ACTIVE DELAY LINES, 5-TAP & 10-TAP THROUGH-HOLE & SURFACE MOUNT A08 SERIES: 8-Pin DIP A14 SERIES: 14-Pin DIP SA08 SERIES: 8-Pin SIP SMA14 SERIES: 14-Pin SO RESISTORSCAPACITORSCOILSDELAY LINES RCD A0805AG 1 50NS Term.W is RoHS compliant & 260°C compatible RoHS RCD A1410AG 100NS 1 Economical cost A1405 popular values from stock! Wide selection, 20 - 1000nS Choice of 5 or 10 equally spaced taps TTL Schottky interfaced, TTL &DTL compatible RCD’s active delay lines have been designed to provide precise tap delays with all the necessary drive and pick-off circuitry. All inputs/outputs are schottky-type, requiring no additional components to achieve specified delays. Units are 100% inspected. Excellent for applications requiring high delay stability, fast rise times and no jitter, such as memory boards, disk drives, and signal processing. Application Guide available. OPTIONS .500 [12.7] Max Opt.T= trailing edge design Opt. F =fast TTL, H =HCMOS, C =FACT Opt.A = auto-insertable design Opt.ER = -55 to +125°C operating temp. Opt.39 = -40 to +85°C operating temp. Tighter tolerances, faster rise times Military screening SIDE SIDE VIEW .500 [12.7] Max .40 [10.2]Max ↑ .250 TOP VIEW ↓ ←.100 [2.54] .300±.01 [7.6±.25] TOTAL-DELAY TIMES (TD) ← .800 [20.3] Max → .40 [10.2] max 14 ↓ 1 20nS, 25nS, 30nS, 40nS, 45nS, 50nS, 60nS, 75nS, 100nS, 125nS, 150nS, 200nS, 250nS, 300nS, 350nS, 400nS, 450nS, 500nS, 750nS, 1000nS → Type A1405 (5-tap,14-pin DIP) (popular values listed in bold. Intermediate and extended range values available on special order). ←.800 [20.3] Max. → → 20nS 20nS 20nS 20nS 50nS 50nS 20nS 20nS - 500nS - 500nS -1000nS -1000nS -1000nS -1000nS - 500nS - 250nS Delay per Tap 20% TD 20% TD 20% TD 20% TD 10% TD 10% TD 20% TD 20% TD .300 [7.6] .420 [10.67] max 14 IN 1 7 R GND .10 [2.54] A1405 Schematic ← .800 [20.3] Max → 14 .295 [7.5] 8 TOP VIEW ↓ 1 → 13 3 12 4 11 5 10 6 9 8 .285 [7.24] .300 [7.62] 7 → ← ← .300 [7.6] .10 [2.54] .420 [10.67] max .020 [.5] Type A1410 (10-tap,14-pin DIP) V CC 14 IN 1 R 7 GND Type A1410AG (10-tap,14-pin SM) A1410 Schematic ← .505 [12.8] Max → 12 1 10 4 .280 [7.11] 8 → ← → .020 [.5] .050 [1.27] 12 4 10 6 8 OUT .250 [6.35] 6 7 ← .300 [7.6] .375 [9.53] max Type SMA1405 (5-tap, 14-pin SO) ← .810 [20.6] Max. → .018→ [.457] ← → .340 [8.64] Max. .150 [3.81] ← .100 [2.54] V CC 14 IN 1 7 R GND SMA1405 Schematic → .180 ← [4.5] max 3 4 5 6 7 OUT V CC → ← .010 [.25] Most popular models are listed in boldface. A1405AG is most popular SM model, A1405 is most popular thru-hole. Type SA0805 (5-tap, 8-pin SIP) TEST CONDITIONS @25°C P/N DESIGNATION: 1.) Input test pulse voltage: 3.2V 2.) Input pulse width: 50nS or 1.2x the total delay (whichever is greater) 3.) Input rise time: 2.0nS (0.75V to 2.4V) 4.) Delay measured at 1.5V on leading edge only with no loads on output (specify opt. T for trailing edge design) 5.) Supply Voltage (Vcc): 5V 6.) Pulse spacing: 2x pulse width min. ← 12 4 10 6 8 OUT V CC Type A1405AG (5-tap,14-pin SM) .40 [10.2] max TOP VIEW No. of Taps 5 5 5 5 10 10 5 5 → .020 [.5] .12 [3] min → ←.10 [2.54] .300±.01 .600 ± .010 ← [15.2 ± .25] → [7.6±.25] 14 CHARACTERISTICS A 0805 A0805AG A1405 A1405AG A 1410 A 1410A G S A 0805 SMA1405 → ← max. Operating Temp: 0 to 70°C (opt.39= -40 to +85°C, opt.ER= -55 to +125°C) Rise Time: 4nS max. Delay Tol: ±2nS or ±5%, whichever greater Tap Tol: ±2nS or 5%, whichever greater Peak Soldering Temp: +230°C RCD Type Delay Range .300±.01 [7.6±.25] ↑ SIDE VIEW SPECIFICATIONS .300 [7.62] 7 .12 [3] min ←.10 [2.54] A0805 Schematic .285 [7.24] 8 TOP VIEW max. R 4 GND TYPE A0805AG (5-tap,8-pin SM) .295 [7.5] .600 ± .010 ← [15.2 ± .25] 8 IN 1 .300 [7.6] .420 [10.67] max ← 7 2 6 3 5 OUT V CC .020 [.5] .10 [2.54] ↑ SIDE VIEW → → ← Type A0805 (5-tap, 8-pin DIP) ←.800 [20.3] Max. → .250 [6.35] 4 1 .120 [3] Min → .300 ±.01 [7.62±.25] .285 [7.24] 5 8 [6.35] 1 IN 2 8 R GND SA0805 Schematic A0805 - 100NS - B W Type: A0805, A0805AG, A1405, A1405AG, A1410, A1410AG, SMA1405, SA0805 Options: T, H, F, ER, C, A, 39 (leave blank if std.) Delay Time: 20NS, 25NS, 100NS, etc. Packaging: B=Bulk (magazine tube std),T=Tape &Reel (SM1405 only) Termination: W=Lead-free, Q=Tin/Lead (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA078A Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 109