Double Balanced Mixer Model MM9xSMx Model MM9xSMx-14 RF 6.0 to 18.0 GHz Multi-Octave Band Electrical Specifications: (1) Specifications Conditions Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: Input 1 dB Compression Point: RF (GHz) 6.0-18.0 6.0-18.0 6.0-18.0 6.0-18.0 LO (GHz) 6.0-18.0 6.0-18.0 IF (MHz) DC-1300 DC-2500 6.0-13.0 13.0-18.0 6.0-18.0 6.0-18.0 Min 28 dB 24 dB DC-2500 Input Third Order Intercept Point: 6.0-18.0 6.0-18.0 DC-2500 LO Power: (4) 6.0-18.0 6.0-18.0 DC-2500 Typical 5.7 dB 6.9 dB Max 8.0 dB 9.0 dB 32 dB 28 dB 30 dB 30 dB +1 dBm +4 dBm +8 dBm +11 dBm +14 dBm +18 dBm +7 dBm +10 dBm +14 dBm MM93 MM94 MM96 MM93 MM94 MM96 MM93 MM94 MM96 Model MM9xSMx Model MM9xSMx-14 LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm Drop-In Module or With SMA(F) Connectors D = No Cover H = With Cover Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. 5. See Application Note M112, for aid in selecting the outline and for mounting and installation information. MM9xSMD MM9xSMH Outline: SMMD3A: AS SHOWN SMMD3B: RF & LO REVERSED MM9xSMx: AS SHOWN MM9xSMx-14: RF & LO REVERSED Typical Performance at 25˚C MHz Outline: SMMH3A: AS SHOWN SMMH3B: RF & LO REVERSED All dimensions are in inches and [mm]. MHz Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001 Rev. 9/10/07