R32 Series Features • ± 0.1% Repeatability • 11−Pin Octal Base • Knob with Calibrated Scale • 3−Timing Ranges • Impact Proof Dust Cover • IC Hybrid Circuitry for Timing DPDT, 10 Amp AC & DC Adjustable Slow Release (Delay On Release) Time Delay Relays. D17 .242 (6.2) Alternate Knob Style .563 (14.3) DPDT, 2 Form “C” 2.875 (73.02) Ext. Switch 6 5 7 4 8 3 9 2 10 1 11 + INPUT − 2.374 (60.32) OPERATION DELAY ON RELEASE− Input voltage must be applied continuously to operate the internal relay. When the control switch is closed, the relay energizes. When the control switch is opened, timing begins. When timing is complete, the relay will deenergize. Time may be reset to zero during timing by closing the control switch. CONTROL SWITCH N.O. RELAY CONTACTS ON 1.750 (44.45) Electrical Specifications Contact Rating: 10 Amps 120 VAC, 30 VDC−8 Amp, 1/2 HP @ 240 VAC, 1/3 HP @ 120 VAC Life: 500,000 ops @ 120 VAC, 10A resistive 1,000,000 ops @ 120 VAC, 5A resistive 2,000,000 ops @ 120 VAC, 2A resistive Mechanical Life: 50,000,000 operations OFF ON TIME OFF Input Nominal Input voltage: See Chart Steady state input current: See Chart AC OPERATED Timing Max. Contact Cur. @ 28VDC or 120VAC Diag No. NTE Type No. Nom. Voltage Contact Arr. Input Cur. Nom. R32−11A10−120K 120VAC/DC DPDT 20mA 10A D17A R32−11A10−120L 120VAC/DC DPDT 20mA 10A D17A R32−11A10−120M 120VAC/DC DPDT 20mA 10A D17A R32−11D10−24K 24VDC/AC DPDT 40mA 10A D17A R32−11D10−24L 24VDC/AC DPDT 40mA 10A D17A DC OPERATED ACCESSORIES MOUNTING STYLES DESCRIPTION NTE TYPE NO. SURFACE MOUNT 11−PIN OCTAL R95−104 PANEL MOUNT 11−PIN OCTAL R95−119 DIN RAIL MOUNT 11−PIN OCTAL R95−114 DIN RAIL MOUNT 11−PIN OCTAL R95−182 NTE Electronics, Inc. Voice (973) 748−5089 Timing adjustment modes available: 0.1 to 10 sec (K−suffix) 1.8 to 180 sec (L−suffix) 3.0 to 300 sec (M−suffix) Repeat Accuracy ± 0.1% − constant voltage & temperature Percent Timing change over temperature & voltage range: ± 10% Timing tolerance at high end of range: −0, +40% Timing tolerance at low end of range: +0, −40% Reset Time: 100 mS max Protection Transient: UL508 surge test 5000V for 50 mS Dielectric Breakdown Coil To Contact: 1500 VAC Across Open Contact: 1000 VAC Noise Immunity: NEMA ICS 2−230 2500 VAC Environmental Characteristics Operating: −10°C to +55°C Storage: −55°C to +85°C Weight Std: 4 oz (115 gram) approx. FAX (973) 748−6224 http://www.nteinc.com 43