Constant current LED Drivers For outdoor use LGSU-200C Series, 200Watt FEATURES: Constant current output High Efficiency Universal AC input: 90-305VAC Active power factor correction Short circuit, over voltage, over temperature protections IP67 rating Optional dimming(0~10V, PWM, Timer) 5 year warranty Model Input voltage (Vac) Output current (mA) Output voltage (Vdc) Output power (W) Min. Max. LGSU200-C450 450 267 444 200 LGSU200-C700 700 171 286 200 LGSU200-C1050 1050 114 190 200 LGSU200-C1400 1400 86 143 200 LGSU200-C1750 1750 69 114 200 2100 57 95 200 LGSU200-C2450 2450 49 82 200 LGSU200-C2800 2800 43 71 200 LGSU200-C3150 3150 38 63 200 LGSU200-C3500 3400 34 57 200 LGSU200-C4200 4200 29 48 200 LGSU200-C2100 90-305 Note: 1. Add suffix for dimming option, “D” (0~10V), “P” (PWM), “T” (Timer); 2. Other output models may available on request. ELECTRICAL Input Parameters Symbols Test Conditions / Comment Min. Typ. Max. Units Input voltage Vin --- 90 -- 305 Vac Input frequency Fline --- 47 -- 63 Hz Full load, Vin =1100Vac -- 2.1 -- A Full load, Vin = 220Vac -- 1.0 -- A Input current www.pairuigroup.com Iin Page: 1 / 7 Date: 01/20/2015 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-200C Series, 200Watt ELECTRICAL Input Parameters Symbols Test Conditions / Comment Min. Typ. Max. Units Inrush current Iinrush Cold start, Vin = 230Vac -- -- 65 A Leakage current Ileakage Vin = 277Vac, 50Hz -- -- 0.75 mA Vin = 110Vac -- 0.99 -- PF Vin = 220Vac -- 0.96 -- PF Vin = 110Vac -- 90 -- % Vin = 220Vac -- 92 -- % --- -- 5 -- % LGSU200-C450 -- 467 -- V LGSU200-C700 -- 300 -- V LGSU200-C1050 -- 200 -- V LGSU200-C1400 -- 150 -- V LGSU200-C1750 -- 120 -- V LGSU200-C2100 -- 105 -- V LGSU200-C2450 -- 90 -- V LGSU200-C2800 -- 78 -- V LGSU200-C3150 -- 70 -- V LGSU200-C3500 -- 63 -- V LGSU200-C4200 -- 52 -- V Power factor Efficiency PF η Output Output current accuracy No-load output voltage -- VNO-Load Line regulation Iout-line Vin from 90Vac to 305Vac -- -- 1 % Load regulation Iout-load Vout from min. to max. -- -- 3 % Turn-on delay time Ton_delay Cold start, power on -- -- 1 S -- --- -- 20 -- % Ripple Protection Over voltage www.pairuigroup.com 115~130% rated output voltage. In latch mode, the power supply shall return to normal operation only after the power is turn-on again Page: 2 / 7 Date: 01/20/2015 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-200C Series, 200Watt ELECTRICAL Protection Parameters Symbols Test Conditions / Comment Min. Typ. Max. Short circuit In hiccup mode, it will recover automatically after fault condition is removed Over temperature It will recover to normal condition after over temperature condition is removed Units Environment Storage Ambient operating temperature Operating relative humidity MTBF Tstorage Humidity: 5% RH to 100% RH -40 -- +85 ℃ Ta Startup at rated voltage -35 -- +60 ℃ Ha Non condensing 10 -- 100 % -- 350 -- kHrs TMTBF Dimension(LxWxH) Full load, 220Vac input, ℃ 25 ambient temperature 228.0 x 65.5 x 39.5mm Weight 930g Safety / EMC Safety standards UL8750, UL935, UL1012, CSA-C22.2 No.107.1, EN61347-1, EN61347-2-13 EMI EN55015 EMC EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61547 ℃ and Notes: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25 Vin = 90Vac to 305Vac. www.pairuigroup.com Page: 3 / 7 Date: 01/20/2015 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-200C Series, 200Watt MECHANICAL No Dimming & Timer Dimming Version Unit: mm 0~10V Dimming Unit: mm www.pairuigroup.com Page: 4 / 7 Date: 01/20/2015 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-200C Series, 200Watt MECHANICAL PWM Dimming Unit: mm DERATING CURVE www.pairuigroup.com STATIC CHARACTERISTIC CURVE Page: 5 / 7 Date: 01/20/2015 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-200C Series, 200Watt DIMMING FUNCTION 0~10V Dimming External Resistor Dimming ITEM Conditions Value Maximum Voltage Normally 10~11V 0~12V 0-10V Input Current -- 0~10mA 10V Output Voltage Normally 11V 10~12V 10V Output Current -- 10mA Max. Note: 1. To make the driver operate properly, the load voltage must be controlled above the minimum voltage which close to 50% of the maximum output voltage is from any given mode. 2. The dimming signal can be less than 1V. As it is for 0-1V ,the output current can maintain 10% of the rated output current, but the connected LEDs may flicker. It's strongly recommended that keep dimming voltage bigger than 1V. 3. It is not allowed to connect the GND of dimming to the output, or the LED driver can not work as normal. www.pairuigroup.com Page: 6 / 7 Date: 01/20/2015 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-200C Series, 200Watt DIMMING FUNCTION PWM Dimming ITEM Conditions Value Input Voltage -- 1-10V Input Current -- 10mA PWM Frequency -- 0.5-3KHz PWM Pulse Width -- 0~100% Timer Dimming Note: Above table for Timer dimming is just for reference, it can be adjusted according to the customer's requirements. www.pairuigroup.com Page: 7 / 7 Date: 01/20/2015 *Subject to change without prior notice.