Tantalum Through-Hole Capacitors – Molded Radial T330 Series Precision Molded Polar Overview KEMET T330 Series polar-type, radial lead, rectangular Precision Molded Tantalum (PMT) capacitors are primarily designed for applications that demand full use of the premium space available in printed circuitry and high density packaging. Compact, space saving T330 Series capacitors provide superior packing factor and space utilization as compared with tubular units of the same microcoulomb (CV) rating. T330 Series capacitors employ a rectangular sintered, dry tantalum anode, transfer molded in precision dies with a highimpact resistant plastic for excellent electrical, physical and moisture resistant properties. All cases are constructed with a gold color plastic which permits laser marking with outstanding permanency and legibility. The polarity is indicated by a + sign permanently marked on the case. The radius on the two vertical edges at the positive end of B, C, and D cases can be used as a sensing dimension for automatic insertion processes. The location of the standoffs may serve a similar sensing function for the A case. These standoffs, located in the base of all case sizes, provide vents for air circulation and also allow easy removal of flux residues from lead wire and circuit board solder joints. T330 Series capacitors are highly reliable and exhibit performance characteristics typical of military test standards. They are available in capacitance values ranging from 0.1 μF to 220 μF in ±20%, ±10%, and ±5% tolerance levels and in working voltages from 6 VDC to 50 VDC. The capacitors will operate continuously at full rated voltage at 85°C and are rated to 125°C when operated at 2/3 of nameplate voltage. In addition, the T330 Series features exceptionally low DC leakage and dissipation factor characteristics. These parts are ideal for bypass, coupling, and timing applications in computers, military ordinance, industrial, entertainment and consumer electronic equipment. Benefits Applications • • • • • • • Typical applications include bypassing, coupling, and timing applications in computers, military ordinance, industrial, entertainment, and consumer electronic equipment. Taped and reeled per EIA Specification RS-468 Laser-marked case Capacitance values of 0.1 μF to 220 μF Tolerances of ±20% standard, ±5% and ±10% special order Voltage rating of 6 – 50 VDC Operating temperature range of -55˚C to +125˚C Case sizes: A, B, C, D One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2040_T330 • 3/19/2015 1 Tantalum Through-Hole Capacitors – Molded Radial T330 Series Precision Molded Polar Ordering Information T 330 Capacitor Class T= Tantalum Series Radial Lead Precision Molded Polar Solid Tantalum 035 A S Case Capacitance Capacitance Code (pF) Size Tolerance B 104 Rated Voltage (VDC) Failure Rate Termination Finish A, B, C, D 006 = 6 010 = 10 015 = 15 020 = 20 025 = 25 035 = 35 050 = 50 First two digits represent significant figures. Third digit specifies number of zeros to follow. M K = ±10% M = ±20% J = ±5% (available on request) Not Applicable S = Standard (Solder-coated nickel) T = 100% tin (Sn) plated Specification 7301 = Tape & Reel 7305 & 7317 = Ammo Performance Characteristics Item Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range Performance Characteristics -55°C to 125°C 0.1 – 220 μF @ 120 Hz/25°C M Tolerance (20%) standard, K Tolerance (10%), J Tolerance (5%) special order 6 - 50V DF (120 Hz @ 25°C) Refer to Part Number Electrical Specification Table ESR and Impedance (100 kHz @ 25°C) Refer to Part Number Electrical Specification Table (for reference only) Leakage Current Refer to Part Number Electrical Specification Table (@ rated voltage up to +85°C and 2/3 of rated voltage applied at 125°C) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2040_T330 • 3/19/2015 2 Tantalum Through-Hole Capacitors – Molded Radial T330 Series Precision Molded Polar Dimensions – Millimeters (Inches) Metric will govern 0.015 Case Size H Case Height 0.345 ±0.008 (8.76 ±0.203) 0.225 ±0.015 (5.71 ±0.38) 0.325 ±0.015 (8.26 ±0.38) 0.375 ±0.015 (9.53 ±0.38) A B C D W Case Width T Case Thickness 0.230 ±0.005 (5.84 ±0.127) 0.285 ±0.015 (7.24 ±0.38) 0.325 ±0.015 (8.26 ±0.38) 0.600 ±0.015 (15.24 ±0.38) 0.105 ±0.005 (2.67 ±0.127) 0.170 ±0.015 (4.32 ±0.38) 0.170 ±0.015 (4.32 ±0.38) 0.195 ±0.015 (4.95 ±0.38) E Case to Wire 0.050 ±0.010 (1.27 ±0.25) 0.042 ±0.010 (1.07 ±0.25) 0.062 ±0.010 (1.57 ±0.25) 0.200 ±0.010 (5.08 ±0.25) S Lead Spacing 0.125 ±0.005 (3.18 ±0.127) 0.200 ±0.005 (5.08 ±0.127) 0.200 ±0.005 (5.08 ±0127) 0.200 ±0.005 (5.08 ±0.127) Table 1 – Ratings & Part Number Reference Rated Voltage Rated Capacitance V µF 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 18.0 22.0 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 V µF Rated Voltage Rated Capacitance Case Code KEMET Part Number DC Leakage DF A A B B B B B C C C C C C D D D D (See below for part options) T330A186(1)006AS T330A226(1)006AS T330B106(1)006AS T330B126(1)006AS T330B156(1)006AS T330B186(1)006AS T330B226(1)006AS T330C276(1)006AS T330C336(1)006AS T330C396(1)006AS T330C476(1)006AS T330C566(1)006AS T330C686(1)006AS T330D826(1)006AS T330D107(1)006AS T330D127(1)006AS T330D157(1)006AS (see below for part options) µA @ 25°C Maximum/5 Minutes 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 5.0 5.0 5.0 5.0 5.0 5.0 µA @ 25°C Maximum/5 Minutes % @ 25°C 120 Hz Maximum 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 % @ 25°C 120 Hz Maximum Case Code KEMET Part Number DC Leakage DF (1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Higher voltage and better capacitance tolerance products may be substituted for an order within the same case size at KEMET's option. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2040_T330 • 3/19/2015 3 Tantalum Through-Hole Capacitors – Molded Radial T330 Series Precision Molded Polar Table 1 – Ratings & Part Number Reference Rated Voltage Rated Capacitance V µF 6 6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 25 25 25 25 25 25 25 25 25 180.0 220.0 10.0 12.0 15.0 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 8.2 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 5.6 6.8 3.3 3.9 4.7 2.7 3.3 3.9 4.7 5.6 6.8 V µF Rated Voltage Rated Capacitance Case Code KEMET Part Number DC Leakage DF D D A A A B B B B B B B B C C C C C D D D D D D D A B B B B B C C C C C C C D D D D D A A A A A B B B B C C (See below for part options) T330D187(1)006AS T330D227(1)006AS T330A106(1)010AS T330A126(1)010AS T330A156(1)010AS T330B565(1)010AS T330B685(1)010AS T330B825(1)010AS T330B106(1)010AS T330B126(1)010AS T330B156(1)010AS T330B186(1)010AS T330B226(1)010AS T330C186(1)010AS T330C226(1)010AS T330C276(1)010AS T330C336(1)010AS T330C396(1)010AS T330D476(1)010AS T330D566(1)010AS T330D686(1)010AS T330D826(1)010AS T330D107(1)010AS T330D127(1)010AS T330D157(1)010AS T330A825(1)015AS T330B395(1)015AS T330B475(1)015AS T330B565(1)015AS T330B685(1)015AS T330B825(1)015AS T330C106(1)015AS T330C126(1)015AS T330C156(1)015AS T330C186(1)015AS T330C226(1)015AS T330C276(1)015AS T330C336(1)015AS T330D396(1)015AS T330D476(1)015AS T330D566(1)015AS T330D686(1)015AS T330D826(1)015AS T330A565(1)020A(2) T330A685(1)020AS T330A335(1)025AS T330A395(1)025AS T330A475(1)025A(2) T330B275(1)025AS T330B335(1)025AS T330B395(1)025AS T330B475(1)025AS T330C565(1)025AS T330C685(1)025AS (see below for part options) µA @ 25°C Maximum/5 Minutes 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 1.0 2.0 2.0 2.0 5.0 5.0 5.0 5.0 5.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 5.0 5.0 5.0 5.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 µA @ 25°C Maximum/5 Minutes % @ 25°C 120 Hz Maximum 6 8 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 4 4 6 6 6 6 6 6 % @ 25°C 120 Hz Maximum Case Code KEMET Part Number DC Leakage DF (1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Higher voltage and better capacitance tolerance products may be substituted for an order within the same case size at KEMET's option. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2040_T330 • 3/19/2015 4 Tantalum Through-Hole Capacitors – Molded Radial T330 Series Precision Molded Polar Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Capacitance V µF 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 V µF Rated Voltage Rated Capacitance Case Code KEMET Part Number DC Leakage DF C C C C D D D D D D A A A A A A A A A A A A A A A A A A B B B B B B B B B B B B B B B B B B B C C C C C C D D (See below for part options) T330C825(1)025AS T330C106(1)025AS T330C126(1)025AS T330C156(1)025A(2) T330D186(1)025AS T330D226(1)025AS T330D276(1)025AS T330D336(1)025AS T330D396(1)025AS T330D476(1)025AS T330A104(1)035AS T330A124(1)035AS T330A154(1)035AS T330A184(1)035AS T330A224(1)035AS T330A274(1)035AS T330A334(1)035AS T330A394(1)035AS T330A474(1)035A(2) T330A564(1)035AS T330A684(1)035AS T330A824(1)035AS T330A105(1)035AS T330A125(1)035AS T330A155(1)035AS T330A185(1)035AS T330A225(1)035AS T330A275(1)035AS T330B104(1)035AS T330B124(1)035AS T330B154(1)035AS T330B184(1)035AS T330B224(1)035AS T330B274(1)035AS T330B334(1)035AS T330B394(1)035AS T330B474(1)035AS T330B564(1)035AS T330B684(1)035AS T330B824(1)035AS T330B105(1)035AS T330B125(1)035AS T330B155(1)035AS T330B185(1)035AS T330B225(1)035AS T330B275(1)035AS T330B335(1)035AS T330C395(1)035AS T330C475(1)035AS T330C565(1)035AS T330C685(1)035AS T330C825(1)035AS T330C106(1)035AS T330D126(1)035AS T330D156(1)035AS (see below for part options) µA @ 25°C Maximum/5 Minutes 1.0 1.0 1.0 2.0 5.0 5.0 5.0 5.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 5.0 5.0 5.0 5.0 µA @ 25°C Maximum/5 Minutes % @ 25°C 120 Hz Maximum 6 6 6 6 6 6 6 6 6 6 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 % @ 25°C 120 Hz Maximum Case Code KEMET Part Number DC Leakage DF (1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Higher voltage and better capacitance tolerance products may be substituted for an order within the same case size at KEMET's option. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2040_T330 • 3/19/2015 5 Tantalum Through-Hole Capacitors – Molded Radial T330 Series Precision Molded Polar Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Capacitance V µF 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 18.0 22.0 27.0 33.0 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 V µF Rated Voltage Rated Capacitance Case Code KEMET Part Number DC Leakage DF D D D D A A A A A A A A A A A A A A A B B B B B B B B B B B B B B B B B C C C C C D D D D D D (See below for part options) T330D186(1)035AS T330D226(1)035AS T330D276(1)035AS T330D336(1)035AS T330A104(1)050AS T330A124(1)050AS T330A154(1)050AS T330A184(1)050AS T330A224(1)050AS T330A274(1)050AS T330A334(1)050AS T330A394(1)050AS T330A474(1)050AS T330A564(1)050AS T330A684(1)050AS T330A824(1)050AS T330A105(1)050AS T330A125(1)050AS T330A155(1)050AS T330B104(1)050AS T330B124(1)050AS T330B154(1)050AS T330B184(1)050AS T330B224(1)050AS T330B274(1)050AS T330B334(1)050AS T330B394(1)050AS T330B474(1)050AS T330B564(1)050AS T330B684(1)050AS T330B824(1)050AS T330B105(1)050A(2) T330B125(1)050AS T330B155(1)050AS T330B185(1)050AS T330B225(1)050AS T330C275(1)050AS T330C335(1)050AS T330C395(1)050AS T330C475(1)050AS T330C565(1)050AS T330D685(1)050AS T330D825(1)050AS T330D106(1)050AS T330D126(1)050AS T330D156(1)050AS T330D186(1)050AS (see below for part options) µA @ 25°C Maximum/5 Minutes 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 10.0 10.0 µA @ 25°C Maximum/5 Minutes % @ 25°C 120 Hz Maximum 6 6 6 6 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 % @ 25°C 120 Hz Maximum Case Code KEMET Part Number DC Leakage DF (1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Higher voltage and better capacitance tolerance products may be substituted for an order within the same case size at KEMET's option. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2040_T330 • 3/19/2015 6 Tantalum Through-Hole Capacitors – Molded Radial T330 Series Precision Molded Polar Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage that may be applied is limited by following criteria: 1. Dissipated power must not exceed the limits specified for the Series. 2. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 3. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. Thermal capacities for the various case sizes have been determined empirically and are listed below. The “ripple voltage” permissible may be calculated from the impedance and ESR data shown in the respective product section. Temperature Compensation Multipliers for Maximum Power Dissipation T ≤ 25°C 1.00 T ≤ 85°C 0.90 T ≤ 125°C 0.40 T= Environmental Temperature Maximum allowable rms ripple voltage or current may be determined as follows: I(max) = √P max/R E(max) = √P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = Maximum power dissipation (watts) R = ESR at specified frequency (ohms) Case Size A B C D Maximum Power Dissipation (Pmax) Watts @ 25°C 0.09 0.09 0.100 0.125 Optimum Solder Wave Profile © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2040_T330 • 3/19/2015 7 Tantalum Through-Hole Capacitors – Molded Radial T330 Series Precision Molded Polar Reverse Voltage Although these are polar capacitors, some degree of transient voltage reversal is permissible, as seen below. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Pecentage of Rated Voltage +25°C +85°C +125°C 15 5 1 Mounting All encased capacitors will pass the Resistance to Soldering Heat Test of MIL–STD–202, Method 210, Condition C. This test simulates wave solder of topside board mount product. This demonstration of resistance to solder heat is in accordance with what is believed to be the industry standard. More severe treatment must be considered reflective of an improper soldering process. The above figure is a recommended solder wave profile for both axial and radial leaded solid tantalum capacitors. Capacitor Marking T330 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2040_T330 • 3/19/2015 8 Tantalum Through-Hole Capacitors – Molded Radial T330 Series Precision Molded Polar Storage Tantalum molded radial capacitors should be stored in normal working environments. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 60°C RH. Storage at high temperature may cause a small, temporary increase in leakage current (measured under standard conditions), but the original value is usually restored within a few minutes after application of rated voltage. Storage at high humidity may increase capacitance and dissipation factor. Solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. For optimized solderability capacitors stock should be used promptly, preferably within three years of receipt. Tape & Reel Packaging Information KEMET Molded Radial Capacitors fully compatible with automatic insertion machines. Reeling meets EIA Standard RS-468. Reel & Ammo pack available. Notes: Reference only Cumulative pitch error ±1.0 mm (0.039") maximum in 20 consecutive sprocket hole locations. Measured at bottom of standoff. P, P1 and F measured at egress from carrier tape. The positive (+) lead exits from container first. Lead spacings are 5.0 mm (0.197") center-to-center. Table 2 – Packaging Quantity Case Size Standard Bulk Quantity Standard Reel Quantity Reel C-Spec Ammo Pack Quantity A 400 1000 C-7301 1600 B 300 1000 C-7301 1200 C 200 1000 C-7301 1200 D 100 N/A N/A N/A © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2040_T330 • 3/19/2015 9 Tantalum Through-Hole Capacitors – Molded Radial T330 Series Precision Molded Polar KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax:864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices FortLauderdale,FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Harlow, United Kingdom Tel: 44-1279-460122 Taipei, Taiwan Tel: 886-2-27528585 Espoo,Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Southeast LakeMary,FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 Central Novi, MI Tel: 248-306-9353 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2040_T330 • 3/19/2015 10 Tantalum Through-Hole Capacitors – Molded Radial T330 Series Precision Molded Polar Disclaimer Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2040_T330 • 3/19/2015 11