REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES-SOD-123 Fig.: Configuration of SOD-123 TAPING ITEM Carrier width Carrier length Carrier depth Sprocket hole Reel outside diameter Reel inner diameter Feed hole diameter Strocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width SYMBOL A0 B0 K0 SPECIFICATIONS (mm) 1.95 Max. 4.04 Max. 1.67 Max. SPECIFICATIONS (inch) 0.077 Max. 0.159 Max. 0.066 Max. D A B C E F P P0 P1 t W 1.55 0.05 178 1.0 54 Min. 13.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 4.0 0.10 2.0 0.05 0.216 Max. 8.0+0.2/-0.1 0.061 0.002 7.009 0.039 2.126 Min. 0.512 0.008 0.069 0.004 0.138 0.002 0.158 0.004 0.158 0.004 0.079 0.002 0.009 Max. 0.315+0.008/-0.004 Reel width T 12.5 Max. 0.492 Max. Punch hole diameter D1 1.25 Max. 0.049 Max. Note : E11 Devices are packed in accordance with EIA standard RS-481-A and specification given above. Available only for SOD-123 devices. Visit http:// www.rectron.com for complete datasheets