)
C1812A473(1)1XA(2)
C1812A563(1)1XA(2)
C1812A683(1)1XA(2)
C1812A823(1)1XA(2)
50 VOLT - BX
82,000
100,000
120,000
150,000
180,000
C1812A823(1)5XA(2)
C1812A104(1)5XA(2)
C1812A124(1)5XA(2)
C1812A154(1)5XA(2)
C1812A184(1)5XA(2)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C1825
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
2700
3000
3300
3600
3900
4300
4700
5100
5600
C1825A272(1)2GA(2)
C1825A302(1)2GA(2)
C1825A332(1)2GA(2)
C1825A362(1)2GA(2)
C1825A392(1)2GA(2)
C1825A432(1)2GA(2)
C1825A472(1)2GA(2)
C1825A512(1)2GA(2)
C1825A562(1)2GA(2)
100 VOLT - BP
6200
6800
7500
8200
9100
10,000
11,000
12,000
13,000
15,000
16,000
18,000
C1825A622(1)1GA(2)
C1825A682(1)1GA(2)
C1825A752(1)1GA(2)
C1825A822(1)1GA(2)
C1825A912(1)1GA(2)
C1825A103(1)1GA(2)
C1825A113(1)1GA(2)
C1825A123(1)1GA(2)
C1825A133(1)1GA(2)
C1825A153(1)1GA(2)
C1825A163(1)1GA(2)
C1825A183(1)1GA(2)
50 VOLT - BP
20,000
22,000
KEMET
PART NUMBER
200 VOLT - BX
10,000
12,000
15,000
18,000
22,000
33,000
39,000
47,000
C1825A103(1)2XA(2)
C1825A123(1)2XA(2)
C1825A153(1)2XA(2)
C1825A183(1)2XA(2)
C1825A223(1)2XA(2)
C1825A333(1)2XA(2)
C1825A393(1)2XA(2)
C1825A473(1)2XA(2)
100 VOLT - BX
56,000
68,000
82,000
100,000
120,000
150,000
180,000
C1825A563(1)1XA(2)
C1825A683(1)1XA(2)
C1825A823(1)1XA(2)
C1825A104(1)1XA(2)
C1825A124(1)1XA(2)
C1825A154(1)1XA(2)
C1825A184(1)1XA(2)
50 VOLT - BX
180,000
220,000
270,000
330,000
390,000
470,000
C1825A184(1)5XA(2)
C1825A224(1)5XA(2)
C1825A274(1)5XA(2)
C1825A334(1)5XA(2)
C1825A394(1)5XA(2)
C1825A474(1)5XA(2)
C1825A203(1)5GA(2)
C1825A223(1)5GA(2)
RATINGS AND PART NUMBER REFERENCE
STYLE C2225
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
2700
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
C2225A272(1)2GA(2)
C2225A302(1)2GA(2)
C2225A332(1)2GA(2)
C2225A362(1)2GA(2)
C2225A392(1)2GA(2)
C2225A432(1)2GA(2)
C2225A472(1)2GA(2)
C2225A512(1)2GA(2)
C2225A562(1)2GA(2)
C2225A622(1)2GA(2)
C2225A682(1)2GA(2)
C2225A752(1)2GA(2)
C2225A822(1)2GA(2)
100 VOLT - BP
9100
10,000
11,000
12,000
13,000
15,000
16,000
18,000
20,000
22,000
C2225A912(1)1GA(2)
C2225A103(1)1GA(2)
C2225A113(1)1GA(2)
C2225A123(1)1GA(2)
C2225A133(1)1GA(2)
C2225A153(1)1GA(2)
C2225A163(1)1GA(2)
C2225A183(1)1GA(2)
C2225A203(1)1GA(2)
C2225A223(1)1GA(2)
50 VOLT - BP
24,000
27,000
33,000
KEMET
PART NUMBER
200 VOLT - BX
18,000
22,000
27,000
33,000
39,000
47,000
C2225A183(1)2XA(2)
C2225A223(1)2XA(2)
C2225A273(1)2XA(2)
C2225A333(1)2XA(2)
C2225A393(1)2XA(2)
C2225A473(1)2XA(2)
100 VOLT - BX
56,000
68,000
82,000
100,000
120,000
150,000
180,000
C2225A563(1)1XA(2)
C2225A683(1)1XA(2)
C2225A823(1)1XA(2)
C2225A104(1)1XA(2)
C2225A124(1)1XA(2)
C2225A154(1)1XA(2)
C2225A184(1)1XA(2)
50 VOLT - BX
220,000
270,000
330,000
390,000
470,000
560,000
680,000
820,000
1,000,000
C2225A224(1)5XA(2)
C2225A274(1)5XA(2)
C2225A334(1)5XA(2)
C2225A394(1)5XA(2)
C2225A474(1)5XA(2)
C2225A564(1)5XA(2)
C2225A684(1)5XA(2)
C2225A824(1)5XA(2)
C2225A105(1)5XA(2)
C2225A243(1)5GA(2)
C2225A273(1)5GA(2)
C2225A333(1)5GA(2)
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on
page 17. BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0
thru 10pF only) TEMPERATURE CHARACTERISTIC “G” BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X”
(2) Complete part number by inserting end Metallization, as applicable as shown in ordering information on page 17.
C—Tin-Coated, Final (SolderGuard II)
H—Solder-Coated, Final (SolderGuard I)
L—70/30 Tin/Lead Plated
G—Gold Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
23
World Sales Headquarters
KEMET Electronics Corporation
P.O. Box 5928
Greenville, SC 29606
Phone: 864-963-6300
Europe
KEMET Electronics S.A.
15bis Chemin des Mines
CH-1202 Geneva,
Switzerland
Phone: 41-22-715-0100
Asia
KEMET Electronics Marketing PTE Ltd.
101 Thomson Road, #23-03
United Square
Singapore, 307591, Singapore
Phone: 65-6353-6636
KEMET Electronics Asia Ltd.
30 Canton Road, Room 1512
SilverCord Tower II
Tsimshatshui, Kowloon
Hong Kong
Phone: 852-2305-1168
KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume
any responsibility for infringement that might result from the use of KEMET capacitors in potential circuit designs.
KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com