Features • • • • • Hot molded carbon element One piece housing and bushing Stainless steel shaft Compact size Meets or exceeds specifications of MIL–R–94 — QPL Listed PEC SLU/RV6LAY Series Potentiometer – 1/2 Watt, 1/8” dia. locking shaft P5 .469 (11.9) .036 (0.19) 1/4–32 NEF–2A .125 (3.2) Dia .250 (6.35) .164 (4.2) L .510 (13.0) Dia .030 (.762) Typ .065 (1.6) PEC No. NTE Part No. Military No. Value (Ohms) Shaft Length Diag No. SLU1011S20 501–0105 RV6LAYSA101A 100 5/8” P5 SLU5011S20 501–0106 RV6LAYSA501A 500 5/8” P5 SLU1021S20 501–0107 RV6LAYSA102A 1K 5/8” P5 SLU2521S20 501–0108 RV6LAYSA252A 2.5K 5/8” P5 SLU5021S20 501–0109 RV6LAYSA502A 5K 5/8” P5 SLU1031S20 501–0110 RV6LAYSA103A 10K 5/8” P5 SLU2531S20 501–0111 RV6LAYSA253A 25K 5/8” P5 SLU5031S20 501–0112 RV6LAYSA503A 50K 5/8” P5 SLU1041S20 501–0113 RV6LAYSA104A 100K 5/8” P5 SLU2541S20 501–0114 RV6LAYSA254A 250K 5/8” P5 SLU5041S20 501–0115 RV6LAYSA504A 500K 5/8” P5 SLU1051S20 501–0116 RV6LAYSA105A 1M 5/8” P5 .091 (2.3) Typ .016 (0.4) .211 (5.35) .066 (1.7) 45° 32° 32° Terminal End .240 (6.1) Shaft End L = Shaft Length (See Table) Specifications Electrical Resistance Range – Linear Taper: 100Ω to 1 Meg Ω Resistance Tolerance: ±10% Power Rating: 1/2 Watt @ 70°C derated to 0 Watts @ 120°C Insulation Resistance: 10K Meg Ω (Dry) 100K Meg Ω (Wet) Dielectric Strength: 750V RMS at sea level Operating Voltage: 350V subject to power rating Mechanical Mechanical Rotation: 295° Operating Torque: 0.5 oz/in to 6 oz/in Rotation Life: 25,000 cycles Environmental Operating Temperature: –65°C to +125°C Resistance to Soldering Heat: 350°C for 5 seconds Load Life: 1000 hr. at 70°C NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com 9