R62 Series Features 16 Time Ranges in Single Timer (0.1 sec. to 120 min.) User Sets Time Ranges No Math − Just Flip Switches Instructions Right on Unit Fine Tuning Knob for Precision Timing Pin for Pin Interchangeable with Timers in the Field − No Rewiring AC or DC Operation CMOS Digital Circuitry − 0.5% Repeatable Accuracy • • Programmable, DPDT, 10 Amp, AC or DC, Single Shot Time Delay Relays. D36 TIME RANGE Min Max 0.1 0.25 0.15 0.5 0.3 1.0 0.5 2.0 1.0 4.0 2.0 8.0 4.0 15 8.0 30 15 60 30 120 Knob Style A B C D E F G H I J .242 (6.2) Alternate Knob Style .600 (15.24) Switches are recessed. K L M N O P 2.800 (71.12) 1.0 2.0 4.0 8.0 15 30 4.0 8.0 15 30 60 120 Seconds • • • Minutes • • DPDT, 2 Form “C” Ext. Switch 2.400 (60.96) OPERATION SINGLE SHOT− Upon closure of the control switch, output switch operates and time period begins. The time period is not affected by duration of the control switch closure. At the end of time period, output switch returns to normal. Continuous power must be furnished to this timer. CONTINUOUS ON POWER OFF CONTROL SWITCH ON OUTPUT SWITCHING ON 7 8 4 3 9 2 (DC) + (AC) L 10 1 11 INPUT − (DC) N (AC) Electrical Specifications Contact Rating: 10 Amps 240VAC or less, 1/3 HP, 240VAC or 120VAC Pilot Duty 345VA, 120VAC or 240VAC, 50/60HZ Life: 500,000 operations at full load Mechanical Life: 7,000,000 operations at no load OFF DELAY OFF Input Nominal Input voltage: See Chart Steady state input current: See Chart AC or DC OPERATED Timing Max. Contact Cur. @ 28VDC or 120VAC Diag No. Timing adjustment modes available: See Timing Range Chart Nom. Voltage Contact Arr. Input Cur. Nom. R62−11AD10−12 12VAC/DC DPDT 167mA 10A D36 R62−11AD10−24 24VAC/DC DPDT 83mA 10A D36 R62−11AD10−120 120VAC/DC DPDT 17mA 10A D36 NTE Type No. 6 5 1.770 (44.95) Repeat Accuracy ± 0.5% − after established at steady temperature (4 hours) Timing tolerance at high end of range: −0, +10% Timing tolerance at low end of range: +0, −50% Reset Time: 60 mS typ Protection ACCESSORIES MOUNTING STYLES DESCRIPTION NTE TYPE NO. SURFACE MOUNT 11−PIN OCTAL R95−104 PANEL MOUNT 11−PIN OCTAL R95−119 DIN RAIL MOUNT 11−PIN OCTAL R95−114 DIN RAIL MOUNT 11−PIN OCTAL R95−182 68 NTE Electronics, Inc. Transient: surge test 10,000V for 20 mS Dielectric Breakdown Coil To Contact: 1850 VAC Across Open Contact: 1850 VAC Environmental Characteristics Operating: −20°C to +55°C Weight Std: 4.5 oz (130 grams) approx. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com