Constant current LED Drivers For outdoor use LGU-150C Series, 150 Watt FEATURES: Constant current output Universal AC input: 90-305VAC Active power factor correction Short circuit, over voltage, over temperature protections Designed to worldwide safety standards for lighting Cooling by free air convection 5 year warranty Model Nominal Input voltage (Vac) Output voltage (Vdc) Output current (mA) Min. Output power (W) Max. 350 257 429 LGU150-C350 450 200 333 LGU150-C450 700 129 214 LGU150-C700 1050 86 143 LGU150-C1050 1400 64 107 LGU150-C1400 100-277 2100 43 71 LGU150-C2100 2800 32 54 LGU150-C2800 3150 29 48 LGU150-C3150 3500 26 43 LGU150-C3500 4200 22 36 LGU150-C4200 Note: 1. Add suffix for dimming option, “D” (0~10V), “P” (PWM), “T” (Timer); 2. Add suffix for package option, blank(default), “W” or “L”. See mechanical specifications. 150 150 150 150 150 150 151 151 150 151 ELECTRICAL Input Parameters Symbols Test Conditions / Comment Min. Typ. Max. Units Input voltage Vin -- 90 -- 305 Vac Input frequency Fline -- 47 -- 63 Hz Input current Iin Full load, Vin = 230Vac -- 0.75 -- A Inrush current Iinrush Cold start, Vin = 230Vac -- 65 -- A Power factor PF 70%~100% load, Vin = 230Vac -- 0.96 -- PF η Full voltage, full load -- 90 -- % Efficiency www.pairuigroup.com Page: 1 / 6 Date: 01/20/2015 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGU-150C Series, 150 Watt ELECTRICAL Output Parameters Output current accuracy No load out voltage Symbols Test Conditions / Comment Min. Typ. Max. Units -- -- -- 5 -- % LGU150-C350 -- -- 469 V LGU150-C450 -- -- 365 V LGU150-C700 -- -- 235 V LGU150-C1050 -- -- 157 V LGU150-C1400 -- -- 117 V LGU150-C2100 -- -- 82 V LGU150-C2800 -- -- 61 V LGU150-C3150 -- -- 55 V LGU150-C3500 -- -- 50 V LGU150-C4200 -- -- 42 V VNO-Load Line regulation Iout-line Vin from 90Vac to 277Vac -- -- 1 % Load regulation Iout-load Vout from min. to max. -- -- 3 % Iover-shoot Turning power on -- -- 10 % Ton_delay Cold start, power on -- -- 2 S -- -- -- 20 -- % Output Current overshoot Turn-on delay time Ripple Protection Over voltage 115~150% rated output voltage. In latch mode, the power supply shall return to normal operation only after the power is turned on again. Short circuit In hiccup mode, it will recover automatically after fault condition is removed. Over temperature Typ. 110 ℃ Environment Storage Ambient operating temperature Maximum case temperature www.pairuigroup.com Tstorage Humidity: 5% RH to 95% RH -40 -- +85 ℃ Ta Startup at rated voltage -40 -- +70 ℃ Tc Hot-spot on case -- -- +90 ℃ Page: 2 / 6 Date: 01/20/2015 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGU-150C Series, 150 Watt ELECTRICAL Environment Parameters Operating relative humidity MTBF Symbols Test Conditions / Comment Min. Typ. Max. Units Ha Non condensing 10 -- 95 % -- 400 -- kHrs TMTBF Dimension(LxWxH) Full load, 220Vac input, ℃ 25 ambient temperature L: 188.5x78.5x37mm/W: 184.5x87x39.5mm Weight L: 850g / W: 1000g Safety / EMC Safety standards EMC UL8750, UL935, UL1012, UL1310 CLASS 2, EN61347-1, EN61347-2-13 EN55015, FCC Part 15 Class B, EN61000-3-2, EN61000-3-3, EN61000-4-2, 3, 4, 6, 8, 11, EN61547 Notes: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25 Vin = 100Vac to 277Vac. ℃ and MECHANICAL PACKAGE TYPE “L” Unit: mm www.pairuigroup.com Page: 3 / 6 Date: 01/20/2015 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGU-150C Series, 150 Watt MECHANICAL PACKAGE TYPE “W” Unit: mm ELECTRICAL CURVE DERATING CURVE www.pairuigroup.com STATIC CHARACTERISTIC CURVE Page: 4 / 6 Date: 01/20/2015 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGU-150C Series, 150 Watt DIMMING FUNCTION 0~10V Dimming External Resistor Dimming ITEM Conditions Value Maximum Voltage Normally 10~11V 0~12V 0-10V Input Current -- 0~10mA 10V Output Voltage Normally 11V 10~12V 10V Output Current -- 10mA Max. Note: 1. To make the driver operate properly, the load voltage must be controlled above the minimum voltage which close to 50% of the maximum output voltage is from any given mode. 2. The dimming signal can be less than 1V. As it is for 0-1V ,the output current can maintain 10% of the rated output current, but the connected LEDs may flicker. It's strongly recommended that keep dimming voltage bigger than 1V. 3. It is not allowed to connect the GND of dimming to the output, or the LED driver can not work as normal. www.pairuigroup.com Page: 5 / 6 Date: 01/20/2015 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGU-150C Series, 150 Watt DIMMING FUNCTION PWM Dimming ITEM Conditions Value Input Voltage -- 1-10V Input Current -- 10mA PWM Frequency -- 0.5-3KHz PWM Pulse Width -- 0~100% Timer Dimming Note: Above table for Timer dimming is just for reference, it can be adjusted according to the customer's requirements. www.pairuigroup.com Page: 6 / 6 Date: 01/20/2015 *Subject to change without prior notice.