P10FG-xxxxE/Z2:1(H30)LF PMB-SERIES Rev.04-2008 2 Watt 2:1 Wide Input Reg. Single and Dual Output 1 - 3 kV DC I/O Isolation DIP16 case Contin. Short Circuit Protection Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de [email protected] The PMB 2Watt series is a family of cost effective 2W single and dual output DC/DC converters with an optional control Pin (SIP). These converters are encapsulated in an ultra miniature SIP8 or DIP16 plastic or metal case. High performance features: continuous / long time short circuit protection with automatic restart and tight line / load regulation, high efficiency operation and output voltage accuracy of ±2% maximum. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ 2:1 Wide Input (see table) Capacitor 35 mA pk-pk Output Specifications Voltage Accuracy Short Circuit Protection Line Regulation Load Regulation (25% - 100%) Ripple and Noise (20Mhz bandwidth) Temperature Coefficient ± 2% Indefinite (Automatic Recovery) ± 0.5% ± 1% 80 mV pk-pk ± 0.02% / °C General Specifications I/O Isolation Voltage (3 sec.) I/O Isolation Capacity I/O Isolation Resistance Switching Frequency Humidity Reliability Calculated MTBF (MIL-HDBK-217F) 1000 VDC (3000 VDC optional)* 60 pF 1000 M Ohm 100 - 650 kHz 95% rel H > 2.732 Mhrs Physical Specifications Case Material Potting Material Weight Non Conductive Black Plastic (UL94V-0 rated) Epoxy (UL94V-0 rated) ~ 6 g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +85°C (ambient) 100°C -40 to +125°C Free Air Convection (10mm distance required) Soldering 260°C, max. (1.5mm from case 10s.) PMB-Series – P10FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/4 Selection Guide Single Output A) A) ) ) d (m d (m a (mA ad (mA a o ) o d L ² L a C ll Lo n. C) Lo (uF) (V D t Mi t Fu d (V D e No Full n n ) a g t t e e e o a n n r % r g rL rre r re y( lta Volt Cur Cur ie nc t Cu put Cu t Vo acito put put pu t Inpu Inpu In Out Out Out Effic Cap Order # SINGLE OUTPUT P10FG-053R3E2:1LF P10FG-0505E2:1LF P10FG-0509E2:1LF P10FG-0512E2:1LF P10FG-0515E2:1LF P10FG-0524E2:1LF P10FG-123R3E2:1LF P10FG-1205E2:1LF P10FG-1209E2:1LF P10FG-1212E2:1LF P10FG-1215E2:1LF P10FG-1224E2:1LF P10FG-243R3E2:1LF P10FG-2405E2:1LF P10FG-2409E2:1LF P10FG-2412E2:1LF P10FG-2415E2:1LF P10FG-2424E2:1LF P10FG-483R3E2:1LF P10FG-4805E2:1LF P10FG-4809E2:1LF P10FG-4812E2:1LF P10FG-4815E2:1LF P10FG-4824E2:1LF 4.5-9 4.5-9 4.5-9 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 15 15 30 30 30 60 15 15 15 15 15 15 8 8 8 8 8 8 6 6 6 6 6 6 492 571 555 555 547 533 205 216 213 208 213 208 98 108 104 104 104 104 48 56 53 53 53 52 3.3 5 9 12 15 24 3.3 5 9 12 15 24 3.3 5 9 12 15 24 3.3 5 9 12 15 24 125 100 56 42 33 21 125 100 56 42 33 21 125 100 56 42 33 21 125 100 56 42 33 21 500 400 222 167 133 83 500 400 222 167 133 83 500 400 222 167 133 83 500 400 222 167 133 83 67 70 72 72 73 75 67 77 78 80 78 80 70 77 80 80 80 80 71 74 78 78 78 80 3300 3300 470 470 470 220 3300 3300 470 470 470 220 3300 3300 470 470 470 220 3300 3300 470 470 470 220 If you need other specifications, please enquire. *OPTIONS: 3 kV I/O Isolation For optional 3kV DC I/O Isolation, please add “H30” before LF! (P10FG-2424E2:1H30LF for 3kV) PMB-Series – P10FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Dual Output ) A) ) (mA d (m mA) ad (mA a ( o ) o ad d L L a C ) o . l o l L D n C i L u uF)² V ll D nt M nt F ) ad ( ge ( t No rent Fu e (V e e o a n r % r g t ( r r L l e a r u u t o r r r y l V C C ie nc t Cu put Cu t Vo acito put put pu t Inpu Inpu In Out Out Out Effic Cap Order # DUAL OUTPUT P10FG-053R3Z2:1LF P10FG-0505Z2:1LF P10FG-0509Z2:1LF P10FG-0512Z2:1LF P10FG-0515Z2:1LF P10FG-0524Z2:1LF P10FG-123R3Z2:1LF P10FG-1205Z2:1LF P10FG-1209Z2:1LF P10FG-1212Z2:1LF P10FG-1215Z2:1LF P10FG-1224Z2:1LF P10FG-243R3Z2:1LF P10FG-2405Z2:1LF P10FG-2409Z2:1LF P10FG-2412Z2:1LF P10FG-2415Z2:1LF P10FG-2424Z2:1LF P10FG-483R3Z2:1LF P10FG-4805Z2:1LF P10FG-4809Z2:1LF P10FG-4812Z2:1LF P10FG-4815Z2:1LF P10FG-4824Z2:1LF 4.5-9 4.5-9 4.5-9 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 20 20 20 25 25 60 15 15 15 15 15 30 8 8 8 8 8 20 6 6 6 6 6 12 471 571 540 533 533 563 188 222 210 208 210 219 94 106 105 104 104 106 47 56 53 53 52 55 ± 3.3 ± 5.0 ± 9.0 ± 12.0 ± 15.0 ± 24.0 ± 3.3 ± 5.0 ± 9.0 ± 12.0 ± 15.0 ± 24.0 ± 3.3 ± 5.0 ± 9.0 ± 12.0 ± 15.0 ± 24.0 ± 3.3 ± 5.0 ± 9.0 ± 12.0 ± 15.0 ± 24.0 ± 63 ± 50 ± 28 ± 21 ± 17 ± 10 ± 63 ± 50 ± 28 ± 21 ± 17 ± 10 ± 63 ± 50 ± 28 ± 21 ± 17 ± 10 ± 63 ± 50 ± 28 ± 21 ± 17 ± 10 ± 250 ± 200 ± 111 ± 83 ± 67 ± 42 ± 250 ± 200 ± 111 ± 83 ± 67 ± 42 ± 250 ± 200 ± 111 ± 83 ± 67 ± 42 ± 250 ± 200 ± 111 ± 83 ± 67 ± 42 70 70 74 75 75 71 73 75 79 80 79 76 73 78 79 80 80 78 73 74 79 79 80 75 ± 1000 ± 1000 ± 220 ± 220 ± 220 ± 100 ± 1000 ± 1000 ± 220 ± 220 ± 220 ± 100 ± 1000 ± 1000 ± 220 ± 220 ± 220 ± 100 ± 1000 ± 1000 ± 220 ± 220 ± 220 ± 100 If you need other specifications, please enquire. *OPTIONS: 3 kV I/O Isolation For optional 3kV DC I/O Isolation, please add “H30” before LF! (P10FG-2424Z2:1H30LF for 3kV) PMB-Series – P10FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/4 Package / Pinning / Derating 10.16 (0.40) 1 0.50 (0.02) 17.78 (0.70) 8 All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. Bottom View 9 16 2.54 (0.10) DIP16 – PLASTIC CASE 0.50 (0.02) 14.00 (0.55) PEAK 10.16 (0.40) Modelcode Datecode 23.40 (0.92) 3.05 (0.12) PIN CONNECTIONS # SINGLE DUAL 1 - Vin - Vin 2 - Vin - Vin 6 N.C. Common 8 N.C. - Vout 9 +Vout +Vout 11 - Vout Common 15 +Vin +Vin 16 +Vin +Vin (same pinning for 3kV) App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH ² = Tested by nominal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. PMB-Series – P10FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 4/4