Release by PARA LIGHT DCC PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 http://www.para.com.tw E-mail: [email protected] DATA SHEET PART NO. : EP501RL003W REV : A/0 CUSTOMER’S APPROVAL : _______________ DRAWING NO. : DS-70-12-XXX DCC : ____________ DATE : 2012-08-07 Page : 1 Release by PARA LIGHT DCC Enhance Power LED EP501RL003W REV:A/0 ●Package Dimension ° Note: 1. All dimensions are in millimeters. 2. Tolerance is ± 0.25mm (.010") unless otherwise noted. ●Features 1. Long operating life. 2. Low voltage DC operated. 3. Instant light (Less than 100NS). 4. RoHS Compliant. 5. The led can withstand the max static level when assembling or operation（HBM） DRAWING NO. : DS-70-12-XXX DATE : 2012-08-07 Page : 2 Release by PARA LIGHT DCC Enhance Power LED EP501RL003W REV:A/0 ●Chip Material 1. Dice Material :AlGaInP 2. Light Color : Red 3. Lens Color : Water Clear ●Absolute Maximum Rating(Ta=25℃) Symbol Parameter Rating Unit IF DC Forward Current 350 mA 800 mA Peak Pulse Current Ipulse (tp≦100us, duty cycle=0.25) VR Reverse Voltage 5 V IR Reverse Current(VR=5V) 50 uA Tj LED Junction Temperature(at IF=350mA) 115 ℃ *Topr Operating Temperature -30 ~ +100 ℃ *Tstg Storage Temperature -40 ~ +100 ℃ Tsol Manual Soldering Time at 260℃(Max.) 5 seconds ESD ESD Sensitivity（Human Body Model） 2000 V Note : * : Temperature for using with aluminum board. ●Electro-Optical Characteristic(Ta=25℃,Topr=100ms) Min. Typ. Unit Test Condition 40 lm IF=350mA 130 deg Parameter Symbol Luminous Flux ΦV Viewing Angle 2θ1/2 Dominant Wavelength λd Spectral Line Half-Width Δλ 20 Forward Voltage VF 2.2 Reverse Current IR 619 DRAWING NO. : DS-70-12-XXX Max. 628 nm IF=350mA nm 2.8 V IF =350mA 50 μA VR = 5V DATE : 2012-08-07 Page : 3 Release by PARA LIGHT DCC Enhance Power LED EP501RL003W REV:A/0 ●Typical Optical and Electrical 100 Intensity (%) 80 60 40 20 0 400 500 600 700 800 900 1000 Wavelength (nm) 4.0 3.5 VF (V) 3.0 2.5 2.0 1.5 1.0 100 150 200 250 300 350 400 IF(mA) IF (mA) Forward Current VS Forward Voltage DRAWING NO. : DS-70-12-XXX DATE : 2012-08-07 Page : 4 Release by PARA LIGHT DCC Enhance Power LED EP501RL003W REV:A/0 ●Typical Optical and Electrical Wavelength (nm) 645 640 635 630 625 620 615 100 150 200 250 300 350 400 IF (mA) Forward Current VS Wavelength 120 100 ΦV (lm) 80 60 40 20 10 100 150 200 250 300 350 400 IF (mA) Forward Current VS Luminous Flux DRAWING NO. : DS-70-12-XXX DATE : 2012-08-07 Page : 5 Release by PARA LIGHT DCC Enhance Power LED EP501RL003W REV:A/0 ●Typical Optical and Electrical typical polar radiation pattern for lambertian ●Bin Code List Luminous Flux (ΦV),(Unit: lm ,IF=350mA) Bin Code Min Max G 27 33 H 33 39 I 39 45 J 45 52 K 52 60 Including test tolerance ± 10% Forward Voltage(VF),(Unit: V, IF=350mA) Bin Code Min Max V2 1.8 2.0 V3 2.0 2.2 V4 2.2 2.4 V5 2.4 2.6 V6 2.6 2.8 Including test tolerance±0.1V DRAWING NO. : DS-70-12-XXX DATE : 2012-08-07 Page : 6 Release by PARA LIGHT DCC Enhance Power LED EP501RL003W REV:A/0 Dominant Wavelength (Hue),(Unit: nm, IF=350mA) Bin Code Min Max R1 615 620 R2 620 625 R3 625 630 Including±2nm test tolerance ●Label Explanation PART NO: EP501RL003W LOT NO: L E M 10 1 A B C D E 001 F A---L: Local F: Foreign B---E: E-power C---M: For series number D---Year E---Month F---Spec. BIN NO: Bin Code ●Caution (1).Handling note: Do not touch LED’s lens. DRAWING NO. : DS-70-12-XXX DATE : 2012-08-07 Page : 7 Release by PARA LIGHT DCC Enhance Power LED EP501RL003W REV:A/0 (2)Please wear anti-static wrist strap and gloves to prevent ESD damage when handling. ●Packing Specification - 7.90±0.20 + 15.50±0.20 Cardboard A 50pcs*60tube=3000pcs) 105 105 Cardboard B (3000pcs*6carton=18000pcs) 490 330 250 N ote: 1. A ll dim ensions are in m illim eters. 2. N orm al packing Q uantity:3000pcs. 3. The carton B contains 6 cartons A at m axim um . DRAWING NO. : DS-70-12-XXX DATE : 2012-08-07 Page : 8 Release by PARA LIGHT DCC Enhance Power LED EP501RL003W REV: A/0 ●Suggest Soldering Pad Dimension 2 *1.50 6.40 5.82 11.65 16.65 Solder Mask Solder Pad Heat slug indepedent to electrical contact. Apply heat-dissipating paste here 2 *1.15 Note: 1. All dimensions are in millimeters. 2. The drawings are not to scale. 3. Solder pad can't be connected to slug. ●IR Reflow soldering profile for lead free soldering(J-STD-020C) ℃ s t DRAWING NO. : DS-70-12-XXX DATE : 2012-08-07 Page : 9 Release Release by PARA LIGHT DCC by PARA LIGHT DCC Enhance Power LED EP501RL003W REV:A/0 ●Storage 1. Do not open the moisture proof bag before the devices are ready to use. 2. Before the package is opened, LED should be stored at temperatures less than 30℃ and humidity less than 50%. 3. LED may be stored for 6 months. When the storage time has reached more than 6 months, LED should be stored in a sealed container filled with Nitrogen gas. 4. After the package is opened, LED should be stored at temperatures less than 30℃ and humidity less than 30%. 5. LED should be used within 168 hours (7 days) after the package is opened. 6. Before using LED, baking treatment should be implemented based on the following condition: pre-curing at 60±5℃ for 24 hours. ●E-Power Operating Procedure 1. E-power 350 series products should be operated at 350 mA for ideal performance, but not more than 350mA. 2. E-power 350 series products must be used in conjunction with heat-sinking devices. Soldering on Al PCB with mid-connection point while keeping the layout pattern (￠ 19.9mm,thickness2.5mm) is another way to help heat dissipation. Thermal Resistance for aluminum board must be less than 0.65 ℃/W. 3. E-power 350 series products are sensitive to static. Operators must wear static wristband (wireless static wristband is prohibited) and be well grounded while working in the environment with an ionizing air blower. Anti-static requirement should be under ESD 2000V. 4. A non-conductive heat-dissipating paste should be applied between E-power and heat-sinking device. 5. Sufficient thermal management must be applied.Large LED forward current will cause high junction temperature and reduce LED life. DRAWING NO. : DS-70-12-XXX DATE : 2012-08-07 Page : 10 Release Release by PARA LIGHT DCC by PARA LIGHT DCC Enhance Power LED EP501RL003W REV:A/0 ●Reliability Test Test Item number Test Condition Stress duration result Reflow 100pcs 3 times No Failure Temperature Cycle 20pcs 300 Cycles No Failure High Temperature High Humidity Operation 20pcs Tsol=260℃,10sec H:+100±5℃ 15mins L：-40±5℃ 15mins Ta=85℃±5℃ RH= 90～95% IF=350mA 500 hours No Failure High Temperature High Humidity Storage 20pcs Ta:65℃±5℃ RH:90～95%RH 1000hours No Failure Room Temperature Operation 20pcs Ta= 25±5℃ IF =350mA 1000hours No Failure Low Temperature Operation 20pcs Ta= -40±5℃ IF=350mA 1000hours No Failure High Temperature Operation 20pcs Ta= 110±5℃ IF=350mA 1000hours No Failure Salt Spray 20pcs Ta=35℃ 48 hours No Failure Temperature for using with aluminum board, in a good thermal-exchange surrounding. Failure Criteria: 1. LED are open or shorted, 2. Luminous flux attenuate difference(1000hours)＞30%, 3. Forward voltage difference(1000hours) ＞20%. Note: 1. These testings are going on. 2. The thermal resistance testing is going on DRAWING NO. : DS-70-12-XXX DATE : 2012-08-07 Page : 11 Release by PARA LIGHT DCC Enhance Power LED EP501RL003W REV:A/0 ● Part NO. System of E-Power LED EP 5 01 R L 003 W Special mark：W:white, B:black Series Number View Angle: 2: 2*5=10° 3: 3*5=15° 6 : 6*5=30° C: C*5=60° R1: λd =625nm G1: λd=525nm IR: λP=850nm W1: white W2: Netural White IR1:940nm L: L*5=130° M: M*5=160° Y1: λd=590nm B1: λd= 460nm A1: λd=615nm WY: warm white IR/IR4:850nm IRA:730nm Power： 01—0.5-1W，02—1-2W，03—2-3W,...... 0A-100W Slug material: 1—Al,2—silicon,3—Fe,4—ceramic, 5—Cu EP：Enhance Power DRAWING NO. : DS-70-12-XXX DATE : 2012-08-07 Page : 12