Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74LVC17A
CMOS IC
HEX SCHMITT-TRIGGER
BUFFER
„
DESCRIPTION
SOP-14
The UTC U74LVC17A is a high-performance, low-power,
low-voltage, Si-gate CMOS device and provides six non-inverting
buffers with Schmitt trigger action. It is capable for transforming slowly
changing input signals into sharply defined, jitter-free output signals.
„
FEATURES
TSSOP-14
* Operate From 1.65V to 5.5V
* 5 V Tolerant Input/Output For Interfacing With 5 V Logic
*±32 mA Output Drive (VCC =4.5V)
* CMOS Low-Power Consumption And High Noise Immunity
* IOFF Supports Partial-Power-Down Mode Operation
* Latch-Up Performance Exceeds 100 mA
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
U74LVC17AL-S14-R
U74LVC17AG-S14-R
U74LVC17AL-S14-T
U74LVC17AG-S14-T
U74LVC17AL-P14-R
U74LVC17AG-P14-R
U74LVC17AL-P14-T
U74LVC17AG-P14-T
www.unisonic.com.tw
Copyright © 2012 Unisonic Technologies Co., Ltd
Package
Packing
SOP-14
SOP-14
TSSOP-14
TSSOP-14
Tape Reel
Tube
Tape Reel
Tube
1 of 6
QW-R502-410.B
U74LVC17A
„
„
CMOS IC
PIN CONFIGURATION
FUNCTION TABLE (Each Gate)
INPUT(A)
OUTPUT(Y)
L
L
H
H
Note: H=High level, L=Low Level
„
LOGIC SYMBOL (Each Gate)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 6
QW-R502-410.B
U74LVC17A
„
CMOS IC
ABSOLUTE MAXIMUM RATING
PARAMETER
Supply Voltage
Input Voltage (Note 2)
Output Voltage (Note 2,3)
High-Impedance
Power-Off State
High State
SYMBOL
VCC
RATINGS
-0.5~6.5
UNIT
V
VIN
-0.5~6.5
V
-0.5~6.5
V
-0.5~VCC+0.5
V
VOUT
Low State
Input Clamp Current
IIK
-50
mA
Output Clamp Current
IOK
-50
mA
Output Current
IOUT
±50
mA
VCC or GND Current
ICC
±100
mA
Junction Temperature
TJ
150
°C
Storage Temperature
TSTG
-65 ~ +150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. The input negative-voltage and output voltage ratings may be exceeded if the input and output current
ratings are observed.
3. The value of VCC is provided in the recommended operating conditions table.
„
RECOMMENDED OPERATING CONDITIONS
PARAMETER
Supply Voltage
SYMBOL
VCC
High-Level Input Voltage
VT+
Low-Level Input Voltage
VT-
Hysteresis Voltage
ΔVT
Input Voltage
TEST CONDITIONS
Operating
VCC = 1.65 V
VCC = 2.3 V
VCC = 3.0 V
VCC = 4.5 V
VCC = 5.5 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 3.0 V
VCC = 4.5 V
VCC = 5.5 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 3.0 V
VCC = 4.5 V
VCC = 5.5 V
VIN
VOUT
High or Low State
MIN
1.65
0.70
1.00
1.30
1.90
2.20
0.30
0.40
0.60
1.10
1.40
0.30
0.40
0.40
0.60
0.70
0
TYP
MAX
5.5
1.40
1.70
2.20
3.10
3.70
0.70
1.00
1.30
2.00
2.50
0.80
0.90
1.10
1.30
1.40
5.5
0
VCC
-40
TOPR
85
Ambient Operating Temperature
Note: All unused inputs of the device must be held at VCC or GND to ensure proper device operation.
Output Voltage
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
UNIT
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
°C
3 of 6
QW-R502-410.B
U74LVC17A
„
CMOS IC
ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified)
PARAMETER
SYMBOL
High-Level Output Voltage
VOH
Low-Level Output Voltage
VOL
Input Leakage Current
Power OFF Leakage Current
II(LEAK)
IOFF
Quiescent Supply Current
IQ
Additional Quiescent Supply
Current
ΔIQ
Input Capacitance
CIN
„
MIN
VCC-0.1
1.20
1.90
2.40
2.30
3.80
TYP
MAX UNIT
V
4
0.10
0.45
0.30
0.40
0.55
0.55
±5
±10
μA
μA
10
μA
500
μA
V
pF
SWITCHING CHARACTERISTICS (See Test Circuit And Waveforms)
PARAMETER
SYMBOL
Propagation Delay nA to nY
tPLH / tPHL
„
TEST CONDITIONS
IOH =-100μA
VCC = 1.65~5.5 V
IOH =-4mA
VCC =1.65 V
IOH =-8mA
VCC =2.3 V
IOH =-16mA
VCC = 3.0 V
IOH =-24 mA
VCC = 3.0 V
IOH =-32mA
VCC = 4.5 V
IOL =100μA
VCC = 1.65~5.5 V
IOL =4mA
VCC = 1.65 V
IOL =8mA
VCC = 2.3 V
IOL =12mA
VCC = 3.0 V
IOL =24mA
VCC = 3.0 V
IOL =32mA
VCC = 4.5 V
VIN =0 to 5.5V, VCC = 0~5.5 V
VIN or Vo=5.5V, VCC = 0
VIN = VCC or GND, IO =0,
VCC =1.65~5.5 V
One input at VCC -0.6v,
Other inputs at VCC or GND,
IO =0, VCC =3~5.5 V
VO = VCC or GND, VCC = 3.3 V
TEST CONDITIONS
VCC=1.8V±0.15V,RL=1KΩ
CL=30pF
VCC=2.5V±0.2V,RL=500Ω
VCC=3.3V±0.3V,RL=500Ω
CL=50pF
VCC=5.0V±0.5V,RL=500Ω
MIN
3.9
1.9
2.2
1.5
TYP
MAX UNIT
9.3
ns
5.7
ns
5.4
ns
4.3
ns
TYP
17
UNIT
pF
VCC=2.5V
18
pF
VCC=3.3V
19
pF
VCC=5V
21
pF
OPERATING CHARACTERISTICS (TA=25°С)
PARAMETER
SYMBOL
Power Dissipation Capacitance
CPD
TEST CONDITIONS
VCC=1.8V
f=10MHz
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 6
QW-R502-410.B
U74LVC17A
„
CMOS IC
TEST CIRCUITS AND WAVEFORMS
VCC
VIN
tR, tF
VM
CL
RL
1.65V~1.95V
VCC
≤2ns
VCC/2
30pF
1kΩ
2.3V~2.7V
VCC
≤2ns
VCC/2
30pF
500Ω
3.0V~3.6V
3V
≤2.5ns
1.5V
50pF
500Ω
4.5V~5.5V
VCC
≤2.5ns
VCC/2
50pF
500Ω
Definitions for test circuit: RL = Load resistance, CL = Load capacitance including jig and probe capacitance.
Note: 1. VOL and VOH are typical output drop that occur with the output load.
2. tPLH and tPHL are the same as tPD.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 6
QW-R502-410.B
U74LVC17A
CMOS IC
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R502-410.B