SF1060BA03211S SAW Filter 1060 MHz SAW Filter, 700 kHz Bandwidth • 3 x 3 mm LCC, 6 Pads • RoHS Compliant These filters are manufactured on quartz, which provides optimal temperature performance and are available from 80 -1600 MHz. This TCRF is designed for narrowband IF filtering such as in satellite transponders, directional finders and anti-jam modems. Other packaging styles are available for more rugged environments and applications. Standard part numbers as well as custom solutions are available. Please contact sales for more information. TYPICAL PERFORMANCE Center = 1060 MHz, 5 MHz/div (31.3 kHz incr) 8/2012 Center = 1060 MHz, 0.2 MHz/div (31.3 kHz incr) SPECIFICATION At +25 °C Ambient Parameter Min Typ Max Units Center Frequency, Fc Insertion Loss at Response Peak 1 dB Bandwidth 1 3 dB Bandwidth 1 20 dB Bandwidth 1 Absolute Delay at Fc Ultimate Rejection, 500 MHz to 1040 MHz 1 Ultimate Rejection, 1080 MHz to 1500 MHz 1 1059.7 700 20 20 1060 5 750 1000 2.8 20 22 21 1060.3 6.5 - MHz dB kHz kHz MHz ns dB dB -105 - +65 kHz At Other Temperatures Shift of Response Over Operating Temperature Range 2 Notes: 1. Levels in dB are taken relative to the response peak. 2. The center frequency varies quadratically with temperature, becoming a maximum at -14 °C MAXIMUM RATINGS Parameter Min Max Units Storage Temperature Range Operating Temperature Range Input Power Level -40 -40 - +85 +50 +10 °C °C dBm MATCHING CIRCUIT Notes: • Recommend 2% or better tolerance matching components. Typical inductor Q=40. • Optimum values may change depending on board layout. Values shown are intended as a guide only. 8/2012 PACKAGE OUTLINE SUGGESTED FOOTPRINT Units: mm Tolerances are ± 0.15 mm except where indicated. Pad Configuration: Input: 2 Output: 5 Ground: 1, 3, 4, 6 Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3 - 8.9 µm Ni plating +1 888.553.7531 apitech.com/microwave +1 855.294.3800 www.apitech.com 8/2012