Ceramic High Reliability Capacitors

F-3113 5/06
CERAMIC HIGH RELIABILITY CAPACITORS
Ceramic High Reliability
Capacitors
KEMET Series
MIL-PRF-123 Performance Information
MIL-PRF-123/01/02/03
C0805Z/C1206/C1210Z/
C1808Z/C1812Z/C1825Z/C2225Z
GR900 Performance Information
4-7
4, 8-11
12
GR900 High Reliability Radial
C052B/C062B/C512B
13-16
GR900 High Reliability Chips
C0805A/C1005A/C1206A/
C1210A/C1805A/C1808A/
C1812A/C1825A/C2225
17-23
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC
HIGH RELIABILITY
MIL-PRF-123/10/11/12/13/
21/22/23
C052Z/C062Z/C512Z
Page
1-3
CERAMIC HIGH RELIABILITY CAPACITORS
CERAMIC HIGH RELIABILITY PRODUCTS
Ceramic Chips, Radial Molded
KEMET Electronics Corporation has been known for
many years as the leader in the ceramic high reliability products. KEMET produces high reliability
monolithic ceramic capacitors under tightly-controlled manufacturing procedures. These capacitors
achieve “State of the Art” performance by virtue of
careful materials selection, conservative design
rules, motivational training of employees, and
scrupulous inspection of all processes as well as the
finished product. KEMET not only manufactures its
own high reliability ceramic capacitor (GR900),
KEMET also manufactures MIL-PRF-123 product
which is built to the highest military standard in the
industry today.
BASIC REQUIREMENTS FOR KEMET’S
HIGH RELIABILITY
PRODUCTS ARE AS FOLLOWS:
1. Selected Raw Materials: All raw materials are
selected for characteristics known to produce the
finest quality capacitors exhibiting the best electrical
parameters and physical integrity. Materials traceability is maintained throughout the manufacturing
process.
2. Batch Homogeneity: Production is under batch
control. Each batch is homogeneous with respect to
materials, design and processing conditions.
3. Clean Room Processing: All processes sensitive
to particulate contamination take place in a clean
room environment.
4. Special Designs: Special design considerations
such as dielectric thickness are strictly enforced.
Only COG (BP) and X7R (BX) temperature characteristics are made.
5. Destructive Physical Analysis (DPA, or
Cross-Sectioning): All batches are sampled using
EIA-469 as a minimum requirement. The samples
remain on file and DPA Reports are shipped with the
capacitors.
6. Ultrasonic Scanning: Optional 100% screening
may be performed using ultrasonic waves to detect
voids or delaminations. Screened lots must pass a
final sample DPA.
7. Batch Performance Monitoring: All production
batches are tested to generate electrical characteristics. Batches which show anomalous characteristics
are rejected.
8. Special Customer Requirements: Many special
requirements such as serialization, DPA samples,
X-Ray plates, and special packaging can be accommodated.
9. Document Applicable: The high reliability product is implemented through various internal documents under revision control. The Manufacturing
Instructions provide detailed descriptions of all operations and delineate requirements for process control and product performance at various points in the
process flow. Inspector Operating Documents
describe test procedures and sampling plans for
inspection of raw materials, in-process material and
finished product. Raw material specifications
describe physical and chemical characteristics as
well as the packaging and labeling needed to preserve characteristics and identity. Customer specifications are internal documents applicable only to
products manufactured and inspected to requirements of individual customers; in effect, these documents translate customer drawings into modifications of the specified portions of KEMET standard
procedures.
The Quality System in total is controlled by the
KEMET Quality Manual and by various Quality
Operating Documents. All documents, and revisions
thereto, bear specified approval signatures.
DETAILED SPECIFICATION:
Temperature Characteristics
Electrical stability with respect to temperature and
voltage is related inversely to the packaging efficiency (capacitance X voltage in a given case size).
COG (BP) is made from ceramic materials which are
not ferroelectric, yielding superior stability but low
packaging efficiency. X7R (BX) is made from materials which are ferroelectric, such as barium titanate,
yielding a stable and high packaging efficiency.
Aging
If the temperature of a barium titanate dielectric is
lowered after an excursion above its curie point, the
ceramic crystalline structure gradually reverts to the
tetragonal form typical of the low temperature conditions. The reversion requires a considerable length
of time, and its effect in practical capacitors has
become known as “Aging”. The rate of aging is
affected by both the temperature and the applied
voltage experienced by the capacitor. The COG (BP)
formulation is non-ferroelectric and does not exhibit
aging. The X7R (BX) formulation exhibits its own
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
1
CERAMIC HIGH RELIABILITY CAPACITORS
characteristic aging rate which describes a decrease
in capacitance versus time. The capacitance of the
X7R dielectric decreases approximately 1.0% during each decade of hours following a return to temperatures below the curie point. In other words,
capacitance will decrease 1.0% between 1 and 10
hours, another 1.0% between 10 and 100 hours,
another 1.0% between 100 and 1000 hours, etc.
KEMET takes into consideration the aging rate by
designing capacitors to fall within the specified
capacitance tolerance at 1000 hours. Inasmuch as
the aging rate is exponential, very little change in
capacitance will take place after 1000 hours.
Voltage Effects
Ferroelectric materials are also affected by applied
voltage, both alternating and direct. Low values of
voltage produce a slight increase in capacitance and
dissipation factor. Higher voltages cause a decrease
in capacitance. Typically, capacitors with X7R characteristic decrease in capacitance by approximately
10% when rated DC voltage is applied.
A small portion of the decrease in capacitance by
the application of a high DC voltage persists after the
voltage is removed and then disappears gradually.
PERFORMANCE CHARACTERISTICS
General Information
Working Voltage:
COG (BP) - 50,100 & 200 volts
X7R (BX) - 50,100 & 200 volts
Temperature Characteristics:
COG (BP): 0± 30 ppm/C from -55°C to +125°C.
(Limits widen below 20 pF.)
X7R (BX): ±15%; from -55°C to +125°C.
Capacitance Tolerance:
COG (BP): C - ±0.25pF; D - ±0.5pF; F - ±1%;
G-± 2%; J- ±5%; K- ±10%; M- ±20%.
X7R (BX): J - ±5%; K - ±10%; M - ±20%.
Electrical
Capacitance: Within specified tolerance when
measured with 1 volt RMS @ 1 kHz (1000pF or less
@ 1 MHz for COG (BP)).
Dissipation Factor:
25°C @ 1 kHz (1000 pF or less at 1 MHz for
COG (BP)).
COG (BP): 0.15% maximum
X7R (BX): 2.5% maximum
Customer Testing
Because of temperature and voltage effects, caution
must be used in establishing a testing sequence for
ceramic capacitors. Insulation resistance measurements and tests of dielectric withstanding voltage
both require application of high DC voltage and
cause temporary changes in capacitance. These
tests, therefore, should not be conducted until
capacitance testing is completed. Alternatively, the
capacitors can be “de-aged” at high temperature as
described above. A stabilization time at room ambient of 24 hours should be used after de-aging.
Insulation Resistance:
After 2 minutes electrification:
at 25°C and rated voltage:
COG (BP): l00K megohms or (1000 megohm
X µF), whichever is less.
X7R (BX): l00K megohms or (1000 megohm
X µF), whichever is less.
at 125°C and rated voltage:
COG (BP): 10K megohms or (100 megohm
X µF), whichever is less.
X7R (BX): 10K megohms or (100 megohm
X µF), whichever is less.
See F-3101 Catalog for more details.
Dielectric Withstanding Voltage: 250% of
rated voltage for 5 seconds with current limited to
50 MA at 25°C.
Aging Rate: % Delta Cap/Decade Hour, Typical
COG (BP): 0%
X7R (BX): 1.0%
2
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC HIGH RELIABILITY CAPACITORS
Loaded Impedance
Chip Impedance - Ohms
Chip Impedance - Ohms
MIL-PRF-123/GR900
TYPICAL PERFORMANCE CURVES
3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC HIGH RELIABILITY MOLDED & CHIPS
GENERAL INFORMATION MIL-PRF-123
INTRODUCTION
10. Radiographic Inspection (leaded devices only) (100% of lot).
MIL-PRF-123 specification covers the general requirements for high
reliability, general purpose (BX) and temperature stable (BP) ceramic
dielectric fixed capacitors for space, missile, and other high reliability
applications. Capacitors covered by MIL-PRF-123 may be used in
critical frequency determining applications, timing circuits, and other
applications where absolute stability is required (BP) and in applications where appreciable variations in capacitance with respect to
temperature, voltage, frequency, and life can be tolerated (BX).
11. Visual Inspection per MIL-PRF-123 criteria.
SCREENING TESTS
Each lot has the following In-Process Inspections performed:
1. 100% Ultrasonic Scan
2. In-Process Destructive Physical Analysis
3. 100% visual inspection at a minimum of 10X magnification
4. Pre-encapsulation terminal strength evaluation (leaded devices
only). Radial leaded capacitors must meet a minimum lead pull
of 1.8 kg (4.0 lbs.).
The following Group A shall be performed on each lot:
1. Thermal Shock—Performed in accordance to MIL-STD-202,
Method 107, Condition A, with step 3 being 125°C. Number of
cycles shall be 20 (100% of lot).
2. Voltage Conditioning—The voltage conditioning shall consist
of applying twice the rated voltage to the units at the maximum
rated temperature of 125°C for a minimum of 168 hours and a
maximum of 264 hours. The voltage conditioning may be terminated at any time during 168 hours to 264 hours time interval
that confirmed failures meet the requirements for the PDA during the last 48 hours listed in Table I below (100% of lot).
Optional Voltage Conditioning (Accelerated Voltage
Conditioning)—AII conditions of the standard voltage conditioning apply with the exception of the increased voltage and the
decreased test time. (Refer to Mil-PRF-123 for formula.)
*Step 5 is performed on chips at this point (100% of lot).
3. Dielectric Withstanding Voltage 250% of the dc rated voltage
at 25°C (100% of lot).
4. Insulation Resistance—The 25°C measurement with rated
voltage applied shall be the lesser of 100,000 megohms or 1000
megohm-microfarads (100% of lot).
*5.Insulation Resistance—The 125°C measurement with rated
voltage applied shall be the lesser of 10,000 megohms or 100
megohm-microfarads (1000% of lot). For chips 125°C IR is performed prior to step 3 above.
6. Storage at 150°C for 2 hours minimum without voltage applied
followed by a 12-hour minimum stabilization period (temperature characteristic BX only).
7. Capacitance must be within specified tolerance at 25°C (100%
of lot). Cap Exclusion: Capacitance values no more than 5% or
.5 pF, whichever is greater, for BX characteristics or 1% or .3 pF,
whichever is greater, for BP characteristics beyond specified
tolerance limit shall be removed from the lot but shall not be considered defective for determination of the PDA.
12. Destructive Physical Analysis per EIA-469 and MIL-PRF-123.
SAMPLE TESTS
The following Group B tests shall be performed on samples from
each lot, which have been subjected to and have passed Group A
inspection.
1. Thermal Shock—Performed in accordance to MIL-STD-202,
Method 107, Condition A, with step 3 being 125°C. Number of
cycles shall be 100.
2. Life Test per MIL-5TD-202, Method 108. Test temperature and
tolerance is +125°C +4°,-0°C. Capacitors shall be subjected to
2X rated voltage for 1000 hours.
3. Humidity, steady state, low voltage per MIL-STD-202,
Method 103, Condition A. Capacitors shall be subjected to an
environment of 85°C with 85% relative humidity for 240 hours
minimum. Cycling shall not be performed. A dc potential of 1.3
±0.25 volts shall be applied continuously through a 100,000
ohm resistance to each device under test. At completion, 25°C
IR and Cap are read.
4. Voltage-temperature limits—Capacitance is measured at various temperatures (-55°C to +125°C) with and without rated
voltage.
5. Moisture Resistance per MIL-STD-202, Method 106. There
shall be 20 continuous cycles. During the first 10 cycles only, a
dc potential of 50 volts shall be applied across the capacitor terminals. Once each day, a check shall be performed to determine whether a capacitor has shorted. Vibration cycle of MILSTD-202, Method 106, Step 7b shall not be performed. Upon
completion of MIL-STD-202, Method 106, Step 6 of the final
cycle, capacitors shall be measured for capacitance, dielectric
withstanding voltage and insulation resistance.
The following Group C tests shall be performed on samples selected
from lots that have passed Group A and have been submitted for
Group B inspection. Samples shall be selected every two months.
1. Terminal Strength
2. Solderability
3. Resistance to Soldering Heat
4. Solvent Resistance (Leaded devices only)
All lots shipped must have been subjected to and passed Group A
and B testing.
STANDARD PACKAGING FOR
MIL-PRF-123 IS AS FOLLOWS:
C052Z
tray
C062Z
C512Z
tray
1 pc. per bag
8. Dissipation Factor shall not exceed 2.5% for X dielectric,
0.15% for G dielectric at 25°C (100% of lot).
9. Percent Defective Allowable (PDA). The following table lists
the PDA requirements for MIL-PRF-123 Group A:
4
KEMET
STYLE
C052Z
C062Z
C512Z
C0805Z
C1206Z
C1210Z
C1808Z
C1812Z
C1825Z
C2225Z
MIL
STYLE
CKS05
CKS06
CKS07
CKS51
CKS55
CKS52
CKS53
CKS56
CKS57
CKS54
TABLE I
BURN IN PDA
LAST 48 HOURS
1 unit or 0.1%
1 unit or 0.2%
1 unit or 0.2%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
PDA
OVERALL
3%
5%
5%
3%
3%
3%
3%
3%
3%
3%
C0805Z
C1206Z
C1210Z
C1808Z
C1812Z
C1825Z
C2225Z
chip tray
chip tray
chip tray
chip tray
chip tray
chip tray
chip tray
DATA PACKAGE
A data package is sent with each shipment which contains:
1. Summary of Group A testing
2. Summary of Group B testing
3. Group B Variables Test Data
4. Lead Pull Data (Leaded Devices Only)
5. Final Destructive Physical Analysis Report
6. Certificate of Compliance stating that the ceramic capacitors
supplied meet all the requirements of MIL-PRF-123, the applicable slash sheet(s) and all associated documents.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/RADIAL - MIL-PRF-123
CAPACITOR OUTLINE DRAWINGS - (RADIAL LEADS)
DIMENSIONS — INCHES & (MILLIMETERS)
CASE
SIZE
MILITARY
EQUIVALENT
STYLES
H
HEIGHT
L
LENGTH
W
WIDTH
S
LEAD
SPACING
C052
CKS05
.190 ± .010 (4.83 ± .25)
.190 ± .010 (4.83 ± .25)
.090 ± .010 (2.29 ± .25)
.200 ± .015 (5.08 ± .38)
C062
CKS06
.290 ± .010 (7.37 ±.25)
.290 ± .010 (7.37 ±.25)
.090 ± .010 (2.29 ± .25)
.200 ± .015 (5.08 ± .38)
C512
CKS07
.480 ± .020 (12.19 ± .51)
.480 ± .020 (12.19 ± .51)
.140 ± .010 (3.56 ± .25)*
.400 ± .020 (10.16 ± .51)
*0.200 maximum for some capacitance values.
ORDERING INFORMATION
KEMET PART NUMBER
C 052 Z 102 K 5 G 5 C A
FAILURE RATE
CERAMIC
CASE SIZE
A—Standard — Not applicable
LEAD MATERIAL
Radial
C052
C062
C512
C—Standard
Radial: solder coated copper
INTERNAL CONSTRUCTION
SPECIFICATION
5—Standard
Z — Mil-C-123
CAPACITANCE
In picofarad code
TEMPERATURE CHARACTERISTIC
CAPACITANCE TOLERANCE
Standard
C— ±0.25 pF
J— ±5%
D—± 0.5 pF
K— ±10%
F— ±1%
Capacitance Change With Temp.
Measured
Measured
Without
With Bias
Temp.
DC Bias
(Rated)
Range, °C
Voltage
Voltage
KEMET
Designator
Military
Equivalent
WORKING VOLTAGE
G
(Ultra
Stable)
BP
-55 to
+125
±30
ppm/°C
5 — 50
1 — 100
X
(Stable)
BX
-55 to
+125
±15%
±30
ppm/°C
+15%
-25%
5
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/RADIAL - MIL-PRF-123 (BP DIELECTRIC)
MIL-PRF-123 MILITARY PART NUMBER
M123 A 01 BX B 103 K C
TERMINATION
Molded
C — Solder-coated copper (radial)
MILITARY
SPECIFICATION
NUMBER
TOLERANCE
C—±0.25pF J—±5%
D—±0.5pF
K—±10%
F—±1%
MODIFICATION LETTER
Indicates the latest characteristics
of the part in the specification sheet.
CAPACITANCE
In picofarad code
MIL-PRF-123 SLASH SHEET NUMBER
Slash
Sheet #
01
02
03
KEMET
Style
C052
C062
C512
Mil-C-123
Style
CKS05
CKS06
CKS07
VOLTAGE
VOLTAGE-TEMPERATURE CHARACTERISTICS
Capacitance Change With Temp.
KEMET
Designator
Military
Equivalent
Temp.
Range, °C
Measured
Without DC Bias
Voltage
Measured
(Rated) With Bias
Voltage
G
(Ultra
Stable)
BP
-55 to
+125
±30
ppm/°C
±30
ppm/°C
BX
-55 to
+125
±15%
X
(Stable)
+15%
-25%
RATINGS & PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BP - C052 SIZE (MILITARY CKS05)
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
C052Z479(1)1G5CA
C052Z519(1)1G5CA
C052Z569(1)1G5CA
C052Z629(1)1G5CA
C052Z689(1)1G5CA
C052Z759(1)1G5CA
C052Z829(1)1G5CA
C052Z919(1)1G5CA
C052Z100(2)1G5CA
C052Z110(2)1G5CA
C052Z120(2)1G5CA
C052Z130(2)1G5CA
C052Z150(2)1G5CA
C052Z160(2)1G5CA
C052Z180(2)1G5CA
C052Z200(2)1G5CA
C052Z220(2)1G5CA
C052Z240(2)1G5CA
C052Z270(3)1G5CA
C052Z300(3)1G5CA
C052Z330(3)1G5CA
C052Z360(3)1G5CA
C052Z390(3)1G5CA
C052Z430(3)1G5CA
C052Z470(3)1G5CA
C052Z510(3)1G5CA
C052Z560(3)1G5CA
C052Z620(3)1G5CA
C052Z680(3)1G5CA
C052Z750(3)1G5CA
C052Z820(3)1G5CA
C052Z910(3)1G5CA
C052Z101(3)1G5CA
C052Z111(3)1G5CA
C052Z121(3)1G5CA
C052Z131(3)1G5CA
C052Z151(3)1G5CA
C052Z161(3)1G5CA
C052Z181(3)1G5CA
C052Z201(3)1G5CA
C052Z221(3)1G5CA
C052Z241(3)1G5CA
M123A01BPC4R7(1)C
M123A01BPC5R1(1)C
M123A01BPC5R6(1)C
M123A01BPC6R2(1)C
M123A01BPC6R8(1)C
M123A01BPC7R5(1)C
M123A01BPC8R2(1)C
M123A01BPC9R1(1)C
M123A01BPC100(2)C
M123A01BPC110(2)C
M123A01BPC120(2)C
M123A01BPC130(2)C
M123A01BPC150(2)C
M123A01BPC160(2)C
M123A01BPC180(2)C
M123A01BPC200(2)C
M123A01BPC220(2)C
M123A01BPC240(2)C
M123A01BPC270(3)C
M123A01BPC300(3)C
M123A01BPC330(3)C
M123A01BPC360(3)C
M123A01BPC390(3)C
M123A01BPC430(3)C
M123A01BPC470(3)C
M123A01BPC510(3)C
M123A01BPC560(3)C
M123A01BPC620(3)C
M123A01BPC680(3)C
M123A01BPC750(3)C
M123A01BPC820(3)C
M123A01BPC910(3)C
M123A01BPC101(3)C
M123A01BPC111(3)C
M123A01BPC121(3)C
M123A01BPC131(3)C
M123A01BPC151(3)C
M123A01BPC161(3)C
M123A01BPC181(3)C
M123A01BPC201(3)C
M123A01BPC221(3)C
M123A01BPC241(3)C
CAP.
pF
6
C052Z271(3)5G5CA
C052Z301(3)5G5CA
C052Z331(3)5G5CA
C052Z361(3)5G5CA
C052Z391(3)5G5CA
C052Z431(3)5G5CA
C052Z471(3)5G5CA
C052Z511(3)5G5CA
M123A01BPB271(3)C
M123A01BPB301(3)C
M123A01BPB331(3)C
M123A01BPB361(3)C
M123A01BPB391(3)C
M123A01BPB431(3)C
M123A01BPB471(3)C
M123A01BPB511(3)C
MIL-PRF-123
PART NUMBER
50 VOLT - BP - C052 SIZE (MILITARY CKS05) (Cont’d)
560
620
680
750
820
910
1,000
1,100
1,200
1,300
1,500
1,600
1,800
2,000
2,200
2,400
2,700
C052Z561(3)5G5CA
C052Z621(3)5G5CA
C052Z681(3)5G5CA
C052Z751(3)5G5CA
C052Z821(3)5G5CA
C052Z911(3)5G5CA
C052Z102(3)5G5CA
C052Z112(3)5G5CA
C052Z122(3)5G5CA
C052Z132(3)5G5CA
C052Z152(3)5G5CA
C052Z162(3)5G5CA
C052Z182(3)5G5CA
C052Z202(3)5G5CA
C052Z222(3)5G5CA
C052Z242(3)5G5CA
C052Z272(3)5G5CA
M123A01BPB561(3)C
M123A01BPB621(3)C
M123A01BPB681(3)C
M123A01BPB751(3)C
M123A01BPB821(3)C
M123A01BPB911(3)C
M123A01BPB102(3)C
M123A01BPB112(3)C
M123A01BPB122(3)C
M123A01BPB132(3)C
M123A01BPB152(3)C
M123A01BPB162(3)C
M123A01BPB182(3)C
M123A01BPB202(3)C
M123A01BPB222(3)C
M123A01BPB242(3)C
M123A01BPB272(3)C
100 VOLT - BP - C062 SIZE (MILITARY CKS06)
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1,000
1,100
1,200
1,300
1,500
1,600
1,800
2,000
2,200
2,400
50 VOLT - BP - C052 SIZE (MILITARY CKS05)
270
300
330
360
390
430
470
510
KEMET
PART NUMBER
C062Z271(3)1G5CA
C062Z301(3)1G5CA
C062Z331(3)1G5CA
C062Z361(3)1G5CA
C062Z391(3)1G5CA
C062Z431(3)1G5CA
C062Z471(3)1G5CA
C062Z511(3)1G5CA
C062Z561(3)1G5CA
C062Z621(3)1G5CA
C062Z681(3)1G5CA
C062Z751(3)1G5CA
C062Z821(3)1G5CA
C062Z911(3)1G5CA
C062Z102(3)1G5CA
C062Z112(3)1G5CA
C062Z122(3)1G5CA
C062Z132(3)1G5CA
C062Z152(3)1G5CA
C062Z162(3)1G5CA
C062Z182(3)1G5CA
C062Z202(3)1G5CA
C062Z222(3)1G5CA
C062Z242(3)1G5CA
M123A02BPC271(3)C
M123A02BPC301(3)C
M123A02BPC331(3)C
M123A02BPC361(3)C
M123A02BPC391(3)C
M123A02BPC431(3)C
M123A02BPC471(3)C
M123A02BPC511(3)C
M123A02BPC561(3)C
M123A02BPC621(3)C
M123A02BPC681(3)C
M123A02BPC751(3)C
M123A02BPC821(3)C
M123A02BPC911(3)C
M123A02BPC102(3)C
M123A02BPC112(3)C
M123A02BPC122(3)C
M123A02BPC132(3)C
M123A02BPC152(3)C
M123A02BPC162(3)C
M123A02BPC182(3)C
M123A02BPC202(3)C
M123A02BPC222(3)C
M123A02BPC242(3)C
50 VOLT - BP - C062 SIZE (MILITARY CKS06)
2,700
3,000
3,300
3,600
3,900
4,300
4,700
C062Z272(3)5G5CA
C062Z302(3)5G5CA
C062Z332(3)5G5CA
C062Z362(3)5G5CA
C062Z392(3)5G5CA
C062Z432(3)5G5CA
C062Z472(3)5G5CA
M123A02BPB272(3)C
M123A02BPB302(3)C
M123A02BPB332(3)C
M123A02BPB362(3)C
M123A02BPB392(3)C
M123A02BPB432(3)C
M123A02BPB472(3)C
To complete the part numbers, insert the following tolerances: (1) C, ±0.25pF; D. ±0.5pF (2) C, ±0.25pF; J, ±5%; K, ±10% (3) F, ±1%; J, ±5%; K, ±10%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/RADIAL - MIL-PRF-123 (BP/BX DIELECTRIC)
RATINGS & PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BP - C512 SIZE (MILITARY CKS07)
2,700
3,000
3,300
3,600
3,900
4,300
4,700
5,100
5,600
6,200
6,800
7,500
8,200
9,100
10,000
C512Z272(3)1G5CA
C512Z302(3)1G5CA
C512Z332(3)1G5CA
C512Z362(3)1G5CA
C512Z392(3)1G5CA
C512Z432(3)1G5CA
C512Z472(3)1G5CA
C512Z512(3)1G5CA
C512Z562(3)1G5CA
C512Z622(3)1G5CA
C512Z682(3)1G5CA
C512Z752(3)1G5CA
C512Z822(3)1G5CA
C512Z912(3)1G5CA
C512Z103(3)1G5CA
M123A03BPC272(3)C
M123A03BPC302(3)C
M123A03BPC332(3)C
M123A03BPC362(3)C
M123A03BPC392(3)C
M123A03BPC432(3)C
M123A03BPC472(3)C
M123A03BPC512(3)C
M123A03BPC562(3)C
M123A03BPC622(3)C
M123A03BPC682(3)C
M123A03BPC752(3)C
M123A03BPC822(3)C
M123A03BPC912(3)C
M123A03BPC103(3)C
50 VOLT - BP - C512 SIZE (MILITARY CKS07)
11,000
12,000
13,000
15,000
16,000
18,000
20,000
22,000
24,000
27,000
30,000
33,000
36,000
39,000
43,000
47,000
51,000
56,000
62,000
68,000
75,000
82,000
91,000
100,000
C512Z113(3)5G5CA
C512Z123(3)5G5CA
C512Z133(3)5G5CA
C512Z153(3)5G5CA
C512Z163(3)5G5CA
C512Z183(3)5G5CA
C512Z203(3)5G5CA
C512Z223(3)5G5CA
C512Z243(3)5G5CA
C512Z273(3)5G5CA
C512Z303(3)5G5CA
C512Z333(3)5G5CA
C512Z363(3)5G5CA
C512Z393(3)5G5CA
C512Z433(3)5G5CA
C512Z473(3)5G5CA
C512Z513(3)5G5CA
C512Z563(3)5G5CA
C512Z623(3)5G5CA
C512Z683(3)5G5CA
C512Z753(3)5G5CA
C512Z823(3)5G5CA
C512Z913(3)5G5CA
C512Z104(3)5G5CA
CAP.
pF
KEMET
PART NUMBER
M123A03BPB113(3)C
M123A03BPB123(3)C
M123A03BPB133(3)C
M123A03BPB153(3)C
M123A03BPB163(3)C
M123A03BPB183(3)C
M123A03BPB203(3)C
M123A03BPB223(3)C
M123A03BPB243(3)C
M123A03BPB273(3)C
M123A03BPB303(3)C
M123A03BPB333(3)C
M123A03BPB363(3)C
M123A03BPB393(3)C
M123A03BPB433(3)C
M123A03BPB473(3)C
M123A03BPB513(3)C
M123A03BPB563(3)C
M123A03BPB623(3)C
M123A03BPB683(3)C
M123A03BPB753(3)C
M123A03BPB823(3)C
M123A03BPB913(3)C
M123A03BPB104(3)C
MIL-PRF-123
PART NUMBER
100 VOLT - BX - C052 SIZE (MILITARY CKS05)
270
330
390
470
560
680
820
1,000
1,200
1,500
1,800
2,200
2,700
3,300
3,900
4,700
C052Z271K1X5CA
C052Z331K1X5CA
C052Z391K1X5CA
C052Z471K1X5CA
C052Z561K1X5CA
C052Z681K1X5CA
C052Z821K1X5CA
C052Z102K1X5CA
C052Z122K1X5CA
C052Z152K1X5CA
C052Z182K1X5CA
C052Z222K1X5CA
C052Z272K1X5CA
C052Z332K1X5CA
C052Z392K1X5CA
C052Z472K1X5CA
M123A01BXC271KC
M123A01BXC331KC
M123A01BXC391KC
M123A01BXC471KC
M123A01BXC561KC
M123A01BXC681KC
M123A01BXC821KC
M123A01BXC102KC
M123A01BXC122KC
M123A01BXC152KC
M123A01BXC182KC
M123A01BXC222KC
M123A01BXC272KC
M123A01BXC332KC
M123A01BXC392KC
M123A01BXC472KC
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BX - C062 SIZE (MILITARY CKS06)
5,600
6,800
8,200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
C062Z562K1X5CA
C062Z682K1X5CA
C062Z822K1X5CA
C062Z103K1X5CA
C062Z123K1X5CA
C062Z153K1X5CA
C062Z183K1X5CA
C062Z223K1X5CA
C062Z273K1X5CA
C062Z333K1X5CA
C062Z393K1X5CA
C062Z473K1X5CA
C062Z563K1X5CA
C062Z683K1X5CA
C062Z823K1X5CA
C062Z104K1X5CA
M123A02BXC562KC
M123A02BXC682KC
M123A02BXC822KC
M123A02BXC103KC
M123A02BXC123KC
M123A02BXC153KC
M123A02BXC183KC
M123A02BXC223KC
M123A02BXC273KC
M123A02BXC333KC
M123A02BXC393KC
M123A02BXC473KC
M123A02BXC563KC
M123A02BXC683KC
M123A02BXC823KC
M123A02BXC104KC
50 VOLT - BX - C062 SIZE (MILITARY CKS06)
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
470,000
560,000
680,000
820,000
1,000,000
CAP.
pF
C062Z563K5X5CA
C062Z683K5X5CA
C062Z823K5X5CA
C062Z104K5X5CA
C062Z124K5X5CA
C062Z154K5X5CA
C062Z184K5X5CA
C062Z224K5X5CA
C062Z274K5X5CA
C062Z334K5X5CA
C062Z394K5X5CA
C062Z474K5X5CA
C062Z564K5X5CA
C062Z684K5X5CA
C062Z824K5X5CA
C062Z105K5X5CA
M123A02BXB563KC
M123A02BXB683KC
M123A02BXB823KC
M123A02BXB104KC
M123A02BXB124KC
M123A02BXB154KC
M123A02BXB184KC
M123A02BXB224KC
M123A02BXB274KC
M123A02BXB334KC
M123A02BXB394KC
M123A02BXB474KC
M123A02BXB564KC
M123A02BXB684KC
M123A02BXB824KC
M123A02BXB105KC
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BX - C512 SIZE (MILITARY CKS07)
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
470,000
C512Z563K1X5CA
C512Z683K1X5CA
C512Z823K1X5CA
C512Z104K1X5CA
C512Z124K1X5CA
C512Z154K1X5CA
C512Z184K1X5CA
C512Z224K1X5CA
C512Z274K1X5CA
C512Z334K1X5CA
C512Z394K1X5CA
C512Z474K1X5CA
M123A03BXC563KC
M123A03BXC683KC
M123A03BXC823KC
M123A03BXC104KC
M123A03BXC124KC
M123A03BXC154KC
M123A03BXC184KC
M123A03BXC224KC
M123A03BXC274KC
M123A03BXC334KC
M123A03BXC394KC
M123A03BXC474KC
50 VOLT - BX - C512 SIZE (MILITARY CKS07)
560,000
680,000
820,000
1,000,000
C512Z564K5X5CA
C512Z684K5X5CA
C512Z824K5X5CA
C512Z105K5X5CA
M123A03BXB564KC
M123A03BXB684KC
M123A03BXB824KC
M123A03BXB105KC
To complete the part numbers, insert the following tolerances: (1) C, ±0.25pF;
D, ±0.5pF (2) C, ±0.25pF; J, ±5%; K, ±10% (3) F, ±1%; J, ±5%; K, ±10%
50 VOLT - BX - C052 SIZE (MILITARY CKS05)
5,600
6,800
8,200
10,000
C052Z562K5X5CA
C052Z682K5X5CA
C052Z822K5X5CA
C052Z103K5X5CA
M123A01BXB562KC
M123A01BXB682KC
M123A01BXB822KC
M123A01BXB103KC
MARKING INFORMATION
M123A
01BPC
4R7CC
JAN
XXXX*
31433
C052Z
MIL-PRF-123
Part Number
— “JAN”
— Date Lot Code
— CAGE
M123A
02BPC
271FC
JAN
271F
100V
XXXX*
31433
C062Z, C512Z
MIL-PRF-123
Part Number
“JAN”
—
—
—
—
CAGE =
Commercial and
Government Entity
Capacitance Code & Tolerance
Voltage
Date Lot Code
CAGE
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
7
CERAMIC CHIP/MIL-PRF-123
CAPACITOR OUTLINE DRAWINGS
NOTE: For solder coated termination, add 0.015” (0.38mm) to the positive width and thickness tolerances. Add the following to the positive
length tolerance: CKS51 - 0.020” (0.51mm); CKS52, CKS53 and CKS54 - 0.025 (0.64mm); add 0.012” (0.30mm) to the bandwidth tolerance.
DIMENSIONS — INCHES
Chip
Size
Military
Equivalent
Styles
L
Length
W
Width
T
Thickness
Maximum
0805
CKS51
0.080 ± 0.015
0.050 ± 0.015
0.055
1210
CKS52
0.120 ± 0.015
0.100 ± 0.015
0.065
1808
CKS53
0.180 ± 0.015
0.080 ± 0.015
0.065
2225
CKS54
0.220 ± 0.015
0.250 ± 0.015
0.070
1206
CKS55
0.120 ± 0.015
0.060 ± 0.015
0.065
1812
CKS56
0.180 ± 0.015
0.125 ± 0.015
0.080
1825
CKS57
0.180 ± 0.015
0.250 ± 0.015
0.080
MARKING
Capacitors shall be legibly laser
marked in contrasting color with
the KEMET trademark and
2-digit capacitance symbol.
KEMET ORDERING INFORMATION
C 0805 Z 101 K 5 G A L
Termination
Ceramic
Chip Size
H = Nickel Guarded, Solder-Coated (Sn60)
L = 70/30 Tin/Lead Plated
0805, 1206, 1210, 1808, 1812, 1825, 2225
Failure Rate
Specification
(%/1000 Hours)
A - Standard — Not Applicable
Z — Mil-PRF-123
Temperature Characteristic
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
Capacitance Tolerance
C— ±0.25pF
D— ±0.5 pF
F— ±1%
J— ±5%
K— ±10%
KEMET
Designator
Military
Equivalent
Temp.
Range, °C
Measured Without
DC BiasVoltage
G
(Ultra Stable)
BP
-55 to
+125
±30
ppm °C
±30
ppm °C
-55 to
+125
±15%
+15%
-25%
X
(Stable)
Working Voltage
BX
Measured With Bias
(Rated Voltage)
5 — 50; 1 — 100
M123 A
10
BX
B
472
K
Z
Termination
Z = 70/30 Tin Lead Plated
S = Nickel guarded Soldercoated (Sn60)
Military Specification
Number
Modification Number
Indicates the latest characteristics of
the part in the specification sheet
Tolerance
C = ±0.25pF; D = ±0.5pF;
F = ±1%; J = ±5%; K = ± 10%
MIL-PRF-123 Slash Sheet Number
Capacitance Picofarad Code
Slash Sheet # KEMET Style
Voltage
B = 50; C = 100
MIL-PRF-123
Style
10
C0805
CKS51
11
12
C1210
C1808
CKS52
CKS53
13
C2225
CKS54
21
C1206
CKS55
22
C1812
CKS56
23
C1825
CKS57
Temperature Characteristic
Capacitance Change with Temperature
Temp.
KEMET
Military
Range,
Designator Equivalent
°C
Measured Without
DC Bias Voltage
Measured With
Bias (Rated
Voltage)
G
(UltraStable)
BP
-55 to
125
±30
ppm°C
±30
ppm°C
X
(Stable)
BX
-55 to
+125
±15%
+15%
-25%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
9
CERAMIC CHIP/MIL-PRF-123 (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50/100 VOLT- BP-C0805 SIZE (MILITARY CKS51)
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
68.0
75.0
82.0
91.0
100.0
110.0
120.0
130.0
150.0
160.0
180.0
200.0
220.0
240.0
270.0
300.0
330.0
360.0
390.0
430.0
470.0
C0805Z109(1)(8)GA(9)
C0805Z119(1)(8)GA(9)
C0805Z129(1)(8)GA(9)
C0805Z139(1)(8)GA(9)
C0805Z159(1)(8)GA(9)
C0805Z169(1)(8)GA(9)
C0805Z189(1)(8)GA(9)
C0805Z209(1)(8)GA(9)
C0805Z229(1)(8)GA(9)
C0805Z249(1)(8)GA(9)
C0805Z279(1)(8)GA(9)
C0805Z309(1)(8)GA(9)
C0805Z339(1)(8)GA(9)
C0805Z369(1)(8)GA(9)
C0805Z399(1)(8)GA(9)
C0805Z439(1)(8)GA(9)
C0805Z479(1)(8)GA(9)
C0805Z519(1)(8)GA(9)
C0805Z569(1)(8)GA(9)
C0805Z629(1)(8)GA(9)
C0805Z689(1)(8)GA(9)
C0805Z759(1)(8)GA(9)
C0805Z829(1)(8)GA(9)
C0805Z919(1)(8)GA(9)
C0805Z100(2)(8)GA(9)
C0805Z110(2)(8)GA(9)
C0805Z120(2)(8)GA(9)
C0805Z130(2)(8)GA(9)
C0805Z150(2)(8)GA(9)
C0805Z160(2)(8)GA(9)
C0805Z180(2)(8)GA(9)
C0805Z200(2)(8)GA(9)
C0805Z220(2)(8)GA(9)
C0805Z240(2)(8)GA(9)
C0805Z270(3)(8)GA(9)
C0805Z300(3)(8)GA(9)
C0805Z330(3)(8)GA(9)
C0805Z360(3)(8)GA(9)
C0805Z390(3)(8)GA(9)
C0805Z430(3)(8)GA(9)
C0805Z470(3)(8)GA(9)
C0805Z510(3)(8)GA(9)
C0805Z560(3)(8)GA(9)
C0805Z620(3)(8)GA(9)
C0805Z680(3)(8)GA(9)
C0805Z750(3)(8)GA(9)
C0805Z820(3)(8)GA(9)
C0805Z910(3)(8)GA(9)
C0805Z101(3)(8)GA(9)
C0805Z111(3)(8)GA(9)
C0805Z121(3)(8)GA(9)
C0805Z131(3)(8)GA(9)
C0805Z151(3)(8)GA(9)
C0805Z161(3)(8)GA(9)
C0805Z181(3)(8)GA(9)
C0805Z201(3)(8)GA(9)
C0805Z221(3)(8)GA(9)
C0805Z241(3)(8)GA(9)
C0805Z271(3)(8)GA(9)
C0805Z301(3)(8)GA(9)
C0805Z331(3)(8)GA(9)
C0805Z361(3)(8)GA(9)
C0805Z391(3)(8)GA(9)
C0805Z431(3)(8)GA(9)
C0805Z471(3)(8)GA(9)
M123A10BP(7)1R0(1)(10)
M123A10BP(7)1R1(1)(10)
M123A10BP(7)1R2(1)(10)
M123A10BP(7)1R3(1)(10)
M123A10BP(7)1R5(1)(10)
M123A10BP(7)1R6(1)(10)
M123A10BP(7)1R8(1)(10)
M123A10BP(7)2R0(1)(10)
M123A10BP(7)2R2(1)(10)
M123A10BP(7)2R4(1)(10)
M123A10BP(7)2R7(1)(10)
M123A10BP(7)3R0(1)(10)
M123A10BP(7)3R3(1)(10)
M123A10BP(7)3R6(1)(10)
M123A10BP(7)3R9(1)(10)
M123A10BP(7)4R3(1)(10)
M123A10BP(7)4R7(1)(10)
M123A10BP(7)5R1(1)(10)
M123A10BP(7)5R6(1)(10)
M123A10BP(7)6R2(1)(10)
M123A10BP(7)6R8(1)(10)
M123A10BP(7)7R5(1)(10)
M123A10BP(7)8R2(1)(10)
M123A10BP(7)9R1(1)(10)
M123A10BP(7)100(2)(10)
M123A10BP(7)110(2)(10)
M123A10BP(7)120(2)(10)
M123A10BP(7)130(2)(10)
M123A10BP(7)150(2)(10)
M123A10BP(7)160(2)(10)
M123A10BP(7)180(2)(10)
M123A10BP(7)200(2)(10)
M123A10BP(7)220(2)(10)
M123A10BP(7)240(2)(10)
M123A10BP(7)270(3)(10)
M123A10BP(7)300(3)(10)
M123A10BP(7)330(3)(10)
M123A10BP(7)360(3)(10)
M123A10BP(7)390((3)(10)
M123A10BP(7)430(3)(10)
M123A10BP(7)470(3)(10)
M123A10BP(7)510(3)(10)
M123A10BP(7)560(3)(10)
M123A10BP(7)620(3)(10)
M123A10BP(7)680(3)(10)
M123A10BP(7)750(3)(10)
M123A10BP(7)820(3)(10)
M123A10BP(7)910(3)(10)
M123A10BP(7)101(3)(10)
M123A10BP(7)111(3)(10)
M123A10BP(7)121(3)(10)
M123A10BP(7)131(3)(10)
M123A10BP(7)151(3)(10)
M123A10BP(7)161(3)(10)
M123A10BP(7)181(3)(10)
M123A10BP(7)201(3)(10)
M123A10BP(7)221(3)(10)
M123A10BP(7)241(3)(10)
M123A10BP(7)271(3)(10)
M123A10BP(7)301(3)(10)
M123A10BP(7)331(3)(10)
M123A10BP(7)361(3)(10)
M123A10BP(7)391(3)(10)
M123A10BP(7)431(3)(10)
M123A10BP(7)471(3)(10)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50 VOLT-BP-C0805 SIZE (MILITARY CKS51)
510.0
C0805Z511(3)5GA(9)
M123A10BPB511(3)(10)
560.0
C0805Z561(3)5GA(9)
M123A10BPB561(3)(10)
620.0
C0805Z621(3)5GA(9)
M123A10BPB621(3)(10)
680.0
C0805Z681(3)5GA(9)
M123A10BPB681(3)(10)
50/100 VOLT-BX-C0805 SIZE (MILITARY CKS51)
330.0
C0805Z331K(8)XA(9)
M123A10BX(7)331K(10)
390.0
C0805Z391K(8)XA(9)
M123A10BX(7)391K(10)
470.0
C0805Z471K(8)XA(9)
M123A10BX(7)471K(10)
560.0
C0805Z561K(8)XA(9)
M123A10BX(7)561K(10)
680.0
C0805Z681K(8)XA(9)
M123A10BX(7)681K(10)
820.0
C0805Z821K(8)XA(9)
M123A10BX(7)821K(10)
1,000.0
C0805Z102K(8)XA(9)
M123A10BX(7)102K(10)
1,200.0
C0805Z122K(8)XA(9)
M123A10BX(7)122K(10)
1,500.0
C0805Z152K(8)XA(9)
M123A10BX(7)152K(10)
1,800.0
C0805Z182K(8)XA(9)
M123A10BX(7)182K(10)
2,200.0
C0805Z222K(8)XA(9)
M123A10BX(7)222K(10)
2,700.0
C0805Z272K(8)XA(9)
M123A10BX(7)272K(10)
3,300.0
C0805Z332K(8)XA(9)
M123A10BX(7)332K(10)
3,900.0
C0805Z392K(8)XA(9)
M123A10BX(7)392K(10)
4,700.0
C0805Z472K(8)XA(9)
M123A10BX(7)472K(10)
50 VOLT-BX-C0805 SIZE (MILITARY CKS51)
5,600.0
C0805Z562K5XA(9)
M123A10BXB562K(10)
6,800.0
C0805Z682K5XA(9)
M123A10BXB682K(10)
8,200.0
C0805Z822K5XA(9)
M123A10BXB822K(10)
10,000.0
C0805Z103K5XA(9)
M123A10BXB103K(10)
12,000.0
C0805Z123K5XA(9)
M123A10BXB123K(10)
15,000.0
C0805Z153K5XA(9)
M123A10BXB153K(10)
18,000.0
C0805Z183K5XA(9)
M123A10BXB183K(10)
50/100 VOLT-BP-C1210 SIZE (MILITARY CKS52)
300.0
C1210Z301(3)(8)GA(9) M123A11BP(7)301(3)(10)
330.0
C1210Z331(3)(8)GA(9) M123A11BP(7)331(3)(10)
360.0
C1210Z361(3)(8)GA(9) M123A11BP(7)361(3)(10)
390.0
C1210Z391(3)(8)GA(9) M123A11BP(7)391(3)(10)
430.0
C1210Z431(3)(8)GA(9) M123A11BP(7)431(3)(10)
470.0
C1210Z471(3)(8)GA(9) M123A11BP(7)471(3)(10)
510.0
C1210Z511(3)(8)GA(9) M123A11BP(7)511(3)(10)
560.0
C1210Z561(3)(8)GA(9) M123A11BP(7)561(3)(10)
620.0
C1210Z621(3)(8)GA(9) M123A11BP(7)621(3)(10)
680.0
C1210Z681(3)(8)GA(9) M123A11BP(7)681(3)(10)
750.0
C1210Z751(3)(8)GA(9) M123A11BP(7)751(3)(10)
820.0
C1210Z821(3)(8)GA(9) M123A11BP(7)821(3)(10)
910.0
C1210Z911(3)(8)GA(9) M123A11BP(7)911(3)(10)
1,000.0
C1210Z102(3)(8)GA(9) M123A11BP(7)102(3)(10)
1,100.0
C1210Z112(3)(8)GA(9) M123A11BP(7)112(3)(10)
1,200.0
C1210Z122(3)(8)GA(9) M123A11BP(7)122(3)(10)
1,300.0
C1210Z132(3)(8)GA(9) M123A11BP(7)132(3)(10)
1,500.0
C1210Z152(3)(8)GA(9) M123A11BP(7)152(3)(10)
1,600.0
C1210Z162(3)(8)GA(9) M123A11BP(7)162(3)(10)
1,800.0
C1210Z182(3)(8)GA(9) M123A11BP(7)182(3)(10)
2,000.0
C1210Z202(3)(8)GA(9) M123A11BP(7)202(3)(10)
2,200.0
C1210Z222(3)(8)GA(9) M123A11BP(7)222(3)(10)
50 VOLT-BP-C1210 SIZE (MILITARY CKS52)
2,400.0
C1210Z242(3)5GA(9)
M123A11BPB242(3)(10)
2,700.0
C1210Z272(3)5GA(9)
M123A11BPB272(3)(10)
3,000.0
C1210Z302(3)5GA(9)
M123A11BPB302(3)(10)
3,300.0
C1210Z332(3)5GA(9)
M123A11BPB332(3)(10)
50/100 VOLT-BX-C1210 SIZE (MILITARY CKS52)
5,600.0
C1210Z562(6)(8)XA(9) M123A11BX(7)562(6)(10)
6,800.0
C1210Z682(6)(8)XA(9) M123A11BX(7)682(6)(10)
8,200.0
C1210Z822(6)(8)XA(9) M123A11BX(7)822(6)(10)
10,000.0
C1210Z103(6)(8)XA(9) M123A11BX(7)103(6)(10)
12,000.0
C1210Z123(6)(8)XA(9) M123A11BX(7)123(6)(10)
15,000.0
C1210Z153(6)(8)XA(9) M123A11BX(7)153(6)(10)
18,000.0
C1210Z183(6)(8)XA(9) M123A11BX(7)183(6)(10)
22,000.0
C1210Z223(6)(8)XA(9) M123A11BX(7)223(6)(10)
27,000.0
C1210Z273(6)(8)XA(9) M123A11BX(7)273(6)(10)
50 VOLT-BX-C1210 SIZE (MILITARY CKS52)
33,000.0
39,000.0
47,000.0
56,000.0
68,000.0
82,000.0
100,000.0
C1210Z333(6)5XA(9)
C1210Z393(6)5XA(9)
C1210Z473(6)5XA(9)
C1210Z563(6)5XA(9)
C1210Z683(6)5XA(9)
C1210Z823(6)5XA(9)
C1210Z104(6)5XA(9)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50/100 VOLT-BP-C1808 SIZE (MILITARY CKS53)
300.0
C1808Z301(3)(8)GA(9) M123A12BP(7)301(3)(10)
330.0
C1808Z331(3)(8)GA(9) M123A12BP(7)331(3)(10)
360.0
C1808Z361(3)(8)GA(9) M123A12BP(7)361(3)(10)
390.0
C1808Z391(3)(8)GA(9) M123A12BP(7)391(3)(10)
430.0
C1808Z431(3)(8)GA(9) M123A12BP(7)431(3)(10)
470.0
C1808Z471(3)(8)GA(9) M123A12BP(7)471(3)(10)
510.0
C1808Z511(3)(8)GA(9) M123A12BP(7)511(3)(10)
560.0
C1808Z561(3)(8)GA(9) M123A12BP(7)561(3)(10)
620.0
C1808Z621(3)(8)GA(9) M123A12BP(7)621(3)(10)
680.0
C1808Z681(3)(8)GA(9) M123A12BP(7)681(3)(10)
750.0
C1808Z751(3)(8)GA(9) M123A12BP(7)751(3)(10)
820.0
C1808Z821(3)(8)GA(9) M123A12BP(7)821(3)(10)
910.0
C1808Z911(3)(8)GA(9) M123A12BP(7)911(3)(10)
1,000.0
C1808Z102(3)(8)GA(9) M123A12BP(7)102(3)(10)
50/100 VOLT-BX-C1808 SIZE (MILITARY CKS53)
5,600.0
C1808Z562K(8)XA(9)
M123A12BX(7)562K(10)
6,800.0
C1808Z682K(8)XA(9)
M123A12BX(7)682K(10)
8,200.0
C1808Z822K(8)XA(9)
M123A12BX(7)822K(10)
10,000.0
C1808Z103K(8)XA(9)
M123A12BX(7)103K(10)
12,000.0
C1808Z123K(8)XA(9)
M123A12BX(7)123K(10)
15,000.0
C1808Z153K(8)XA(9)
M123A12BX(7)153K(10)
18,000.0
C1808Z183K(8)XA(9)
M123A12BX(7)183K(10)
22,000.0
C1808Z223K(8)XA(9)
M123A12BX(7)223K(10)
27,000.0
C1808Z273K(8)XA(9)
M123A12BX(7)273K(10)
33,000.0
C1808Z333K(8)XA(9)
M123A12BX(7)333K(10)
50 VOLT-BX-C1808 SIZE (MILITARY CKS53)
39,000.0
C1808Z393K5XA(9)
M123A12BXB393K(10)
47,000.0
C1808Z473K5XA(9)
M123A12BXB473K(10)
56,000.0
C1808Z563K5XA(9)
M123A12BXB563K(10)
68,000.0
C1808Z683K5XA(9)
M123A12BXB683K(10)
82,000.0
C1808Z823K5XA(9)
M123A12BXB823K(10)
100,000.0
C1808Z104K5XA(9)
M123A12BXB104K(10)
50 VOLT-BP-C2225 SIZE (MILITARY CKS54)
1,100.0
C2225Z112(3)5GA(9)
M123A13BPB112(3)(10)
1,200.0
C2225Z122(3)5GA(9)
M123A13BPB122(3)(10)
1,300.0
C2225Z132(3)5GA(9)
M123A13BPB132(3)(10)
1,500.0
C2225Z152(3)5GA(9)
M123A13BPB152(3)(10)
1,600.0
C2225Z162(3)5GA(9)
M123A13BPB162(3)(10)
1,800.0
C2225Z182(3)5GA(9)
M123A13BPB182(3)(10)
2,000.0
C2225Z202(3)5GA(9)
M123A13BPB202(3)(10)
2,200.0
C2225Z222(3)5GA(9)
M123A13BPB222(3)(10)
2,400.0
C2225Z242(3)5GA(9)
M123A13BPB242(3)(10)
2,700.0
C2225Z272(3)5GA(9)
M123A13BPB272(3)(10)
3,000.0
C2225Z302(3)5GA(9)
M123A13BPB302(3)(10)
3,300.0
C2225Z332(3)5GA(9)
M123A13BPB332(3)(10)
3,600.0
C2225Z362(3)5GA(9)
M123A13BPB362(3)(10)
3,900.0
C2225Z392(3)5GA(9)
M123A13BPB392(3)(10)
4,300.0
C2225Z432(3)5GA(9)
M123A13BPB432(3)(10)
4,700.0
C2225Z472(3)5GA(9)
M123A13BPB472(3)(10)
5,100.0
C2225Z512(3)5GA(9)
M123A13BPB512(3)(10)
5,600.0
C2225Z562(3)5GA(9)
M123A13BPB562(3)(10)
6,200.0
C2225Z622(3)5GA(9)
M123A13BPB622(3)(10)
6,800.0
C2225Z682(3)5GA(9)
M123A13BPB682(3)(10)
7,500.0
C2225Z752(3)5GA(9)
M123A13BPB752(3)(10)
8,200.0
C2225Z822(3)5GA(9)
M123A13BPB822(3)(10)
9,100.0
C2225Z912(3)5GA(9)
M123A13BPB912(3)(10)
10,000.0
C2225Z103(3)5GA(9)
M123A13BPB103(3)(10)
50 VOLT-BP-C2225 SIZE (MILITARY CKS54)
120,000.0
150,000.0
180,000.0
220,000.0
270,000.0
330,000.0
390,000.0
470,000.0
C2225Z124K5XA(9)
C2225Z154K5XA(9)
C2225Z184K5XA(9)
C2225Z224K5XA(9)
C2225Z274K5XA(9)
C2225Z334K5XA(9)
C2225Z394K5XA(9)
C2225Z474K5XA(9)
M123A13BXB124K(10)
M123A13BXB154K(10)
M123A13BXB184K(10)
M123A13BXB224K(10)
M123A13BXB274K(10)
M123A13BXB334K(10)
M123A13BXB394K(10)
M123A13BXB474K(10)
M123A11BXB333(6)(10)
M123A11BXB393(6)(10)
M123A11BXB473(6)(10)
M123A11BXB563(6)(10)
M123A11BXB683(6)(10)
M123A11BXB823(6)(10)
M123A11BXB104(6)(10)
To complete the KEMET part numbers, insert the following tolerance:
(1)
C = ±0.25pF; D = ±0.5pF
(2)
C = ±0.25pF; J = ±5%; K = ±10%
(3)
F = ±1%; J = ±5%; K = ±10%
(4)
B = ±0.1pF; C = ±0.25pF
(5)
B = ±0.1pF; C = 0.25pF; D = 0.50pF
(6)
K = ±10%; M =±20%
To complete the KEMET part numbers, insert the following voltage:
(7)
B = 50 volts; C = 100 volts
(8)
5 = 50 volts; 1 = 100 volts
To complete the KEMET part numbers, insert termination designation:
(9)
H = Nickel Guarded, Solder Coated (Sn60); L = 70/30 Tin/Lead Plated
(10) S = Nickel Guarded, Solder Coated (Sn60); Z = 70/30 Tin/Lead Plated
10
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIP/MIL-PRF-123 (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BP - C1206 SIZE (MILITARY CKS55)
1.0
C1206Z109(4)1GA(9) M123A21BPC1R0(4)(10)
1.1
C1206Z119(4)1GA(9) M123A21BPC1R1(4)(10)
1.2
C1206Z129(4)1GA(9) M123A21BPC1R2(4)(10)
1.3
C1206Z139(4)1GA(9) M123A21BPC1R3(4)(10)
1.5
C1206Z159(4)1GA(9) M123A21BPC1R5(4)(10)
1.6
C1206Z169(4)1GA(9) M123A21BPC1R6(4)(10)
1.8
C1206Z189(4)1GA(9) M123A21BPC1R8(4)(10)
2.0
C1206Z209(4)1GA(9) M123A21BPC2R0(4)(10)
2.2
C1206Z229(4)1GA(9) M123A21BPC2R2(4)(10)
2.4
C1206Z249(4)1GA(9) M123A21BPC2R4(4)(10)
2.7
C1206Z279(5)1GA(9) M123A21BPC2R7(5)(10)
3.0
C1206Z309(5)1GA(9) M123A21BPC3R0(5)(10)
3.3
C1206Z339(5)1GA(9) M123A21BPC3R3(5)(10)
3.6
C1206Z369(5)1GA(9) M123A21BPC3R6(5)(10)
3.9
C1206Z399(5)1GA(9) M123A21BPC3R9(5)(10)
4.3
C1206Z439(5)1GA(9)+ M123A21BPC4R3(5)(10)
4.7
C1206Z479(5)1GA(9) M123A21BPC4R7(5)(10)
5.1
C1206Z519(5)1GA(9) M123A21BPC5R1(5)(10)
5.6
C1206Z569(5)1GA(9) M123A21BPC5R6(5)(10)
6.2
C1206Z629(5)1GA(9) M123A21BPC6R2(5)(10)
6.8
C1206Z689(5)1GA(9) M123A21BPC6R8(5)(10)
7.5
C1206Z759(5)1GA(9) M123A21BPC7R5(5)(10)
8.2
C1206Z829(5)1GA(9) M123A21BPC8R2(5)(10)
9.1
C1206Z919(5)1GA(9) M123A21BPC9R1(5)(10)
10.0
C1206Z100(3)1GA(9) M123A21BPC100(3)(10)
11.0
C1206Z110(3)1GA(9) M123A21BPC110(3)(10)
12.0
C1206Z120(3)1GA(9) M123A21BPC120(3)(10)
13.0
C1206Z130(3)1GA(9) M123A21BPC130(3)(10)
15.0
C1206Z150(3)1GA(9) M123A21BPC150(3)(10)
16.0
C1206Z160(3)1GA(9) M123A21BPC160(3)(10)
18.0
C1206Z180(3)1GA(9) M123A21BPC180(3)(10)
20.0
C1206Z200(3)1GA(9) M123A21BPC200(3)(10)
24.0
C1206Z240(3)1GA(9) M123A21BPC240(3)(10)
27.0
C1206Z270(3)1GA(9) M123A21BPC270(3)(10)
33.0
C1206Z330(3)1GA(9) M123A21BPC330(3)(10)
36.0
C1206Z360(3)1GA(9) M123A21BPC360(3)(10)
39.0
C1206Z390(3)1GA(9) M123A21BPC390(3)(10)
43.0
C1206Z430(3)1GA(9) M123A21BPC430(3)(10)
47.0
C1206Z470(3)1GA(9) M123A21BPC470(3)(10)
51.0
C1206Z510(3)1GA(9) M123A21BPC510(3)(10)
56.0
C1206Z560(3)1GA(9) M123A21BPC560(3)(10)
62.0
C1206Z620(3)1GA(9) M123A21BPC620(3)(10)
68.0
C1206Z680(3)1GA(9) M123A21BPC680(3)(10)
75.0
C1206Z750(3)1GA(9) M123A21BPC750(3)(10)
82.0
C1206Z820(3)1GA(9) M123A21BPC820(3)(10)
91.0
C1206Z910(3)1GA(9) M123A21BPC910(3)(10)
100.0
C1206Z101(3)1GA(9) M123A21BPC101(3)(10)
110.0
C1206Z111(3)1GA(9) M123A21BPC111(3)(10)
120.0
C1206Z121(3)1GA(9) M123A21BPC121(3)(10)
130.0
C1206Z131(3)1GA(9) M123A21BPC131(3)(10)
150.0
C1206Z151(3)1GA(9) M123A21BPC151(3)(10)
160.0
C1206Z161(3)1GA(9) M123A21BPC161(3)(10)
180.0
C1206Z181(3)1GA(9) M123A21BPC181(3)(10)
200.0
C1206Z201(3)1GA(9) M123A21BPC201(3)(10)
220.0
C1206Z221(3)1GA(9) M123A21BPC221(3)(10)
240.0
C1206Z241(3)1GA(9) M123A21BPC241(3)(10)
270.0
C1206Z271(3)1GA(9) M123A21BPC271(3)(10)
300.0
C1206Z301(3)1GA(9) M123A21BPC301(3)(10)
330.0
C1206Z331(3)1GA(9) M123A21BPC331(3)(10)
360.0
C1206Z361(3)1GA(9) M123A21BPC361(3)(10)
390.0
C1206Z391(3)1GA(9) M123A21BPC391(3)(10)
430.0
C1206Z431(3)1GA(9) M123A21BPC431(3)(10)
470.0
C1206Z471(3)1GA(9) M123A21BPC471(3)(10)
510.0
C1206Z511(3)1GA(9) M123A21BPC511(3)(10)
560.0
C1206Z561(3)1GA(9) M123A21BPC561(3)(10)
620.0
C1206Z621(3)1GA(9) M123A21BPC621(3)(10)
680.0
C1206Z681(3)1GA(9) M123A21BPC681(3)(10)
750.0
C1206Z751(3)1GA(9) M123A21BPC751(3)(10)
820.0
C1206Z821(3)1GA(9) M123A21BPC821(3)(10)
910.0
C1206Z911(3)1GA(9) M123A21BPC911(3)(10)
1000.0
C1206Z102(3)1GA(9) M123A21BPC102(3)(10)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50 VOLT-BP-C1206 SIZE (MILITARY CKS55)
1,100.0
C1206Z112(3)5GA(9) M123A21BPB112(3)(10)
1,200.0
C1206Z122(3)5GA(9) M123A21BPB122(3)(10)
1,300.0
C1206Z132(3)5GA(9) M123A21BPB132(3)(10)
1,500.0
C1206Z152(3)5GA(9) M123A21BPB152(3)(10)
1,600.0
C1206Z162(3)5GA(9) M123A21BPB162(3)(10)
1,800.0
C1206Z182(3)5GA(9) M123A21BPB182(3)(10)
2,000.0
C1206Z202(3)5GA(9) M123A21BPB202(3)(10)
2,200.0
C1206Z222(3)5GA(9) M123A21BPB222(3)(10)
100 VOLT-BX-C1206 SIZE (MILITARY CKS55)
4,700.0
C1206Z472(6)1XA(9) M123A21BXC472(6)(10)
5,600.0
C1206Z562(6)1XA(9) M123A21BXC562(6)(10)
6,800.0
C1206Z682(6)1XA(9) M123A21BXC682(6)(10)
8,200.0
C1206Z822(6)1XA(9) M123A21BXC822(6)(10)
10,000.0
C1206Z103(6)1XA(9) M123A21BXC103(6)(10)
12,000.0
C1206Z123(6)1XA(9) M123A21BXC123(6)(10)
15,000.0
C1206Z153(6)1XA(9) M123A21BXC153(6)(10)
50 VOLT-BX-C1206 SIZE (MILITARY CKS55)
18,000.0
C1206Z183(6)5XA(9) M123A21BXB183(6)(10)
22,000.0
C1206Z223(6)5XA(9) M123A21BXB223(6)(10)
27,000.0
C1206Z273(6)5XA(9) M123A21BXB273(6)(10)
33,000.0
C1206Z333(6)5XA(9) M123A21BXB333(6)(10)
39,000.0
C1206Z393(6)5XA(9) M123A21BXB393(6)(10)
100 VOLT-BP-C1812 SIZE (MILITARY CKS56)
1,200.0
C1812Z122(3)1GA(9) M123A22BPC122(3)(10)
2,200.0
C1812Z222(3)1GA(9) M123A22BPC222(3)(10)
2,400.0
C1812Z242(3)1GA(9) M123A22BPC242(3)(10)
2,700.0
C1812Z272(3)1GA(9) M123A22BPC272(3)(10)
3,000.0
C1812Z302(3)1GA(9) M123A22BPC302(3)(10)
3,300.0
C1812Z332(3)1GA(9) M123A22BPC332(3)(10)
3,600.0
C1812Z362(3)1GA(9) M123A22BPC362(3)(10)
3,900.0
C1812Z392(3)1GA(9) M123A22BPC392(3)(10)
4,300.0
C1812Z432(3)1GA(9) M123A22BPC432(3)(10)
4,700.0
C1812Z472(3)1GA(9) M123A22BPC472(3)(10)
50 VOLT-BP-C1812 SIZE (MILITARY CKS56)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT-BP-C1825 SIZE (MILITARY CKS57)
3,900.0
C1825Z392(3)1GA(9) M123A23BPC392(3)(10)
4,700.0
C1825Z472(3)1GA(9) M123A23BPC472(3)(10)
5,100.0
C1825Z512(3)1GA(9) M123A23BPC512(3)(10)
5,600.0
C1825Z562(3)1GA(9) M123A23BPC562(3)(10)
6,200.0
C1825Z622(3)1GA(9) M123A23BPC622(3)(10)
6,800.0
C1825Z682(3)1GA(9) M123A23BPC682(3)(10)
7,500.0
C1825Z752(3)1GA(9) M123A23BPC752(3)(10)
8,200.0
C1825Z822(3)1GA(9) M123A23BPC822(3)(10)
9,100.0
C1825Z912(3)1GA(9) M123A23BPC912(3)(10)
10,000.0
C1825Z103(3)1GA(9) M123A23BPC103(3)(10)
50 VOLT-BP-C1812 SIZE (MILITARY CKS57)
11,000.0
C1825Z113(3)5GA(9) M123A23BPB113(3)(10)
12,000.0
C1825Z123(3)5GA(9) M123A23BPB123(3)(10)
13,000.0
C1825Z133(3)5GA(9) M123A23BPB133(3)(10)
15,000.0
C1825Z153(3)5GA(9) M123A23BPB153(3)(10)
16,000.0
C1825Z163(3)5GA(9) M123A23BPB163(3)(10)
18,000.0
C1825Z183(3)5GA(9) M123A23BPB183(3)(10)
20,000.0
C1825Z203(3)5GA(9) M123A23BPB203(3)(10)
22,000.0
C1825Z223(3)5GA(9) M123A23BPB223(3)(10)
100 VOLT-BX-C1825 SIZE (MILITARY CKS57)
56,000.0
C1825Z563(6)1XA(9) M123A23BXC563(6)(10)
68,000.0
C1825Z683(6)1XA(9) M123A23BXC683(6)(10)
82,000.0
C1825Z823(6)1XA(9) M123A23BXC823(6)(10)
100,000.0
C1825Z104(6)1XA(9) M123A23BXC104(6)(10)
120,000.0
C1825Z124(6)1XA(9) M123A23BXC124(6)(10)
150,000.0
C1825Z154(6)1XA(9) M123A23BXC154(6)(10)
50 VOLT-BX-C1825 SIZE (MILITARY CKS57)
180,000.0
C1825Z184(6)5XA(9) M123A23BXB184(6)(10)
220,000.0
C1825Z224(6)5XA(9) M123A23BXB224(6)(10)
270,000.0
C1825Z274(6)5XA(9) M123A23BXB274(6)(10)
330,000.0
C1825Z334(6)5XA(9) M123A23BXB334(6)(10)
390,000.0
C1825Z394(6)5XA(9) M123A23BXB394(6)(10)
470,000.0
C1825Z474(6)5XA(9) M123A23BXB474(6)(10)
5,100.0
C1812Z512(3)5GA(9) M123A22BPB512(3)(10)
5,600.0
C1812Z562(3)5GA(9) M123A22BPB562(3)(10)
6,200.0
C1812Z622(3)5GA(9) M123A22BPB622(3)(10)
6,800.0
C1812Z682(3)5GA(9) M123A22BPB682(3)(10)
7,500.0
C1812Z752(3)5GA(9) M123A22BPB752(3)(10)
8,200.0
C1812Z822(3)5GA(9) M123A22BPB822(3)(10)
9,100.0
C1812Z912(3)5GA(9) M123A22BPB912(3)(10)
10,000.0
C1812Z103(3)5GA(9) M123A22BPB103(3)(10)
100 VOLT-BX-C1812 SIZE (MILITARY CKS56)
27,000.0
C1812Z273(6)1XA(9) M123A22BXC273(6)(10)
33,000.0
C1812Z333(6)1XA(9) M123A22BXC333(6)(10)
39,000.0
C1812Z393(6)1XA(9) M123A22BXC393(6)(10)
47,000.0
C1812Z473(6)1XA(9) M123A22BXC473(6)(10)
56,000.0
C1812Z563(6)1XA(9) M123A22BXC563(6)(10)
50 VOLT-BX-C1812 SIZE (MILITARY CKS56)
100,000.0
120,000.0
150,000.0
180,000.0
C1812Z104(6)5XA(9)
C1812Z124(6)5XA(9)
C1812Z154(6)5XA(9)
C1812Z184(6)5XA(9)
M123A22BXB104(6)(10)
M123A22BXB124(6)(10)
M123A22BXB154(6)(10)
M123A22BXB184(6)(10)
To complete the KEMET part numbers, insert the following tolerance:
(1)
C = ±0.25pF; D = ±0.5pF
(2)
C = ±0.25pF; J = ±5%; K = ±10%
(3)
F = ±1%; J = ±5%; K = ±10%
(4)
B = ±0.1pF; C = ±0.25pF
(5)
B = ±0.1pF; C = 0.25pF; D = 0.50pF
(6)
K = ±10%; M =±20%
To complete the KEMET part numbers, insert the following voltage:
(7)
B = 50 volts; C = 100 volts
(8)
5 = 50 volts; 1 = 100 volts
To complete the KEMET part numbers, insert termination designation:
(9)
H = Nickel Guarded, Solder Coated (Sn60); L = 70/30 Tin/Lead Plated
(10) S = Nickel Guarded, Solder Coated (Sn60); Z = 70/30 Tin/Lead Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
11
CERAMIC HIGH RELIABILITY CAPACITORS
CERAMIC HIGH RELIABILITY PRODUCTS
Ceramic Chips, Radial Molded
KEMET Electronics Corporation has been known for
many years as the leader in the ceramic high reliability products. KEMET produces high reliability
monolithic ceramic capacitors under tightly-controlled manufacturing procedures. These capacitors
achieve “State of the Art” performance by virtue of
careful materials selection, conservative design
rules, motivational training of employees, and
scrupulous inspection of all processes as well as the
finished product. KEMET not only manufactures its
own high reliability ceramic capacitor (GR900),
KEMET also manufactures MIL-PRF-123 product
which is built to the highest military standard in the
industry today.
BASIC REQUIREMENTS FOR KEMET’S
HIGH RELIABILITY
PRODUCTS ARE AS FOLLOWS:
1. Selected Raw Materials: All raw materials are
selected for characteristics known to produce the
finest quality capacitors exhibiting the best electrical
parameters and physical integrity. Materials traceability is maintained throughout the manufacturing
process.
2. Batch Homogeneity: Production is under batch
control. Each batch is homogeneous with respect to
materials, design and processing conditions.
3. Clean Room Processing: All processes sensitive
to particulate contamination take place in a clean
room environment.
4. Special Designs: Special design considerations
such as dielectric thickness are strictly enforced.
Only C0G (BP) and X7R (BX) temperature characteristics are made.
5. Destructive Physical Analysis (DPA, or
Cross-Sectioning): All batches are sampled using
EIA-469 as a minimum requirement. The samples
remain on file and DPA Reports are shipped with the
capacitors.
6. C-SAM (C-Mode Surface Acoustical
Microscopy): Optional 100% screening may be performed using ultrasonic energy to detect voids or
delaminations. Screened lots must pass a final sample
DPA.
7. Batch Performance Monitoring: All production
batches are tested to generate electrical characteristics. Batches which show anomalous characteristics
are rejected.
8. Special Customer Requirements: Many special
2
requirements such as serialization, DPA samples,
X-Ray plates, and special packaging can be accommodated.
9. Document Applicable: The high reliability product is implemented through various internal documents under revision control. The Manufacturing
Instructions provide detailed descriptions of all operations and delineate requirements for process control and product performance at various points in the
process flow. Inspector Operating Documents
describe test procedures and sampling plans for
inspection of raw materials, in-process material and
finished product. Raw material specifications
describe physical and chemical characteristics as
well as the packaging and labeling needed to preserve characteristics and identity. Customer specifications are internal documents applicable only to
products manufactured and inspected to requirements of individual customers; in effect, these documents translate customer drawings into modifications of the specified portions of KEMET standard
procedures.
The Quality System in total is controlled by the
KEMET Quality Manual and by various Quality
Operating Documents. All documents, and revisions
thereto, bear specified approval signatures.
DETAILED SPECIFICATION:
Temperature Characteristics
Electrical stability with respect to temperature and
voltage is related inversely to the packaging efficiency (capacitance X voltage in a given case size).
C0G (BP) is made from ceramic materials which are
not ferroelectric, yielding superior stability but low
packaging efficiency. X7R (BX) is made from materials which are ferroelectric, such as barium titanate,
yielding a stable and high packaging efficiency.
Aging
If the temperature of a barium titanate dielectric is
lowered after an excursion above its curie point, the
ceramic crystalline structure gradually reverts to the
tetragonal form typical of the low temperature conditions. The reversion requires a considerable length
of time, and its effect in practical capacitors has
become known as “Aging”. The rate of aging is
affected by both the temperature and the applied
voltage experienced by the capacitor. The COG (BP)
formulation is non-ferroelectric and does not exhibit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC HIGH RELIABILITY CAPACITORS
aging. The X7R (BX) formulation exhibits its own
characteristic aging rate which describes a decrease
in capacitance versus time. The capacitance of the
X7R dielectric decreases approximately 1.0% during each decade of hours following a return to temperatures below the curie point. In other words,
capacitance will decrease 1.0% between 1 and 10
hours, another 1.0% between 10 and 100 hours,
another 1.0% between 100 and 1000 hours, etc.
KEMET takes into consideration the aging rate by
designing capacitors to fall within the specified
capacitance tolerance at 1000 hours. Inasmuch as
the aging rate is exponential, very little change in
capacitance will take place after 1000 hours.
PERFORMANCE CHARACTERISTICS
General Information
Working Voltage:
C0G (BP) - 50,100 & 200 volts
X7R (BX) - 50,100 & 200 volts
Voltage Effects
Ferroelectric materials are also affected by applied
voltage, both alternating and direct. Low values of
voltage produce a slight increase in capacitance and
dissipation factor. Higher voltages cause a decrease
in capacitance. Typically, capacitors with X7R characteristic decrease in capacitance by approximately
10% when rated DC voltage is applied.
A small portion of the decrease in capacitance by
the application of a high DC voltage persists after the
voltage is removed and then disappears gradually.
Electrical
Capacitance: Within specified tolerance when
measured with 1 volt RMS @ 1 kHz (1000pF or less
@ 1 MHz for C0G (BP)).
Customer Testing
Because of temperature and voltage effects, caution
must be used in establishing a testing sequence for
ceramic capacitors. Insulation resistance measurements and tests of dielectric withstanding voltage
both require application of high DC voltage and
cause temporary changes in capacitance. These
tests, therefore, should not be conducted until
capacitance testing is completed. Alternatively, the
capacitors can be “de-aged” at high temperature as
described above. A stabilization time at room ambient of 24 hours should be used after de-aging.
See F-3101 Catalog for more details.
Temperature Characteristics:
C0G (BP): 0 ±30 ppm/°C from -55°C to +125°C.
(Limits widen below 20 pF.)
X7R (BX): ±15%; from -55°C to +125°C.
Capacitance Tolerance:
C0G (BP): C - ±0.25pF; D - ±0.5pF; F - ±1%;
G- ±2%; J- ±5%; K- ±10%; M- ±20%.
X7R (BX): J - ±5%; K - ±10%; M - ±20%.
Dissipation Factor:
25°C @ 1 kHz (1000 pF or less at 1 MHz for
C0G (BP)).
C0G (BP): 0.15% maximum
X7R (BX): 2.5% maximum
Insulation Resistance:
After 2 minutes electrification:
at 25°C and rated voltage:
C0G (BP): l00 GΩ or (1000 megohm
X µF), whichever is less.
X7R (BX): l00 GΩ or (1000 megohm
X µF), whichever is less.
at 125°C and rated voltage:
C0G (BP): l0 GΩ or (100 megohm
X µF), whichever is less.
X7R (BX): l0 GΩ or (100 megohm
X µF), whichever is less.
Dielectric Withstanding Voltage: 250% of
rated voltage for 5 seconds with current limited to
50 MA at 25°C.
Aging Rate: % Delta Cap/Decade Hour, Typical
C0G (BP): 0%
X7R (BX): 1.0%
IMPORTANT NOTICE
KEMET Electronics Corporation disclaims all warranties, whether express, implied, or statutory as to any manner whatsoever, including the condition of the equipment, its compatibility with specific requirements, its merchantability, or fitness for any
particular purpose which extend beyond the description on the face hereof.
Furthermore, under no circumstances shall KEMET Electronics Corporation be liable for consequential, special, incidental
or indirect damages resulting from the use or handling of this product.
Finally, KEMET Electronics Corporation does not assume any responsibility for the correctness of the information contained
in this catalog. All design characteristics, specifications, tolerances, and the like are subject to change without notice.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
3
CERAMIC HIGH RELIABILITY CAPACITORS
MIL-PRF-123/GR900
TYPICAL PERFORMANCE CURVES
4
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC HIGH RELIABILITY MOLDED & CHIPS
GENERAL INFORMATION MIL-PRF-123
INTRODUCTION
10. Radiographic Inspection (leaded devices only) (100% of lot).
MIL-PRF-123 specification covers the general requirements for high
reliability, general purpose (BX) and temperature stable (BP) ceramic
dielectric fixed capacitors for space, missile, and other high reliability
applications. Capacitors covered by MIL-PRF-123 may be used in
critical frequency determining applications, timing circuits, and other
applications where absolute stability is required (BP) and in applications where appreciable variations in capacitance with respect to
temperature, voltage, frequency, and life can be tolerated (BX).
11. Visual Inspection per MIL-PRF-123 criteria.
SCREENING TESTS
Each lot has the following In-Process Inspections performed:
1. 100% C-SAM (C-Mode Surface Acoustical Microscopy)
2. In-Process Destructive Physical Analysis
3. 100% visual inspection at a minimum of 10X magnification
4. Pre-encapsulation terminal strength evaluation (leaded devices
only). Radial leaded capacitors must meet a minimum lead pull
of 1.8 kg (4.0 lbs.).
The following Group A shall be performed on each lot:
1. Thermal Shock—Performed in accordance to MIL-STD-202,
Method 107, Condition A, with step 3 being 125°C. Number of
cycles shall be 20 (100% of lot).
2. Voltage Conditioning—The voltage conditioning shall consist
of applying twice the rated voltage to the units at the maximum
rated temperature of 125°C for a minimum of 168 hours and a
maximum of 264 hours. The voltage conditioning may be terminated at any time during 168 hours to 264 hours time interval
that confirmed failures meet the requirements for the PDA during the last 48 hours listed in Table I below (100% of lot).
Optional Voltage Conditioning (Accelerated Voltage
Conditioning)—AII conditions of the standard voltage conditioning apply with the exception of the increased voltage and the
decreased test time. (Refer to Mil-PRF-123 for formula.)
*Step 5 is performed on chips at this point (100% of lot).
3. Dielectric Withstanding Voltage 250% of the dc rated voltage
at 25°C (100% of lot).
4. Insulation Resistance—The 25°C measurement with rated
voltage applied shall be the lesser of 100 GΩ or 1000 megohmmicrofarads (100% of lot).
*5.Insulation Resistance—The 125°C measurement with rated
voltage applied shall be the lesser of 10 GΩ or 100 megohmmicrofarads (1000% of lot). For chips 125°C IR is performed
prior to step 3 above.
6. Storage at 150°C for 2 hours minimum without voltage applied
followed by a 12-hour minimum stabilization period (temperature characteristic BX only).
7. Capacitance must be within specified tolerance at 25°C (100%
of lot). Cap Exclusion: Capacitance values no more than 5% or
.5 pF, whichever is greater, for BX characteristics or 1% or .3 pF,
whichever is greater, for BP characteristics beyond specified tolerance limit shall be removed from the lot but shall not be considered defective for determination of the PDA.
8. Dissipation Factor shall not exceed 2.5% for X dielectric,
0.15% for G dielectric at 25°C (100% of lot).
9. Percent Defective Allowable (PDA). The following table lists
the PDA requirements for MIL-PRF-123 Group A:
KEMET
STYLE
C052Z
C062Z
C512Z
C0805Z
C1210Z
C1808Z
C2225Z
C1206Z
C1812Z
C1825Z
MIL
STYLE
CKS05
CKS06
CKS07
CKS51
CKS52
CKS53
CKS54
CKS55
CKS56
CKS57
TABLE I
BURN IN PDA
LAST 48 HOURS
1 unit or 0.1%
1 unit or 0.2%
1 unit or 0.2%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
1 unit or 0.1%
PDA
OVERALL
3%
5%
5%
3%
3%
3%
3%
3%
3%
3%
12. Destructive Physical Analysis per EIA-469 and MIL-PRF-123.
SAMPLE TESTS
The following Group B tests shall be performed on samples from
each lot, which have been subjected to and have passed Group A
inspection.
1. Thermal Shock—Performed in accordance to MIL-STD-202,
Method 107, Condition A, with step 3 being 125°C. Number of
cycles shall be 100.
2. Life Test per MIL-5TD-202, Method 108. Test temperature and
tolerance is +125°C +4, -0°C. Capacitors shall be subjected to
2X rated voltage for 1000 hours.
3. Humidity, steady state, low voltage per MIL-STD-202,
Method 103, Condition A. Capacitors shall be subjected to an
environment of 85°C with 85% relative humidity for 240 hours
minimum. Cycling shall not be performed. A dc potential of 1.3
±0.25 volts shall be applied continuously through a 100,000
ohm resistance to each device under test. At completion, 25°C
IR and Cap are read.
4. Voltage-temperature limits—Capacitance is measured at various temperatures (-55°C to +125°C) with and without rated
voltage.
5. Moisture Resistance per MIL-STD-202, Method 106. There
shall be 20 continuous cycles. During the first 10 cycles only, a
dc potential of 50 volts shall be applied across the capacitor terminals. Once each day, a check shall be performed to determine whether a capacitor has shorted. Vibration cycle of MILSTD-202, Method 106, Step 7b shall not be performed. Upon
completion of MIL-STD-202, Method 106, Step 6 of the final
cycle, capacitors shall be measured for capacitance, dielectric
withstanding voltage and insulation resistance.
The following Group C tests shall be performed on samples selected
from lots that have passed Group A and have been submitted for
Group B inspection. Samples shall be selected every two months.
1. Terminal Strength
2. Solderability
3. Resistance to Soldering Heat
4. Solvent Resistance (Leaded devices only)
All lots shipped must have been subjected to and passed Group A
and B testing.
STANDARD PACKAGING FOR
MIL-PRF-123 IS AS FOLLOWS:
C052Z
C062Z
C512Z
tray
tray
1 pc. per bag
C0805Z
C1206Z
C1210Z
C1808Z
C1812Z
C1825Z
C2225Z
chip
chip
chip
chip
chip
chip
chip
tray
tray
tray
tray
tray
tray
tray
DATA PACKAGE
A data package is sent with each shipment which contains:
1. Summary of Group A testing
2. Summary of Group B testing
3. Group B Variables Test Data
4. Lead Pull Data (Leaded Devices Only)
5. Final Destructive Physical Analysis Report
6. Certificate of Compliance stating that the ceramic capacitors
supplied meet all the requirements of MIL-PRF-123, the applicable slash sheet(s) and all associated documents.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
5
CERAMIC MOLDED/RADIAL — MIL-PRF-123
GENERAL INFORMATION
CAPACITOR OUTLINE DRAWINGS - (RADIAL LEADS)
DIMENSIONS — INCHES & (MILLIMETERS)
CASE
SIZE
MILITARY
EQUIVALENT
STYLES
H
HEIGHT
L
LENGTH
W
WIDTH
S
LEAD
SPACING
C052
CKS05
.190 ± .010 (4.83 ± .25)
.190 ± .010 (4.83 ± .25)
.090 ± .010 (2.29 ± .25)
.200 ± .015 (5.08 ± .38)
C062
CKS06
.290 ± .010 (7.37 ±.25)
.290 ± .010 (7.37 ±.25)
.090 ± .010 (2.29 ± .25)
.200 ± .015 (5.08 ± .38)
C512
CKS07
.480 ± .020 (12.19 ± .51)
.480 ± .020 (12.19 ± .51)
.140 ± .010 (3.56 ± .25)*
.400 ± .020 (10.16 ± .51)
*0.200 maximum for some capacitance values.
ORDERING INFORMATION
KEMET PART NUMBER
C 052 Z 102 K 5 G 5 C A
FAILURE RATE
CERAMIC
CASE SIZE
A—Standard — Not applicable
LEAD MATERIAL
Radial
C052
C062
C512
C—Standard
Radial: solder coated copper
INTERNAL CONSTRUCTION
SPECIFICATION
5—Standard
Z — Mil-PRF-123
CAPACITANCE
In picofarad code
TEMPERATURE CHARACTERISTIC
CAPACITANCE TOLERANCE
Standard
C— ±0.25 pF
J— ±5%
D— ±0.5 pF
K— ±10%
F— ±1%
WORKING VOLTAGE
5 — 50
1 — 100
6
Capacitance Change With Temp.
Measured
Measured
Without
With Bias
Temp.
DC Bias
(Rated)
Range, °C
Voltage
Voltage
KEMET
Designator
Military
Equivalent
G
(Ultra
Stable)
BP
-55 to
+125
±30
ppm/°C
±30
ppm/°C
BX
-55 to
+125
±15%
+15%
-25%
X
(Stable)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/RADIAL — MIL-PRF-123 (BP DIELECTRIC)
MIL-PRF-123 MILITARY PART NUMBER
M123 A 01 BX B 103 K C
TERMINATION
Molded
C — Solder-coated copper (radial)
MILITARY
SPECIFICATION
NUMBER
TOLERANCE
C—±0.25pF J—±5%
D—±0.5pF
K—±10%
F—±1%
MODIFICATION LETTER
Indicates the latest characteristics
of the part in the specification sheet.
CAPACITANCE
In picofarad code
MIL-PRF-123 SLASH SHEET NUMBER
Slash
Sheet #
01
02
03
KEMET
Style
C052
C062
C512
Mil-C-123
Style
CKS05
CKS06
CKS07
VOLTAGE
B=50 C=100
VOLTAGE-TEMPERATURE CHARACTERISTICS
Capacitance Change With Temp.
KEMET
Designator
G
(Ultra
Stable)
X
(Stable)
Military
Equivalent
Temp.
Range, °C
Measured
Measured
Without DC Bias (Rated) With Bias
Voltage
Voltage
BP
-55 to
+125
±30
ppm/°C
±30
ppm/°C
BX
-55 to
+125
±15%
+15%
-25%
RATINGS & PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BP - C052 SIZE (MILITARY CKS05)
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
C052Z479(1)1G5CA
C052Z519(1)1G5CA
C052Z569(1)1G5CA
C052Z629(1)1G5CA
C052Z689(1)1G5CA
C052Z759(1)1G5CA
C052Z829(1)1G5CA
C052Z919(1)1G5CA
C052Z100(2)1G5CA
C052Z110(2)1G5CA
C052Z120(2)1G5CA
C052Z130(2)1G5CA
C052Z150(2)1G5CA
C052Z160(2)1G5CA
C052Z180(2)1G5CA
C052Z200(2)1G5CA
C052Z220(2)1G5CA
C052Z240(2)1G5CA
C052Z270(3)1G5CA
C052Z300(3)1G5CA
C052Z330(3)1G5CA
C052Z360(3)1G5CA
C052Z390(3)1G5CA
C052Z430(3)1G5CA
C052Z470(3)1G5CA
C052Z510(3)1G5CA
C052Z560(3)1G5CA
C052Z620(3)1G5CA
C052Z680(3)1G5CA
C052Z750(3)1G5CA
C052Z820(3)1G5CA
C052Z910(3)1G5CA
C052Z101(3)1G5CA
C052Z111(3)1G5CA
C052Z121(3)1G5CA
C052Z131(3)1G5CA
C052Z151(3)1G5CA
C052Z161(3)1G5CA
C052Z181(3)1G5CA
C052Z201(3)1G5CA
C052Z221(3)1G5CA
C052Z241(3)1G5CA
M123A01BPC4R7(1)C
M123A01BPC5R1(1)C
M123A01BPC5R6(1)C
M123A01BPC6R2(1)C
M123A01BPC6R8(1)C
M123A01BPC7R5(1)C
M123A01BPC8R2(1)C
M123A01BPC9R1(1)C
M123A01BPC100(2)C
M123A01BPC110(2)C
M123A01BPC120(2)C
M123A01BPC130(2)C
M123A01BPC150(2)C
M123A01BPC160(2)C
M123A01BPC180(2)C
M123A01BPC200(2)C
M123A01BPC220(2)C
M123A01BPC240(2)C
M123A01BPC270(3)C
M123A01BPC300(3)C
M123A01BPC330(3)C
M123A01BPC360(3)C
M123A01BPC390(3)C
M123A01BPC430(3)C
M123A01BPC470(3)C
M123A01BPC510(3)C
M123A01BPC560(3)C
M123A01BPC620(3)C
M123A01BPC680(3)C
M123A01BPC750(3)C
M123A01BPC820(3)C
M123A01BPC910(3)C
M123A01BPC101(3)C
M123A01BPC111(3)C
M123A01BPC121(3)C
M123A01BPC131(3)C
M123A01BPC151(3)C
M123A01BPC161(3)C
M123A01BPC181(3)C
M123A01BPC201(3)C
M123A01BPC221(3)C
M123A01BPC241(3)C
CAP.
pF
C052Z271(3)5G5CA
C052Z301(3)5G5CA
C052Z331(3)5G5CA
C052Z361(3)5G5CA
C052Z391(3)5G5CA
C052Z431(3)5G5CA
C052Z471(3)5G5CA
C052Z511(3)5G5CA
M123A01BPB271(3)C
M123A01BPB301(3)C
M123A01BPB331(3)C
M123A01BPB361(3)C
M123A01BPB391(3)C
M123A01BPB431(3)C
M123A01BPB471(3)C
M123A01BPB511(3)C
MIL-PRF-123
PART NUMBER
50 VOLT - BP - C052 SIZE (MILITARY CKS05) (Cont’d)
560
620
680
750
820
910
1,000
1,100
1,200
1,300
1,500
1,600
1,800
2,000
2,200
2,400
2,700
C052Z561(3)5G5CA
C052Z621(3)5G5CA
C052Z681(3)5G5CA
C052Z751(3)5G5CA
C052Z821(3)5G5CA
C052Z911(3)5G5CA
C052Z102(3)5G5CA
C052Z112(3)5G5CA
C052Z122(3)5G5CA
C052Z132(3)5G5CA
C052Z152(3)5G5CA
C052Z162(3)5G5CA
C052Z182(3)5G5CA
C052Z202(3)5G5CA
C052Z222(3)5G5CA
C052Z242(3)5G5CA
C052Z272(3)5G5CA
M123A01BPB561(3)C
M123A01BPB621(3)C
M123A01BPB681(3)C
M123A01BPB751(3)C
M123A01BPB821(3)C
M123A01BPB911(3)C
M123A01BPB102(3)C
M123A01BPB112(3)C
M123A01BPB122(3)C
M123A01BPB132(3)C
M123A01BPB152(3)C
M123A01BPB162(3)C
M123A01BPB182(3)C
M123A01BPB202(3)C
M123A01BPB222(3)C
M123A01BPB242(3)C
M123A01BPB272(3)C
100 VOLT - BP - C062 SIZE (MILITARY CKS06)
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1,000
1,100
1,200
1,300
1,500
1,600
1,800
2,000
2,200
2,400
50 VOLT - BP - C052 SIZE (MILITARY CKS05)
270
300
330
360
390
430
470
510
KEMET
PART NUMBER
C062Z271(3)1G5CA
C062Z301(3)1G5CA
C062Z331(3)1G5CA
C062Z361(3)1G5CA
C062Z391(3)1G5CA
C062Z431(3)1G5CA
C062Z471(3)1G5CA
C062Z511(3)1G5CA
C062Z561(3)1G5CA
C062Z621(3)1G5CA
C062Z681(3)1G5CA
C062Z751(3)1G5CA
C062Z821(3)1G5CA
C062Z911(3)1G5CA
C062Z102(3)1G5CA
C062Z112(3)1G5CA
C062Z122(3)1G5CA
C062Z132(3)1G5CA
C062Z152(3)1G5CA
C062Z162(3)1G5CA
C062Z182(3)1G5CA
C062Z202(3)1G5CA
C062Z222(3)1G5CA
C062Z242(3)1G5CA
M123A02BPC271(3)C
M123A02BPC301(3)C
M123A02BPC331(3)C
M123A02BPC361(3)C
M123A02BPC391(3)C
M123A02BPC431(3)C
M123A02BPC471(3)C
M123A02BPC511(3)C
M123A02BPC561(3)C
M123A02BPC621(3)C
M123A02BPC681(3)C
M123A02BPC751(3)C
M123A02BPC821(3)C
M123A02BPC911(3)C
M123A02BPC102(3)C
M123A02BPC112(3)C
M123A02BPC122(3)C
M123A02BPC132(3)C
M123A02BPC152(3)C
M123A02BPC162(3)C
M123A02BPC182(3)C
M123A02BPC202(3)C
M123A02BPC222(3)C
M123A02BPC242(3)C
50 VOLT - BP - C062 SIZE (MILITARY CKS06)
2,700
3,000
3,300
3,600
3,900
4,300
4,700
C062Z272(3)5G5CA
C062Z302(3)5G5CA
C062Z332(3)5G5CA
C062Z362(3)5G5CA
C062Z392(3)5G5CA
C062Z432(3)5G5CA
C062Z472(3)5G5CA
M123A02BPB272(3)C
M123A02BPB302(3)C
M123A02BPB332(3)C
M123A02BPB362(3)C
M123A02BPB392(3)C
M123A02BPB432(3)C
M123A02BPB472(3)C
To complete the part numbers, insert the following tolerances: (1) C, ±0.25pF; D. ±0.5pF (2) C, ±0.25pF; J, ±5%; K, ±10% (3) F, ±1%; J, ±5%; K, ±10%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
7
CERAMIC MOLDED/RADIAL — MIL-PRF-123 (BP/BX DIELECTRIC)
RATINGS & PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BP - C512 SIZE (MILITARY CKS07)
2,700
3,000
3,300
3,600
3,900
4,300
4,700
5,100
5,600
6,200
6,800
7,500
8,200
9,100
10,000
C512Z272(3)1G5CA
C512Z302(3)1G5CA
C512Z332(3)1G5CA
C512Z362(3)1G5CA
C512Z392(3)1G5CA
C512Z432(3)1G5CA
C512Z472(3)1G5CA
C512Z512(3)1G5CA
C512Z562(3)1G5CA
C512Z622(3)1G5CA
C512Z682(3)1G5CA
C512Z752(3)1G5CA
C512Z822(3)1G5CA
C512Z912(3)1G5CA
C512Z103(3)1G5CA
M123A03BPC272(3)C
M123A03BPC302(3)C
M123A03BPC332(3)C
M123A03BPC362(3)C
M123A03BPC392(3)C
M123A03BPC432(3)C
M123A03BPC472(3)C
M123A03BPC512(3)C
M123A03BPC562(3)C
M123A03BPC622(3)C
M123A03BPC682(3)C
M123A03BPC752(3)C
M123A03BPC822(3)C
M123A03BPC912(3)C
M123A03BPC103(3)C
50 VOLT - BP - C512 SIZE (MILITARY CKS07)
11,000
12,000
13,000
15,000
16,000
18,000
20,000
22,000
24,000
27,000
30,000
33,000
36,000
39,000
43,000
47,000
51,000
56,000
62,000
68,000
75,000
82,000
91,000
100,000
CAP.
pF
C512Z113(3)5G5CA
C512Z123(3)5G5CA
C512Z133(3)5G5CA
C512Z153(3)5G5CA
C512Z163(3)5G5CA
C512Z183(3)5G5CA
C512Z203(3)5G5CA
C512Z223(3)5G5CA
C512Z243(3)5G5CA
C512Z273(3)5G5CA
C512Z303(3)5G5CA
C512Z333(3)5G5CA
C512Z363(3)5G5CA
C512Z393(3)5G5CA
C512Z433(3)5G5CA
C512Z473(3)5G5CA
C512Z513(3)5G5CA
C512Z563(3)5G5CA
C512Z623(3)5G5CA
C512Z683(3)5G5CA
C512Z753(3)5G5CA
C512Z823(3)5G5CA
C512Z913(3)5G5CA
C512Z104(3)5G5CA
KEMET
PART NUMBER
M123A03BPB113(3)C
M123A03BPB123(3)C
M123A03BPB133(3)C
M123A03BPB153(3)C
M123A03BPB163(3)C
M123A03BPB183(3)C
M123A03BPB203(3)C
M123A03BPB223(3)C
M123A03BPB243(3)C
M123A03BPB273(3)C
M123A03BPB303(3)C
M123A03BPB333(3)C
M123A03BPB363(3)C
M123A03BPB393(3)C
M123A03BPB433(3)C
M123A03BPB473(3)C
M123A03BPB513(3)C
M123A03BPB563(3)C
M123A03BPB623(3)C
M123A03BPB683(3)C
M123A03BPB753(3)C
M123A03BPB823(3)C
M123A03BPB913(3)C
M123A03BPB104(3)C
MIL-PRF-123
PART NUMBER
100 VOLT - BX - C052 SIZE (MILITARY CKS05)
270
330
390
470
560
680
820
1,000
1,200
1,500
1,800
2,200
2,700
3,300
3,900
4,700
C052Z271K1X5CA
C052Z331K1X5CA
C052Z391K1X5CA
C052Z471K1X5CA
C052Z561K1X5CA
C052Z681K1X5CA
C052Z821K1X5CA
C052Z102K1X5CA
C052Z122K1X5CA
C052Z152K1X5CA
C052Z182K1X5CA
C052Z222K1X5CA
C052Z272K1X5CA
C052Z332K1X5CA
C052Z392K1X5CA
C052Z472K1X5CA
M123A01BXC271KC
M123A01BXC331KC
M123A01BXC391KC
M123A01BXC471KC
M123A01BXC561KC
M123A01BXC681KC
M123A01BXC821KC
M123A01BXC102KC
M123A01BXC122KC
M123A01BXC152KC
M123A01BXC182KC
M123A01BXC222KC
M123A01BXC272KC
M123A01BXC332KC
M123A01BXC392KC
M123A01BXC472KC
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BX - C062 SIZE (MILITARY CKS06)
5,600
6,800
8,200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
C062Z562K1X5CA
C062Z682K1X5CA
C062Z822K1X5CA
C062Z103K1X5CA
C062Z123K1X5CA
C062Z153K1X5CA
C062Z183K1X5CA
C062Z223K1X5CA
C062Z273K1X5CA
C062Z333K1X5CA
C062Z393K1X5CA
C062Z473K1X5CA
C062Z563K1X5CA
C062Z683K1X5CA
C062Z823K1X5CA
C062Z104K1X5CA
M123A02BXC562KC
M123A02BXC682KC
M123A02BXC822KC
M123A02BXC103KC
M123A02BXC123KC
M123A02BXC153KC
M123A02BXC183KC
M123A02BXC223KC
M123A02BXC273KC
M123A02BXC333KC
M123A02BXC393KC
M123A02BXC473KC
M123A02BXC563KC
M123A02BXC683KC
M123A02BXC823KC
M123A02BXC104KC
50 VOLT - BX - C062 SIZE (MILITARY CKS06)
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
470,000
560,000
680,000
820,000
1,000,000
CAP.
pF
C062Z563K5X5CA
C062Z683K5X5CA
C062Z823K5X5CA
C062Z104K5X5CA
C062Z124K5X5CA
C062Z154K5X5CA
C062Z184K5X5CA
C062Z224K5X5CA
C062Z274K5X5CA
C062Z334K5X5CA
C062Z394K5X5CA
C062Z474K5X5CA
C062Z564K5X5CA
C062Z684K5X5CA
C062Z824K5X5CA
C062Z105K5X5CA
M123A02BXB563KC
M123A02BXB683KC
M123A02BXB823KC
M123A02BXB104KC
M123A02BXB124KC
M123A02BXB154KC
M123A02BXB184KC
M123A02BXB224KC
M123A02BXB274KC
M123A02BXB334KC
M123A02BXB394KC
M123A02BXB474KC
M123A02BXB564KC
M123A02BXB684KC
M123A02BXB824KC
M123A02BXB105KC
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BX - C512 SIZE (MILITARY CKS07)
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
470,000
C512Z563K1X5CA
C512Z683K1X5CA
C512Z823K1X5CA
C512Z104K1X5CA
C512Z124K1X5CA
C512Z154K1X5CA
C512Z184K1X5CA
C512Z224K1X5CA
C512Z274K1X5CA
C512Z334K1X5CA
C512Z394K1X5CA
C512Z474K1X5CA
M123A03BXC563KC
M123A03BXC683KC
M123A03BXC823KC
M123A03BXC104KC
M123A03BXC124KC
M123A03BXC154KC
M123A03BXC184KC
M123A03BXC224KC
M123A03BXC274KC
M123A03BXC334KC
M123A03BXC394KC
M123A03BXC474KC
50 VOLT - BX - C512 SIZE (MILITARY CKS07)
560,000
680,000
820,000
1,000,000
C512Z564K5X5CA
C512Z684K5X5CA
C512Z824K5X5CA
C512Z105K5X5CA
M123A03BXB564KC
M123A03BXB684KC
M123A03BXB824KC
M123A03BXB105KC
To complete the part numbers, insert the following tolerances: (1) C, ±0.25pF;
D, ±0.5pF (2) C, ±0.25pF; J, ±5%; K, ±10% (3) F, ±1%; J, ±5%; K, ±10%
50 VOLT - BX - C052 SIZE (MILITARY CKS05)
5,600
6,800
8,200
10,000
C052Z562K5X5CA
C052Z682K5X5CA
C052Z822K5X5CA
C052Z103K5X5CA
M123A01BXB562KC
M123A01BXB682KC
M123A01BXB822KC
M123A01BXB103KC
MARKING INFORMATION
M123A
01BPC
4R7CC
JAN
XXXX*
31433
8
C052Z
MIL-PRF-123
Part Number
— “JAN”
— Date Lot Code
— CAGE
M123A
02BPC
271FC
JAN
271F
100V
XXXX*
31433
C062Z, C512Z
MIL-PRF-123
Part Number
“JAN”
—
—
—
—
Capacitance Code & Tolerance
Voltage
Date Lot Code
CAGE
CAGE =
Commercial and
Government Entity
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIP/MIL-PRF-123
CAPACITOR OUTLINE DRAWINGS
Note: For solder coated termination, add 0.015" (0.38mm) to the positive width and thickness tolerances. Add the following to the
positive length tolerance: CKS51 - 0.020" (0.51mm); CKS52, CKS53 and CKS54 - 0.025" (0.64mm); add 0.012" (0.30mm) to the bandwidth tolerance.
DIMENSIONS — INCHES
Military
Equivalent
Styles
Chip
Size
L
Length
W
Width
T
Thickness
Maximum
0805
CKS51
0.080 ± 0.015
0.050 ± 0.015
0.055
1210
CKS52
0.120 ± 0.015
0.100 ± 0.015
0.065
1808
CKS53
0.180 ± 0.015
0.080 ± 0.015
0.065
2225
CKS54
0.220 ± 0.015
0.250 ± 0.015
0.070
1206
CKS55
0.120 ± 0.015
0.060 ± 0.015
0.065
1812
CKS56
0.180 ± 0.015
0.125 ± 0.015
0.080
1825
CKS57
0.180 ± 0.015
0.250 ± 0.015
0.080
MARKING
Capacitors shall be legibly laser
marked in contrasting color with
the KEMET trademark and
2-digit capacitance symbol.
ORDERING INFORMATION
C 0805
Z
101
K
5
G
A
L
Termination
Style
C - Ceramic
Size Code
L - Base metallization-barriersolder plated (tin/lead alloy with
a minimum of 4% lead)
(70Sn/30Pb)
H = Guarded, solder coated
(Sn60)
0805, 1206, 1210, 1808, 1812, 1825, 2225
Specification
Z - MIL-PRF-123
Failure Rate
(%.1000 Hours)
A = Standard, Not Applicable
Temperature Characteristic
Capacitance Code, pF
First two digits represent significant figures.
Third digit specifies number of zeros.
Capacitance Tolerance
C = ±0.25pF J = ±5%
D = ±0.5pF K = ±10%
F = ±1%
Voltage
5 = 50; 1 = 100
M123 A
10
Measured Measured With
KEMET
Military
Temp.
Without DC
Bias (Rated
Designator Equivalent Range, °C
Bias Voltage
Voltage)
BX
B
G
(UltraStable)
BP
-55 to
125
±30
ppm°C
±30
ppm°C
X
(Stable)
BX
-55 to
+125
±15%
+15%
-25%
472
K
Z
Termination
Z - Base metallization-barriersolder plated (tin/lead alloy with
a minimum of 4% lead)
(70Sn/30Pb)
S = Guarded, solder coated
(Sn60)
Military Specification
Number
Modification Number
Indicates the latest characteristics of
the part in the specification sheet
Tolerance
C = ±0.25pF; D = ±0.5pF;
F = ±1%; J = ±5%; K = ± 10%
MIL-PRF-123 Slash Sheet Number
Slash Sheet # KEMET Style
MIL-PRF-123
Style
10
C0805
CKS51
11
C1210
CKS52
12
C1808
CKS53
13
C2225
CKS54
21
C1206
CKS55
22
C1812
CKS56
23
C1825
CKS57
Capacitance Picofarad Code
Voltage
B = 50; C = 100
Temperature Characteristic
Capacitance Change with Temperature
Temp.
KEMET
Military
Range,
Designator Equivalent
°C
G
(UltraStable)
X
(Stable)
Measured Without
DC Bias Voltage
Measured With
Bias (Rated
Voltage)
BP
-55 to
125
±30
ppm°C
±30
ppm°C
BX
-55 to
+125
±15%
+15%
-25%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
9
CERAMIC CHIP/MIL-PRF-123 (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50/100 VOLT- BP-C0805 SIZE (MILITARY CKS51)
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
68.0
75.0
82.0
91.0
100.0
110.0
120.0
130.0
150.0
160.0
180.0
200.0
220.0
240.0
270.0
300.0
330.0
360.0
390.0
430.0
470.0
C0805Z109(1)(8)GAL
C0805Z119(1)(8)GAL
C0805Z129(1)(8)GAL
C0805Z139(1)(8)GAL
C0805Z159(1)(8)GAL
C0805Z169(1)(8)GAL
C0805Z189(1)(8)GAL
C0805Z209(1)(8)GAL
C0805Z229(1)(8)GAL
C0805Z249(1)(8)GAL
C0805Z279(1)(8)GAL
C0805Z309(1)(8)GAL
C0805Z339(1)(8)GAL
C0805Z369(1)(8)GAL
C0805Z399(1)(8)GAL
C0805Z439(1)(8)GAL
C0805Z479(1)(8)GAL
C0805Z519(1)(8)GAL
C0805Z569(1)(8)GAL
C0805Z629(1)(8)GAL
C0805Z689(1)(8)GAL
C0805Z759(1)(8)GAL
C0805Z829(1)(8)GAL
C0805Z919(1)(8)GAL
C0805Z100(2)(8)GAL
C0805Z110(2)(8)GAL
C0805Z120(2)(8)GAL
C0805Z130(2)(8)GAL
C0805Z150(2)(8)GAL
C0805Z160(2)(8)GAL
C0805Z180(2)(8)GAL
C0805Z200(2)(8)GAL
C0805Z220(2)(8)GAL
C0805Z240(2)(8)GAL
C0805Z270(3)(8)GAL
C0805Z300(3)(8)GAL
C0805Z330(3)(8)GAL
C0805Z360(3)(8)GAL
C0805Z390(3)(8)GAL
C0805Z430(3)(8)GAL
C0805Z470(3)(8)GAL
C0805Z510(3)(8)GAL
C0805Z560(3)(8)GAL
C0805Z620(3)(8)GAL
C0805Z680(3)(8)GAL
C0805Z750(3)(8)GAL
C0805Z820(3)(8)GAL
C0805Z910(3)(8)GAL
C0805Z101(3)(8)GAL
C0805Z111(3)(8)GAL
C0805Z121(3)(8)GAL
C0805Z131(3)(8)GAL
C0805Z151(3)(8)GAL
C0805Z161(3)(8)GAL
C0805Z181(3)(8)GAL
C0805Z201(3)(8)GAL
C0805Z221(3)(8)GAL
C0805Z241(3)(8)GAL
C0805Z271(3)(8)GAL
C0805Z301(3)(8)GAL
C0805Z331(3)(8)GAL
C0805Z361(3)(8)GAL
C0805Z391(3)(8)GAL
C0805Z431(3)(8)GAL
C0805Z471(3)(8)GAL
M123A10BP(7)1R0(1)Z
M123A10BP(7)1R1(1)Z
M123A10BP(7)1R2(1)Z
M123A10BP(7)1R3(1)Z
M123A10BP(7)1R5(1)Z
M123A10BP(7)1R6(1)Z
M123A10BP(7)1R8(1)Z
M123A10BP(7)2R0(1)Z
M123A10BP(7)2R2(1)Z
M123A10BP(7)2R4(1)Z
M123A10BP(7)2R7(1)Z
M123A10BP(7)3R0(1)Z
M123A10BP(7)3R3(1)Z
M123A10BP(7)3R6(1)Z
M123A10BP(7)3R9(1)Z
M123A10BP(7)4R3(1)Z
M123A10BP(7)4R7(1)Z
M123A10BP(7)5R1(1)Z
M123A10BP(7)5R6(1)Z
M123A10BP(7)6R2(1)Z
M123A10BP(7)6R8(1)Z
M123A10BP(7)7R5(1)Z
M123A10BP(7)8R2(1)Z
M123A10BP(7)9R1(1)Z
M123A10BP(7)100(2)Z
M123A10BP(7)110(2)Z
M123A10BP(7)120(2)Z
M123A10BP(7)130(2)Z
M123A10BP(7)150(2)Z
M123A10BP(7)160(2)Z
M123A10BP(7)180(2)Z
M123A10BP(7)200(2)Z
M123A10BP(7)220(2)Z
M123A10BP(7)240(2)Z
M123A10BP(7)270(3)Z
M123A10BP(7)300(3)Z
M123A10BP(7)330(3)Z
M123A10BP(7)360(3)Z
M123A10BP(7)390((3)Z
M123A10BP(7)430(3)Z
M123A10BP(7)470(3)Z
M123A10BP(7)510(3)Z
M123A10BP(7)560(3)Z
M123A10BP(7)620(3)Z
M123A10BP(7)680(3)Z
M123A10BP(7)750(3)Z
M123A10BP(7)820(3)Z
M123A10BP(7)910(3)Z
M123A10BP(7)101(3)Z
M123A10BP(7)111(3)Z
M123A10BP(7)121(3)Z
M123A10BP(7)131(3)Z
M123A10BP(7)151(3)Z
M123A10BP(7)161(3)Z
M123A10BP(7)181(3)Z
M123A10BP(7)201(3)Z
M123A10BP(7)221(3)Z
M123A10BP(7)241(3)Z
M123A10BP(7)271(3)Z
M123A10BP(7)301(3)Z
M123A10BP(7)331(3)Z
M123A10BP(7)361(3)Z
M123A10BP(7)391(3)Z
M123A10BP(7)431(3)Z
M123A10BP(7)471(3)Z
To complete the KEMET part numbers, insert the following tolerances:
(1) C = ±0.25pF; D = ±0.5pF
(2) C = ±0.25pF; J = ±5%; K = ±10%
(3) F = ±1%; J = ±5%; K = ±10%
(4) B = ±0.1pF; C = ±0.25pF%
(5) B = ±0.1pF; C = ±.25pF; D = ±0.50pF
(6) K = ±10%; M = ±20%
To complete the KEMET part numbers, insert the following voltage:
(7) B = 50 volts; C = 100 volts
(8) 5 = 50 volts; 1 = 100volts
10
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50 VOLT-BP-C0805 SIZE (MILITARY CKS51)
510.0
C0805Z511(3)5GAL
M123A10BPB511(3)Z
M123A10BPB561(3)Z
560.0
C0805Z561(3)5GAL
620.0
C0805Z621(3)5GAL
M123A10BPB621(3)Z
M123A10BPB681(3)Z
680.0
C0805Z681(3)5GAL
50/100 VOLT-BX-C0805 SIZE (MILITARY CKS51)
M123A10BX(7)331KZ
330.0
C0805Z331K(8)XAL
390.0
C0805Z391K(8)XAL
M123A10BX(7)391KZ
M123A10BX(7)471KZ
470.0
C0805Z471K(8)XAL
560.0
C0805Z561K(8)XAL
M123A10BX(7)561KZ
M123A10BX(7)681KZ
680.0
C0805Z681K(8)XAL
820.0
C0805Z821K(8)XAL
M123A10BX(7)821KZ
M123A10BX(7)102KZ
1,000.0
C0805Z102K(8)XAL
M123A10BX(7)122KZ
1,200.0
C0805Z122K(8)XAL
1,500.0
C0805Z152K(8)XAL
M123A10BX(7)152KZ
M123A10BX(7)182KZ
1,800.0
C0805Z182K(8)XAL
2,200.0
C0805Z222K(8)XAL
M123A10BX(7)222KZ
M123A10BX(7)272KZ
2,700.0
C0805Z272K(8)XAL
M123A10BX(7)332KZ
3,300.0
C0805Z332K(8)XAL
3,900.0
C0805Z392K(8)XAL
M123A10BX(7)392KZ
M123A10BX(7)472KZ
4,700.0
C0805Z472K(8)XAL
50 VOLT-BX-C0805 SIZE (MILITARY CKS51)
5,600.0
C0805Z562K5XAL
M123A10BXB562KZ
6,800.0
C0805Z682K5XAL
M123A10BXB682KZ
8,200.0
C0805Z822K5XAL
M123A10BXB822KZ
10,000.0
C0805Z103K5XAL
M123A10BXB103KZ
12,000.0
C0805Z123K5XAL
M123A10BXB123KZ
15,000.0
C0805Z153K5XAL
M123A10BXB153KZ
18,000.0
C0805Z183K5XAL
M123A10BXB183KZ
50/100 VOLT-BP-C1210 SIZE (MILITARY CKS52)
300.0
C1210Z301(3)(8)GAL M123A11BP(7)301(3)Z
330.0
C1210Z331(3)(8)GAL M123A11BP(7)331(3)Z
360.0
C1210Z361(3)(8)GAL M123A11BP(7)361(3)Z
390.0
C1210Z391(3)(8)GAL M123A11BP(7)391(3)Z
430.0
C1210Z431(3)(8)GAL M123A11BP(7)431(3)Z
470.0
C1210Z471(3)(8)GAL M123A11BP(7)471(3)Z
510.0
C1210Z511(3)(8)GAL M123A11BP(7)511(3)Z
560.0
C1210Z561(3)(8)GAL M123A11BP(7)561(3)Z
620.0
C1210Z621(3)(8)GAL M123A11BP(7)621(3)Z
680.0
C1210Z681(3)(8)GAL M123A11BP(7)681(3)Z
750.0
C1210Z751(3)(8)GAL M123A11BP(7)751(3)Z
820.0
C1210Z821(3)(8)GAL M123A11BP(7)821(3)Z
910.0
C1210Z911(3)(8)GAL M123A11BP(7)911(3)Z
1,000.0
C1210Z102(3)(8)GAL M123A11BP(7)102(3)Z
1,100.0
C1210Z112(3)(8)GAL M123A11BP(7)112(3)Z
1,200.0
C1210Z122(3)(8)GAL M123A11BP(7)122(3)Z
1,300.0
C1210Z132(3)(8)GAL M123A11BP(7)132(3)Z
1,500.0
C1210Z152(3)(8)GAL M123A11BP(7)152(3)Z
1,600.0
C1210Z162(3)(8)GAL M123A11BP(7)162(3)Z
1,800.0
C1210Z182(3)(8)GAL M123A11BP(7)182(3)Z
2,000.0
C1210Z202(3)(8)GAL M123A11BP(7)202(3)Z
2,200.0
C1210Z222(3)(8)GAL M123A11BP(7)222(3)Z
50 VOLT-BP-C1210 SIZE (MILITARY CKS52)
M123A11BPB242(3)Z
2,400.0
C1210Z242(3)5GAL
2,700.0
C1210Z272(3)5GAL
M123A11BPB272(3)Z
3,000.0
C1210Z302(3)5GAL
M123A11BPB302(3)Z
M123A11BPB332(3)Z
3,300.0
C1210Z332(3)5GAL
50/100 VOLT-BX-C1210 SIZE (MILITARY CKS52)
5,600.0
C1210Z562(6)(8)XAL M123A11BX(7)562(6)Z
6,800.0
C1210Z682(6)(8)XAL M123A11BX(7)682(6)Z
8,200.0
C1210Z822(6)(8)XAL M123A11BX(7)822(6)Z
10,000.0
C1210Z103(6)(8)XAL M123A11BX(7)103(6)Z
12,000.0
C1210Z123(6)(8)XAL M123A11BX(7)123(6)Z
15,000.0
C1210Z153(6)(8)XAL M123A11BX(7)153(6)Z
18,000.0
C1210Z183(6)(8)XAL M123A11BX(7)183(6)Z
22,000.0
C1210Z223(6)(8)XAL M123A11BX(7)223(6)Z
27,000.0
C1210Z273(6)(8)XAL M123A11BX(7)273(6)Z
50 VOLT-BX-C1210 SIZE (MILITARY CKS52)
33,000.0
39,000.0
47,000.0
56,000.0
68,000.0
82,000.0
100,000.0
C1210Z333(6)5XAL
C1210Z393(6)5XAL
C1210Z473(6)5XAL
C1210Z563(6)5XAL
C1210Z683(6)5XAL
C1210Z823(6)5XAL
C1210Z104(6)5XAL
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50/100 VOLT-BP-C1808 SIZE (MILITARY CKS53)
300.0
C1808Z301(3)(8)GAL M123A12BP(7)301(3)Z
330.0
C1808Z331(3)(8)GAL M123A12BP(7)331(3)Z
360.0
C1808Z361(3)(8)GAL M123A12BP(7)361(3)Z
390.0
C1808Z391(3)(8)GAL M123A12BP(7)391(3)Z
430.0
C1808Z431(3)(8)GAL M123A12BP(7)431(3)Z
470.0
C1808Z471(3)(8)GAL M123A12BP(7)471(3)Z
510.0
C1808Z511(3)(8)GAL M123A12BP(7)511(3)Z
560.0
C1808Z561(3(8)GAL M123A12BP(7)561(3)Z
620.0
C1808Z621(3)(8)GAL M123A12BP(7)621(3)Z
680.0
C1808Z681(3)(8)GAL M123A12BP(7)681(3)Z
750.0
C1808Z751(3)(8)GAL M123A12BP(7)751(3)Z
820.0
C1808Z821(3)(8)GAL M123A12BP(7)821(3)Z
910.0
C1808Z911(3)(8)GAL M123A12BP(7)911(3)Z
1,000.0
C1808Z102(3)(8)GAL M123A12BP(7)102(3)Z
50/100 VOLT-BX-C1808 SIZE (MILITARY CKS53)
5,600.0
C1808Z562K(8)XAL M123A12BX(7)562KZ
6,800.0
C1808Z682K(8)XAL M123A12BX(7)682KZ
8,200.0
C1808Z822K(8)XAL M123A12BX(7)822KZ
10,000.0
C1808Z103K(8)XAL M123A12BX(7)103KZ
12,000.0
C1808Z123K(8)XAL M123A12BX(7)123KZ
15,000.0
C1808Z153K(8)XAL M123A12BX(7)153KZ
18,000.0
C1808Z183K(8)XAL M123A12BX(7)183KZ
22,000.0
C1808Z223K(8)XAL M123A12BX(7)223KZ
27,000.0
C1808Z273K(8)XAL M123A12BX(7)273KZ
33,000.0
C1808Z333K(8)XAL M123A12BX(7)333KZ
50 VOLT-BX-C1808 SIZE (MILITARY CKS53)
39,000.0
C1808Z393K5XAL
M123A12BXB393KZ
47,000.0
C1808Z473K5XAL
M123A12BXB473KZ
56,000.0
C1808Z563K5XAL
M123A12BXB563KZ
68,000.0
C1808Z683K5XAL
M123A12BXB683KZ
82,000.0
C1808Z823K5XAL
M123A12BXB823KZ
100,000.0
C1808Z104K5XAL
M123A12BXB104KZ
50 VOLT-BP-C2225 SIZE (MILITARY CKS54)
1,100.0
C2225Z112(3)5GAL M123A13BPB112(3)Z
1,200.0
C2225Z122(3)5GAL M123A13BPB122(3)Z
1,300.0
C2225Z132(3)5GAL M123A13BPB132(3)Z
1,500.0
C2225Z152(3)5GAL M123A13BPB152(3)Z
1,600.0
C2225Z162(3)5GAL M123A13BPB162(3)Z
1,800.0
C2225Z182(3)5GAL M123A13BPB182(3)Z
2,000.0
C2225Z202(3)5GAL M123A13BPB202(3)Z
2,200.0
C2225Z222(3)5GAL M123A13BPB222(3)Z
2,400.0
C2225Z242(3)5GAL M123A13BPB242(3)Z
2,700.0
C2225Z272(3)5GAL M123A13BPB272(3)Z
3,000.0
C2225Z302(3)5GAL M123A13BPB302(3)Z
3,300.0
C2225Z332(3)5GAL M123A13BPB332(3)Z
3,600.0
C2225Z362(3)5GAL M123A13BPB362(3)Z
3,900.0
C2225Z392(3)5GAL M123A13BPB392(3)Z
4,300.0
C2225Z432(3)5GAL M123A13BPB432(3)Z
4,700.0
C2225Z472(3)5GAL M123A13BPB472(3)Z
5,100.0
C2225Z512(3)5GAL M123A13BPB512(3)Z
5,600.0
C2225Z562(3)5GAL M123A13BPB562(3)Z
6,200.0
C2225Z622(3)5GAL M123A13BPB622(3)Z
6,800.0
C2225Z682(3)5GAL M123A13BPB682(3)Z
7,500.0
C2225Z752(3)5GAL M123A13BPB752(3)Z
8,200.0
C2225Z822(3)5GAL M123A13BPB822(3)Z
9,100.0
C2225Z912(3)5GAL M123A13BPB912(3)Z
10,000.0
C2225Z103(3)5GAL M123A13BPB103(3)Z
50 VOLT-BP-C2225 SIZE (MILITARY CKS54)
120,000.0
150,000.0
180,000.0
220,000.0
270,000.0
330,000.0
390,000.0
470,000.0
C2225Z124K5XAL
C2225Z154K5XAL
C2225Z184K5XAL
C2225Z224K5XAL
C2225Z274K5XAL
C2225Z334K5XAL
C2225Z394K5XAL
C2225Z474K5XAL
M123A13BXB124KZ
M123A13BXB154KZ
M123A13BXB184KZ
M123A13BXB224KZ
M123A13BXB274KZ
M123A13BXB334KZ
M123A13BXB394KZ
M123A13BXB474KZ
M123A11BXB333(6)Z
M123A11BXB393(6)Z
M123A11BXB473(6)Z
M123A11BXB563(6)Z
M123A11BXB683(6)Z
M123A11BXB823(6)Z
M123A11BXB104(6)Z
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIP/MIL-PRF-123 (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT - BP - C1206 SIZE (MILITARY CKS55)
1.0
C1206Z109(4)1GAL M123A21BPC1R0(4)Z
1.1
C1206Z119(4)1GAL M123A21BPC1R1(4)Z
1.2
C1206Z129(4)1GAL M123A21BPC1R2(4)Z
1.3
C1206Z139(4)1GAL M123A21BPC1R3(4)Z
1.5
C1206Z159(4)1GAL M123A21BPC1R5(4)Z
1.6
C1206Z169(4)1GAL M123A21BPC1R6(4)Z
1.8
C1206Z189(4)1GAL M123A21BPC1R8(4)Z
2.0
C1206Z209(4)1GAL M123A21BPC2R0(4)Z
2.2
C1206Z229(4)1GAL M123A21BPC2R2(4)Z
2.4
C1206Z249(4)1GAL M123A21BPC2R4(4)Z
2.7
C1206Z279(5)1GAL M123A21BPC2R7(5)Z
3.0
C1206Z309(5)1GAL M123A21BPC3R0(5)Z
3.3
C1206Z339(5)1GAL M123A21BPC3R3(5)Z
3.6
C1206Z369(5)1GAL M123A21BPC3R6(5)Z
3.9
C1206Z399(5)1GAL M123A21BPC3R9(5)Z
4.3
C1206Z439(5)1GAL M123A21BPC4R3(5)Z
4.7
C1206Z479(5)1GAL M123A21BPC4R7(5)Z
5.1
C1206Z519(5)1GAL M123A21BPC5R1(5)Z
5.6
C1206Z569(5)1GAL M123A21BPC5R6(5)Z
6.2
C1206Z629(5)1GAL M123A21BPC6R2(5)Z
6.8
C1206Z689(5)1GAL M123A21BPC6R8(5)Z
7.5
C1206Z759(5)1GAL M123A21BPC7R5(5)Z
8.2
C1206Z829(5)1GAL M123A21BPC8R2(5)Z
9.1
C1206Z919(5)1GAL M123A21BPC9R1(5)Z
10.0
C1206Z100(3)1GAL M123A21BPC100(3)Z
11.0
C1206Z110(3)1GAL M123A21BPC110(3)Z
12.0
C1206Z120(3)1GAL M123A21BPC120(3)Z
13.0
C1206Z130(3)1GAL M123A21BPC130(3)Z
15.0
C1206Z150(3)1GAL M123A21BPC150(3)Z
16.0
C1206Z160(3)1GAL M123A21BPC160(3)Z
18.0
C1206Z180(3)1GAL M123A21BPC180(3)Z
20.0
C1206Z200(3)1GAL M123A21BPC200(3)Z
24.0
C1206Z240(3)1GAL M123A21BPC240(3)Z
27.0
C1206Z270(3)1GAL M123A21BPC270(3)Z
33.0
C1206Z330(3)1GAL M123A21BPC330(3)Z
36.0
C1206Z360(3)1GAL M123A21BPC360(3)Z
39.0
C1206Z390(3)1GAL M123A21BPC390(3)Z
43.0
C1206Z430(3)1GAL M123A21BPC430(3)Z
47.0
C1206Z470(3)1GAL M123A21BPC470(3)Z
51.0
C1206Z510(3)1GAL M123A21BPC510(3)Z
56.0
C1206Z560(3)1GAL M123A21BPC560(3)Z
62.0
C1206Z620(3)1GAL M123A21BPC620(3)Z
68.0
C1206Z680(3)1GAL M123A21BPC680(3)Z
75.0
C1206Z750(3)1GAL M123A21BPC750(3)Z
82.0
C1206Z820(3)1GAL M123A21BPC820(3)Z
91.0
C1206Z910(3)1GAL M123A21BPC910(3)Z
100.0
C1206Z101(3)1GAL M123A21BPC101(3)Z
110.0
C1206Z111(3)1GAL M123A21BPC111(3)Z
120.0
C1206Z121(3)1GAL M123A21BPC121(3)Z
130.0
C1206Z131(3)1GAL M123A21BPC131(3)Z
150.0
C1206Z151(3)1GAL M123A21BPC151(3)Z
160.0
C1206Z161(3)1GAL M123A21BPC161(3)Z
180.0
C1206Z181(3)1GAL M123A21BPC181(3)Z
200.0
C1206Z201(3)1GAL M123A21BPC201(3)Z
220.0
C1206Z221(3)1GAL M123A21BPC221(3)Z
240.0
C1206Z241(3)1GAL M123A21BPC241(3)Z
270.0
C1206Z271(3)1GAL M123A21BPC271(3)Z
300.0
C1206Z301(3)1GAL M123A21BPC301(3)Z
330.0
C1206Z331(3)1GAL M123A21BPC331(3)Z
360.0
C1206Z361(3)1GAL M123A21BPC361(3)Z
390.0
C1206Z391(3)1GAL M123A21BPC391(3)Z
430.0
C1206Z431(3)1GAL M123A21BPC431(3)Z
470.0
C1206Z471(3)1GAL M123A21BPC471(3)Z
510.0
C1206Z511(3)1GAL M123A21BPC511(3)Z
560.0
C1206Z561(3)1GAL M123A21BPC561(3)Z
620.0
C1206Z621(3)1GAL M123A21BPC621(3)Z
680.0
C1206Z681(3)1GAL M123A21BPC681(3)Z
750.0
C1206Z751(3)1GAL M123A21BPC751(3)Z
820.0
C1206Z821(3)1GAL M123A21BPC821(3)Z
910.0
C1206Z911(3)1GAL M123A21BPC911(3)Z
1000.0
C1206Z102(3)1GAL M123A21BPC102(3)Z
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50 VOLT-BP-C1206 SIZE (MILITARY CKS55)
1,100.0
C1206Z112(3)5GAL M123A21BPB112(3)Z
1,200.0
C1206Z122(3)5GAL M123A21BPB122(3)Z
1,300.0
C1206Z132(3)5GAL M123A21BPB132(3)Z
1,500.0
C1206Z152(3)5GAL M123A21BPB152(3)Z
1,600.0
C1206Z162(3)5GAL M123A21BPB162(3)Z
1,800.0
C1206Z182(3)5GAL M123A21BPB182(3)Z
2,000.0
C1206Z202(3)5GAL M123A21BPB202(3)Z
2,200.0
C1206Z222(3)5GAL M123A21BPB222(3)Z
100 VOLT-BX-C1206 SIZE (MILITARY CKS55)
4,700.0
C1206Z472(6)1XAL
M123A21BXC472(6)Z
5,600.0
C1206Z562(6)1XAL
M123A21BXC562(6)Z
6,800.0
C1206Z682(6)1XAL
M123A21BXC682(6)Z
8,200.0
C1206Z822(6)1XAL
M123A21BXC822(6)Z
10,000.0
C1206Z103(6)1XAL
M123A21BXC103(6)Z
12,000.0
C1206Z123(6)1XAL
M123A21BXC123(6)Z
15,000.0
C1206Z153(6)1XAL
M123A21BXC153(6)Z
50 VOLT-BX-C1206 SIZE (MILITARY CKS55)
18,000.0
C1206Z183(6)5XAL
M123A21BXB183(6)Z
22,000.0
C1206Z223(6)5XAL
M123A21BXB223(6)Z
27,000.0
C1206Z273(6)5XAL
M123A21BXB273(6)Z
33,000.0
C1206Z333(6)5XAL
M123A21BXB333(6)Z
39,000.0
C1206Z393(6)5XAL
M123A21BXB393(6)Z
100 VOLT-BP-C1812 SIZE (MILITARY CKS56)
1,200.0
C1812Z122(3)1GAL M123A22BPC122(3)Z
2,200.0
C1812Z222(3)1GAL M123A22BPC222(3)Z
2,400.0
C1812Z242(3)1GAL M123A22BPC242(3)Z
2,700.0
C1812Z272(3)1GAL M123A22BPC272(3)Z
3,000.0
C1812Z302(3)1GAL M123A22BPC302(3)Z
3,300.0
C1812Z332(3)1GAL M123A22BPC332(3)Z
3,600.0
C1812Z362(3)1GAL M123A22BPC362(3)Z
3,900.0
C1812Z392(3)1GAL M123A22BPC392(3)Z
4,300.0
C1812Z432(3)1GAL M123A22BPC432(3)Z
4,700.0
C1812Z472(3)1GAL M123A22BPC472(3)Z
50 VOLT-BP-C1812 SIZE (MILITARY CKS56)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT-BP-C1825 SIZE (MILITARY CKS57)
3,900.0
C1825Z392(3)1GAL M123A23BPC392(3)Z
4,700.0
C1825Z472(3)1GAL M123A23BPC472(3)Z
5,100.0
C1825Z512(3)1GAL M123A23BPC512(3)Z
5,600.0
C1825Z562(3)1GAL M123A23BPC562(3)Z
6,200.0
C1825Z622(3)1GAL M123A23BPC622(3)Z
6,800.0
C1825Z682(3)1GAL M123A23BPC682(3)Z
7,500.0
C1825Z752(3)1GAL M123A23BPC752(3)Z
8,200.0
C1825Z822(3)1GAL M123A23BPC822(3)Z
9,100.0
C1825Z912(3)1GAL M123A23BPC912(3)Z
10,000.0
C1825Z103(3)1GAL M123A23BPC103(3)Z
50 VOLT-BP-C1812 SIZE (MILITARY CKS57)
11,000.0
C1825Z113(3)5GAL M123A23BPB113(3)Z
12,000.0
C1825Z123(3)5GAL M123A23BPB123(3)Z
13,000.0
C1825Z133(3)5GAL M123A23BPB133(3)Z
15,000.0
C1825Z153(3)5GAL M123A23BPB153(3)Z
16,000.0
C1825Z163(3)5GAL M123A23BPB163(3)Z
18,000.0
C1825Z183(3)5GAL M123A23BPB183(3)Z
20,000.0
C1825Z203(3)5GAL M123A23BPB203(3)Z
22,000.0
C1825Z223(3)5GAL M123A23BPB223(3)Z
100 VOLT-BX-C1825 SIZE (MILITARY CKS57)
56,000.0
C1825Z563(6)1XAL M123A23BXC563(6)Z
68,000.0
C1825Z683(6)1XAL M123A23BXC683(6)Z
82,000.0
C1825Z823(6)1XAL M123A23BXC823(6)Z
100,000.0
C1825Z104(6)1XAL M123A23BXC104(6)Z
120,000.0
C1825Z124(6)1XAL M123A23BXC124(6)Z
150,000.0
C1825Z154(6)1XAL M123A23BXC154(6)Z
50 VOLT-BX-C1825 SIZE (MILITARY CKS57)
180,000.0
C1825Z184(6)5XAL M123A23BXB184(6)Z
220,000.0
C1825Z224(6)5XAL M123A23BXB224(6)Z
270,000.0
C1825Z274(6)5XAL M123A23BXB274(6)Z
330,000.0
C1825Z334(6)5XAL M123A23BXB334(6)Z
390,000.0
C1825Z394(6)5XAL M123A23BXB394(6)Z
470,000.0
C1825Z474(6)5XAL M123A23BXB474(6)Z
5,100.0
C1812Z512(3)5GAL M123A22BPB512(3)Z
5,600.0
C1812Z562(3)5GAL M123A22BPB562(3)Z
6,200.0
C1812Z622(3)5GAL M123A22BPB622(3)Z
6,800.0
C1812Z682(3)5GAL M123A22BPB682(3)Z
7,500.0
C1812Z752(3)5GAL M123A22BPB752(3)Z
8,200.0
C1812Z822(3)5GAL M123A22BPB822(3)Z
9,100.0
C1812Z912(3)5GAL M123A22BPB912(3)Z
10,000.0
C1812Z103(3)5GAL M123A22BPB103(3)Z
100 VOLT-BX-C1812 SIZE (MILITARY CKS56)
M123A22BXC273(6)Z
27,000.0
C1812Z273(6)1XAL
33,000.0
C1812Z333(6)1XAL
M123A22BXC333(6)Z
39,000.0
C1812Z393(6)1XAL
M123A22BXC393(6)Z
47,000.0
C1812Z473(6)1XAL
M123A22BXC473(6)Z
56,000.0
C1812Z563(6)1XAL
M123A22BXC563(6)Z
50 VOLT-BX-C1812 SIZE (MILITARY CKS56)
100,000.0
120,000.0
150,000.0
180,000.0
C1812Z104(6)5XAL
C1812Z124(6)5XAL
C1812Z154(6)5XAL
C1812Z184(6)5XAL
M123A22BXB104(6)Z
M123A22BXB124(6)Z
M123A22BXB154(6)Z
M123A22BXB184(6)Z
To complete the KEMET part numbers, insert the following tolerances:
To complete the part numbers, insert the following tolerances:
(1) C = ±0.25pF; D = ±0.5pF
(2) C = ±0.25pF; J = ±5%; K = ±10%
(3) F = ±1%; J = ±5%; K = ±10%
(3)
J, ±5%; K, ±10%
(4) B =
±0.1pF;F,
C =±1%;
±0.25pF%
(5) B = ±0.1pF; C = ±.25pF; D = ±0.50pF
(6)
K,
±10%;
M, ±20%
(6) K = ±10%; M = ±20%
To complete the KEMET part numbers, insert the following voltage:
(7) B = 50 volts; C = 100 volts
(8) 5 = 50 volts; 1 = 100volts
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
11
CERAMIC HIGH RELIABILITY
GENERAL INFORMATION GR900 SERIES
HIGH RELIABILITY — GR900
GR900 capacitors are intended for use in any application where
the chance of failure must be reduced to the lowest possible
level. While any well-made multilayer ceramic capacitor is an
inherently reliable device, GR900 capacitors receive special
attention in all phases of manufacture including:
— Raw Materials Selection
— Special Designs
— Clean Room Production
— Individual Batch Testing
— C-SAM (when applicable)
— Singular Batch Identity is Maintained
— Destructive Physical Analysis
These parts are well worth the added investment in comparison
to the cost of a device or system failure.
Typical applications include:
Medical, Aerospace, Communication Satellites, Radar, Guidance
Systems.
SCREENING AND SAMPLE TESTS
Each batch receives the following testing/inspections:
Preliminary:
1. Destructive Physical Analysis: (DPA) - A sample is pulled from
each lot and examined per EIA-469 and KEMET’s strict internal
void and delamination criteria. Sampling plan is per MIL-PRF-123.
2. C-SAM - May be performed on batches failing to meet the
DPA criteria for removal of marginal product. Not required on
each lot.
4. Insulation Resistance — The 25°C measurement with rated
voltage applied shall be the lesser of 100 GΩ or 1000 megohmmicrofarads (100% of lot).
*5. Insulation Resistance — The 125°C measurement with
rated voltage applied shall be the lesser of 10 GΩ or 100
megohm-microfarads (100% of lot). For chips, 125°C IR is performed prior to Step 3 above.
6. Storage at 150°C for 2 hours minimum without voltage applied
followed by a 12-hour minimum stabilization period (temperature
characteristic BX only).
7. Capacitance — Shall be within specified tolerance at 25°C
(100% of lot). (Aging phenomenon is taken into account for BX
dielectric to obtain capacitance.)
8. Dissipation Factor — Shall not exceed 2.5% for X7R (BX)
dielectric, 0.15% for C0G (BP) dielectric at 25°C. (100% of lot.)
9. Percent Defective Allowable (PDA) — The overall PDA is 8%
for parts outside the MIL-PRF-123 values. The PDA is per MILPRF-123 for all parts that are valid MIL-PRF-123 values. The PD
includes steps 1 through 8 above with the following exceptions.
Capacitance exclusion - capacitance values no more than 5% or
.5pF, whichever is greater for BX characteristic or 1% or .3pF,
whichever is greater for BP characteristic beyond specified tolerance limit, shall be removed from the lot but shall not be considered defective for determination of the PD.
Insulation Resistance at 25°C — Product which is not acceptable
for twice the military limit but is acceptable per the military limit,
is removed from the lot but shall not be considered defective for
determination of the PD.
Group A
10. Visual and Mechanical Examination — Performed per MILPRF-123 criteria.
1. Thermal Shock — Materials used in the construction of multilayer ceramic capacitors possess various thermal coefficients of
expansion. To assure maximum uniformity, each part is temperature cycled in accordance to MIL-STD-202, Method 107,
Condition A with Step 3 being 125°C. Number of cycles shall be
20 (100% of lot).
11. Radiographic Examination (Leaded Devices Only) —
Radial devices receive a one-plane X-ray.
2. Voltage Conditioning — One of the most strenuous environments for any capacitor is the high temperature/high voltage test.
All units are subject to twice-rated voltage to the units at the maximum rated temperature of 125°C for a minimum of 168 hours
and a maximum of 264 hours. The voltage conditioning may be
terminated at any time during 168 hours to 264 hours time interval that confirmed failures meet the requirements of the PDA during the last 48 hours of 1 unit or .4% (100% of lot).
All products are packaged in trays except C512 capacitors which
are packaged 1 piece per bag.
Optional Voltage Conditioning (Accelerated Voltage
Conditioning) — All conditions of the standard voltage conditioning apply with the exception of increased voltage and
decreased test time. Refer to MIL-PRF-123 for the proper formula.
12. Destructive Physical Analysis (DPA) — A sample is examined on each lot per EIA-469. Sampling Plan is per MIL-PRF-123.
STANDARD PACKAGING
DATA PACKAGE
A data package is sent with each shipment which contains:
1. Final Destructive Physical Analysis (DPA) report.
2. Certificate of Compliance stating that the parts meet all applicable requirements of the appropriate military specification to the
best failure level to which KEMET is approved.
3. Summary of Group A Testing.
*Step 5 is performed on chips at this point (100% of lot).
3. Dielectric Withstanding Voltage — 250% of the dc rated voltage at 25°C (100% of lot).
12
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/RADIAL — HIGH RELIABILITY GR900 SERIES
CAPACITOR OUTLINE DRAWINGS
C 052 B 223 K 1 X 5 C A
FAILURE RATE
MONOLITHIC
CERAMIC
CAPACITORS
PHYSICAL DIMENSIONS
A—Standard — Not Applicable
LEAD MATERIAL
(See above)
C — Standard —
Radial: solder coated copper
HI REL SPECIFICATIONS
APPLY:
INTERNAL CONSTRUCTION
5— Standard
B—Leaded devices
TEMPERATURE
CHARACTERISTICS
CAPACITANCE PICOFARAD CODE
First two digits are significant figures of capacitance value and third
digit is the number of zeros to follow in stating capacitance in picofarads. For example, “223” is 22,000 pF. The third-digit number “9”
indicates a divisor of 10; for example, “229” is 2.2 pF.
(See table below)
RATED VOLTAGE
1 — 100
2 — 200
5 — 50
CAPACITANCE TOLERANCE
M — ±20%
K — ±10%
J — ±5%
G — ±2% (G(BP) Temperature Characteristic Only)
F — ±1% (G(BP) Temperature Characteristic Only)
*D—±0.5 pF (G(BP) Temperature Characteristic Only)
*C—±0.25 pF (G(BP) Temperature Characteristic Only)
*These tolerances available only
for 1.0 through 9.1 pF capacitors.
TEMPERATURE CHARACTERISTICS CAPACITANCE CHANGE WITH TEMPERATURE -55° TO +125°C
PART NUMBER
LETTER
WITHOUT D.C.
BIAS
WITH RATED D.C.
VOLTAGE APPLIED
EIA
G
X
±30ppm/°C
±15%
±30ppm/°C
+15%, -25%
COG
X7R
OTHER NOMENCLATURE
MILITARY
CG,BP
BX
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
COMMON
NPO
—
13
CERAMIC MOLDED/RADIAL — HIGH RELIABILITY
GR900 SERIES (BP DIELECTRIC)
CAPACITOR MARKINGS
Size (C052 or C062) as applicable
KEMET
C512BG
C052
K= KEMET, B = GR900 Spec,
Temperature Characteristic,
(G = C0G, X = X7R)
KB G
Capacitance Code, Tolerance
101J
200V
— Voltage
XXXX
— Date Code
**
— Lot Code
104J
100V
— KEMET
— Size, B = GR900, Temperature
Characteristic (G = C0G, X = X7R)
— Capacitance Code, Tolerance
— Voltage
XXXX**
— Date Code & Lot Code
RATINGS & PART NUMBER REFERENCE
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT - BP - STYLE C052
1.0
1.1
1.2
1.5
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
C052B109(1)2G5CA
C052B119(1)2G5CA
C052B129(1)2G5CA
C052B159(1)2G5CA
C052B189(1)2G5CA
C052B209(1)2G5CA
C052B229(1)2G5CA
C052B249(1)2G5CA
C052B279(1)2G5CA
C052B309(1)2G5CA
C052B339(1)2G5CA
C052B369(1)2G5CA
C052B399(1)2G5CA
C052B439(1)2G5CA
C052B479(1)2G5CA
C052B519(1)2G5CA
C052B569(1)2G5CA
C052B629(1)2G5CA
C052B689(1)2G5CA
C052B759(1)2G5CA
C052B829(1)2G5CA
C052B919(1)2G5CA
C052B100(1)2G5CA
C052B110(1)2G5CA
C052B120(1)2G5CA
C052B130(1)2G5CA
C052B150(1)2G5CA
C052B160(1)2G5CA
C052B180(1)2G5CA
C052B200(1)2G5CA
C052B220(1)2G5CA
C052B240(1)2G5CA
C052B270(1)2G5CA
C052B300(1)2G5CA
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT - BP - STYLE C052 (Cont’d)
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
68.0
75.0
82.0
91.0
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
C052B330(1)2G5CA
C052B360(1)2G5CA
C052B390(1)2G5CA
C052B430(1)2G5CA
C052B470(1)2G5CA
C052B510(1)2G5CA
C052B560(1)2G5CA
C052B620(1)2G5CA
C052B680(1)2G5CA
C052B750(1)2G5CA
C052B820(1)2G5CA
C052B910(1)2G5CA
C052B101(1)2G5CA
C052B111(1)2G5CA
C0528121(1)2G5CA
C0528131(1)2G5CA
C052B151(1)2G5CA
C052B161(1)2G5CA
C0528181(1)2G5CA
C0528201(1)2G5CA
C052B221(1)2G5CA
C052B241(1)2G5CA
C052B271(1)2G5CA
C0528301(1)2G5CA
C052B331(1)2G5CA
C0528361(1)2G5CA
C052B391(1)2G5CA
C052B431(1)2G5CA
C052B471(1)2G5CA
C052B511(1)2G5CA
C052B561(1)2G5CA
C052B621(1)2G5CA
C052B681(1)2G5CA
C052B751(1)2G5CA
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on
page 13
BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0 thru 9.1pF
only) TEMPERATURE CHARACTERISTIC “G”
BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X”
(2) Capacitance values shown above are standard. Other capacitance values are available upon request.
14
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/RADIAL — HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS & PART NUMBER REFERENCE
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT - BP - STYLE C052 (Cont’d)
820
910
1000
1100
1200
1300
1500
C052B821(1)2G5CA
C052B911(1)2G5CA
C052B102(1)2G5CA
C052B112(1)2G5CA
C052B122(1)2G5CA
C052B132(1)2G5CA
C052B152(1)2G5CA
100 VOLT - BP - STYLE C052
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5100
5600
C052B162(1)1G5CA
C052B182(1)1G5CA
C052B202(1)1G5CA
C052B222(1)1G5CA
C052B242(1)1G5CA
C052B272(1)1G5CA
C052B302(1)1G5CA
C052B332(1)1G5CA
C052B362(1)1G5CA
C052B392(1)1G5CA
C052B432(1)1G5CA
C052B472(1)1G5CA
C052B512(1)1G5CA
C052B562(1)1G5CA
50 VOLT - BP - STYLE C052
6200
6800
C052B622(1)5G5CA
C052B682(1)5G5CA
200 VOLT - BX - STYLE C052
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10,000
12,000
15,000
C052B471(1)2X5CA
C052B561(1)2X5CA
C052B681(1)2X5CA
C052B821(1)2X5CA
C052B102(1)2X5CA
C052B122(1)2X5CA
C052B152(1)2X5CA
C052B182(1)2X5CA
C052B222(1)2X5CA
C052B272(1)2X5CA
C052B332(1)2X5CA
C052B392(1)2X5CA
C052B472(1)2X5CA
C052B562(1)2X5CA
C052B682(1)2X5CA
C052B822(1)2X5CA
C052B103(1)2X5CA
C052B123(1)2X5CA
C052B153(1)2X5CA
100 VOLT - BX - STYLE C052
18,000
22,000
27,000
33,000
39,000
47,000
C052B183(1)1X5CA
C052B223(1)1X5CA
C052B273(1)1X5CA
C052B333(1)1X5CA
C052B393(1)1X5CA
C052B473(1)1X5CA
50 VOLT - BX - STYLE C052
56,000
68,000
82,000
100,000
120,000
150,000
C052B563(1)5X5CA
C052B683(1)5X5CA
C052B823(1)5X5CA
C052B104(1)5X5CA
C052B124(1)5X5CA
C052B154(1)5X5CA
200 VOLT - BP - STYLE C062
270
330
360
390
C062B271(1)2G5CA
C062B331(1)2G5CA
C062B361(1)2G5CA
C062B391(1)2G5CA
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT - BP - STYLE C062 (Cont’d)
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4700
5100
5600
6200
6800
C062B431(1)2G5CA
C062B471(1)2G5CA
C062B511(1)2G5CA
C062B561(1)2G5CA
C062B621(1)2G5CA
C062B681(1)2G5CA
C062B751(1)2G5CA
C062B821(1)2G5CA
C062B911(1)2G5CA
C062B102(1)2G5CA
C062B112(1)2G5CA
C062B122(1)2G5CA
C062B132(1)2G5CA
C062B152(1)2G5CA
C062B162(1)2G5CA
C062B182(1)2G5CA
C062B202(1)2G5CA
C062B222(1)2G5CA
C062B242(1)2G5CA
C062B272(1)2G5CA
C062B302(1)2G5CA
C062B332(1)2G5CA
C062B362(1)2G5CA
C062B392(1)2G5CA
C062B472(1)2G5CA
C062B512(1)2G5CA
C062B562(1)2G5CA
C062B622(1)2G5CA
C062B682(1)2G5CA
100 VOLT - BP - STYLE C062
7500
8200
9100
10,000
11,000
12,000
13,000
15,000
16,000
18,000
20,000
22,000
24,000
C062B752(1)1G5CA
C062B822(1)1G5CA
C062B912(1)1G5CA
C062B103(1)1G5CA
C062B113(1)1G5CA
C062B123(1)1G5CA
C062B133(1)1G5CA
C062B153(1)1G5CA
C062B163(1)1G5CA
C062B183(1)1G5CA
C062B203(1)1G5CA
C062B223(1)1G5CA
C062B243(1)1G5CA
200 VOLT - BX - STYLE C062
3300
3900
4700
5600
6800
8200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
C062B332(1)2X5CA
C062B392(1)2X5CA
C062B472(1)2X5CA
C062B562(1)2X5CA
C062B682(1)2X5CA
C062B822(1)2X5CA
C062B103(1)2X5CA
C062B123(1)2X5CA
C062B153(1)2X5CA
C062B183(1)2X5CA
C062B223(1)2X5CA
C062B273(1)2X5CA
C062B333(1)2X5CA
C062B393(1)2X5CA
C062B473(1)2X5CA
C062B563(1)2X5CA
C062B683(1)2X5CA
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on
page 13. BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0
thru 9.1pF only) TEMPERATURE CHARACTERISTIC “G” BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X” (2) Capacitance values shown above are standard. Other capacitance values are
available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
15
CERAMIC MOLDED/RADIAL — HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS & PART NUMBER REFERENCE
CAPACITANCE
pF
KEMET
PART NUMBER
100 VOLT - BX - STYLE C062
82,000
100,000
120,000
150,000
180,000
220,000
C062B823(1)1X5CA
C062B104(1)1X5CA
C062B124(1)1X5CA
C062B154(1)1X5CA
C062B184(1)1X5CA
C062B224(1)1X5CA
50 VOLT - BX - STYLE C062
270,000
330,000
390,000
470,000
560,000
680,000
820,000
1,000,000
C062B274(1)5X5CA
C062B334(1)5X5CA
C062B394(1)5X5CA
C062B474(1)5X5CA
C062B564(1)5X5CA
C062B684(1)5X5CA
C062B824(1)5X5CA
C062B105(1)5X5CA
200 VOLT - BP- STYLE C512
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5600
6800
8200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
C512B202(1)2G5CA
C512B222(1)2G5CA
C512B242(1)2G5CA
C512B272(1)2G5CA
C512B302(1)2G5CA
C512B332(1)2G5CA
C512B362(1)2G5CA
C512B392(1)2G5CA
C512B432(1)2G5CA
C512B472(1)2G5CA
C512B562(1)2G5CA
C512B682(1)2G5CA
C512B822(1)2G5CA
C512B103(1)2G5CA
C512B123(1)2G5CA
C512B153(1)2G5CA
C512B183(1)2G5CA
C512B223(1)2G5CA
C512B273(1)2G5CA
C512B333(1)2G5CA
CAPACITANCE
pF
KEMET
PART NUMBER
50 VOLT - BP- STYLE C512
120,000
150,000
C512B124(1)5G5CA
C512B154(1)5G5CA
200 VOLT - BX - STYLE C512
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
C512B393(1)2X5CA
C512B473(1)2X5CA
C512B563(1)2X5CA
C512B683(1)2X5CA
C512B823(1)2X5CA
C512B104(1)2X5CA
C512B124(1)2X5CA
C512B154(1)2X5CA
C512B184(1)2X5CA
C512B224(1)2X5CA
C512B274(1)2X5CA
C512B334(1)2X5CA
C512B394(1)2X5CA
100 VOLT - BX - STYLE C512
470,000
560,000
680,000
820,000
1,000,000
C512B474(1)1X5CA
C512B564(1)1X5CA
C512B684(1)1X5CA
C512B824(1)1X5CA
C512B105(1)1X5CA
50 VOLT - BX - STYLE C512
1,200,000
1,500,000
2,000,000
2,200,000
3,300,000
C512B125(1)5X5CA
C512B155(1)5X5CA
C512B205(1)5X5CA
C512B225(1)5X5CA
C512B335(1)5X5CA
100 VOLT - BP- STYLE C512
39,000
47,000
56,000
68,000
82,000
100,000
C512B393(1)1G5CA
C512B473(1)1G5CA
C512B563(1)1G5CA
C512B683(1)1G5CA
C512B823(1)1G5CA
C512B104(1)1G5CA
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on
page 13.
BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0 thru 9.1pF
only) TEMPERATURE CHARACTERISTIC “G”
BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X”
(2) Capacitance values shown above are standard. Other capacitance values are available upon request.
16
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
CAPACITOR OUTLINE DRAWINGS
*Add .38mm (.015") to the positive width and thickness tolerance dimensions and .64mm (.025") to the positive length tolerance dimension for the Sn60 solder coated product.
DIMENSIONS — MILLIMETERS (INCHES)
Size
Code
0504
0805
1005
1206
1210
1805
1808
1812
1825
2225
L
W
Length
Width
1.269 (.050) ± 0.254 (.010) 1.015 (.040) ± 0.254 (.010)
2.03 (.080) ± 0.38 (.015) 1.27 (.050) ± 0.38 (.015)
2.56 (.100) ± 0.38 (.015) 1.27 (.050) ± 0.38 (.015)
3.07 (.120) ± 0.38 (.015) 1.52 (.060) ± 0.38 (.015)
3.07 (.120) ± 0.38 (.015) 2.56 (.100) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 1.27 (.050) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 2.03 (.080) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 3.18 (.125) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015) 6.35 (.250) ± 0.38 (.015)
5.59 (.220) ± 0.38 (.015) 6.35 (.250) ± 0.38 (.015)
T
Thickness
Max.
1.142 (.045)
1.4 (.055)
1.5 (.059)
1.6 (.065)
1.6 (.065)
1.4 (.055)
1.6 (.065)
2.03 (.080)
2.03 (.080)
2.03 (.080)
ORDERING INFORMATION
C 0805 A 103 K 5 X A C
END METALLIZATION
CERAMIC
SIZE CODE
C—Tin-Plated
H—Solder-Coated
L—70/30 Tin/Lead Plated
G—Gold Plated
See table above
SPECIFICATION
A — KEMET GR900 (CHIPS); Q — MIL-PRF-123 In Process & Group A
CAPACITANCE CODE
FAILURE RATE LEVEL
(%/1,000 HOURS)
Expressed in Picofarads (pF)
First two digit-significant figures.
Third digit-number of zeros. (Use 9 for 1.0 thru 9.9 pF.
Example: 2.2 pF — 229).
A—Standard—Not applicable
CAPACITANCE TOLERANCE
M — ±20%
K — ±10%
J — ±5%
G — ±2% (G(BP) Temperature Characteristic Only)
F — ±1% (G(BP) Temperature Characteristic Only)
*D — ±0.5 pF (G(BP) Temperature Characteristic Only)
*C — ±0.25 pF (G(BP) Temperature Characteristic Only)
TEMPERATURE CHARACTERISTIC
Designated by Capacitance Change over
Temperature Range
G—BP (±30 PPM/°C)
X—BX (±15%, +15%, -25% with bias.)
*These tolerances available only for 1.0 through 10 pF capacitors.
VOLTAGE
1—100
2—200
5—50
MARKING
Capacitors shall be legibly laser marked in contrasting color with
the KEMET trademark and 2-digit capacitance symbol.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
17
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C0504
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT - BP
C0504A109(1)2GA(2)
C0504A119(1)2GA(2)
C0504A129(1)2GA(2)
C0504A159(1)2GA(2)
C0504A169(1)2GA(2)
C0504A189(1)2GA(2)
C0504A209(1)2GA(2)
C0504A229(1)2GA(2)
C0504A249(1)2GA(2)
C0504A279(1)2GA(2)
C0504A309(1)2GA(2)
C0504A339(1)2GA(2)
C0504A369(1)2GA(2)
C0504A399(1)2GA(2)
C0504A439(1)2GA(2)
C0504A479(1)2GA(2)
C0504A519(1)2GA(2)
C0504A569(1)2GA(2)
C0504A629(1)2GA(2)
C0504A689(1)2GA(2)
C0504A759(1)2GA(2)
C0504A829(1)2GA(2)
C0504A919(1)2GA(2)
C0504A100(1)2GA(2)
C0504A110(1)2GA(2)
C0504A120(1)2GA(2)
C0504A130(1)2GA(2)
C0504A150(1)2GA(2)
C0504A160(1)2GA(2)
C0504A180(1)2GA(2)
C0504A200(1)2GA(2)
C0504A220(1)2GA(2)
C0504A240(1)2GA(2)
C0504A270(1)2GA(2)
C0504A300(1)2GA(2)
C0504A330(1)2GA(2)
C0504A360(1)2GA(2)
C0504A390(1)2GA(2)
C0504A430(1)2GA(2)
C0504A470(1)2GA(2)
C0504A510(1)2GA(2)
C0504A560(1)2GA(2)
C0504A620(1)2GA(2)
C0504A750(1)2GA(2)
C0504A820(1)2GA(2)
100 VOLT - BP
C0504A910(1)1GA(2)
C0504A101(1)1GA(2)
C0504A111(1)1GA(2)
C0504A121(1)1GA(2)
C0504A131(1)1GA(2)
50 VOLT - BP
C0504A151(1)5GA(2)
C0504A161(1)5GA(2)
C0504A181(1)5GA(2)
1.0
1.1
1.2
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
75.0
82.0
91.0
100
110
120
130
150
160
180
CAPACITANCE
KEMET
pF
PART NUMBER
200 VOLT - BX
18
220
270
330
C0504A221(1)2XA(2)
C0504A271(1)2XA(2)
C0504A331(1)2XA(2)
100 VOLT - BX
360
390
470
560
680
820
1000
1200
C0504A361(1)1XA(2)
C0504A391(1)1XA(2)
C0504A471(1)1XA(2)
C0504A561(1)1XA(2)
C0504A681(1)1XA(2)
C0504A821(1)1XA(2)
C0504A102(1)1XA(2)
C0504A122(1)1XA(2)
CAPACITANCE
pF
1500
1800
2200
2700
3300
3900
4700
5600
6800
KEMET
PART NUMBER
50 VOLT - BX
C0504A152(1)5XA(2)
C0504A182(1)5XA(2)
C0504A222(1)5XA(2)
C0504A272(1)5XA(2)
C0504A332(1)5XA(2)
C0504A392(1)5XA(2)
C0504A472(1)5XA(2)
C0504A562(1)5XA(2)
C0504A682(1)5XA(2)
STYLE C0805
CAPACITANCE
pF
1.0
1.1
1.2
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
75.0
82.0
91.0
100
110
120
130
150
160
180
200
220
KEMET
PART NUMBER
200 VOLT - BP
C0805A109(1)2GA(2)
C0805A119(1)2GA(2)
C0805A129(1)2GA(2)
C0805A159(1)2GA(2)
C0805A169(1)2GA(2)
C0805A189(1)2GA(2)
C0805A209(1)2GA(2)
C0805A229(1)2GA(2)
C0805A249(1)2GA(2)
C0805A279(1)2GA(2)
C0805A309(1)2GA(2)
C0805A339(1)2GA(2)
C0805A369(1)2GA(2)
C0805A399(1)2GA(2)
C0805A439(1)2GA(2)
C0805A479(1)2GA(2)
C0805A519(1)2GA(2)
C0805A569(1)2GA(2)
C0805A629(1)2GA(2)
C0805A689(1)2GA(2)
C0805A759(1)2GA(2)
C0805A829(1)2GA(2)
C0805A919(1)2GA(2)
C0805A100(1)2GA(2)
C0805A110(1)2GA(2)
C0805A120(1)2GA(2)
C0805A130(1)2GA(2)
C0805A150(1)2GA(2)
C0805A160(1)2GA(2)
C0805A180(1)2GA(2)
C0805A200(1)2GA(2)
C0805A220(1)2GA(2)
C0805A240(1)2GA(2)
C0805A270(1)2GA(2)
C0805A300(1)2GA(2)
C0805A330(1)2GA(2)
C0805A360(1)2GA(2)
C0805A390(1)2GA(2)
C0805A430(1)2GA(2)
C0805A470(1)2GA(2)
C0805A510(1)2GA(2)
C0805A560(1)2GA(2)
C0805A620(1)2GA(2)
C0805A750(1)2GA(2)
C0805A820(1)2GA(2)
C0805A910(1)2GA(2)
C0805A101(1)2GA(2)
C0805A111(1)2GA(2)
C0805A121(1)2GA(2)
C0805A131(1)2GA(2)
C0805A151(1)2GA(2)
C0805A161(1)2GA(2)
C0805A181(1)2GA(2)
C0805A201(1)2GA(2)
C0805A221(1)2GA(2)
CAPACITANCE
pF
240
270
300
330
360
390
430
470
510
560
KEMET
PART NUMBER
100 VOLT - BP
C0805A241(1)1GA(2)
C0805A271(1)1GA(2)
C0805A301(1)1GA(2)
C0805A331(1)1GA(2)
C0805A361(1)1GA(2)
C0805A391(1)1GA(2)
C0805A431(1)1GA(2)
C0805A471(1)1GA(2)
50 VOLT - BP
C0805A511(1)5GA(2)
C0805A561(1)5GA(2)
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT - BX
C0805A181(1)2XA(2)
C0805A221(1)2XA(2)
C0805A271(1)2XA(2)
C0805A331(1)2XA(2)
C0805A391(1)2XA(2)
C0805A471(1)2XA(2)
C0805A561(1)2XA(2)
C0805A681(1)2XA(2)
C0805A821(1)2XA(2)
100 VOLT - BX
1000
C0805A102(1)1XA(2)
1200
C0805A122(1)1XA(2)
1500
C0805A152(1)1XA(2)
1800
C0805A182(1)1XA(2)
2200
C0805A222(1)1XA(2)
3300
C0805A332(1)1XA(2)
3900
C0805A392(1)1XA(2)
4700
C0805A472(1)1XA(2)
50 VOLT - BX
C0805A562(1)5XA(2)
6800
C0805A682(1)5XA(2)
8200
C0805A822(1)5XA(2)
10000
C0805A103(1)5XA(2)
180
220
270
330
390
470
560
680
820
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering
information on page 17.
BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%,
±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0
thru 10pF only) TEMPERATURE CHARACTERISTIC “G”
BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20%
TEMPERATURE CHARACTERISTIC “X”
(2) Complete part number by inserting end Metallization,
as applicable as shown in ordering information on page
17.
C—Tin-Coated, Final (SolderGuard II)
H—Solder-Coated, Final (SolderGuard I)
L—70/30 Tin/Lead Plated
G—Gold Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C1005
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
1.0
1.1
1.2
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
75.0
82.0
91.0
100
110
120
130
150
160
C1005A109(1)2GA(2)
C1005A119(1)2GA(2)
C1005A129(1)2GA(2)
C1005A159(1)2GA(2)
C1005A169(1)2GA(2)
C1005A189(1)2GA(2)
C1005A209(1)2GA(2)
C1005A229(1)2GA(2)
C1005A249(1)2GA(2)
C1005A279(1)2GA(2)
C1005A309(1)2GA(2)
C1005A339(1)2GA(2)
C1005A369(1)2GA(2)
C1005A399(1)2GA(2)
C1005A439(1)2GA(2)
C1005A479(1)2GA(2)
C1005A519(1)2GA(2)
C1005A569(1)2GA(2)
C1005A689(1)2GA(2)
C1005A759(1)2GA(2)
C1005A829(1)2GA(2)
C1005A919(1)2GA(2)
C1005A100(1)2GA(2)
C1005A110(1)2GA(2)
C1005A120(1)2GA(2)
C1005A130(1)2GA(2)
C1005A150(1)2GA(2)
C1005A160(1)2GA(2)
C1005A180(1)2GA(2)
C1005A200(1)2GA(2)
C1005A220(1)2GA(2)
C1005A240(1)2GA(2)
C1005A270(1)2GA(2)
C1005A300(1)2GA(2)
C1005A330(1)2GA(2)
C1005A360(1)2GA(2)
C1005A390(1)2GA(2)
C1005A430(1)2GA(2)
C1005A470(1)2GA(2)
C1005A510(1)2GA(2)
C1005A560(1)2GA(2)
C1005A620(1)2GA(2)
C1005A750(1)2GA(2)
C1005A820(1)2GA(2)
C1005A910(1)2GA(2)
C1005A101(1)2GA(2)
C1005A111(1)2GA(2)
C1005A121(1)2GA(2)
C1005A131(1)2GA(2)
C1005A151(1)2GA(2)
C1005A161(1)2GA(2)
KEMET
PART NUMBER
200 VOLT - BP
180
200
220
240
270
300
330
360
390
430
470
C1005A181(1)2GA(2)
C1005A201(1)2GA(2)
C1005A221(1)2GA(2)
C1005A241(1)2GA(2)
C1005A271(1)2GA(2)
C1005A301(1)2GA(2)
C1005A331(1)2GA(2)
C1005A361(1)2GA(2)
C1005A391(1)2GA(2)
C1005A431(1)2GA(2)
C1005A471(1)2GA(2)
100 VOLT - BP
510
560
620
680
750
820
C1005A511(1)1GA(2)
C1005A561(1)1GA(2)
C1005A621(1)1GA(2)
C1005A681(1)1GA(2)
C1005A751(1)1GA(2)
C1005A821(1)1GA(2)
50 VOLT - BP
910
1000
1100
1200
C1005A911(1)5GA(2)
C1005A102(1)5GA(2)
C1005A112(1)5GA(2)
C1005A122(1)5GA(2)
200 VOLT - BX
330
390
470
560
680
820
1000
1200
1500
1800
C1005A331(1)2XA(2)
C1005A391(1)2XA(2)
C1005A471(1)2XA(2)
C1005A561(1)2XA(2)
C1005A681(1)2XA(2)
C1005A821(1)2XA(2)
C1005A102(1)2XA(2)
C1005A122(1)2XA(2)
C1005A152(1)2XA(2)
C1005A182(1)2XA(2)
100 VOLT - BX
2200
2700
3300
3900
4700
5600
6800
8200
10,000
C1005A222(1)1XA(2)
C1005A272(1)1XA(2)
C1005A332(1)1XA(2)
C1005A392(1)1XA(2)
C1005A472(1)1XA(2)
C1005A562(1)1XA(2)
C1005A682(1)1XA(2)
C1005A822(1)1XA(2)
C1005A103(1)1XA(2)
50 VOLT - BX
12,000
15,000
18,000
22,000
C1005A123(1)5XA(2)
C1005A153(1)5XA(2)
C1005A183(1)5XA(2)
C1005A223(1)5XA(2)
RATINGS AND PART NUMBER REFERENCE
STYLE C1206
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
C1206A100(1)2GA(2)
C1206A110(1)2GA(2)
C1206A120(1)2GA(2)
C1206A130(1)2GA(2)
C1206A150(1)2GA(2)
C1206A160(1)2GA(2)
C1206A180(1)2GA(2)
C1206A200(1)2GA(2)
C1206A220(1)2GA(2)
C1206A240(1)2GA(2)
KEMET
PART NUMBER
200 VOLT - BP
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
C1206A270(1)2GA(2)
C1206A300(1)2GA(2)
C1206A330(1)2GA(2)
C1206A360(1)2GA(2)
C1206A390(1)2GA(2)
C1206A430(1)2GA(2)
C1206A470(1)2GA(2)
C1206A510(1)2GA(2)
C1206A560(1)2GA(2)
C1206A620(1)2GA(2)
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on page 17.
BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0 thru 10pF only) TEMPERATURE CHARACTERISTIC “G”
BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X”
(2) Complete part number by inserting end Metallization, as applicable as shown in ordering information on page 17.
C—Tin-Coated, Final (SolderGuard II) H—Solder-Coated, Final (SolderGuard I) L—70/30 Tin Lead Plated G—Gold Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
19
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C1206 (continued)
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
68.0
75.0
82.0
91.0
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
C1206A680(1)2GA(2)
C1206A750(1)2GA(2)
C1206A820(1)2GA(2)
C1206A910(1)2GA(2)
C1206A101(1)2GA(2)
C1206A111(1)2GA(2)
C1206A121(1)2GA(2)
C1206A131(1)2GA(2)
C1206A151(1)2GA(2)
C1206A161(1)2GA(2)
C1206A181(1)2GA(2)
C1206A201(1)2GA(2)
C1206A221(1)2GA(2)
C1206A241(1)2GA(2)
C1206A271(1)2GA(2)
C1206A301(1)2GA(2)
C1206A331(1)2GA(2)
C1206A361(1)2GA(2)
C1206A391(1)2GA(2)
C1206A431(1)2GA(2)
C1206A471(1)2GA(2)
100 VOLT - BP
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
C1206A511(1)1GA(2)
C1206A561(1)1GA(2)
C1206A621(1)1GA(2)
C1206A681(1)1GA(2)
C1206A751(1)1GA(2)
C1206A821(1)1GA(2)
C1206A911(1)1GA(2)
C1206A102(1)1GA(2)
C1206A112(1)1GA(2)
C1206A122(1)1GA(2)
C1206A132(1)1GA(2)
C1206A152(1)1GA(2)
C1206A162(1)1GA(2)
KEMET
PART NUMBER
50 VOLT - BP
1800
2000
C1206A182(1)5GA(2)
C1206A202(1)5GA(2)
200 VOLT - BX
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
C1206A471(1)2XA(2)
C1206A561(1)2XA(2)
C1206A681(1)2XA(2)
C1206A821(1)2XA(2)
C1206A102(1)2XA(2)
C1206A122(1)2XA(2)
C1206A152(1)2XA(2)
C1206A182(1)2XA(2)
C1206A222(1)2XA(2)
C1206A272(1)2XA(2)
C1206A332(1)2XA(2)
C1206A392(1)2XA(2)
C1206A472(1)2XA(2)
100 VOLT - BX
5600
6800
8200
10,000
12,000
15,000
C1206A562(1)1XA(2)
C1206A682(1)1XA(2)
C1206A822(1)1XA(2)
C1206A103(1)1XA(2)
C1206A123(1)1XA(2)
C1206A153(1)1XA(2)
50 VOLT - BX
18,000
22,000
27,000
33,000
39,000
47,000
C1206A183(1)5XA(2)
C1206A223(1)5XA(2)
C1206A273(1)5XA(2)
C1206A333(1)5XA(2)
C1206A393(1)5XA(2)
C1206A473(1)5XA(2)
RATINGS AND PART NUMBER REFERENCE
STYLE C1210
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
68.0
75.0
82.0
91.0
100
110
120
20
C1210A100(1)2GA(2)
C1210A110(1)2GA(2)
C1210A120(1)2GA(2)
C1210A130(1)2GA(2)
C1210A150(1)2GA(2)
C1210A160(1)2GA(2)
C1210A180(1)2GA(2)
C1210A200(1)2GA(2)
C1210A220(1)2GA(2)
C1210A240(1)2GA(2)
C1210A270(1)2GA(2)
C1210A300(1)2GA(2)
C1210A330(1)2GA(2)
C1210A360(1)2GA(2)
C1210A390(1)2GA(2)
C1210A430(1)2GA(2)
C1210A470(1)2GA(2)
C1210A510(1)2GA(2)
C1210A560(1)2GA(2)
C1210A620(1)2GA(2)
C1210A680(1)2GA(2)
C1210A750(1)2GA(2)
C1210A820(1)2GA(2)
C1210A910(1)2GA(2)
C1210A101(1)2GA(2)
C1210A111(1)2GA(2)
C1210A121(1)2GA(2)
KEMET
PART NUMBER
200 VOLT - BP
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
C1210A131(1)2GA(2)
C1210A151(1)2GA(2)
C1210A161(1)2GA(2)
C1210A181(1)2GA(2)
C1210A201(1)2GA(2)
C1210A221(1)2GA(2)
C1210A241(1)2GA(2)
C1210A271(1)2GA(2)
C1210A301(1)2GA(2)
C1210A331(1)2GA(2)
C1210A361(1)2GA(2)
C1210A391(1)2GA(2)
C1210A431(1)2GA(2)
C1210A471(1)2GA(2)
C1210A511(1)2GA(2)
C1210A561(1)2GA(2)
C1210A621(1)2GA(2)
C1210A681(1)2GA(2)
C1210A751(1)2GA(2)
C1210A821(1)2GA(2)
C1210A911(1)2GA(2)
C1210A102(1)2GA(2)
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as
shown in ordering information on page 17.
BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF
tolerances available 1.0 thru 10pF only) TEMPERATURE CHARACTERISTIC “G”
BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE
CHARACTERISTIC “X”
(2) Complete part number by inserting end Metallization, as applicable as shown in
ordering information on page 17.
C—Tin-Coated, Final (SolderGuard II) H—Solder-Coated, Final (SolderGuard I)
L—70/30 Tin/Lead Plated G—Gold Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C1210 (continued)
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
100 VOLT - BP
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
C1210A112(1)1GA(2)
C1210A122(1)1GA(2)
C1210A132(1)1GA(2)
C1210A152(1)1GA(2)
C1210A162(1)1GA(2)
C1210A182(1)1GA(2)
C1210A202(1)1GA(2)
C1210A222(1)1GA(2)
C1210A242(1)1GA(2)
C1210A272(1)1GA(2)
C1210A302(1)1GA(2)
C1210A332(1)1GA(2)
50 VOLT - BP
3600
3900
C1210A362(1)5GA(2)
C1210A392(1)5GA(2)
200 VOLT - BX
470
560
680
820
1000
1200
1500
1800
C1210A471(1)2XA(2)
C1210A561(1)2XA(2)
C1210A681(1)2XA(2)
C1210A821(1)2XA(2)
C1210A102(1)2XA(2)
C1210A122(1)2XA(2)
C1210A152(1)2XA(2)
C1210A182(1)2XA(2)
KEMET
PART NUMBER
200 VOLT - BX
2200
2700
3300
3900
4700
5600
6800
8200
10,000
C1210A222(1)2XA(2)
C1210A272(1)2XA(2)
C1210A332(1)2XA(2)
C1210A392(1)2XA(2)
C1210A472(1)2XA(2)
C1210A562(1)2XA(2)
C1210A682(1)2XA(2)
C1210A822(1)2XA(2)
C1210A103(1)2XA(2)
100 VOLT - BX
12,000
15,000
18,000
22,000
27,000
33,000
C1210A123(1)1XA(2)
C1210A153(1)1XA(2)
C1210A183(1)1XA(2)
C1210A223(1)1XA(2)
C1210A273(1)1XA(2)
C1210A333(1)1XA(2)
50 VOLT - BX
39,000
47,000
56,000
68,000
82,000
100,000
C1210A393(1)5XA(2)
C1210A473(1)5XA(2)
C1210A563(1)5XA(2)
C1210A683(1)5XA(2)
C1210A823(1)5XA(2)
C1210A104(1)5XA(2)
RATINGS AND PART NUMBER REFERENCE
STYLE C1805
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
220
240
270
300
330
360
390
430
470
C1805A221(1)2GA(2)
C1805A241(1)2GA(2)
C1805A271(1)2GA(2)
C1805A301(1)2GA(2)
C1805A331(1)2GA(2)
C1805A361(1)2GA(2)
C1805A391(1)2GA(2)
C1805A431(1)2GA(2)
C1805A471(1)2GA(2)
100 VOLT - BP
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
C1805A511(1)1GA(2)
C1805A561(1)1GA(2)
C1805A621(1)1GA(2)
C1805A681(1)1GA(2)
C1805A751(1)1GA(2)
C1805A821(1)1GA(2)
C1805A911(1)1GA(2)
C1805A102(1)1GA(2)
C1805A112(1)1GA(2)
C1805A122(1)1GA(2)
C1805A132(1)1GA(2)
C1805A152(1)1GA(2)
50 VOLT - BP
1600
1800
2000
2200
KEMET
PART NUMBER
200 VOLT - BX
1200
1500
1800
2200
2700
3300
3900
C1805A122(1)2XA(2)
C1805A152(1)2XA(2)
C1805A182(1)2XA(2)
C1805A222(1)2XA(2)
C1805A272(1)2XA(2)
C1805A332(1)2XA(2)
C1805A392(1)2XA(2)
100 VOLT - BX
4700
5600
6800
8200
10,000
12,000
15,000
18,000
C1805A472(1)1XA(2)
C1805A562(1)1XA(2)
C1805A682(1)1XA(2)
C1805A822(1)1XA(2)
C1805A103(1)1XA(2)
C1805A123(1)1XA(2)
C1805A153(1)1XA(2)
C1805A183(1)1XA(2)
50 VOLT - BX
18,000
22,000
27,000
33,000
39,000
47,000
C1805A183(1)5XA(2)
C1805A223(1)5XA(2)
C1805A273(1)5XA(2)
C1805A333(1)5XA(2)
C1805A393(1)5XA(2)
C1805A473(1)5XA(2)
C1805A162(1)5GA(2)
C1805A182(1)5GA(2)
C1805A202(1)5GA(2)
C1805A222(1)5GA(2)
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on
page 17.
BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0 thru 10pF
only) TEMPERATURE CHARACTERISTIC “G”
BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X”
(2) Complete part number by inserting end Metallization, as applicable as shown in ordering information on page 17.
C—Tin-Coated, Final (SolderGuard II) H—Solder-Coated, Final (SolderGuard I)
L—70/30 Tin/Lead Plated G—Gold Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
21
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C1808
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
C1808A331(1)2GA(2)
C1808A361(1)2GA(2)
C1808A391(1)2GA(2)
C1808A431(1)2GA(2)
C1808A471(1)2GA(2)
C1808A511(1)2GA(2)
C1808A561(1)2GA(2)
C1808A621(1)2GA(2)
C1808A681(1)2GA(2)
C1808A751(1)2GA(2)
C1808A821(1)2GA(2)
C1808A911(1)2GA(2)
C1808A102(1)2GA(2)
C1808A112(1)2GA(2)
C1808A122(1)2GA(2)
C1808A132(1)2GA(2)
C1808A152(1)2GA(2)
100 VOLT - BP
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
C1808A162(1)1GA(2)
C1808A182(1)1GA(2)
C1808A202(1)1GA(2)
C1808A222(1)1GA(2)
C1808A242(1)1GA(2)
C1808A272(1)1GA(2)
C1808A302(1)1GA(2)
C1808A332(1)1GA(2)
C1808A362(1)1GA(2)
C1808A392(1)1GA(2)
C1808A432(1)1GA(2)
C1808A472(1)1GA(2)
KEMET
PART NUMBER
50 VOLT - BP
5100
5600
C1808A512(1)5GA(2)
C1808A562(1)5GA(2)
200 VOLT - BX
2200
2700
3300
3900
4700
5600
6800
8200
10,000
C1808A222(1)2XA(2)
C1808A272(1)2XA(2)
C1808A332(1)2XA(2)
C1808A392(1)2XA(2)
C1808A472(1)2XA(2)
C1808A562(1)2XA(2)
C1808A682(1)2XA(2)
C1808A822(1)2XA(2)
C1808A103(1)2XA(2)
100 VOLT - BX
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
C1808A123(1)1XA(2)
C1808A153(1)1XA(2)
C1808A183(1)1XA(2)
C1808A223(1)1XA(2)
C1808A273(1)1XA(2)
C1808A333(1)1XA(2)
C1808A393(1)1XA(2)
C1808A473(1)1XA(2)
50 VOLT - BX
39,000
47,000
56,000
68,000
82,000
100,000
C1808A393(1)5XA(2)
C1808A473(1)5XA(2)
C1808A563(1)5XA(2)
C1808A683(1)5XA(2)
C1808A823(1)5XA(2)
C1808A104(1)5XA(2)
RATINGS AND PART NUMBER REFERENCE
STYLE C1812
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
C1812A331(1)2GA(2)
C1812A361(1)2GA(2)
C1812A391(1)2GA(2)
C1812A431(1)2GA(2)
C1812A471(1)2GA(2)
C1812A511(1)2GA(2)
C1812A561(1)2GA(2)
C1812A621(1)2GA(2)
C1812A681(1)2GA(2)
C1812A751(1)2GA(2)
C1812A821(1)2GA(2)
C1812A911(1)2GA(2)
C1812A102(1)2GA(2)
C1812A112(1)2GA(2)
C1812A122(1)2GA(2)
C1812A132(1)2GA(2)
C1812A152(1)2GA(2)
C1812A162(1)2GA(2)
C1812A182(1)2GA(2)
C1812A202(1)2GA(2)
C1812A222(1)2GA(2)
C1812A242(1)2GA(2)
C1812A272(1)2GA(2)
100 VOLT - BP
3000
3300
3600
3900
4300
4700
5100
C1812A302(1)1GA(2)
C1812A332(1)1GA(2)
C1812A362(1)1GA(2)
C1812A392(1)1GA(2)
C1812A432(1)1GA(2)
C1812A472(1)1GA(2)
C1812A512(1)1GA(2)
KEMET
PART NUMBER
100 VOLT - BP
5600
6200
6800
C1812A562(1)1GA(2)
C1812A622(1)1GA(2)
C1812A682(1)1GA(2)
50 VOLT - BP
7500
8200
9100
10,000
C1812A752(1)5GA(2)
C1812A822(1)5GA(2)
C1812A912(1)5GA(2)
C1812A103(1)5GA(2)
200 VOLT - BX
6800
8200
10,000
12,000
15,000
18,000
C1812A682(1)2XA(2)
C1812A822(1)2XA(2)
C1812A103(1)2XA(2)
C1812A123(1)2XA(2)
C1812A153(1)2XA(2)
C1812A183(1)2XA(2)
100 VOLT - BX
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
C1812A223(1)1XA(2)
C1812A273(1)1XA(2)
C1812A333(1)1XA(2)
C1812A393(1)1XA(2)
C1812A473(1)1XA(2)
C1812A563(1)1XA(2)
C1812A683(1)1XA(2)
C1812A823(1)1XA(2)
50 VOLT - BX
82,000
100,000
120,000
150,000
180,000
C1812A823(1)5XA(2)
C1812A104(1)5XA(2)
C1812A124(1)5XA(2)
C1812A154(1)5XA(2)
C1812A184(1)5XA(2)
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on page 17. BP
CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0 thru 10pF only) TEMPERATURE
CHARACTERISTIC “G” BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X” (2) Complete part
number by inserting end Metallization, as applicable as shown in ordering information on page 17.
C—Tin-Coated, Final (SolderGuard II)
H—Solder-Coated, Final (SolderGuard I)
L—70/30 Tin/Lead Plated
G—Gold Plated
22
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC CHIPS HIGH RELIABILITY
GR 900 SERIES (BP/BX DIELECTRIC)
RATINGS AND PART NUMBER REFERENCE
STYLE C1825
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
2700
3000
3300
3600
3900
4300
4700
5100
5600
C1825A272(1)2GA(2)
C1825A302(1)2GA(2)
C1825A332(1)2GA(2)
C1825A362(1)2GA(2)
C1825A392(1)2GA(2)
C1825A432(1)2GA(2)
C1825A472(1)2GA(2)
C1825A512(1)2GA(2)
C1825A562(1)2GA(2)
100 VOLT - BP
6200
6800
7500
8200
9100
10,000
11,000
12,000
13,000
15,000
16,000
18,000
C1825A622(1)1GA(2)
C1825A682(1)1GA(2)
C1825A752(1)1GA(2)
C1825A822(1)1GA(2)
C1825A912(1)1GA(2)
C1825A103(1)1GA(2)
C1825A113(1)1GA(2)
C1825A123(1)1GA(2)
C1825A133(1)1GA(2)
C1825A153(1)1GA(2)
C1825A163(1)1GA(2)
C1825A183(1)1GA(2)
50 VOLT - BP
20,000
22,000
KEMET
PART NUMBER
200 VOLT - BX
10,000
12,000
15,000
18,000
22,000
33,000
39,000
47,000
C1825A103(1)2XA(2)
C1825A123(1)2XA(2)
C1825A153(1)2XA(2)
C1825A183(1)2XA(2)
C1825A223(1)2XA(2)
C1825A333(1)2XA(2)
C1825A393(1)2XA(2)
C1825A473(1)2XA(2)
100 VOLT - BX
56,000
68,000
82,000
100,000
120,000
150,000
180,000
C1825A563(1)1XA(2)
C1825A683(1)1XA(2)
C1825A823(1)1XA(2)
C1825A104(1)1XA(2)
C1825A124(1)1XA(2)
C1825A154(1)1XA(2)
C1825A184(1)1XA(2)
50 VOLT - BX
180,000
220,000
270,000
330,000
390,000
470,000
C1825A184(1)5XA(2)
C1825A224(1)5XA(2)
C1825A274(1)5XA(2)
C1825A334(1)5XA(2)
C1825A394(1)5XA(2)
C1825A474(1)5XA(2)
C1825A203(1)5GA(2)
C1825A223(1)5GA(2)
RATINGS AND PART NUMBER REFERENCE
STYLE C2225
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
200 VOLT - BP
2700
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
C2225A272(1)2GA(2)
C2225A302(1)2GA(2)
C2225A332(1)2GA(2)
C2225A362(1)2GA(2)
C2225A392(1)2GA(2)
C2225A432(1)2GA(2)
C2225A472(1)2GA(2)
C2225A512(1)2GA(2)
C2225A562(1)2GA(2)
C2225A622(1)2GA(2)
C2225A682(1)2GA(2)
C2225A752(1)2GA(2)
C2225A822(1)2GA(2)
100 VOLT - BP
9100
10,000
11,000
12,000
13,000
15,000
16,000
18,000
20,000
22,000
C2225A912(1)1GA(2)
C2225A103(1)1GA(2)
C2225A113(1)1GA(2)
C2225A123(1)1GA(2)
C2225A133(1)1GA(2)
C2225A153(1)1GA(2)
C2225A163(1)1GA(2)
C2225A183(1)1GA(2)
C2225A203(1)1GA(2)
C2225A223(1)1GA(2)
50 VOLT - BP
24,000
27,000
33,000
KEMET
PART NUMBER
200 VOLT - BX
18,000
22,000
27,000
33,000
39,000
47,000
C2225A183(1)2XA(2)
C2225A223(1)2XA(2)
C2225A273(1)2XA(2)
C2225A333(1)2XA(2)
C2225A393(1)2XA(2)
C2225A473(1)2XA(2)
100 VOLT - BX
56,000
68,000
82,000
100,000
120,000
150,000
180,000
C2225A563(1)1XA(2)
C2225A683(1)1XA(2)
C2225A823(1)1XA(2)
C2225A104(1)1XA(2)
C2225A124(1)1XA(2)
C2225A154(1)1XA(2)
C2225A184(1)1XA(2)
50 VOLT - BX
220,000
270,000
330,000
390,000
470,000
560,000
680,000
820,000
1,000,000
C2225A224(1)5XA(2)
C2225A274(1)5XA(2)
C2225A334(1)5XA(2)
C2225A394(1)5XA(2)
C2225A474(1)5XA(2)
C2225A564(1)5XA(2)
C2225A684(1)5XA(2)
C2225A824(1)5XA(2)
C2225A105(1)5XA(2)
C2225A243(1)5GA(2)
C2225A273(1)5GA(2)
C2225A333(1)5GA(2)
(1) Complete KEMET part number by inserting capacitance tolerance, as applicable as shown in ordering information on
page 17. BP CAPACITANCE TOLERANCE: ±1%, ±2%, ±5%, ±10%, ±20% (±0.5pF & ±0.25pF tolerances available 1.0
thru 10pF only) TEMPERATURE CHARACTERISTIC “G” BX CAPACITANCE TOLERANCE: ±5%, ±10%, ±20% TEMPERATURE CHARACTERISTIC “X”
(2) Complete part number by inserting end Metallization, as applicable as shown in ordering information on page 17.
C—Tin-Coated, Final (SolderGuard II)
H—Solder-Coated, Final (SolderGuard I)
L—70/30 Tin/Lead Plated
G—Gold Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
23