Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Overview The KEMET standard MIL case hermetically sealed T140 Series (Extended Capacitance Range) is compact, ruggedly built and designed for miniaturized circuitry. The capacitors are especially well-suited for coupling, bypass filtering and RC timing circuits. The T140 Series exhibits excellent stability, low DC leakage current, dissipation factor, and ESR/impedance over a wide temperature and frequency range. Available in standard EIA capacitance values from 0.82 µF to 1,200 µF in ±20% and ±10% tolerances and working voltages of 6 VDC to 60 VDC. Benefits Applications • • • • Typical applications include coupling, bypass, filtering and RC timing circuits in miniaturized circuitry. • • • • • Taped and reeled per EIA Specification RS–296 Marking per MIL–STD–1285 Qualified to MIL–PRF–39003 (CSR23 Style) Failure rate options: Graded - B, C, D and G Exponential - M, P, R, and S* Capacitance values of 0.82 μF to 1200 μF Tolerances of ±10% and ±20% Voltage rating of 6 VDC–60 VDC Operating temperature range of -55˚C to +125˚C Case sizes: A, B, C, D *Failure rates apply to military products only © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com One world. One KEMET T2034_T140_AXIAL_T242 • 3/6/2015 1 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Ordering Information – T140 T Capacitor Class T= Tantalum 140 A 105 Series Case Size Capacitance Code (pF) Capacitance Rated Voltage Tolerance (VDC) A, B, C, D First two digits represent significant figures. Third digit specifies number of zeros. K = ±10% M = ±20% Hermetically Sealed Axial Capacitor K 050 006 = 6 010 = 10 015 = 15 020 = 20 030 = 30 035 = 35 060 = 60 050 = 50 060 = 60 A S 7200 Failure Rate/Military Product Only Termination Finish Specification A = N/A S = Standard (Sn/Pb) T = 100% Tin All capacitors are sleeved unless specified. 0100 = Without sleeve 7200 = Tape & Reel 7293 & 7443 = Ammo 4250 = 10 cycles, 25°C after Weibull 4251 = 10 cycles, -55 & 85°C after Weibull 4252 = 10 cycles, -55 & 85°C before Weibull A S C Termination Finish Specification Ordering Information – T242 (CSR23 Style) T 242 A 105 K 050 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Rated Voltage Tolerance (VDC) Failure Rate/Military Product Only T= Tantalum T242 = CSR23 A, B, C, D First two digits represent significant figures. Third digit specifies number of zeros. K = ±10% M = ±20% Graded: S = Standard B = 0.1%/k hours C = 0.01%/k hours D = 0.001%/k hours G = 1.0%/k hours Exponential: M = 1%/k hours P = 0.1%/k hours R = 0.01%/k hours S = 0.001%/k hours 006 = 6 010 = 10 015 = 15 020 = 20 030 = 30 035 = 35 060 = 60 050 = 50 060 = 60 All capacitors are sleeved unless specified. 0100 = Without sleeve 7200 = Tape & Reel 7293 & 7443= Ammo 4250 = 10 cycles, 25°C after Weibull 4251 = 10 cycles, -55 & 85°C after Weibull 4252 = 10 cycles, -55 & 85°C before Weibull Ordering Information – MIL–PRF 39003 M39003 /03 3075 A Capacitor Class Slash Dash Number Surge Option Military Specification Number Specification Sheet Number Failure Rate Level A = C-4250 B = C-4251 C = C-4252 Blank - No surge Orders should be entered by the military specification number, including the dash number and surge option letter (A, B or C). © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 2 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF (120 Hz at 25°C) ESR and Impedance (100 kHz at 25°C) Leakage Current Failure Rate (MIL–39003, CSR13 capacitors only) -55°C to 125°C 0.82 – 1,200 μF at 120 Hz/25°C K Tolerance (10%), M Tolerance (20%) 6 – 60 V Refer to Part Number Electrical Specification Table Refer to Part Number Electrical Specification Table (for reference only) Refer to Part Number Electrical Specification Table (at rated voltage up to +85°C and 2/3 of rated voltage applied at 125°C) Approved failure rate: S (0.001%/k hours) - Exponential, D (0.001%/k hours) - Graded Dimensions – Inches (Millimeters) Case Size A B C D Uninsulated Insulated D ±0.005 L ±0.031 D ±0.010 L ±0.031 B ±0.002 C ±(.13) ±(.79) ±(.25) ±(.79) ±(.05) Maximum 0.125 (3.18) 0.175 (4.45) 0.279 (7.09) 0.341 (8.66) 0.250 (6.35) 0.438 (11.13) 0.650 (16.51) 0.750 (19.05) 0.135 (3.43) 0.185 (4.70) 0.289 (7.34) 0.351 (8.92) 0.286 (7.26) 0.474 (12.04) 0.686 (17.42) 0.786 (19.96) 0.020 (.51) 0.020 (.51) 0.025 (.64) 0.025 (.64) 0.422 (10.72) 0.610 (15.49) 0.822 (20.88) 0.922 (23.42) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 3 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Table 1 – Ratings & Part Number Reference MIL–PRF–39003 (CSR23) Capacitors Rated Voltage Rated Cap Case Size Code KEMET Part Number DC Leakage DF % at 25°C Dash Number Reference Failure Rate Level (%/1,000 Hours) MIL–PRF–39003/3F MIL–PRF–39003/3F Exponential VDC µF 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8.2 10.0 10.0 12.0 12.0 68.0 82.0 100.0 100.0 220.0 270.0 330.0 330.0 390.0 390.0 470.0 470.0 560.0 680.0 680.0 820.0 820.0 1000.0 1000.0 1200.0 5.6 6.8 6.8 8.2 8.2 47.0 47.0 56.0 56.0 68.0 68.0 82.0 82.0 150.0 180.0 220.0 220.0 270.0 270.0 330.0 390.0 390.0 470.0 VDC µF Rated Voltage Rated Cap A A A A A B B B B C C C C C C C C D D D D D D D D A A A A A B B B B B B B B C C C C C C D D D D Case Size Code (See below for part options) T140A825(1)006A(3) T140A106K006A(3) T140A106M006A(3) T140A126K006A(3) T140A126M006A(3) T140B686(1)006A(3) T140B826(1)006A(3) T140B107K006A(3) T140B107M006A(3) T140C227(1)006A(3) T140C277(1)006A(3) T140C337K006A(3) T140C337M006A(3) T140C397K006A(3) T140C397M006A(3) T140C477K006A(3) T140C477M006A(3) T140D567(1)006A(3) T140D687K006A(3) T140D687M006A(3) T140D827K006A(3) T140D827M006A(3) T140D108K006A(3) T140D108M006A(3) T140D128M006A(3) T140A565(1)010A(3) T140A685K010A(3) T140A685M010A(3) T140A825K010A(3) T140A825M010A(3) T140B476K010A(3) T140B476M010A(3) T140B566K010A(3) T140B566M010A(3) T140B686K010A(3) T140B686M010A(3) T140B826K010A(3) T140B826M010A(3) T140C157(1)010A(3) T140C187(1)010A(3) T140C227K010A(3) T140C227M010A(3) T140C277K010A(3) T140C277M010A(3) T140D337(1)010A(3) T140D397K010A(3) T140D397M010A(3) T140D477K010A(3) 120 Hz µA at 25°C Max/5 Minutes Maximum 0.9 6 0.9 6 0.9 6 1.0 6 1.0 6 3.0 6 3.0 6 6.0 6 6.0 6 10.0 8 10.0 8 10.0 8 10.0 8 10.0 10 10.0 10 10.0 10 10.0 10 20.0 10 20.0 10 20.0 10 20.0 10 20.0 10 20.0 10 20.0 10 20.0 10 1.0 4 1.0 6 1.0 6 1.2 6 1.2 6 4.0 6 4.0 6 5.0 6 5.0 6 6.0 6 6.0 6 7.0 6 7.0 6 8.0 8 8.0 8 12.0 8 12.0 8 13.0 8 13.0 8 16.0 8 16.0 10 16.0 10 16.0 10 (See below for part options) 120 Hz µA at 25°C Max/5 Minutes Maximum KEMET Part Number DC Leakage DF % at 25°C Graded KEMET Equivalent Military M (1.0) P (0.1) R (0.01) S (0.001) G (1) B (0.1) C (0.01) D (0.001) Part Number 0101 0102 0103 0201 0202 0203 0301 0302 0303 0401 0402 0403 5001 5002 5003 2001 2002 2003 3001 3002 3003 4001 4002 4003 T242A106K006(2)S T242A106M006(2)S T242A126K006(2)S 0104 0105 0204 0205 0304 0305 0404 0405 5004 5005 2004 2005 3004 3005 4004 4005 T242B107K006(2)S T242B107M006(2)S 0106 0107 0108 0206 0207 0208 0306 0307 0308 0406 0407 0408 5006 5007 5008 2006 2007 2008 3006 3007 3008 4006 4007 4008 T242C337K006(2)S T242C337M006(2)S T242C397K006(2)S 0109 0110 0209 0210 0309 0310 0409 0410 5009 5010 2009 2010 3009 3010 4009 4010 T242C477K006(2)S T242C477M006(2)S 0111 0112 0113 0211 0212 0213 0311 0312 0313 0411 0412 0413 5011 5012 5013 2011 2012 2013 3011 3012 3013 4011 4012 4013 T242D687K006(2)S T242D687M006(2)S T242D827K006(2)S 0114 0115 0214 0215 0314 0315 0414 0415 5014 5015 2014 2015 3014 3015 4014 4015 T242D108K006(2)S T242D108M006(2)S 0116 0117 0118 0216 0217 0218 0316 0317 0318 0416 0417 0418 5016 5017 5018 2016 2017 2018 3016 3017 3018 4016 4017 4018 T242A685K010(2)S T242A685M010(2)S T242A825K010(2)S 0119 0120 0121 0219 0220 0221 0319 0320 0321 0419 0420 0421 5019 5020 5021 2019 2020 2021 3019 3020 3021 4019 4020 4021 T242B476K010(2)S T242B476M010(2)S T242B566K010(2)S 0122 0123 0124 0222 0223 0224 0322 0323 0324 0422 0423 0424 5022 5023 5024 2022 2023 2024 3022 3023 3024 4022 4023 4024 T242B686K010(2)S T242B686M010(2)S T242B826K010(2)S 0125 0126 0127 0225 0226 0227 0325 0326 0327 0425 0426 0427 5025 5026 5027 2025 2026 2027 3025 3026 3027 4025 4026 4027 T242C227K010(2)S T242C227M010(2)S T242C277K010(2)S 0128 0228 0328 0428 5028 2028 3028 4028 T242D397K010(2)S 0129 0229 0329 0429 5029 2029 3029 4029 T242D477K010(2)S M (1.0) P (0.1) R (0.01) S (0.001) G (1) B (0.1) C (0.01) D (0.001) Part Number MIL–PRF–39003 (CSR23) Capacitors (1) To complete KEMET part number, insert M for ±20% or K for ± 10%. Designates capacitance tolerance. (2) To complete KEMET part number (T242), insert failure rate code from Ordering Information table. (3) To complete KEMET T140 Part Number, insert Lead Material designator: S – Standard or T – 100% Matte Tin. Designates termination finish. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 4 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Table 1 – Ratings & Part Number Reference cont'd MIL–PRF–39003 (CSR23) Capacitors Rated Voltage Rated Cap Case Size Code KEMET Part Number DC Leakage DF % at 25°C Dash Number Reference Failure Rate Level (%/1,000 Hours) MIL–PRF–39003/3F MIL–PRF–39003/3F Exponential VDC µF 10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 470.0 560.0 560.0 3.9 4.7 4.7 5.6 5.6 27.0 33.0 33.0 39.0 39.0 82.0 100.0 120.0 150.0 150.0 180.0 180.0 220.0 220.0 270.0 270.0 330.0 330.0 2.7 2.7 3.3 3.3 3.9 3.9 18.0 18.0 22.0 22.0 27.0 27.0 56.0 56.0 68.0 68.0 82.0 82.0 100.0 100.0 120.0 120.0 VDC µF Rated Voltage Rated Cap D D D A A A A A B B B B B C C C C C C C D D D D D D A A A A A A B B B B B B C C C C C C C C C C Case Size Code (See below for part options) T140D477M010A(3) T140D567K010A(3) T140D567M010A(3) T140A395(1)015A(3) T140A475K015A(3) T140A475M015A(3) T140A565K015A(3) T140A565M015A(3) T140B276(1)015A(3) T140B336K015A(3) T140B336M015A(3) T140B396K015A(3) T140B396M015A(3) T140C826(1)015A(3) T140C107(1)015A(3) T140C127(1)015A(3) T140C157K015A(3) T140C157M015A(3) T140C187K015A(3) T140C187M015A(3) T140D227K015A(3) T140D227M015A(3) T140D277K015A(3) T140D277M015A(3) T140D337K015A(3) T140D337M015A(3) T140A275K020A(3) T140A275M020A(3) T140A335K020A(3) T140A335M020A(3) T140A395K020A(3) T140A395M020A(3) T140B186K020A(3) T140B186M020A(3) T140B226K020A(3) T140B226M020A(3) T140B276K020A(3) T140B276M020A(3) T140C566K020A(3) T140C566M020A(3) T140C686K020A(3) T140C686M020A(3) T140C826K020A(3) T140C826M020A(3) T140C107K020A(3) T140C107M020A(3) T140C127K020A(3) T140C127M020A(3) 120 Hz µA at 25°C Max/5 Minutes Maximum 16.0 10 20.0 10 20.0 10 1 4 1 4 1 4 1.3 4 1.3 4 3 6 5 6 5 6 5.3 6 5.3 6 8 6 10 6 10 6 15 8 15 8 15 8 15 8 20 8 20 8 20 8 20 8 20 8 20 8 0.8 4 0.8 4 1.0 4 1.0 4 1.2 4 1.2 4 3.0 6 3.0 6 3.0 6 3.0 6 4.0 6 4.0 6 7.0 6 7.0 6 8.0 6 8.0 6 10.0 6 10.0 6 12.0 6 12.0 6 12.0 6 12.0 6 (See below for part options) 120 Hz µA at 25°C Max/5 Minutes Maximum KEMET Part Number DC Leakage DF % at 25°C Graded KEMET Equivalent Military M (1.0) 0130 0131 P (0.1) 0230 0231 R (0.01) 0330 0331 S (0.001) 0430 0431 G (1) 5030 5031 B (0.1) 2030 2031 C (0.01) 3030 3031 D (0.001) 4030 4031 T242D477M010(2)S T242D567K010(2)S 0132 0133 0134 0232 0233 0234 0332 0333 0334 0432 0433 0434 5032 5033 5034 2032 2033 2034 3032 3033 3034 4032 4033 4034 T242A475K015(2)S T242A475M015(2)S T242A565K015(2)S 0135 0136 0137 0235 0236 0237 0335 0336 0337 0435 0436 0437 5035 5036 5037 2035 2036 2037 3035 3036 3037 4035 4036 4037 T242B336K015(2)S T242B336M015(2)S T242B396K015(2)S 0138 0139 0140 0238 0239 0240 0338 0339 0340 0438 0439 0440 5038 5039 5040 2038 2039 2040 3038 3039 3040 4038 4039 4040 T242C157K015(2)S T242C157M015(2)S T242C187K015(2)S 0141 0142 0143 0241 0242 0243 0341 0342 0343 0441 0442 0443 5041 5042 5043 2041 2042 2043 3041 3042 3043 4041 4042 4043 T242D227K015(2)S T242D227M015(2)S T242D277K015(2)S 0144 0145 0146 0244 0245 0246 0344 0345 0346 0444 0445 0446 5044 5045 5046 2044 2045 2046 3044 3045 3046 4044 4045 4046 T242D337K015(2)S T242D337M015(2)S T242A275K020(2)S 0147 0148 0149 0247 0248 0249 0347 0348 0349 0447 0448 0449 5047 5048 5049 2047 2048 2049 3047 3048 3049 4047 4048 4049 T242A335K020(2)S T242A335M020(2)S T242A395K020(2)S 0150 0250 0350 0450 5050 2050 3050 4050 T242B186K020(2)S 0151 0152 0153 0251 0252 0253 0351 0352 0353 0451 0452 0453 5051 5052 5053 2051 2052 2053 3051 3052 3053 4051 4052 4053 T242B226K020(2)S T242B226M020(2)S T242B276K020(2)S 0154 0254 0354 0454 5054 2054 3054 4054 T242C566K020(2)S 0155 0156 0157 0255 0256 0257 0355 0356 0357 0455 0456 0457 5055 5056 5057 2055 2056 2057 3055 3056 3057 4055 4056 4057 T242C686K020(2)S T242C686M020(2)S T242C826K020(2)S 0158 0159 0160 0258 0259 0260 0358 0359 0360 0458 0459 0460 5058 5059 5060 2058 2059 2060 3058 3059 3060 4058 4059 4060 T242C107K020(2)S T242C107M020(2)S T242C127K020(2)S M (1.0) P (0.1) R (0.01) S (0.001) G (1) B (0.1) C (0.01) D (0.001) Part Number Part Number MIL–PRF–39003 (CSR23) Capacitors (1) To complete KEMET part number, insert M for ±20% or K for ± 10%. Designates capacitance tolerance. (2) To complete KEMET part number (T242), insert failure rate code from Ordering Information table. (3) To complete KEMET T140 Part Number, insert Lead Material designator: S – Standard or T – 100% Matte Tin. Designates termination finish. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 5 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Table 1 – Ratings & Part Number Reference cont'd MIL–PRF–39003 (CSR23) Capacitors Rated Voltage Rated Cap Case Size Code KEMET Part Number DC Leakage DF % at 25°C Dash Number Reference Failure Rate Level (%/1,000 Hours) MIL–PRF–39003/3F MIL–PRF–39003/3F Exponential VDC µF 20 20 20 20 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 150.0 150.0 180.0 180.0 1.2 1.5 1.8 2.2 2.7 12.0 15.0 18.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 1.2 1.5 1.8 1.8 8.2 8.2 10.0 10.0 27.0 33.0 33.0 39.0 39.0 47.0 47.0 56.0 56.0 68.0 68.0 82.0 100.0 1.2 1.2 1.5 1.5 5.6 5.6 6.8 6.8 VDC µF Rated Voltage Rated Cap D D D D A A A A A B B B C C C C C D D A A A A B B B B C C C C C C C D D D D D D A A A A B B B B Case Size Code (See below for part options) T140D157K020A(3) T140D157M020A(3) T140D187K020A(3) T140D187M020A(3) T140A125(1)030A(3) T140A155(1)030A(3) T140A185(1)030A(3) T140A225(1)030A(3) T140A275(1)030A(3) T140B126(1)030A(3) T140B156(1)030A(3) T140B186(1)030A(3) T140C336(1)030A(3) T140C396(1)030A(3) T140C476(1)030A(3) T140C566(1)030A(3) T140C686(1)030A(3) T140D826(1)030A(3) T140D107(1)030A(3) T140A125(1)035A(3) T140A155(1)035A(3) T140A185K035A(3) T140A185M035A(3) T140B825K035A(3) T140B825M035A(3) T140B106K035A(3) T140B106M035A(3) T140C276(1)035A(3) T140C336K035A(3) T140C336M035A(3) T140C396K035A(3) T140C396M035A(3) T140C476K035A(3) T140C476M035A(3) T140D566K035A(3) T140D566M035A(3) T140D686K035A(3) T140D686M035A(3) T140D826(1)035A(3) T140D107(1)035A(3) T140A125K050A(3) T140A125M050A(3) T140A155K050A(3) T140A155M050A(3) T140B565K050A(3) T140B565M050A(3) T140B685K050A(3) T140B685M050A(3) 120 Hz µA at 25°C Max/5 Minutes Maximum 15.0 8 15.0 8 15.0 8 15.0 8 1.0 4 1.0 4 1.0 4 1.0 4 1.0 4 3.0 4 3.0 4 3.0 4 6.0 6 6.0 6 7.0 6 7.0 6 7.0 6 10.0 6 10.0 8 0.6 4 0.8 4 1.0 4 1.0 4 3.0 4 3.0 4 3.0 4 3.0 4 7.0 6 8.0 6 8.0 6 10.0 6 10.0 6 10.0 6 10.0 6 12.0 6 12.0 6 12.0 6 12.0 6 20.0 8 20.0 8 0.6 4 0.6 4 0.8 4 0.8 4 2.5 4 2.5 4 2.5 4 2.5 4 (See below for part options) 120 Hz µA at 25°C Max/5 Minutes Maximum KEMET Part Number DC Leakage DF % at 25°C Graded KEMET Equivalent Military M (1.0) 0161 0162 0163 P (0.1) 0261 0262 0263 R (0.01) 0361 0362 0363 S (0.001) 0461 0462 0463 G (1) 5061 5062 5063 B (0.1) 2061 2062 2063 C (0.01) 3061 3062 3063 D (0.001) 4061 4062 4063 T242D157K020(2)S T242D157M020(2)S T242D187K020(2)S 0164 0264 0364 0464 5064 2064 3064 4064 T242A185K035(2)S 0165 0265 0365 0465 5065 2065 3065 4065 T242B825K035(2)S 0166 0167 0266 0267 0366 0367 0466 0467 5066 5067 2066 2067 3066 3067 4066 4067 T242B106K035(2)S T242B106M035(2)S 0168 0169 0170 0268 0269 0270 0368 0369 0370 0468 0469 0470 5068 5069 5070 2068 2069 2070 3068 3069 3070 4068 4069 4070 T242C336K035(2)S T242C336M035(2)S T242C396K035(2)S 0171 0172 0173 0271 0272 0273 0371 0372 0373 0471 0472 0473 5071 5072 5073 2071 2072 2073 3071 3072 3073 4071 4072 4073 T242C476K035(2)S T242C476M035(2)S T242D566K035(2)S 0174 0175 0274 0275 0374 0375 0474 0475 5074 5075 2074 2075 3074 3075 4074 4075 T242D686K035(2)S T242D686M035(2)S 0176 0276 0376 0476 5076 2076 3076 4076 T242A125K050(2)S 0177 0178 0179 0277 0278 0279 0377 0378 0379 0477 0478 0479 5077 5078 5079 2077 2078 2079 3077 3078 3079 4077 4078 4079 T242A155K050(2)S T242A155M050(2)S T242B565K050(2)S 0180 0181 0280 0281 0380 0381 0480 0481 5080 5081 2080 2081 3080 3081 4080 4081 T242B685K050(2)S T242B685M050(2)S M (1.0) P (0.1) R (0.01) S (0.001) G (1) B (0.1) C (0.01) D (0.001) Part Number Part Number MIL–PRF–39003 (CSR23) Capacitors (1) To complete KEMET part number, insert M for ±20% or K for ± 10%. Designates capacitance tolerance. (2) To complete KEMET part number (T242), insert failure rate code from Ordering Information table. (3) To complete KEMET T140 Part Number, insert Lead Material designator: S – Standard or T – 100% Matte Tin. Designates termination finish. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 6 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Table 1 – Ratings & Part Number Reference cont'd MIL–PRF–39003 (CSR23) Capacitors Rated Voltage Rated Cap Case Size Code KEMET Part Number C C C C D D D D D A A B B C C C D D (See below for part options) T140C226K050A(3) T140C226M050A(3) T140C276K050A(3) T140C276M050A(3) T140D336K050A(3) T140D336M050A(3) T140D396K050A(3) T140D396M050A(3) T140D476M050A(3) T140A824(1)060A(3) T140A105(1)060A(3) T140B475(1)060A(3) T140B565(1)060A(3) T140C156(1)060A(3) T140C186(1)060A(3) T140C226(1)060A(3) T140D276(1)060A(3) T140D336(1)060A(3) (See below for part options) DC Leakage DF % at 25°C Dash Number Reference Failure Rate Level (%/1,000 Hours) MIL–PRF–39003/3F MIL–PRF–39003/3F Exponential VDC µF 50 50 50 50 50 50 50 50 50 60 60 60 60 60 60 60 60 60 22.0 22.0 27.0 27.0 33.0 33.0 39.0 39.0 47.0 0.82 1.0 4.7 5.6 15.0 18.0 22.0 27.0 33.0 VDC µF Rated Voltage Rated Cap Case Size Code KEMET Part Number 120 Hz µA at 25°C Max/5 Minutes Maximum 7.0 6 7.0 6 8.0 6 8.0 6 10.0 6 10.0 6 10.0 6 10.0 6 10.0 6 0.5 4 0.5 4 3.0 4 3.0 4 5.0 6 6.0 6 7.0 6 10.0 6 10.0 6 120 Hz µA at 25°C Max/5 Minutes Maximum DC Leakage DF % at 25°C Graded KEMET Equivalent Military M (1.0) 0182 0183 0184 P (0.1) 0282 0283 0284 R (0.01) 0382 0383 0384 S (0.001) 0482 0483 0484 G (1) 5082 5083 5084 B (0.1) 2082 2083 2084 C (0.01) 3082 3083 3084 D (0.001) 4082 4083 4084 T242C226K050(2)S T242C226M050(2)S T242C276K050(2)S 0185 0186 0187 0285 0286 0287 0385 0386 0387 0485 0486 0487 5085 5086 5087 2085 2086 2087 * * * * * * T242D336K050(2)S T242D336M050(2)S T242D396K050(2)S M (1.0) P (0.1) R (0.01) S (0.001) G (1) B (0.1) C (0.01) D (0.001) Part Number Part Number MIL–PRF–39003 (CSR23) Capacitors (1) To complete KEMET part number, insert M for ±20% or K for ± 10%. Designates capacitance tolerance. (2) To complete KEMET part number (T242), insert failure rate code from Ordering Information table. (3) To complete KEMET T140 Part Number, insert Lead Material designator: S – Standard or T – 100% Matte Tin. Designates termination finish. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 7 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Ripple Current/Ripple Voltage Permissible AC ripple voltage is related to the ESR of the capacitor and the power dissipation capabilities of a particular case size. Thermal capacities for the various case sizes have been determined empirically and are listed below. Temperature Compensation Multipliers for Maximum Power Dissipation T ≤ 25°C 1.00 T ≤ 85°C 0.90 T ≤ 125°C 0.40 T= Environmental Temperature Permissible AC ripple current can be determined by the following: I(max) = Z √P max/R Case Size Maximum Power Dissipation (P max) T2XX A 0.09 0.070 B 0.100 0.090 C 0.125 – D 0.180 – Maximum Power Dissipation: 25°C Ambient P max = maximum watts R = ESR at specified frequency (ohms) I = rms ripple current (amperes) Z = capacitor impedance in ohms at the specified frequency Optimum Solder Wave Profile © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 8 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Reverse Voltage Although these are polar capacitors, some degree of transient voltage reversal is permissible, as seen below. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Pecentage of Rated Voltage +25°C +85°C +125°C 15 5 1 Mounting All encased capacitors will pass the Resistance to Soldering Heat Test of MIL–STD–202, Method 210, Condition C. This test simulates wave solder of topside board mount product. This demonstration of resistance to solder heat is in accordance with what is believed to be the industry standard. More severe treatment must be considered reflective of an improper soldering process. The above figure is a recommended solder wave profile for both axial and radial leaded solid tantalum capacitors. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 9 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Capacitor Marking T140 +K 10% 5R6 µF 10 V 1330 Polarity, KEMET's Identification & CAP Tol. Nominal CAP ("R" indicates decimal) Voltage Date Code Date Code * 1 digit = Last number of Year 2 = 2012 3 = 2013 4 = 2014 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year st T242 Case A 39003 03 - K 6003J 330 + AAAA Case B Military Specification Number Specification Sheet Number & K = KEMET Military Dash Number & J = Jan Date Code & Polarity Lot Symbol M39003 03 6003J 31433 330 AAAA + Military Specification Number Specification Sheet Number Military Dash Number & J = Jan Source Code Date Code, Polarity & Lot Symbol Case C & D M39003 03 - 8020J 330µF + 31433 330 AAAA K Military Specification Number Specification Sheet Number, Military Dash Number and J= Jan Capacitance Value & Polarity Source Code Date Code, Lot Symbol & K = KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 10 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Storage Tantalum hermetically sealed capacitors should be stored in normal working environments. While the capacitors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability capacitors stock should be used promptly, preferably within three years of receipt. Tape & Reel Packaging Information KEMET offers standard reeling of Solid Tantalum Capacitors for automatic insertion or lead forming machines per EIA Specification RS-296E. Table 2 – Packaging Quantity Case Size Standard Bulk Quantity Standard Reel Quantity Reel C-Spec Ammo Pack Quantity Ammo Pack C-Spec A 150/Box 3,500 C-7200 1,500 C-7293 B 75/Box 2,500 C-7200 1,000 Class I C 20/Tray 500 C-7200 250 C-7442 D 20/Tray 400 C-7200 250 Class II C-7443 Class III © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 11 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Figure 2 Figure 3 12" (30.48cm) * 0.059" to 0.315" Greater Than Component Length White (+) (Anode) Blue ( –) (Cathode) 0.047" Maximum (1.20) Hub 0.655" ±0.010 Hole (15.9 ±0.25) * 3 1 /4 " (82.6) 1/ " 8 (3.18) See Table 3 "B" See Table 3 "A" 0.250" Nominal (6.35) Table 3 – Tape Dimensions Component Body Diameter Component Pitch "A" Inside Tape Spacing "B" ±1.5 mm (0.059") 0.020" or (±0.5 mm) I II III 0" (0 mm) to 0.197" (5 mm) 0.200" or (5 mm) 2.062" 2.500" 2.874" 0.197" (5.01 mm) to 0.394" (10 mm) 0.400 or (10 mm) (52.4 mm) (63.5 mm) (73 mm) CapacitorsarereeledsothatpositiveleadsareorientedasshowninFigure3.Kraftpaper(50lb.testminimum)isinsertedbetween thelayersofcapacitorswoundonreelsforcomponentpitch≤0.200"sizesandcorrugatedpaper(70lb.testminimum),singlefacedis insertedforcomponentpitch≥0.400"sizes.Capacitorleadlengthmayextendonlyamaximumof.031"(0.8mm)beyondthetape’s edges.Capacitorsarecenteredinarowbetweenthetwotapesandwilldeviateonly±0.031"(0.79mm)fromtherowcenter.Figures 1and2showtheKEMETstandardchipboardtapereel.Aminimumof36"(91.5cm)leadertapeisprovidedateachendofthereeled capacitors. Universal splicing clips are used to connect the tape. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 12 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) KEMET Corporation World Headquarters Europe Asia Southern Europe SassoMarconi,Italy Tel:39-051-939111 Northeast Asia Hong Kong Tel:852-2305-1168 MailingAddress: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel:389-2-55-14-623 Shenzhen, China Tel:86-755-2518-1306 www.kemet.com Tel:864-963-6300 Fax:864-963-6521 Central Europe Landsberg,Germany Tel:49-8191-3350800 Corporate Offices FortLauderdale,FL Tel:954-766-2800 Kamen,Germany Tel:49-2307-438110 North America Northern Europe Harlow, United Kingdom Tel:44-1279-460122 Taipei, Taiwan Tel:886-2-27528585 Espoo,Finland Tel:358-9-5406-5000 Southeast Asia Singapore Tel:65-6701-8033 2835KEMETWay Simpsonville, SC 29681 Southeast LakeMary,FL Tel:407-855-8886 Northeast Wilmington, MA Tel:978-658-1663 Central Novi, MI Tel:248-306-9353 Beijing, China Tel:86-10-5877-1075 Shanghai, China Tel:86-21-6447-0707 Seoul, South Korea Tel:82-2-6294-0550 Penang,Malaysia Tel:60-4-6430200 Bangalore, India Tel:91-806-53-76817 West Milpitas, CA Tel:408-433-9950 Mexico Guadalajara, Jalisco Tel:52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 13 Tantalum Through-Hole Capacitors – Hermetically Sealed T140 Series Axial MIL–PRF–39003 Polar Type and T242 (CSR23 Style) Disclaimer Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced. AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained. AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponentfailuresmaystill occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective circuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjuryorpropertydamage. Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatothermeasuresmaynot berequired. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2034_T140_AXIAL_T242 • 3/6/2015 14