SPECTRUM SF0434BA03230S

SF0434BA03230S
SAW Filter
433.92 MHz SAW Bandpass Filter, 0.18 MHz Bandwidth
• 5 x 5 mm Ceramic LCC Package, 8 Pads
• RoHS Compliant
These filters are manufactured on quartz, which provides optimal temperature performance and are available from 80
-1600 MHz. This TCRF is designed for narrowband IF filtering such as in satellite transponders, directional finders and
anti-jam modems. Other packaging styles are available for more rugged environments and applications. Standard part
numbers as well as custom solutions are available. Please contact sales for more information.
TYPICAL PERFORMANCE
Center = 433.92 MHz, 1 MHz/div (12.5 kHz incr)
8/2012
SPECIFICATION
Parameter
Min
Typ
Max
Units
Center Frequency, (Fc) 1
Minimum Insertion Loss
Absolute Delay
1 dB Bandwidth 2
Lower 3 dB Frequency 2
Upper 3 dB Frequency 2
3 dB Bandwidth 2
50 dB Bandwidth 2
Relative Attenuation (10 - 433.38 MHz) 2
Relative Attenuation (434.46 - 700 MHz) 2
Turnover Temperature
Temperature Coefficient of Frequency (Tc) 3
Source and Load Impedance
Ambient Temperature (Tref)
433.89
0.12
434.01
0.18
50
50
-
433.92
3.9
3.15
0.2
433.79
434.05
0.26
0.93
55
55
0
-0.032
50
25
433.95
6
433.83
1
-
MHz
dB
us
MHz
MHz
MHz
MHz
MHz
dB
dB
°C
ppm/°C2
ohms
°C
Notes:
-
-
1. Reference frequency at 25°C. Computed as mean of the 3 dB frequencies.
2. All dB values are referenced to the insertion loss value.
3. Typical shift of frequency response with temperature is: Δf=(T-Tref)*Tc*Fc
MAXIMUM RATINGS
Parameter
Min
Max
Units
Storage Temperature
Input Power Level
-40
-
85
10
°C
dBm
MATCHING CIRCUIT
Notes:
•
Recommend 2% or better tolerance matching components. Typical inductor Q=40.
•
Optimum values may change depending on board layout. Values shown are intended as a guide only.
8/2012
PACKAGE OUTLINE
SUGGESTED FOOTPRINT
Units: mm
Tolerance are typically ± 0.15 mm
except where indicated.
Pad Configuration:
Input:
1
Output:
5
Ground:
All other pads
Package Material:
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 1 µm
min, over a 1.3 - 8.9 µm Ni plating
MARKING
+1 888.553.7531
apitech.com/microwave
+1 855.294.3800
www.apitech.com
8/2012