REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES - DF -S P0 P1 d E F W B A P C D D1 D2 W1 Fig.: Configuration of DB-S REEL TAPING ITEM Carrier width SYMBOL A SPECIFICATIONS (mm) 10.2 0.1 SPECIFICATIONS (inch) 0.402 0.004 Carrier length B 10.3 0.1 0.406 0.004 Carrier depth C 4.25 0.1 0.167 0.004 Sprocket hole d 1.55 0.1 0.0631 0.002 Reel outside diameter D 330.0 2.0 12.992 0.079 Reel inner diameter D1 16.4 2.0 0.646 0.079 Feed hole diameter D2 13.0 0.2 0.512 0.008 Sprocket hole position E 1.75 0.1 0.069 0.004 Punch hole position F 7.5 0.1 0.295 0.004 Punch hole pitch P 12.0 0.1 0.472 0.004 Sprocket hole pitch P0 4.0 0.1 0.157 0.004 Embossment center P1 2.0 0.1 0.079 0.004 Tape width W 16.0 0.3 0.63 0.012 Reel width W1 22.4 1.0 0.882 0.039 NOTE: 1.Devices are packed in accordance with EIA stand RS-481-A and specifications listed above. Available only for DB-S devices. 2. Available on 13 inch ( 1000 c.t. ) diameter reels. www.paceleader.tw