Series D2W 2-3.5 Amps • 120/240 Vac • AC Output SIP • Triac Output • Printed Circuit Board Mount • Internal Snubber • Zero Voltage Switching The D2W Series features an epoxycoated package that provides exceptional environmental protection. Pinouts are compatible with Series 6 and OAC type I/O modules. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. CURRENT DERATING CURVE MODEL NO. INPUT SPECIFICATIONS ➀ D2W202F D2W203F D2W203F-11 Control Voltage Range 3-32 Vdc 3-32 Vdc 3-32 Vdc Nominal Input Impedance 1500 Ohm 1500 Ohm 1500 Ohm Typical Input Current @ 5 Vdc 3.0 mAdc 3.0 mAdc 3.0 mAdc Must Turn On Voltage 3.0 Vdc 3.0 Vdc 3.0 Vdc 1.5 Must Turn Off Voltage 1.0 Vdc 1.0 Vdc 1.0 Vdc 1.0 OUTPUT SPECIFICATIONS ➀ 0.5 Operating Voltage Range (47-63 Hz) 24-280 Vrms 24-280 Vrms 24-280 Vrms Load Current Range .06-2.0 Arms .06-3.0 Arms .06-3.5 Arms LOAD CURRENT (AMPS) 3.5 D2W203F-11 3.0 D2W203F 2.5 2.0 D2W202F 20 40 60 AMBIENT TEMPERTURE (ºC) 80 Max. Load Current vs. Temp. Transient Over-Voltage 600 Vpk 600 Vpk 600 Vpk Max. Surge Current, (16.6ms) 28 Apk 70 Apk 80 Apk 200 V/µsec 200 V/µsec 200 V/µsec Max.Off-State Leakage @ Rated Voltage 8 mArms 8 mArms 8 mArms Max. On-State Voltage Drop @ Rated Current 1.4 Vpk 1.4 Vpk 1.4 Vpk Max.Turn-On Time 1/2 cycle 1/2 cycle 1/2 cycle Max. Turn-Off TIme 1/2 cycle 1/2 cycle 1/2 cycle 0.5 0.5 0.5 Min. Off-State dv/dt @ Max. Rated Voltage .47 MAX. (11.9) 1.18 MAX. (29.9) CONTROL ➂ LOAD Power Factor (Min.) WIth Max. Load .39 TYP. (9.9) .200 (5.1) 4 3 .700 (17.8) 2 1 1.100 (27.9) GENERAL SPECIFICATIONS .12 (3.0) .040 (1.0) DIA. (4 PLACES) 1.7 MAX. (43.2) PIN PIN PIN PIN .050 TYP. (1.3) 1: 2: 3: 4: AC LOAD AC LOAD +DC CONTROL -DC CONTROL All dimensions are in inches (millimeters) Dielectric Strength ➁ Insulation Resistance (Min.) @ 500 Vdc 109 Ohm 10 pF Ambient Operating Temperature Range Ambient Storage Temperature Range -30 to 80ºC -30 to 125ºC MECHANICAL SPECIFICATIONS Weight: (typical) GENERAL NOTES ➀ ➁ ➂ FastFax Document No. 116 SERIES D2W 032698, PAGE 1 OF 1 ➁ Max. Capacitance Encapsulation: APPROVALS UL E116950 CSA LR81689 4000 Vrms 0.6 oz. (17 g) Thermally Conductive Epoxy ©1998 CRYDOM CORP, Specifications subject to change without notice. All parameters at 25ºC unless otherwise specified. Dielectric and insulation resistance are measured between input and output. Off-State dv/dt test method per EIA/NARM standard RS-443. For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected]