Release by PARA LIGHT DCC PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: [email protected] http://www.para.com.tw DATA SHEET PART NO. : EP503IR4L076W REV : A/4 CUSTOMER’S APPROVAL : _______________ DRAWING NO. : DS-50-10-XXX DCC : ____________ DATE : 2012-05-05 Page : 1 Release by PARA LIGHT DCC Enhance Power LED EP503IR4L076W REV:A/4 ●Package Dimension ° Note: 1. All dimensions are in millimeters. 2. Tolerance is ± 0.25mm (.010") unless otherwise noted. ●Feature 1. Long operating life. 2. Low voltage DC operated. 3. Instant light (Less than 100NS). 4. RoHS Compliant. 5. Cool beam safe to touch. 6. Compatible to assemble, lead free reflow soldering process. 7. Night surveillance CCD camera illumination. DRAWING NO. : DS-50-10-XXX DATE : 2012-05-05 Page : 2 Release by PARA LIGHT DCC Enhance Power LED EP503IR4L076W REV:A/4 ●Chip Material 1. Dice Material : GaAlAs 2. Light Color : Infrared 3. Lens Color : Water Clear ●Absolute Maximum Rating(Ta=25℃) Symbol Parameter Rating Unit IF DC Forward Current 700/1000 mA 1250 mA Peak Pulse Current; Ipulse (tp≦100us, duty cycle=0.25) VR Reverse Voltage 5 V Ir Reverse Current(VR=5V) 50 uA Tj LED Junction Temperature(at IF=1000mA) 115 ℃ *Topr Operating Temperature -30 ~ +100 ℃ *Tstg Storage Temperature -40 ~ +100 ℃ Tsol Manual Soldering Time at 260℃(Max.) 5 seconds Note : * : Temperature for using with aluminum board. ●Electro-Optical Characteristic(Ta=25℃) Parameter Symbol Min. Typ. Max. Radiant Intensity IE Viewing Angle 2θ1/2 130 deg Peak Emission Wavelength λp 850 nm Spectral Line Half-Width Δλ 50 nm Forward Voltage VF 1.6/1.8 V Radiant Power Power Reverse Current IR 130/160 140/185 400 DRAWING NO. : DS-50-10-XXX Unit Test Condition mw/sr IF=700mA/1000mA IF=700mA/1000mA IF=700mA/1000mA 500 mW 50 μA DATE : 2012-05-05 VR = 5V Page : 3 Release by PARA LIGHT DCC Enhance Power LED EP503IR4L076W REV:A/4 ●Typical Optical and Electrical 100 Intensity (%) 80 60 40 20 0 400 500 600 700 800 900 1000 Wavelength(nm) Relative Intensity VS Wavelength 3.3 3.0 VF(V) 2.7 2.4 1.8 1.6 1.5 150 300 450 600 750 900 1050 IF(mA) DRAWING NO. : DS-50-10-XXX DATE : 2012-05-05 Page : 4 Release by PARA LIGHT DCC Enhance Power LED EP503IR4L076W REV:A/4 ●Typical Optical and Electrical 860 Wavelength(nm) 855 850 845 840 835 830 200 400 600 800 1000 1200 1400 IF(mA) Forward Current VS Wavelength 260 230 IE (mw/sr) 200 170 140 110 80 200 400 600 800 1000 1200 1400 IF(mA) Forward Current VS IE DRAWING NO. : DS-50-10-XXX DATE : 2012-05-05 Page : 5 Release by PARA LIGHT DCC Enhance Power LED EP503IR4L076W REV:A/4 ●Typical Optical and Electrical typical polar radiation pattern for lambertian ●Bin Code List Radiant Intensity(IE)(Unit: mw/sr ,IF=1000mA) Bin Code Min Max Z8 160 180 Z9 180 200 Z10 200 220 Including test tolerance ± 10% Forward Voltage(VF)(Unit: V ,IF=1000mA) Bin Code Min Max V2 1.65 1.75 V3 1.75 1.85 V4 1.85 1.95 V5 1.95 2.05 V6 2.05 2.15 V7 2.15 2.25 Including test tolerance±0.1V Dominant Wavelength (Hue)(Unit: nm , IF=1000mA) Bin Code IR4 Min Max 840 870 Including±2nm test tolerance DRAWING NO. : DS-50-10-XXX DATE : 2012-05-05 Page : 6 Release by PARA LIGHT DCC Enhance Power LED EP503IR4L076W REV:A/4 ●Label Explanation PART NO: EP503IR4L076W LOT NO: L E M 10 1 A B C D E 001 F A---L: Local F: Foreign B---E: E-power C---M: For series number D---Year E---Month F---Spec. BIN NO: Bin Code ●Caution Handling note: Do not touch LED’s lens. DRAWING NO. : DS-50-10-XXX DATE : 2012-05-05 Page : 7 Release by PARA LIGHT DCC Enhance Power LED EP503IR4L076W REV:A/4 ●Packing Specification - 7.90±0.20 + 15.50±0.20 Cardboard A (50pcs*60tube=3000pcs) 105 105 Cardboard B (3000pcs*6carton=18000pcs) 490 330 250 Note: 1. All dimensions are in millimeters. 2. Normal packing Quantity:3000pcs. 3. The carton B contains 6 cartons A at maximum. DRAWING NO. : DS-50-10-XXX DATE : 2012-05-05 Page : 8 Release by PARA LIGHT DCC Enhance Power LED EP503IR4L076W REV: A/4 ●Suggest Soldering Pad Dimension 2 *1.50 6.40 5.82 11.65 16.65 Solder Mask Solder Pad Heat slug indepedent to electrical contact. Apply heat-dissipating paste here 2 *1.15 Note: 1. All dimensions are in millimeters. 2. The drawings are not to scale. 3. Solder pad can't be connected to slug. ●IR Reflow soldering profile for lead free soldering(J-STD-020C) s t DRAWING NO. : DS-50-10-XXX DATE : 2012-05-05 Page : 9 Release by PARA LIGHT DCC Enhance Power LED EP503IR4L076W REV:A/4 ●Storage 1. Do not open the moisture proof bag before the devices are ready to use. 2. Before the package is opened, LED should be stored at temperatures less than 30℃ and humidity less than 50%. 3. LED may be stored for 6 months. When the storage time has reached more than 6 months, LED should be stored in a sealed container filled with Nitrogen gas. 4. After the package is opened, LED should be stored at temperatures less than 30℃ and humidity less than 30%. 5. LED should be used within 168 hours (7 days) after the package is opened. 6. Before using LED, baking treatment should be implemented based on the following condition: pre-curing at 60±5℃ for 24 hours. ●E-Power Operating Procedure 1. E-power700 series products should be operated at 1000 mA for ideal performance, but not more than 1000mA. 2. E-power 1000 series products must be used in conjunction with heat-sinking devices. Soldering on Al PCB with mid-connection point while keeping the layout pattern (¢ 19.9mm,thickness2.5mm) is another way to help heat dissipation. Thermal Resistance for aluminum board must be less than 0.65 ℃/W. 3. A non-conductive heat-dissipating paste should be applied between E-power and heat-sinking device. 4. Sufficient thermal management must be applied. Large LED forward current will cause high junction temperature and reduce LED life. DRAWING NO. : DS-50-10-XXX DATE : 2012-05-05 Page : 10 Release by PARA LIGHT DCC Enhance Power LED EP503IR4L076W REV:A/4 ●Reliability Test Test Item Reflow Test Condition Tsol=260℃,10sec Stress Duration 3 times Temperature Cycle H:+100±5℃ 15mins L:-40±5℃ 15mins 300 Cycles High Temperature High Humidity Operation Ta=85℃±5℃ RH= 90~95% IF=1000mA 500 hours High Temperature High Humidity Storage Ta:65℃±5℃ RH:90~95%RH 1000hours Room Temperature Operation Ta= 25±5℃ IF =1000mA 1000hours Low Temperature Operation Ta= -40±5℃ IF=1000mA 1000hours Ta= 110±5℃ IF=1000mA 1000hours Ta=35℃ 48 hours High Temperature Operation Salt Spray Temperature for using with aluminum board, in a good thermal-exchange surroundings. Failure Criteria: 1. LED are open or shorted, 2. Radiant intensity attenuate difference(1000hours)>30%, 3. Forward voltage difference(1000hours) >20%. DRAWING NO. : DS-50-10-XXX DATE : 2012-05-05 Page : 11 Release by PARA LIGHT DCC Enhance Power LED EP503IR4L076W REV:A/4 ● Part NO. System of E-Power LED EP 5 03 IR4 L 076 W Special mark:W:white, B:black Series Number View Angle: 2: 2*5=10° 3: 3*5=15° 6 : 6*5=30° C: C*5=60° R1: λd =625nm G1: λd=525nm IR: λP=850nm W1: white W2: Netural White IR1:940nm L: L*5=130° M: M*5=160° Y1: λd=590nm B1: λd= 460nm A1: λd=615nm WY: warm white IR/IR4:850nm IRA:730nm Power: 01—0.5-1W,02—1-2W,03—2-3W,...... 0A-100W Slug material: 1—Al,2—silicon,3—Fe,4—ceramic, 5—Cu EP:Enhance Power DRAWING NO. : DS-50-10-XXX DATE : 2012-05-05 Page : 13