SAW Filter

SF0162BA03266S
SAW Filter
162 MHz SAW Bandpass Filter, 0.06 MHz Bandwidth
• 13.3 x 6.5 mm Ceramic LCC, 10 Pads
• RoHS Compliant
These filters are manufactured on quartz, which provides optimal temperature performance and are available from 80
-1600 MHz. This TCRF is designed for narrowband IF filtering such as in satellite transponders, directional finders and
anti-jam modems. Other packaging styles are available for more rugged environments and applications. Standard part
numbers as well as custom solutions are available. Please contact sales for more information.
TYPICAL PERFORMANCE
Center = 162 MHz, 0.2 MHz/div (2.5 kHz incr)
8/2012
SPECIFICATION
Parameter
Min
Typ
Max
Units
Minimum Insertion Loss
Device Delay
1 dB Bandwidth
Lower 1 dB Frequency
Upper 1 dB Frequency
3 dB Bandwidth
Center Frequency (Fc, 3 dB) 1
45 dB Bandwidth 2
Lower 45 dB Frequency 2
Upper 45 dB Frequency 2
Rejection (159.5-161.2 MHz) 2
Rejection (162.4-164.5 MHz) 2
Source and Load Impedance
Ambient Temperature
0.06
162.03
161.2
45
43
3.4
7.4
0.10
161.95
162.05
0.12
162
0.39
161.8
162.2
48
46
50
25
6
161.97
162.4
-
dB
µsec
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
dB
dB
ohms
°C
Notes:
1. Reference frequency. Computed as mean of the 3 dB frequencies.
2. All dB values are referenced to the insertion loss value.
MAXIMUM RATINGS
Parameter
Min
Max
Units
Storage Temperature Range
Operating Temperature Range
Input Power Level
-40
10
-
85
60
20
°C
°C
dBm
MATCHING CIRCUIT
Notes:
•
Recommend ± 2% toleranced matching components. Typical inductor Q=40.
•
Values shown are for reference only. Actual values are dependent upon board layout.
8/2012
PACKAGE OUTLINE
SUGGESTED FOOTPRINT
Units: mm
Tolerances are ± 0.15 mm except
where indicated.
Pad Configuration:
Input:
10
Output:
5
Ground:
All other pads
Package Material:
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 1 µm
min, over a 1.3 - 8.9 µm Ni plating
MARKING
+1 888.553.7531
apitech.com/microwave
+1 855.294.3800
www.apitech.com
8/2012