PEH200 Series, +85°C

Screw Terminal Aluminum Electrolytic Capacitors
PEH200 Series, +85°C
Overview
Applications
KEMET's PEH200 Series of capacitors has a polarized allwelded design, heavy duty screw terminals, extended cathode
construction, safety vent, and plastic insulation. The sealing
system is designed for electrolyte leakage-free operation and
a very low gas-diffusion rate of electrolyte. Mechanical contact
between the winding and aluminum case allows excellent heat
transfer from the winding hot-spot to the ambient, which means
cooler operation and very high current ratings.
Typical applications for KEMET's PEH200 capacitor include
uninterruptible power supplies (UPS), ground power units
(GPU), welding equipment, and drives where high current
ratings and compact size are important.
Benefits
•
•
•
•
•
High CV value
Long life, up to 29,000 hours at +85ºC (VR, IR applied)
Low ESR and ESL
Compact size
Optimized designs available upon request
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
PEH200
H
A
515
0
M
U2
Series
Voltage (VDC)
Size Code
Capacitance Code (µF)
Version
Capacitance
Tolerance
Stud Option
See Dimension table
The second 2 digits indicate
the 2 most significant digits
of the capacitance value.
The first digit indicates the
total number digits.
0 = Standard
Screw Terminal
Aluminum
Electrolytic
H = 25
K = 40
M = 63
P = 100
S = 250
U = 350
X = 385
V = 400
O = 420
Y = 450
Z = 500
Q = -10 + 30%
M = ±20%
U2 = Plain Can
B2 = Threaded
mounting stud
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4034_PEH200 • 8/25/2015
1
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
Performance Characteristics
Item
Performance Characteristics
Capacitance Range
100 – 330,000 µF
Rated Voltage
25 – 500 VDC
Operating Temperature
-40 to +85°C
Capacitance Tolerance
±20% at 100 Hz / +20°C
Rated Voltage and Ripple Current at
+85°C (hours)
10,000
12,000
15,000
19,000
29,000
D (mm)
35
50
65
75
90
Operational Lifetime
Shelf Life
60,000
2,000 hours at +85°C or 4 years at +40°C 0 VDC
I = 0.003 CV + 4000 (µA) (VR < 500 VDC)
Leakage Current
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.
Procedure
Requirements
D ≤ 50 mm
0.75 mm displacement amplitude or 10
g maximum acceleration.
Vibration applied for three 2-hour
sessions at 10 – 500 Hz (Capacitor
clamped by body).
D > 50 mm
0.75 mm displacement amplitude or 10
g maximum acceleration.
Vibration applied for three 2-hour
sessions at 10 – 55 Hz (Capacitor
clamped by body).
Vibration Test Specifications
Standards
Rated Voltage at +85°C (hours)
No leakage of electrolyte or other
visible damage. Deviations in
capacitance and tanδ from initial
measurements must not exceed: ∆
C/C < 5%
IEC 60384–4 long life grade 40/85/56
Test Method & Performance
Endurance Life Test
Conditions
Performance
Temperature
+85°C
Test Duration
2,000 hours
Ripple Current
Voltage
Performance
Capacitance Change
Equivalent Series Resistance
Leakage Current
Maximum ripple current specified in table
The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor
The following specifications will be satisfied when the capacitor is tested at +20°C:
≤ 100 V
Within 15% of the initial value
> 100 V
Within 10% of the initial value
Does not exceed 200% of the initial value
Does not exceed leakage current limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4034_PEH200 • 8/25/2015
2
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
Dimensions – Millimeters
SIDE VIEW
L3
L2
L1
OVAL TERMINAL
END VIEW
ROUND TERMINAL
END VIEW
Safety Vent
Safety Vent
(D = 36.6)
(D > 36.6)
a
D
DT
+
Polarity
Mark
b
Optional Mounting
Stud (M x S)
Reference Size
(mm)
Size Code
35 x 51
35 x 60
35 x 75
35 x 95
50 x 49
50 x 75
50 x 95
50 x 105
50 x 115
65 x 105
65 x 115
65 x 130
65 x 140
75 x 78
75 x 98
75 x 105
75 x 115
75 x 145
75 x 220
90 x 78
90 x 98
90 x 145
90 x 220
A
B
C
D
G
H
J
K
I
O
Q
S
R
L
P
T
U
V
X
M
N
Y
Z
D
L1
+
Dimensions in mm
L2
L3
DT
Polarity
Mark
a
Mounting Stud
(M x S)
±1.0
±1.0
±1.0
±1.0
±0.5
36.6
51.5
54.5
58.9
13.0
36.6
59.5
62.5
66.9
13.0
36.6
73.5
76.5
80.9
13.0
36.6
94.5
97.5
101.9
13.0
51.6
48.5
51.5
56.4
22.0
51.6
74.5
77.5
82.4
22.0
51.6
95.5
98.5
103.4
22.0
51.6
103.5
106.5
111.4
22.0
51.6
115.5
118.5
123.4
22.0
66.6
106.0
109.2
113.0
28.5
66.6
118.0
121.2
125.0
28.5
66.6
129.0
132.2
136.0
28.5
66.6
141.0
144.2
148.0
28.5
76.6
77.0
80.2
84.0
32.0
76.6
98.0
101.2
105.0
32.0
76.6
106.0
109.2
113.0
32.0
76.6
118.0
121.2
125.0
32.0
76.6
146.0
149.2
153.0
32.0
76.6
221.0
224.2
228.0
32.0
91.6
76.5
79.7
83.4
32.0
91.6
97.5
100.7
104.4
32.0
91.6
145.5
148.7
152.4
32.0
91.6
220.0
224.2
226.9
32.0
Note: Dimensions include sleeving. Additional case sizes available on request
Nominal
M8 x 12
M8 x 12
M8 x 12
M8 x 12
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
M12 x 16
Approximate
Weight
Grams
70
85
105
130
150
180
240
265
300
415
460
520
650
430
530
585
640
800
1400
750
950
1400
1500
Termination Table
Reference
Diameter
Thread
Termination
Style
35
50
65
75
90
M5
M5
M5
M5
M5
Round
Oval
Oval
Oval
Oval
Dimensions in mm
DT
8
15
15
15
15
b
13
13
13
13
Note: M6 and other termination options available on request
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4034_PEH200 • 8/25/2015
3
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
Shelf Life
The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however the leakage
current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three years at 40°C. See
sectional specification under each product series for specific data.
Re-age (Reforming) Procedure
Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen to a steady
value below the specified limit. During re-aging a maximum charging current of twice the specified leakage current or 5 mA (whichever
is greater) is suggested.
Reliability
The reliability of a component can be defined as the probability that it will perform satisfactorily under a given set of conditions for a
given length of time.
In practice, it is impossible to predict with absolute certainty how any individual component will perform; thus, we must utilize probability
theory. It is also necessary to clearly define the level of stress involved (e.g. operating voltage, ripple current, temperature and time).
Finally, the meaning of satisfactory performance must be defined by specifying a set of conditions which determine the end of life of the
component.
Reliability as a function of time, R(t), is normally expressed as: R(t)=e-λt
where R(t) is the probability that the component will perform satisfactorily for time t, and λ is the failure rate.
Failure Rate
The failure rate is the number of components failing per unit time. The failure rate of most electronic components follows the
characteristic pattern:
• Early failures are removed during the manufacturing process.
• The operational life is characterized by a constant failure rate.
• The wear out period is characterized by a rapidly increasing failure rate.
The failures in time (FIT) are given with a 60% confidence level for the various type codes. By convention, FIT is expressed as 1 x 10-9
failures per hour. Failure rate is also expressed as a percentage of failures per 1,000 hours.
e.g., 100 FIT = 1 x 10-7 failures per hour = 0.01%/1,000 hours
End of Life Definition
Catastrophic Failure: short circuit, open circuit or safety vent operation
Parametric Failure:
• Change in capacitance > ±10%
• Leakage current > specified limit
• ESR > 2 x initial ESR value
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4034_PEH200 • 8/25/2015
4
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
MTBF
The mean time between failures (MTBF) is simply the inverse of the failure rate.
MTBF= 1/λ
Failure Rate
early failures
wear out
operational life
Time
The failure rate is derived from our periodic test results. The failure rate (λR) is, therefore, only given at test temperature for life tests. An
estimation is also given at 60°C.
The expected failure rate for this capacitor range is based on our periodic test results for capacitors with structural similarity.
Failure Rate per Hour
T a
85°C 1,000 FIT
60°C 100 FIT
Failure rate per hour includes both catastrophic and parametric failures.
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects
of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like China, legislation
has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this
catalog are produced to help our customers’ obligations to guarantee their products and fulfill these legislative requirements. The only
material of concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing
less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and makes any
necessary changes in its products, whenever needed.
Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings.
To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible
capacitors.
Because of customer requirements, there may appear additional markings such as LF = Lead Free or LFW = Lead Free Wires on the
label.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4034_PEH200 • 8/25/2015
5
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
Table 1 – Ratings & Part Number Reference
Rated
Capacitance
VDC
25
25
25
25
25
25
25
25
25
40
40
40
40
40
40
40
40
40
40
63
63
63
63
63
63
63
63
63
100
100
100
100
100
100
100
100
100
100
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
350
350
350
VDC
100 Hz
25°C (µF)
15000
22000
33000
47000
68000
100000
150000
220000
330000
6800
10000
15000
22000
33000
47000
68000
100000
150000
220000
4700
6800
10000
15000
22000
33000
47000
68000
100000
1500
2200
3300
4700
6800
10000
15000
22000
33000
47000
330
470
680
1000
1000
1500
2200
3300
3300
4700
4700
6800
6800
10000
12000
15000
15000
220
330
470
Rated
Capacitance
Size
Code
Reference
Size
D x L (mm)
A
C
D
H
J
K
O
T
V
A
B
C
D
H
J
O
O
U
V
A
C
D
H
J
O
O
U
V
A
B
C
D
H
J
K
O
T
V
A
B
C
D
G
H
J
O
L
O
M
T
N
V
V
X
Y
A
B
C
35 x 51
35 x 75
35 x 95
50 x 75
50 x 95
50 x 105
65 x 105
75 x 105
75 x 145
35 x 51
35 x 60
35 x 75
35 x 95
50 x 75
50 x 95
65 x 105
65 x 105
75 x 115
75 x 145
35 x 51
35 x 75
35 x 95
50 x 75
50 x 95
65 x 105
65 x 105
75 x 115
75 x 145
35 x 51
35 x 60
35 x 75
35 x 95
50 x 75
50 x 95
50 x 105
65 x 105
75 x 105
75 x 145
35 x 51
35 x 60
35 x 75
35 x 95
50 x 49
50 x 75
50 x 95
65 x 105
75 x 78
65 x 105
90 x 78
75 x 105
90 x 98
75 x 145
75 x 145
75 x 220
90 x 145
35 x 51
35 x 60
35 x 75
Size
Code
Reference
Size
Ripple Current Maximum
100 Hz 85°C
(A)
11.9
15.2
17.8
20.2
23.4
23.9
26.3
35.0
40.0
9.9
12.0
14.6
17.1
18.9
22.1
25.2
24.9
35.7
34.4
9.0
11.5
13.6
16.1
19.0
22.8
21.8
31.5
34.3
5.7
7.0
8.7
10.3
12.7
15.3
17.3
19.3
26.3
30.8
2.2
2.7
3.4
4.1
4.3
5.9
7.3
10.0
10.5
11.3
12.7
14.7
15.8
18.0
18.8
20.6
21.8
2.0
2.6
3.2
10 kHz 50°C
(A) 2
28.7
34.3
38.0
43.3
47.4
46.1
50.0
63.6
73.1
27.2
31.5
36.1
39.8
41.1
46.3
49.9
46.3
67.7
62.3
26.8
32.7
36.0
37.3
42.0
45.9
42.7
61.3
62.2
18.0
21.3
25.0
28.9
30.4
34.7
37.6
38.7
53.0
60.5
13.5
15.9
18.7
21.2
20.7
28.7
32.5
39.8
43.8
38.2
44.2
51.5
52.1
59.0
58.6
61.6
60.1
13.7
16.6
19.3
10 kHz 40°C
(A)
19.0
24.4
28.1
30.1
34.6
34.7
37.2
49.5
56.9
18.1
21.4
25.5
29.2
28.8
33.6
35.6
36.9
51.2
48.9
18.0
23.5
27.0
26.5
30.9
34.8
32.0
46.8
50.3
12.1
14.7
17.8
21.1
21.5
25.6
27.9
30.1
39.8
47.3
8.7
10.6
13.0
15.6
12.6
19.5
23.2
29.4
29.6
27.2
30.4
36.5
37.3
44.0
43.6
49.2
45.5
8.8
11.0
13.4
Ripple Current
ESR
Maximum
100 Hz 20°C
(mΩ)
25
17
12
11
8
7
7
5
4
33
23
16
12
11
8
7
8
5
5
32
21
15
14
10
10
10
6
5
92
63
43
31
33
23
17
15
10
7
330
240
160
110
120
78
54
38
38
29
30
20
21
14
14
10
12
360
240
170
100 kHz 20°C
(mΩ)
21
14
10
10
7
7
7
5
4
25
18
12
9
9
7
7
8
4
5
21
14
10
11
8
8
9
5
5
63
44
30
21
27
19
14
13
8
6
170
120
84
58
69
42
29
22
22
18
18
12
13
9
9
6
8
170
110
79
ESR
LESL
Part Number
Approximate (nH)
12
12
12
16
16
16
16
17
17
12
12
12
12
16
16
16
16
17
17
12
12
12
16
16
16
16
17
17
12
12
12
12
16
16
16
16
17
17
12
12
12
12
16
16
16
16
17
16
16
17
16
17
17
17
16
12
12
12
PEH200HA5150M(1)
PEH200HC5220M(1)
PEH200HD5330M(1)
PEH200HH5470M(1)
PEH200HJ5680M(1)
PEH200HK6100M(1)
PEH200HO6150M(1)
PEH200HT6220M(1)
PEH200HV6330M(1)
PEH200KA4680M(1)
PEH200KB5100M(1)
PEH200KC5150M(1)
PEH200KD5220M(1)
PEH200KH5330M(1)
PEH200KJ5470M(1)
PEH200KO5680M(1)
PEH200KO6100M(1)
PEH200KU6150M(1)
PEH200KV6220M(1)
PEH200MA4470M(1)
PEH200MC4680M(1)
PEH200MD5100M(1)
PEH200MH5150M(1)
PEH200MJ5220M(1)
PEH200MO5330M(1)
PEH200MO5470M(1)
PEH200MU5680M(1)
PEH200MV6100M(1)
PEH200PA4150M(1)
PEH200PB4220M(1)
PEH200PC4330M(1)
PEH200PD4470M(1)
PEH200PH4680M(1)
PEH200PJ5100M(1)
PEH200PK5150M(1)
PEH200PO5220M(1)
PEH200PT5330M(1)
PEH200PV5470M(1)
PEH200SA3330M(1)
PEH200SB3470M(1)
PEH200SC3680M(1)
PEH200SD4100M(1)
PEH200SG4100M(1)
PEH200SH4150M(1)
PEH200SJ4220M(1)
PEH200SO4330M(1)
PEH200SL4330M(1)
PEH200SO4470M(1)
PEH200SM4470M(1)
PEH200ST4680M(1)
PEH200SN4680M(1)
PEH200SV5100M(1)
PEH200SV512AM(1)
PEH200SX5150M(1)
PEH200SY5150M(1)
PEH200UA3220M(1)
PEH200UB3330M(1)
PEH200UC3470M(1)
L ESL
Part Number
(1) Mounting Code: U2 = plain can, B2 = threaded mounting stud
2
2 m/s forced air, studmounted on 3°C/W aluminum chassis.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4034_PEH200 • 8/25/2015
6
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
Table 1 – Ratings & Part Number Reference cont'd
Rated
Capacitance
VDC
350
350
350
350
350
350
350
350
350
350
350
350
350
350
385
385
385
385
385
385
385
385
385
385
385
385
385
385
385
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
420
420
420
420
420
420
420
420
420
420
420
VDC
100 Hz
25°C (µF)
680
680
1000
1500
2200
2200
3300
3300
4700
4700
6800
10000
10000
15000
220
330
470
470
680
1000
1500
2200
2200
3300
3300
4700
4700
6800
6800
220
330
470
470
680
1000
1500
1500
2200
2200
3300
3300
3300
3300
4700
6800
6800
10000
150
220
330
330
470
680
1000
1500
1500
2200
2200
Rated
Capacitance
Size
Code
Reference
Size
D x L (mm)
D
G
H
J
O
L
O
M
U
N
V
X
Y
Z
A
C
D
G
H
J
K
O
L
T
M
V
N
Y
X
A
C
D
G
H
J
O
L
O
M
O
U
N
T
V
X
Y
Z
A
C
D
G
H
J
K
O
L
T
M
35 x 95
50 x 49
50 x 75
50 x 95
65 x 105
75 x 78
65 x 105
90 x 78
75 x 115
90 x 98
75 x 145
75 x 220
90 x 145
90 x 220
35 x 51
35 x 75
35 x 95
50 x 49
50 x 75
50 x 95
50 x 105
65 x 105
75 x 78
75 x 105
90 x 78
75 x 145
90 x 98
90 x 145
75 x 220
35 x 51
35 x 75
35 x 95
50 x 49
50 x 75
50 x 95
65 x 105
75 x 78
65 x 105
90 x 78
65 x 105
75 x 115
90 x 98
75 x 105
75 x 145
75 x 220
90 x 145
90 x 220
35 x 51
35 x 75
35 x 95
50 x 49
50 x 75
50 x 95
50 x 105
65 x 105
75 x 78
75 x 105
90 x 78
Size
Code
Reference
Size
Ripple Current Maximum
100 Hz 85°C
(A)
3.8
4.0
5.5
6.8
9.4
9.8
10.9
13.1
14.5
15.0
16.8
19.4
23.3
27.3
2.1
2.7
3.3
3.6
4.7
5.9
7.1
9.6
10.0
12.8
13.3
15.2
16.6
20.9
17.4
2.2
2.8
3.4
3.7
4.9
5.9
9.1
8.8
9.6
11.8
11.0
13.8
14.9
13.0
15.6
17.6
21.4
24.7
1.8
2.3
2.9
3.2
4.2
5.1
6.3
8.8
9.1
11.5
12.2
10 kHz 50°C
(A) 2
21.9
20.7
28.8
32.9
39.8
43.5
38.6
54.0
54.7
51.3
57.0
60.8
75.2
79.8
14.6
17.0
19.1
20.9
26.8
31.7
34.1
36.7
42.7
52.5
52.6
57.6
62.4
74.8
58.9
11.4
14.3
16.5
15.0
21.2
24.2
49.1
34.0
29.1
44.1
30.5
52.0
52.8
41.5
57.0
51.2
64.1
69.2
12.1
14.3
16.3
20.4
24.8
28.1
32.0
38.9
42.3
51.6
52.7
10 kHz 40°C
(A)
16.0
12.6
19.5
23.4
29.2
29.4
27.5
37.0
39.5
36.7
42.3
48.5
56.9
64.4
9.3
12.0
14.2
12.8
18.4
22.8
24.7
26.1
28.8
37.4
36.0
43.9
44.4
57.2
47.0
9.6
12.6
14.8
12.7
18.3
21.3
35.1
29.0
25.6
37.1
26.7
45.7
45.2
36.3
42.5
47.7
56.8
64.0
7.8
10.3
12.3
12.6
17.0
20.4
23.2
28.4
28.5
37.0
36.0
Ripple Current
ESR
Maximum
100 Hz 20°C
(mΩ)
120
130
85
57
41
41
31
28
20
22
15
11
11
8
330
220
150
160
110
76
52
38
38
25
26
19
19
14
14
310
210
140
150
110
76
53
52
39
36
29
22
25
26
18
13
13
9
400
270
180
190
140
96
67
47
47
32
33
100 kHz 20°C
(mΩ)
55
66
41
28
21
21
17
15
11
13
8
7
6
5
150
97
69
78
51
35
25
20
20
13
14
11
10
8
8
130
90
63
73
55
38
27
27
21
19
16
10
13
14
10
8
7
5
170
110
76
80
62
44
31
23
23
16
17
ESR
LESL
Part Number
Approximate (nH)
12
16
16
16
16
17
16
16
17
16
17
17
16
16
12
12
12
16
16
16
16
16
17
17
16
17
16
16
17
12
12
12
16
16
16
16
17
16
16
16
17
16
17
17
17
16
16
12
12
12
16
16
16
16
16
17
17
16
PEH200UD3680M(1)
PEH200UG3680M(1)
PEH200UH4100M(1)
PEH200UJ4150M(1)
PEH200UO4220M(1)
PEH200UL4220M(1)
PEH200UO4330M(1)
PEH200UM4330M(1)
PEH200UU4470M(1)
PEH200UN4470M(1)
PEH200UV4680M(1)
PEH200UX5100M(1)
PEH200UY5100M(1)
PEH200UZ515AM(1)
PEH200XA3220M(1)
PEH200XC3330M(1)
PEH200XD3470M(1)
PEH200XG3470M(1)
PEH200XH3680M(1)
PEH200XJ4100M(1)
PEH200XK4150M(1)
PEH200XO4220M(1)
PEH200XL4220M(1)
PEH200XT4330M(1)
PEH200XM4330M(1)
PEH200XV4470M(1)
PEH200XN4470M(1)
PEH200XY4680M(1)
PEH200XX4680M(1)
PEH200VA3220M(1)
PEH200VC3330M(1)
PEH200VD3470M(1)
PEH200VG3470M(1)
PEH200VH3680M(1)
PEH200VJ4100M(1)
PEH200VO415AQ(1)
PEH200VL4150M(1)
PEH200VO4220M(1)
PEH200VM4220M(1)
PEH200VO433AM(1)
PEH200VU433AQ(1)
PEH200VN4330M(1)
PEH200VT4330M(1)
PEH200VV447AM(1)
PEH200VX4680M(1)
PEH200VY4680M(1)
PEH200VZ5100M(1)
PEH200OA3150M(1)
PEH200OC3220M(1)
PEH200OD3330M(1)
PEH200OG3330M(1)
PEH200OH3470M(1)
PEH200OJ3680M(1)
PEH200OK4100M(1)
PEH200OO4150M(1)
PEH200OL4150M(1)
PEH200OT4220M(1)
PEH200OM4220M(1)
LESL
Part Number
(1) Mounting Code: U2 = plain can, B2 = threaded mounting stud
2
2 m/s forced air, studmounted on 3°C/W aluminum chassis.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4034_PEH200 • 8/25/2015
7
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
Table 1 – Ratings & Part Number Reference cont'd
Rated
Capacitance
VDC
420
420
420
420
420
420
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
500
500
500
500
500
500
500
500
500
500
500
500
500
500
VDC
100 Hz
25°C (µF)
2700
3300
3300
4700
4700
8200
150
220
330
330
470
680
1000
1500
1500
1800
2200
2200
3300
3300
4700
4700
8200
100
150
220
220
330
470
680
1000
1500
1800
2200
3300
3300
5600
Rated
Capacitance
Size
Code
Reference
Size
D x L (mm)
O
V
N
X
Y
Z
A
C
D
G
H
J
K
O
L
O
T
M
V
N
X
Y
Z
A
B
C
G
D
H
J
O
T
O
V
X
Y
Z
65 x 105
75 x 145
90 x 98
75 x 220
90 x 145
90 x 220
35 x 51
35 x 75
35 x 95
50 x 49
50 x 75
50 x 95
50 x 105
65 x 105
75 x 78
65 x 105
75 x 105
90 x 78
75 x 145
90 x 98
75 x 220
90 x 145
90 x 220
35 x 51
35 x 60
35 x 75
50 x 49
35 x 95
50 x 75
50 x 95
65 x 105
75 x 105
65 x 105
75 x 145
75 x 220
90 x 145
90 x 220
Size
Code
Reference
Size
Ripple Current Maximum
100 Hz 85°C
(A)
12.4
14.0
15.4
15.7
18.2
23.8
2.0
2.5
3.1
3.5
4.5
5.5
6.7
9.3
9.6
10.6
12.1
12.7
14.7
16.1
16.8
18.9
24.9
1.5
1.9
2.3
2.5
2.9
4.2
5.1
6.8
9.2
10.6
11.1
12.8
15.7
19.6
10 kHz 50°C
(A) 2
57.3
57.5
61.9
57.6
62.2
77.3
14.6
16.8
19.4
20.8
25.5
28.8
32.7
39.2
42.3
47.8
50.1
52.4
57.3
61.9
59.3
61.4
77.7
6.1
7.5
8.4
10.1
10.7
15.8
18.4
21.4
29.8
40.9
33.7
36.5
46.9
53.4
10 kHz 40°C
(A)
40.1
43.7
44.0
46.8
47.5
63.1
9.3
11.9
14.5
12.7
17.5
20.8
23.6
28.2
28.5
34.0
35.6
35.8
43.7
43.9
47.6
46.9
63.4
3.9
4.9
5.8
6.1
7.7
10.5
12.8
15.5
21.0
28.2
25.1
29.0
35.4
42.6
Ripple Current
ESR
Maximum
100 Hz 20°C
(mΩ)
24
22
22
16
17
10
350
240
160
170
120
86
60
43
43
43
29
30
20
21
14
16
10
1290
670
570
595
390
280
195
130
90
71
62
43
38
31
100 kHz 20°C
(mΩ)
10
11
12
8
9
5
150
99
66
75
58
41
29
22
22
22
15
16
10
11
8
9
5
760
390
345
365
234
165
115
79
57
45
40
28
24
21
ESR
LESL
Part Number
Approximate (nH)
16
17
16
17
16
16
12
12
12
16
16
16
16
16
17
17
17
16
17
16
17
16
16
12
12
12
12
12
16
16
16
17
16
17
17
16
16
PEH200OO427AM(1)
PEH200OV4330M(1)
PEH200ON4330M(1)
PEH200OX4470M(1)
PEH200OY4470M(1)
PEH200OZ4820M(1)
PEH200YA3150M(1)
PEH200YC3220M(1)
PEH200YD3330M(1)
PEH200YG3330M(1)
PEH200YH3470M(1)
PEH200YJ3680M(1)
PEH200YK4100M(1)
PEH200YO4150M(1)
PEH200YL4150M(1)
PEH200YO418AM(1)
PEH200YT4220M(1)
PEH200YM4220M(1)
PEH200YV4330M(1)
PEH200YN4330M(1)
PEH200YX4470M(1)
PEH200YY4470M(1)
PEH200YZ4820M(1)
PEH200ZA3100M(1)
PEH200ZB3150M(1)
PEH200ZC3220M(1)
PEH200ZG3220M(1)
PEH200ZD3330M(1)
PEH200ZH3470M(1)
PEH200ZJ3680M(1)
PEH200ZO4100M(1)
PEH200ZT4150M(1)
PEH200ZO418HM(1)
PEH200ZV4220M(1)
PEH200ZX4330M(1)
PEH200ZY4330M(1)
PEH200ZZ4560M(1)
LESL
Part Number
(1) Mounting Code: U2 = plain can, B2 = threaded mounting stud
2
2 m/s forced air, studmounted on 3°C/W aluminum chassis.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4034_PEH200 • 8/25/2015
8
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
Mechanical Data
Polarity and Reversed Voltage
Aluminium Electrolytic capacitors manufactured for use in DC applications contain an anode foil and a cathode foil. As such, they are
polarized devices and must be connected with the +ve to the anode foil and the -ve to the cathode foil. If this were to be reversed then
the electrolytic process that took place in forming the oxide layer on the anode would be recreated in trying to form an oxide layer on
the cathode. In forming the cathode foil in this way, heat would be generated and gas given off within the capacitor, usually leading to
catastrophic failure.
The cathode foil already possesses a thin stabilized oxide layer. This thin oxide layer is equivalent to a forming voltage of approximately
2 V. As a result, the capacitor can withstand a voltage reversal of up to 2 V for short periods. Above this voltage, the formation process
will commence. Aluminium Electrolytic capacitors can also be manufactured for use in intermittent AC applications by using two anode
foils in place of one anode and one cathode.
Mounting Position
The capacitor can be mounted upright or inclined to a horizontal position.
Clamp Fixing
Clips must be ordered separately.
Stud Fixing
Nylon cap nut must be ordered separately. For the stud fixing insulated version, the outer insulation serves as lock washer.
Maximum tightening torque:
M8 = 3 Nm
M12= 8 Nm
Maximum chassis thickness 5 mm.
Screw Terminals
M5 x 10 according to DIN 41.248.
Maximum tightening torque = 2.5 Nm.
Must be ordered separately.
Recommended maximum connector thickness with delivered screw = 4 mm. M6 thread upon request.
Insulating Cup
PEH200 is supplied with a 0.8 mm thick polypropylene insulating cup. Voltage proof of the insulating cup: ≥ 4,000 VDC
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4034_PEH200 • 8/25/2015
9
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
Marking
KEMET Logo
Part Number Code
Rated Capacitance
Rated Voltage (VDC)
Capacitance Tolerance
Operating Temperature
Date of Manufacture,
Batch Number
Made in The
European Union
Construction
Screw Terminal
Insulating Cup
Detailed Cross Section
Safety Vent
Deck
Aluminum Can
Laser Welded
Terminal Tabs
Laser Welded
Terminal Tab
Margin
Aluminum Can
Insulating Cup
Deck
Paper Spacer Impregnated
with Electrolyte
(First Layer)
Polarity Mark (+)
Cathode Aluminum
Foil, Etched
(Second Layer)
Paper Spacer Impregnated
with Electrolyte
(Third Layer)
Screw Terminal (+)
Anode Aluminum Foil, Etched,
Covered with Aluminum Oxide
(Fourth Layer)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Safety Vent Plug
Screw Terminal (-)
A4034_PEH200 • 8/25/2015
10
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
Construction cont'd
The manufacturing process begins with the anode foil being
electrochemically etched to increase the surface area and then
“formed” to produce the aluminum oxide layer. Both the anode and
cathode foils are then interleaved with absorbent paper and wound
into a cylinder. During the winding process, aluminum tabs are
attached to each foil to provide the electrical contact.
Extended cathode
Anode foil
The deck, complete with terminals, is attached to the tabs and then
folded down to rest on top of the winding. The complete winding
is impregnated with electrolyte before being housed in a suitable
container, usually an aluminum can, and sealed. Throughout the
process, all materials inside the housing must be maintained at the
highest purity and be compatible with the electrolyte.
Each capacitor is aged and tested before being sleeved and
packed. The purpose of aging is to repair any damage in the oxide
layer and thus reduce the leakage current to a very low level. Aging
is normally carried out at the rated temperature of the capacitor and
is accomplished by applying voltage to the device while carefully
controlling the supply current. The process may take several hours
to complete.
Damage to the oxide layer can occur due to variety of reasons:
• Slitting of the anode foil after forming
• Attaching the tabs to the anode foil
• Minor mechanical damage caused during winding
A sample from each batch is taken by the quality department after
completion of the production process.
The following tests are applied and may be varied at the request
of the customer. In this case the batch, or special procedure, will
determine the course of action.
Electrical:
• Leakage current
• Capacitance
• ESR
• Impedance
• Tan Delta
Mechanical/Visual:
• Overall dimensions
• Torque test of mounting stud
• Print detail
• Box labels
• Packaging, including packed
quantity
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Foil tabs
Tissues
Cathode foil
Etching
Forming
Winding
Decking
Impregnation
Assembly
Aging
Testing
Sleeving
Packing
A4034_PEH200 • 8/25/2015
11
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Wyboston, United Kingdom
Tel: 44-1480-273082
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Northeast
Wilmington, MA
Tel: 978-658-1663
Southeast
Lake Mary, FL
Tel: 407-855-8886
Central
Novi, MI
Tel: 248-994-1030
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Irving, TX
Tel: 972-915-6041
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4034_PEH200 • 8/25/2015
12
Screw Terminal Aluminum Electrolytic Capacitors – PEH200 Series, +85°C
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4034_PEH200 • 8/25/2015
13