EP503IR4L017W B1

Release
by
PARA LIGHT DCC
PARA LIGHT ELECTRONICS CO., LTD.
4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan
Tel: 886-2-2225-3733
Fax: 886-2-2225-4800
http://www.para.com.tw
E-mail: [email protected]
DATA SHEET
PART NO. : EP503IR4L017W
REV : B/1
CUSTOMER’S APPROVAL : _______________
DRAWING NO. : DS-50-10-XXX
DCC : ____________
DATE : 2012-03-21
Page : 1
Release
by
PARA LIGHT DCC
Enhance Power LED
EP503IR4L017W
REV:B/1
●Package Dimension
°
Note:
1. All dimensions are in millimeters.
2. Tolerance is ± 0.25mm (.010") unless otherwise noted.
●Feature
1. Long operating life.
2. Low voltage DC operated.
3. Instant light (Less than 100NS).
4. RoHS Compliant.
5. Cool beam safe to touch.
6. Compatible to assemble, lead free reflow soldering process.
7. Night surveillance CCD camera illumination.
DRAWING NO. : DS-50-10-XXX
DATE : 2012-03-21
Page : 2
Release
by
PARA LIGHT DCC
Enhance Power LED
EP503IR4L017W
REV:B/1
●Chip Material
1. Dice Material : GaAlAs
2. Light Color : Infrared
3. Lens Color : Water Clear
●Absolute Maximum Rating(Ta=25℃)
Symbol
Parameter
Rating
Unit
IF
DC Forward Current
1000
mA
1250
mA
Peak Pulse Current;
Ipulse
(tp≦100us, duty cycle=0.25)
VR
Reverse Voltage
5
V
Ir
Reverse Current(VR=5V)
50
uA
Tj
LED Junction Temperature(at IF=1000mA)
115
℃
*Topr
Operating Temperature
-30 ~ +100
℃
*Tstg
Storage Temperature
-40 ~ +100
℃
Tsol
Manual Soldering Time at 260℃(Max.)
5
seconds
Note :
* : Temperature for using with aluminum board.
●Electro-Optical Characteristic(Ta=25℃)
Parameter
Symbol
Min.
Typ.
Radiant Intensity
IE
115
Viewing Angle
Unit
Test Condition
145
mw/sr
IF=1000mA
2θ1/2
130
deg
Peak Emission
Wavelength
λp
850
nm
Spectral Line
Half-Width
Δλ
50
nm
Forward Voltage
VF
2.2
V
Radiant Power
Power
Reverse Current
IR
400
DRAWING NO. : DS-50-10-XXX
Max.
500
IF=1000mA
IF =1000mA
mW
50
μA
DATE : 2012-03-21
VR = 5V
Page : 3
Release
by
PARA LIGHT DCC
Enhance Power LED
EP503IR4L017W
REV:B/1
●Typical Optical and Electrical
100
Intensity (%)
80
60
40
20
0
600
500
400
700
800
900
1000
Wavelength(nm)
Relative Intensity VS Wavelength
3
2 .7
VF(V)
2 .4
2 .1
1 .8
1 .5
1 .2
150
300
450
600
750
900
1050
IF (m A )
Operating Current VS Forward Voltage
DRAWING NO. : DS-50-10-XXX
DATE : 2012-03-21
Page : 4
Release
by
PARA LIGHT DCC
Enhance Power LED
EP503IR4L017W
REV:B/1
●Typical Optical and Electrical
860
Wavelength(nm)
855
850
845
840
835
830
200
400
600
800
1000
1200
1400
1200
1400
IF(mA)
Forward Current VS Wavelength
210
180
IE(mw/sr)
150
120
90
60
30
200
400
600
800
1000
IF(mA)
Forward Current VS IE
DRAWING NO. : DS-50-10-XXX
DATE : 2012-03-21
Page : 5
Release
by
Release
by
PARA LIGHT DCC
PARA LIGHT DCC
Enhance Power LED
EP503IR4L017W
REV:B/1
●Typical Optical and Electrical
typical polar radiation pattern for lambertian
●Bin Code List
Radiant Intensity(IE)(Unit: mw/sr ,IF=1000mA)
Bin Code
Min
Max
Z5
115
125
Z6
125
140
Z7
140
160
Z8
160
180
Including test tolerance ± 10%
Forward Voltage(VF)(Unit: V ,IF=1000mA)
Bin Code
Min
Max
V4
1.80
1.95
V5
1.95
2.05
V6
2.05
2.15
V7
2.15
2.25
V8
2.25
2.35
V9
2.35
2.45
Including test tolerance±0.1V
Dominant Wavelength (Hue)(Unit: nm , IF=1000mA)
Bin Code
IR4
Min
Max
840
870
Including±2nm test tolerance
DRAWING NO. : DS-50-10-XXX
DATE : 2012-03-21
Page : 6
Release
by
PARA LIGHT DCC
Enhance Power LED
EP503IR4L017W
REV:B/1
●Label Explanation
PART NO: EP503IR4L017W
LOT NO:
L E M 10 1
A
B
C
D
E
001
F
A---L: Local
F: Foreign
B---E: E-power
C---M: For series number
D---Year
E---Month
F---Spec.
BIN NO: Bin Code
●Caution
Handling note: Do not touch LED’s lens.
DRAWING NO. : DS-50-10-XXX
DATE : 2012-03-21
Page : 7
Release
Release
by
PARA LIGHT DCC
by
PARA LIGHT DCC
Enhance Power LED
EP503IR4L017W
REV:B/1
●Packing Specification
-
7.90±0.20
+
15.50±0.20
Cardboard A
(50pcs*60tube=3000pcs)
105
105
Cardboard B
(3000pcs*6carton=18000pcs)
490
330
250
Note:
1. All dimensions are in millimeters.
2. Normal packing Quantity:3000pcs.
3. The carton B contains 6 cartons A at maximum.
DRAWING NO. : DS-50-10-XXX
DATE : 2012-03-21
Page : 8
Release
by
PARA LIGHT DCC
Enhance Power LED
EP503IR4L017W
REV: B/1
●Suggest Soldering Pad Dimension
2 *1.50
6.40
5.82
11.65
16.65
Solder Mask
Solder Pad
Heat slug indepedent to electrical contact.
Apply heat-dissipating paste here
2 *1.15
Note:
1. All dimensions are in millimeters.
2. The drawings are not to scale.
3. Solder pad can't be connected to slug.
●IR Reflow soldering profile for lead free soldering(J-STD-020C)
s
t
DRAWING NO. : DS-50-10-XXX
DATE : 2012-03-21
Page : 9
Release
by
PARA LIGHT DCC
Enhance Power LED
EP503IR4L017W
REV:B/1
●Storage
1. Do not open the moisture proof bag before the devices are ready to use.
2. Before the package is opened, LED should be stored at temperatures less than 30℃ and
humidity less than 50%.
3. LED may be stored for 6 months. When the storage time has reached more than 6 months,
LED should be stored in a sealed container filled with Nitrogen gas.
4. After the package is opened, LED should be stored at temperatures less than 30℃ and
humidity less than 30%.
5. LED should be used within 168 hours (7 days) after the package is opened.
6. Before using LED, baking treatment should be implemented based on the following condition:
pre-curing at 60±5℃ for 24 hours.
●E-Power Operating Procedure
1. E-power700 series products should be operated at 1000 mA for ideal performance, but not
more than 1000mA.
2. E-power 1000 series products must be used in conjunction with heat-sinking devices.
Soldering on Al PCB with mid-connection point while keeping the layout
pattern (¢ 19.9mm,thickness2.5mm) is another way to help heat dissipation. Thermal
Resistance for aluminum board must be less than 0.65 ℃/W.
3. A non-conductive heat-dissipating paste should be applied between E-power and heat-sinking
device.
4. Sufficient thermal management must be applied. Large LED forward current will cause high
junction temperature and reduce LED life.
DRAWING NO. : DS-50-10-XXX
DATE : 2012-03-21
Page : 10
Release
by
PARA LIGHT DCC
Enhance Power LED
EP503IR4L017W
REV:B/1
●Reliability Test
Test Item
Reflow
Test Condition
Tsol=260℃,10sec
Stress Duration
3 times
Temperature
Cycle
H:+100±5℃
15mins
L:-40±5℃
15mins
300 Cycles
High Temperature
High Humidity
Operation
Ta=85℃±5℃
RH= 90~95%
IF=1000mA
500 hours
High Temperature
High Humidity
Storage
Ta:65℃±5℃
RH:90~95%RH
1000hours
Room Temperature Operation
Ta= 25±5℃
IF =1000mA
1000hours
Low Temperature
Operation
Ta= -40±5℃
IF=1000mA
1000hours
Ta= 110±5℃
IF=1000mA
1000hours
Ta=35℃
48 hours
High
Temperature
Operation
Salt Spray
Temperature for using with aluminum board, in a good thermal-exchange surroundings.
Failure Criteria:
1. LED are open or shorted,
2. Radiant intensity attenuate difference(1000hours)>30%,
3. Forward voltage difference(1000hours) >20%.
DRAWING NO. : DS-50-10-XXX
DATE : 2012-03-21
Page : 11
Release
by
PARA LIGHT DCC
Enhance Power LED
EP503IR4L017W
REV:B/1
● Part NO. System of E-Power LED
EP 5 02
IR L 009 W
Special mark:W:white, B:black
Series Number
View Angle:
2: 2*5=10°
3: 3*5=15°
6 : 6*5=30°
C: C*5=60°
R1: λd =625nm
G1: λd=525nm
IR: λP=850nm
W1: white
W2: Netural White
IR1:940nm
L: L*5=130°
M: M*5=160°
Y1: λd=590nm
B1: λd= 460nm
A1: λd=615nm
WY: warm white
IR/IR4:850nm
IRA:730nm
Power:
01—0.5-1W,02—1-2W,03—2-3W,......
0A-100W
Slug material:
1—Al,2—silicon,3—Fe,4—ceramic,
5—Cu
EP:Enhance Power
DRAWING NO. : DS-50-10-XXX
DATE : 2012-03-21
Page : 13