LGU-150C-R

Constant current LED Drivers
For outdoor use
LGSU-150C Series, 150 Watt, Programmable Dimming
FEATURES:
Programmable constant current output
Universal AC input: 90-305VAC
Active power factor correction
Short circuit, over voltage, over temperature protections
Designed to worldwide safety standards for lighting
Built-in infrared dimming and timer timing
0-10V dimming optional
5 year warranty
Model
Nominal
Input voltage
(Vac)
Output current
(mA)
Output voltage
(Vdc)
Output power
(W)
Min.
Max.
LGSU150-C560R
330-560
267
444
150
LGSU150-C930R
560-930
160
267
150
930-1500
96
160
150
1500-2600
58
96
150
LGSU150-C4300R
2600-4300
34
58
150
LGSU150-C6250R
4300-6250
24
34
150
LGSU150-C1500R
LGSU150-C2600R
90-305
Note: 1. Other output models may available on request;
2. Add suffix "D" for 0~10V dimming option.
ELECTRICAL
Input
Parameters
Symbols
Test Conditions / Comment
Min.
Typ.
Max.
Units
Input voltage
Vin
--
90
--
305
Vac
Input frequency
Fline
--
47
--
63
Hz
Full load, Vin = 110Vac
--
2.1
--
A
Full load, Vin = 220Vac
--
1.0
--
A
Input current
Iin
Inrush current
Iinrush
Cold start, Vin = 230Vac
--
65
--
A
Leakage current
Ileakage
Vin = 277Vac, 50Hz
--
0.75
--
mA
www.pairuigroup.com
Page: 1 / 5
Date: 07/18/2015
*Subject to change without prior notice.
Constant current LED Drivers
For outdoor use
LGSU-150C Series, 150 Watt, Programmable Dimming
ELECTRICAL
Input
Parameters
Power factor
Efficiency
Symbols
Test Conditions / Comment
Min.
Typ.
Max.
Units
Vin = 110Vac
--
0.99
--
PF
Vin = 220Vac
--
0.96
--
PF
Full voltage, full load
87
89
--
%
--
--
5
--
%
LGSU150-C560R
--
--
666
V
LGSU150-C930R
--
--
400
V
LGSU150-C1500R
--
--
240
V
LGSU150-C2600R
--
--
144
V
LGSU150-C4300R
--
--
87
V
LGSU150-C6250R
--
--
51
V
PF
η
Output
Output current accuracy
No load out voltage
--
VNO-Load
Line regulation
Iout-line
Vin from 90Vac to 305Vac
--
--
1
%
Load regulation
Iout-load
Vout from min. to max.
--
--
3
%
Turn-on delay time
Ton_delay
Cold start, power on
--
--
1
S
Iripple
--
--
5%Io
--
mAp-p
--
Vin =115Vac, output load≥50%
--
--
20
%
Ripple
THD
Protection
Over voltage
115~130% rated output voltage. Hiccup mode, the power supply shall return to normal
operation only after the power is turned on again.
Short circuit
Hiccup mode, it will recover automatically after fault condition is removed.
Over temperature
Hiccup mode, it will be back to normal condition after over temperature is removed.
www.pairuigroup.com
Page: 2 / 5
Date: 07/18/2015
*Subject to change without prior notice.
Constant current LED Drivers
For outdoor use
LGSU-150C Series, 150 Watt, Programmable Dimming
ELECTRICAL
Environment
Parameters
Symbols
Test Conditions / Comment
Min.
Typ.
Max.
Units
Storage
Tstorage
Humidity: 5% RH to 95% RH
-40
--
+85
℃
Ta
Startup at rated voltage
-35
--
+60
℃
Tc
Hot-spot on case
--
--
+80
℃
Ha
Non condensing
10
--
95
%
--
200
--
kHrs
--
12
--
kHrs
Ambient operating
temperature
Maximum case
temperature
Operating relative
humidity
MTBF
Life time
TMTBF
Tlife
Dimension(LxWxH)
Full load, 220Vac input,
℃
25
ambient temperature
--
214.0 x 87.0 x 39.5mm
Weight
950g
Safety / EMC
Safety standards
UL8750, UL935, UL1012, UL1310 CLASS 2, EN61347-1, EN61347-2-13
EMI
EN55015
EMS
EN61000-3-2, EN61000-3-3, EN61000-4-2, 3, 4, 5, 6, 8
Notes: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25
Vin = 100Vac to 277Vac.
www.pairuigroup.com
Page: 3 / 5
℃
and
Date: 07/18/2015
*Subject to change without prior notice.
Constant current LED Drivers
For outdoor use
LGSU-150C Series, 150 Watt, Programmable Dimming
MECHANICAL
Unit: mm
ELECTRICAL CURVE
DERATING CURVE
www.pairuigroup.com
STATIC CHARACTERISTIC CURVE
Page: 4 / 5
Date: 07/18/2015
*Subject to change without prior notice.
Constant current LED Drivers
For outdoor use
LGSU-150C Series, 150 Watt, Programmable Dimming
DIMMING FUNCTION
0~10V Dimming
ITEM
Conditions
Value
Maximum Voltage
Normally 10~11V
0~12V
0-10V Input Current
--
0~10mA
10V Output Voltage
Normally 11V
10~12V
10V Output Current
--
10mA Max.
Note: 1. To make the driver operate properly, the load voltage must be controlled above the minimum voltage which
close to 50% of the maximum output voltage is from any given mode.
2. The dimming signal can be less than 1V. As it is for 0-1V ,the output current can maintain 10% of the rated output
current, but the connected LEDs may flicker. It's strongly recommended that keep dimming voltage bigger than 1V.
3. It is not allowed to connect the GND of dimming to the output, or the LED driver can not work as normal.
www.pairuigroup.com
Page: 5 / 5
Date: 07/18/2015
*Subject to change without prior notice.