Series SDV, SDI 1.5 Amp • 120/240Vac • 16 PIN DIP Package The Series SDV and SDI solid state relays are rated at 1.5 Amps RMS at ambient temperatures up to 40ûC. The compact 16 pin DIP package is perfect for high density printed circuit boards. The SDV is voltage operated, and the SDI is current operated. Both are offered in either zero voltage or random switching (R) versions. • Compact for High Density PCB M ount • DC Control • SCR Output Manufactured in Crydom's ISO 9002 Certified facility for optimum product performance and reliability. CURRENT DERATING CURVE MODEL NO. INPUT SPECIFICATIONS ➀ LOAD CURRENT (AMPS) Control Voltage Range SDV2415 1.0 ------ 10-35 mA 10-35 mA Nominal Input Impedance 270 Ohm 270 Ohm Typical Input Current @ 5 Vdc 15 mAdc 15 mAdc ------ 3.5 Vdc 3.5 Vdc ------ 1.0 Vdc Must Turn Off Voltage 20 40 60 PIN PIN PIN PIN INPUT OUTPUT -- AC 8: AC LOAD 10:AC LOAD 16:+DC CONTROL 1: -DC CONTROL 8 1 .19 (4.8) .265 (6.7) .850 (21.6) 600 Vpk Transient Over-Voltage 30 Apk Max. Surge Current, (16.6ms) Min. Off-State dv/dt @ Max. Rated Voltage ➂ .01 mArms Max. On-State Voltage Drop @ Rated Current 1.2 Vpk 1/2 cycle Max.Turn-On Time .125 (3.2) 16 .60 (15.2) .300 (7.6) Dielectric Strength ➁ 3750 Vrms ➁ Ambient Operating Temperature Range 8 All dimensions are in inches (millimeters) Ambient Storage Temperature Range ➀ ➁ ➂ Encapsulation: All parameters at 25¼C unless otherwise specified. Dielectric and insulation resistance are measured between input and output. Off-State dv/dt test method per EIA/NARM standard RS-443. APPROVALS UL 116950 CSA LR81689 FastFax Document No.102 SERIES SDV, SDI. Rev. 042302 PAGE 1 OF 1 109 Ohm 2.0 pF -30 to 80˚C -30 to 125˚C M ECHANICAL SPECIFICATIONS Weight: (typical) GENERAL NOTES 0.1 msec 0.5 Max. Capacitance, Input-Output 1 1/2 cycle GENERAL SPECIFICATIONS Insulation Resistance (Min.) @ 500 Vdc 10 0.1 msec 1/2 cycle Power Factor (Min.) WIth Max. Load .70 (17.8) 500 V/µsec Max.Off-State Leakage @ Rated Voltage Max. Turn-Off TIme .025 (.6) 1 mA .025 - 1.5 Arms Load Current Range AC 1 mA 12-280 Vrms Operating Voltage Range (47-63 Hz) 10 + 10 mA ------ OUTPUT SPECIFICATIONS ➀ Max. Load Current vs. Temp. 16 10 mA 1.0 Vdc ------ Must Turn Off Current 80 ------ ------ Must Turn On Current AMBIENT TEMPERATURE (˚C) SDI2415R ------ Must Turn On Voltage 0.5 SDI2415 3.5-10 Vdc 3.5-10 Vdc Control Current Range 1.5 SDV2415R .10 oz. (2.9 g) Thermally Conductive Epoxy ©2002 CRYDOM CORP, Specifications subject to change without notice. For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: [email protected] WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [email protected]. GERMANY: +49 (0)180 3000 506