REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES - MINI DIP P0 P P1 d E F B 4 O W C 8 O T A D D1 D2 W1 Fig.: Configuration of MINI DIP REEL TAPING ITEM Carrier width Carrier length Carrier depth Sprocket hole Reel outside diameter Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width Reel width Notes : E7 SYMBOL A B C d D D1 D2 E F P P0 P1 T W W1 SPECIFICATIONS (mm) 5.0 0.1 3.2 0.1 2.9 0.1 1.5 0.1/-0 178 2.0 8.0 0.2 13 0.5 1.75 0.1 5.5 0.5 8.0 0.1 4.0 0.1 2.0 0.05 2.65 0.1 12.0+0.3/-0.1 16.8 2.0 SPECIFICATIONS (inch) 0.197 0.004 0.126 0.004 0.114 0.004 0.059 0.004 7.008 0.079 0.315 0.008 0.512 0.020 0.069 0.004 0.217 0.020 0.315 0.004 0.157 0.004 0.079 0.002 0.104 0.004 0.472+0.012/-0.004 0.661 0.079 1.Devices are packed in accordance with EIA stand RS-481-A and specifications listed above. 2.Available on 7 inch ( 500 c.t. ) or 13 inch ( 3000 c.t. ) diameter reels. Visit http:// www.rectron.com for complete datasheets