Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC Overview Applications KEMET S301 Series Supercapacitors utilize a proprietary electrode design to deliver a very high power density. This product features high power performance up to 3,000 F capacity in a weldable axial screw termination cell. Typical applications include automotive subsystems, engine starting, rail systems, hybrid drive trains, material handling/utility vehicles, regenerative brake energy capture, backup power, grid/power correction, and UPS/carry through power. Benefits • • • • • • • • • Weldable screw terminals Highest power performance available High power High rate cycling Long life Operating temperature range of -40˚C to +65˚C High cycle life > 1,000,000 cycles RoHS Compliant Made in USA Part Number System S301 RV 308 T 2R7 W Series Size Code (D x L) Capacitance Code (µF) Capacitance Tolerance Rated Voltage (VDC) Termination Code Supercapacitor, Screw Termination RP = 60.5 x 80.5 RS = 60.5 x 108.5 RV = 60.5 x 144 First two digits represent significant figures. Third digit specifies number of zeros. R = -0% 2R7 = 2.7 2 threaded inserts per end, 20 mm lead spacing, M6 One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 12/29/2014 1 Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC Dimensions – Millimeters L L2 M6 X 1.0 7.5 Safety Vent S1 D 2° Draft S Negative Mark 2° Draft LLNeg LLPos D Part Number L L2 S S1 LLNeg LLPos Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance S301RP128R2R7W 60.7 +/-0.3 80 +/-0.5 72.3 +/-0.5 20 +/-0.2 32.1 +/-0.1 4.6 +/-0.2 3.2 +/-0.1 S301RS208R2R7W 60.7 +/-0.3 108.5 +/-0.5 100.8 +/-0.5 20 +/-0.2 32.1 +/-0.1 4.6 +/-0.2 3.2 +/-0.1 S301RV308R2R7W 60.7 +/-0.3 144 +/-0.5 136.3 +/-0.5 20 +/-0.2 32.1 +/-0.1 4.6 +/-0.2 3.2 +/-0.1 Performance Characteristics Item Performance Characteristics Rated Voltage 2.7 VDC Surge Voltage 2.85 VDC Capacitance Range Capacitance Tolerance 1,200 – 3,000 F -0% Temperature Range -40°C to +65°C Storage Temperature Range -40°C to +70°C Life, DC Life, Endurance Life, Shelf Life, Cycle Standards Compliance 10 years, rated voltage, 25°C Δ C < 20% decrease, ESR < 100% increase 1,000 hours, rated voltage, 65°C Δ C < 20% decrease, ESR < 100% increase 1,000 hours, no voltage, 70°C Δ C < 20% decrease, ESR < 100% increase > 1,000,000 cycles, rated to half rated voltage, 25°C Δ C < 20% decrease, ESR < 100% increase RoHS, UL810a, BS EN 60068-2-14, Chinese RoHS, CE SAE © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 12/29/2014 2 Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC Approvals Series / Partnumber Test Type Test Standard Date completed (or estimated) IEC 60068-2-6 Vibration S301RP128R2R7W S301RV308R2R7W SAE J2380 ISO 16750-3 May 2013 Mechanical shock IEC 60068-2-27 Underwriters Laboratory UL-810A 2 by Part number SAE Safety And Abuse SAE J24645 3 pending 12/31/2013 S301RS208R2R7W pending 1 Pending Part Numbers require significant production runs and UL Certification UL-810A includes the following tests: Short Circuit, Abnormal Charge, Heating, Crush, Impact, Shock, Vibration 3 SAE J2464 Includes the following tests: Nail Penetration, Crush, Thermal Stability, Thermal Shock, Short Ciruit, Overcharge, Forced Vent 1 2 Environmental Compliance All KEMET supercapacitors are RoHS Compliant. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 12/29/2014 3 Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC Table 1 – Ratings & Part Number Reference Part Number S301RP128R2R7W S301RS208R2R7W S301RV308R2R7W 1200 2000 3000 -0 -0 -0 Electrical Capacitance (F) Capacitance Tolerance Rated Voltage (V) 2.7 2.7 2.7 Surge Voltage (V) 2.85 2.85 2.85 ESR, DC ≤ (mΩ) [10 ms] 0.3 0.27 0.26 ESR, AC 1 kHz ≤ (mΩ) 0.25 0.23 0.2 Inductance ±20 (nH) 60 60 60 72 Hour Leakage ≤ (mA) 2 2 5 1200 1800 2200 Continuous Current (A)* 90 130 145 Current, Short Circuit (A) 10,000 10,000 10,000 3.5 4 Cycling Current, Peak [1s] (A) Thermal Resistance, Thermal (°C/W) 5 Energy/Power Maximum Stored Energy (Wh) 1.22 2.03 3.04 Energy Density (Wh/kg) 4.1 5.5 6 Energy Density (Wh/L) 6.2 6.5 7.7 Power Density (kW/kg) 20 18.2 13.7 Power Density (kW/L) 31 21.7 17.7 Maximum Power (kW/kg) 9.9 8.8 6.6 Size Code RP RS RV D x L (mm) 60.7 x 80 60.7 x 108.5 60.7 x 144 Weight (kg) 0.29 0.37 0.51 Volume (L) 0.196 0.196 0.397 Volume of ACN (L) 0.093 Screw Threads M6X1 M6X1 M6X1 5 Nm (44 Inch/Lbs) 5 Nm (44 Inch/Lbs) 5 Nm (44 Inch/Lbs) Physical Maximum Torque 0.24 *Rated current = continuous current with 20°C temperature rise. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 12/29/2014 4 Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC Mounting Do not scratch or file the lead terminals. The terminals are plated with metal and the removal of the plated material will cause poor solderability. Do not overheat when soldering. Solder temperature lower than 260°C and time shorter than 5 seconds are recommended. For hand soldering, tip temperature should be no higher than 350°C (662°F) for a maximum contact time of 3 seconds. Only the snap-in terminals should come into contact with liquid solder or iron. Excessive heat on the snap-in terminal boards can cause damage to seals, shrink sleeve, and electrodes resulting in shortened life or premature part failure. Packaging Quantities Part Number Capacitance (F) Rated Voltage S301RP128R2R7W 1200 2.7 S301RS208R2R7W 2000 2.7 S301RV308R2R7W 3000 2.7 Package Type Box with Cardboard Separators Package Quantity Box Weight Box Length Box Width Box Height 15 10.1 lbs (4.6 Kgs) 13.0" (330 mm) 8.0" (203 mm) 4.0" (102 mm) 15 15.0 lbs (6,8 Kgs) 13.0" (330 mm) 8.0" (203 mm) 4.0" (102 mm) 6 8 lbs (3.7 kgs) 9.0" (229 mm) 7.0" (178 mm) 6.5" (165 mm) Standard Marking • KEMET logo • Rated capacitance • Rated voltage • Product number • Negative terminal marking • Energy in Wh © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 12/29/2014 5 Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Harlow, United Kingdom Tel: 44-1279-460122 Taipei, Taiwan Tel: 886-2-27528585 Espoo, Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 Central Novi, MI Tel: 248-306-9353 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 12/29/2014 6 Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. Prototype Sample Disclaimer The Customer acknowledges the following limitations of the prototype samples: (1) Prototype samples are manufactured from preliminary designs and manufacturing processes, may not represent final designs, have not been released for commercial use and are not subject to the same quality control procedures applicable to released products; (2) Prototype samples are not qualified parts and are provided as-is by KEMET Electronics Corporation, which specifically disclaims any and all warranties and guarantees, explicit or implied, including without limitation the warranties of merchantability and fitness for a particular purpose or use; (3) Prototype samples are not intended for commercial use, are provided for engineering evaluation only and are not recommended for use in the Customer’s production line; and (4) The Customer assumes the risk of any and all uses that the Customer makes of the prototype samples. Prototype Copyright Notice COPYRIGHT KEMET ELECTRONICS CORPORATION 2013, all rights reserved © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 12/29/2014 7