Tantalum Through-Hole Capacitors – Hermetically Sealed M55 Module Polymer Hermetic Seal Overview KEMET's M550 and M551 Modular Series are manufactured by placing T550 or T551 Polymer Hermetic Sealed Capacitors (PHS) in parallel. The T550 and T551 Series are manufactured utilizing KEMET’s exclusive F-Tech process and are 100% tested per KEMET’s patented Simulated Breakdown Screening process. This configuration provides high and stable capacitance (up to 8,200 µF), extremely low ESR (down to 15 mΩ) and extremely low and stable leakage current, all in a mechanically robust package. The M55 Modules are available in two temperature offerings: 105°C (M550 Series) and 125°C (M551 Series). With reduced ESR and enhanced capacitance retention at higher frequencies and low temperatures, KEMET modules provide the highest total capacitance and the lowest total cost of ownership for high power applications. Benefits • Extremely low and stable ESR (as low as 15 mΩ) • High frequency capacitance retention • Low temperature capacitance stability • High ripple current capability (17,500 mArms) • High in rush current capability • Excellent power dissipation capability • Stackable packaging • Mechanically robust assembly and epoxy housing • Operates at up to 80% rated voltage • Customized solutions available • RoHS compliant terminations available Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Applications Designed for mission critical applications requiring high power, filtering, hold-up and current pulse generation. One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2074_M55_Module • 11/24/2015 1 Tantalum Through-Hole Capacitors – Hermetically Sealed M55 Module Polymer Hermetic Seal Ordering Information M Capacitor Class M= Module 550 B 108 M 060 A A Series Case Size Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Product Level Termination Finish B First two digits represent significant figures. Third digit specifies number of zeros. K = ±10% M = ±20% 006 = 6 008 = 8 010 = 10 015 = 15 025 = 25 030 = 30 040 = 40 050 = 50 060 = 60 075 = 75 100 = 100 A = N/A B* = DLA 13030 standard reliability T* = DLA 13030 high reliability A = 100% silver (Ag) T = 100% tin (Sn) plated H = Tin/lead (SnPb) solder coated (5% Pb minimum) S = Solder coated (60% Sn, 40% Pb) G = 100% gold (Au) 550= Capacitor Series (PHS 105°C) 551= Capacitor Series (PHS 125°C) * Only available on DLA discrete part numbers. Refer to part number table for details. Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF (120 Hz at 25°C) ESR (100 kHz at 25°C) Leakage Current -55°C to 105°C/125°C * 250 μF to 8,200 μF at 120 Hz/25°C K Tolerance (10%), M Tolerance (20%) 6 – 100 V Refer to Part Number Electrical Specification Table Refer to Part Number Electrical Specification Table ≤ 0.0075 CV (µA) at rated voltage after 5 minutes * Refer to the part number specification table Qualification Test Performed Method Reference Test Conditions Reliability and Environmental Tests AC Ripple Life at 85˚C, 0.67 Vr MIL–PRF–39006 85˚C, 40 kHz ripple current, 2,000 hours Thermal Shock MIL–PRF–39006 Condition A, -55°C to +105°C 5 cycles Temperature Stability MIL–PRF–39006 Extreme temperature exposure at a succession of continuous steps at +25°C, -55°C, +25°C, +85°C, +105, +25°C Physical, Mechanical and Process Tests Mechanical Shock Vibration High Frequency KEMET Custom Test MIL–PRF–39006 Condition I Method 204, Test condition D, 20 g peak © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2074_M55_Module • 11/24/2015 2 Tantalum Through-Hole Capacitors – Hermetically Sealed M55 Module Polymer Hermetic Seal Dimensions – Millimeters (Inches) FRONT VIEW RIGHT SIDE VIEW S - F + H2 ød LL W2 L W1 H1 ød Module Frame Size 1 W L ±0.38 (0.015) 52.1 (2.05) H W ±0.38 (0.015) 50.6 (1.99) H ±0.20 (0.008) 11.1 (0.44) Dimensions S (Ref) 12.71 (0.50) LL ±0.1 (0.004) 5.6 (0.22) F (Ref) 0.81 (0.03) H1 ±0.1 (0.004) 4.5 (0.18) W1 ±0.1 (0.004) 3.2 (0.13) H2 ±0.1 (0.004) 8.2 (0.32) W2 ±0.1 (0.004) 4.4 (0.17) Weight d (Ref) 3.2 (0.13) per module (g) 80 Table 1 – Ratings & Part Number Reference Rated Voltage VDC at 85ºC 6 6 8 8 10 10 15 15 25 25 30 30 40 40 40 40 50 50 50 50 60 60 75 100 Rated Capacitance KEMET Module Part Number µF (See below for part options) 8200 8200 6800 6800 5600 5600 3900 3900 1000 1000 680 680 1000 1000 1200 1200 1000 1000 1200 1200 1000 1000 750 250 M550B828(1)006A(3) M551B828(1)006A(3) M550B688(1)008A(3) M551B688(1)008A(3) M550B568(1)010A(3) M551B568(1)010A(3) M550B398(1)015A(3) M551B398(1)015A(3) M550B108(1)025(2)(3)* M551B108(1)025A(3) M550B687(1)030A(3) M551B687(1)030A(3) M550B108(1)040(2)(3)* M551B108(1)040A(3) M550B128(1)040(2)(3)* M551B128(1)040A(3) M550B108(1)050(2)(3)* M551B108(1)050A(3) M550B128(1)050(2)(3)* M551B128(1)050A(3) M550B108(1)060(2)(3)* M551B108(1)060A(3) M550B757(1)075(2)(3)* M550B257(1)100(2)(3)* DC Leakage DF Maximum ESR Ripple Current µA at 25°C Maximum/5 Minutes 369 369 408 408 420 420 439 439 188 188 153 153 300 300 360 360 375 375 450 450 450 450 422 188 % at 25ºC 120 Hz Max 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 mΩ at 25ºC 100 kHz 15 15 15 15 15 15 15 15 30 30 25 25 25 25 20 20 20 20 15 15 25 25 20 30 mA rms at 85ºC/40 kHz 17500 17500 17500 17500 17500 17500 17500 17500 12000 12000 14000 14000 13500 13500 15100 15100 14500 14500 17500 17500 16600 16600 15800 12750 Maximum Operating Temperature ºC 105 125 105 125 105 125 105 125 105 125 105 125 105 125 105 125 105 125 105 125 105 125 105 105 Additional values available please contact your KEMET sales representative (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert B = standard reliability, or T = high reliability. See Ordering Information table for details. (3) To complete KEMET part number, insert T = 100% matte tin (Sn) plated, H = standard solder coated (SnPb 5% Pb minimum), S = 60% tin (Sn) 40% lead (Pb), G = 100% gold (Au), A = 100% silver (Ag). Designates termination finish. * Screened discrete component DLA qualified. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2074_M55_Module • 11/24/2015 3 Tantalum Through-Hole Capacitors – Hermetically Sealed M55 Module Polymer Hermetic Seal % Change in Working DC Voltage with Temperature Recommended Maximum Application Voltage (As % of Rated Voltage) -55°C to 105°C 105°C to 125°C 78% of VR 66% of VR 63% of VR 54% of VR % Working Voltage Recommended Voltage Derating Guidelines 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% % Change in Working DC Voltage with temperature 78% 66% Recommended Maximum Application Voltage -55 25 45 85 Temperature (°C) 54% 105 125 Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage that may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. The maximum power dissipation by case size can be determined using the below left table. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the below right table for temperature compensation requirements. Case Code KEMET MIL–PRF–39006/22/ 25/30/31 Case Size B T2 Maximum Power Dissipation (Pmax) mWatts at 25°C with +60°C Rise 715 Temperature Compensation Multipliers for Maximum Power Dissipation (Pmax) T ≤ 45°C 1.00 45°C < T ≤ 85°C 0.50 T= Environmental Temperature 85°C < T ≤ 125°C 0.10 Using the Pmax of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √Pmax /R E(max) = Z √Pmax /R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2074_M55_Module • 11/24/2015 4 Tantalum Through-Hole Capacitors – Hermetically Sealed M55 Module Polymer Hermetic Seal Reverse Voltage Solid tantalum polymer capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. A small reverse voltage is permissible for time periods per the table at right. KEMET can offer lower capacitance in this voltage with higher reverse voltage capability. In addition, we continue to improve our capability for this characteristic. Temperature Permissible Reverse Voltage 25°C 70ºC 1 V for 8 hours Maximum 1 V for 2 hours Maximum Mounting The M550 and M551 Modular Series are suitable for stacking to the board. The use of a heat sink is recommended. These products are not suitable for reflow soldering. For manual-soldering process with soldering iron, the maximum recommended temperature is 350°C for no more than 3 seconds. Care should be taken to avoid contact of the soldering iron to the epoxy housing. The iron should be used to heat the solder pad, applying solder between the pad and the terminal of the module, until reflow occurs. Construction Mounting Eyelet (Brass) Molded Plastic Case (Epoxy Potting Not Shown) Wire Lead (+) (100% Sn / SnPb) Detailed Cross Section Solder Anode Tube Hermetic Seal System (Glass Seal and Ring) T550/T551 Capacitors (Qty = 10, Parallel) Module Frame (Cu) Solder Aluminum Can Tantalum Wire Carbon (Third Layer) Terminals (See Ordering Information for Finish Options) Molded Plastic Case (Bottom Panel) Ta2O5 Dielectric (First Layer) Silver Paint (Fourth Layer) Polymer (Second Layer) Wire Lead (-) (100% Sn / SnPb) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Tantalum Solder T2074_M55_Module • 11/24/2015 5 Tantalum Through-Hole Capacitors – Hermetically Sealed M55 Module Polymer Hermetic Seal Capacitor Marking Polarity Indicators (-)(+) KEMET ID Series Capacitance Code, Tolerance Code Rated Voltage (VDC) 4 Digit Date Code, Batch Code Storage Polymer Hermetic Seal Modules should be stored in normal working environments. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 90% RH. For optimal solderability, module stock should be used promptly, preferably within three years of receipt. Packaging Modules shall be packaged in carton boxes. Packaging methods and materials used shall prevent degradation of physical and mechanical characteristics. MSL 1 Series Carton Box Qty M55 10 max © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2074_M55_Module • 11/24/2015 6 Tantalum Through-Hole Capacitors – Hermetically Sealed M55 Module Polymer Hermetic Seal KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Wyboston, United Kingdom Tel: 44-1480-273082 Taipei, Taiwan Tel: 886-2-27528585 Espoo, Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Northeast Wilmington, MA Tel: 978-658-1663 Southeast Lake Mary, FL Tel: 407-855-8886 Central Novi, MI Tel: 248-994-1030 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Irving, TX Tel: 972-915-6041 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2074_M55_Module • 11/24/2015 7 Tantalum Through-Hole Capacitors – Hermetically Sealed M55 Module Polymer Hermetic Seal Disclaimer Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2074_M55_Module • 11/24/2015 8