DC-DC Converter DIP-Package DMV-1 SERIES, 1WATT, 1KVDC, ISOLATED, UNREGULATED FEATURES: 1000Vdc isolation voltage Single output models High efficiency, and low ripple & noise Operating temperature range -40 3 year warranty Model Input voltage (Vdc) ℃ to +85 ℃ Output voltage (Vdc) Output current (mA) Min. Max. Efficiency Typ. DMV1-0310 3.3 30 300 76% DMV1-0311 5 20 200 76% 9 11 111 76% DMV1-0313 12 8.3 83 76% DMV1-0314 15 6.7 67 76% DMV1-0510 3.3 30 300 76% DMV1-0511 5 20 200 80% 9 11 111 80% DMV1-0513 12 8.3 83 77% DMV1-0514 15 6.7 67 78% DMV1-1210 3.3 30 300 77% DMV1-1211 5 20 200 78% 9 11 111 78% DMV1-1213 12 8.3 83 80% DMV1-1214 15 6.7 67 80% DMV1-2410 3.3 30 300 74% DMV1-2411 5 20 200 70% 9 11 111 76% 12 8.3 83 78% 15 6.7 67 80% DMV1-0312 DMV1-0512 DMV1-1212 DMV1-2412 DMV1-2413 DMV1-2414 3.3(3.0~3.6) 5(4.5~5.5) 12(10.8~13.2) 24(21.6~26.4) Notes: Other input and output models may available on request. ELECTRICAL Line regulation --- Load regulation 10% ~ 100% full load Isolation voltage Leakage current < 1mA/1min. 1000Vdc min. Isolation resistance Test at 500VDC 1000m Switching frequency --- www.pairuigroup.com 1.5% max. 15% max. Ω min. 100KHz typ. Page: 1/3 Date: 01/06/2015 * Subject to change without prior notice DC-DC Converter DIP-Package DMV-1 SERIES, 1WATT, 1KVDC, ISOLATED, UNREGULATED ELECTRICAL Ripple & noise Bend width 20MHz 100mVp-p max. Temperature coefficient Rated load Operating temperature range --- Storage temperature range --- ±0.03%/℃ -40℃ to +85℃ -55℃ to +125℃ Short circuit protection --- 1S MTBF --- 3500KHrs Weight --- 1.3g Notes: All the parameters are measured at 25℃ ambient temperature, humidity < 75%, nominal input voltage, full load and after warm-up, unless otherwise specified. MECHANICAL CONNECTION PIN # SINGLE 1 GND 4 +Vin 5 +Vo 7 0V Note: * Unit is mm(inch). TEMPERATURE PROFILE www.pairuigroup.com Page: 2/3 Date: 01/06/2015 * Subject to change without prior notice DC-DC Converter DIP-Package DMV-1 SERIES, 1WATT, 1KVDC, ISOLATED, UNREGULATED NOTE RECOMMENDED TEST AND APPLICATION CIRCUIT CAPACITOR SELECTION INPUT VOLTAGE C1 OUTPUT VOLTAGE C2 3.3VDC 4.7μF 3.3VDC 10μF 5VDC 4.7μF 5VDC 10μF 12VDC 2.2μF 9VDC 4.7μF 24VDC 1.0μF 12VDC 2.2μF -- -- 15VDC 1.0μF www.pairuigroup.com Page: 3/3 Date: 01/06/2015 * Subject to change without prior notice