Double Balanced Mixer Model MM9xxG-6 Multi-Octave Band RF 6.0 to 18.0 GHz Electrical Specifications : (1) Specifications Conditions RF (GHz) 6.0-18.0 6.0-18.0 Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: 6.0-18.0 LO (GHz) 6.0-18.0 6.0-18.0 IF (MHz) DC-1000 DC-2500 6.0-18.0 6.0-18.0 Min Typical 6.5 dB 7.0 dB 25 dB 25 dB 18 dB 30 dB 30 dB 20 dB Max 7.5 dB 8.0 dB Input 1 dB Compression Point: 6.0-18.0 6.0-18.0 DC-2500 +1 dBm +3 dBm +7 dBm +12 dBm MM93 MM94 MM96 MM97 Input Third Order Intercept Point: 6.0-18.0 6.0-18.0 DC-2500 +11 +13 +16 +23 LO Power: (4) 6.0-18.0 6.0-18.0 DC-2500 +7 dBm +10 dBm +13 dBm +19 dBm MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 dBm dBm dBm dBm Model MM9xxG-6 LO Power 3 = +7 dBm 4 = +10 dBm 6 = +13 dBm 7 = +19 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚C to +100˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM9xxG-6 Outline: G Typical Performance at 25˚C Conversion Loss (dB) LO to RF Isolation (dB) LO to IF Isolation (dB) All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001 REV A 8/20/09