Ordering number : ENA1574B RD0506T Planar Ultrafast Rectifier http://onsemi.com Fast trr type, 5A, 600V, 50ns, TP/TP-FA Features • • • High breakdown voltage (VRRM=600V) Low noise at the time of reverse recovery Halogen free compliance Fast reverse recovery time Low forward voltage (VF max=1.6V) • • Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage VRRM Average Output Current Surge Forward Current IO IFSM Junction Temperature Tj Storage Temperature Tstg Conditions Ratings Sine wave 10ms, 1 cycle Unit 600 V 5 A 80 A 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions unit : mm (typ) Package Dimensions unit : mm (typ) 7518-002 7003-001 1 2 2.3 7.5 1 2 3 0 to 0.2 0.6 0.5 1 : No Contact 2 : Cathode 3 : Anode 4 : Cathode 3 2.5 0.8 0.8 1.6 0.6 1.2 1.2 5.5 0.5 0.85 0.85 0.7 RD0506T-TL-H 0.5 1.5 1.5 4 7.0 5.5 4 2.3 6.5 5.0 RD0506T-H 0.5 7.0 2.3 6.5 5.0 1 : No Contact 2 : Cathode 3 : Anode 4 : Cathode 1.2 2.3 2.3 TP-FA TP 2.3 Product & Package Information • Package : TP • JEITA, JEDEC : SC-64, TO-251 • Minimum Packing Quantity : 500 pcs./bag Marking (TP, TP-FA) • Package : TP-FA • JEITA, JEDEC : SC-63, TO-252 • Minimum Packing Quantity : 700 pcs./reel Packing Type (TP-FA) : TL Electrical Connection 4 R0506 LOT No. TL 1 Semiconductor Components Industries, LLC, 2013 September, 2013 2 3 91212 TKIM/N0409SC TKIM TC-00002160 No. A1574-1/7 RD0506T Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR VF IR Forward Voltage Reverse Current Ratings Conditions min IR=1mA IF=5A typ 600 V 1.3 VR=600V IF=5A, di / dt=100A/μs Reverse Recovery Time trr1 trr2 Thermal Resistance Rth(j-c) Unit max 40 IF=0.5A, IR=1A Junction -Case 1.6 V 50 μA 50 ns 16 ns 6 °C / W Ordering Information Device Package Shipping TP 500pcs./bag TP-FA 700pcs./reel RD0506T-H RD0506T-TL-H IF -- VF 25°C 0°C 0 50°C 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 f=100kHz 100 7 5 3 2 10 2 3 5 7 1.0 100°C 10 75°C 1.0 50°C 0.1 25°C 2 3 5 7 10 Reverse Voltage, VR -- V 0.001 1.8 2 7 0.1 125°C 100 0 100 200 2 3 5 7 100 IT14315 300 400 500 Reverse Voltage, VR -- V IT15094 Cj -- VR 3 Ta=150°C 0.01 600 IT15095 IFSM -- t 120 Surge Forward Current, IFSM(Peak) -- A 0.01 7 5 3 2 Reverse Current, IR -- μA °C 0°C -25 5°C 10 0 12 0.1 7 5 3 2 Forward Voltage, VF -- V Junction Capacitance, Cj -- pF IR -- VR 10000 75 °C °C 1.0 7 5 3 2 0.001 Pb Free and halogen Free 1000 Ta= 15 Forward Current, IF -- A 10 7 5 3 2 memo 100 80 60 40 20 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 IT15096 No. A1574-2/7 RD0506T Taping Specification RD0506T-TL-H No. A1574-3/7 RD0506T Outline Drawing RD0506T-TL-H Land Pattern Example Mass (g) Unit 0.282 mm * For reference Unit: mm 7.0 7.0 2.5 2.0 1.5 2.3 2.3 No. A1574-4/7 RD0506T Bag Packing Specification RD0506T-H No. A1574-5/7 RD0506T Outline Drawing RD0506T-H Mass (g) Unit 0.315 mm * For reference No. A1574-6/7 RD0506T ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A1574-7/7