SPECTRUM SF1600BA03269S

SF1600BA03269S
SAW Filter
1600 MHz SAW Bandpass Filter, 0.5 MHz Bandwidth
• 3 x 3 mm Ceramic LCC, 6 Pads
• RoHS Compliant
These filters are manufactured on quartz, which provides optimal temperature performance and are available from 80
-1600 MHz. This TCRF is designed for narrowband IF filtering such as in satellite transponders, directional finders and
anti-jam modems. Other packaging styles are available for more rugged environments and applications. Standard part
numbers as well as custom solutions are available. Please contact sales for more information.
TYPICAL PERFORMANCE
Center = 1600 MHz, 2.5 MHz/div (15.6 kHz incr)
8/2012
SPECIFICATION
Parameter
Min
Typ
Max
Units
Nominal Center Frequency
Minimum Insertion Loss
Nominal Delay
1 dB Bandwidth
Lower 1 dB Frequency
Upper 1 dB Frequency
3 dB Bandwidth
20 dB Bandwidth
Rejection (1000-1597 MHz)
Rejection (1603-2000 MHz)
Phase Deviation (1600 ± 0.25 MHz)
Group Delay Ripple (166 ± 0.25 MHz)
Source and Load Impedance
0.8
1600.25
1.0
20
20
-
1600
7.5
0.4
1.0
1599.48
1600.52
1.35
3.6
30
28
8
75
50
10
1599.75
20
200
MHz
dB
µs
MHz
MHz
MHz
MHz
MHz
dB
dB
deg
ns
ohm
Notes:
1. This specification applies across the whole operating temperature range (below).
Allowance has been made for the movement of the response from sample to sample and
with temperature change.
2. All quoted dB levels other than the insertion loss are relative to the peak of the response.
MAXIMUM RATINGS
Parameter
Min
Max
Units
Storage Temperature Range
Operating Temperature Range
Input Power Level
-40
0
-
85
70
10
°C
°C
dBm
MATCHING CIRCUIT
Notes:
•
Recommend ± 2% toleranced components. Typical inductor Q=40.
•
Values shown are for reference only. Actual values are dependent upon board layout.
8/2012
PACKAGE OUTLINE
SUGGESTED FOOTPRINT
Units: mm
Tolerances are as shown.
Pad Configuration:
Input:
2
Output:
5
Ground:
1, 3, 4, 6
Package Material:
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 1 µm
min, over a 1.3 - 8.9 µm Ni plating
+1 888.553.7531
apitech.com/microwave
+1 855.294.3800
www.apitech.com
8/2012