SCHOT TKY BARRIER RECTIFIER MBR1035CT Thru MBR10200CT 10 Amps RoHS FEATURES • Low power loss, high efficiency • High current capability, low forward voltage drop • High surge capability • For use in low voltage, high frequency inverters, free wheeling and polarity protection applications • High temperature soldering: 260℃/10 seconds, 0.25”(6.35mm) from case MECHANICAL DATA • Molded plastic body (UL 94V-0 rated) • Terminals: lead free. solderable per MIL-STD-750, Method 2026 • Polarity: As marked • Mounting position: Any • Mounting torque: 5 in. - lbs. max • Weight: 0.08 ounce, 2.24 grams TO-220AB Dimensions in inches and (millimeters) MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS TA= 25ºC unless otherwise specified. MBR1035 MBR1045 MBR1050 MBR1060 MBR1090 MBR10100 MBR10150 MBR10200 CT CT CT CT CT CT CT CT Parameter Symbol Maximum Repetitive Peak Reverse Voltage VRRM 35 45 50 60 90 100 150 200 V Maximum RMS Voltage VRMS 24 31 35 42 63 70 105 140 V VDC 35 45 50 60 90 100 150 200 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @ Tc = 125˚C Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) at TC = 125°C Peak Forward Surge Current 60Hz Half-Sine Wave, 1 Cycle Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at: (Note 2) IF = 5A, TC = 25°C IF = 5A, TC = 25°C IF = 5A, TC = 25°C IF = 5A, TC = 25°C Peak DC Reverse Current @ Ta = 25°C at rated DC Blocking Voltage @ Ta = 125°C Voltage Rate of Change (Rated VR) Typical Thermal Resistance Junction to Lead (Note 3) Operating Temperature Range Storage Temperature Range Unit I(AV) 10.0 A IFRM 32 A IFSM 120 A 1.0 IRRM VF 0.70 0.57 0.80 0.67 0.5 0.85 0.75 0.95 0.85 0.80 0.65 0.90 0.75 0.88 0.78 0.98 0.88 A V 0.1 IR mA 15 10 2.0 dV / dt 10,000 V / µS R0JC 1.5 °C / W TJ -65 to +150 °C TSTG -65 to +175 °C NOTE: 1. 2.0µs Pulse Width, f = 1.0 Khz 2. Pulse Test: 300µs Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per leg, Mount on Heatsink Size of 2 in x 3 in x 0.25 in Page 1 of 2 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C3SBR7 2013.07.19 SCHOT TKY BARRIER RECTIFIER MBR1035CT Thru MBR10200CT 10 Amps RoHS RATING & CHARACTERISTIC CURVES FIG.2-MAXIMUM FORWARD CURRENT DERATING FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT (A) Tj=Tj max. 8.3ms Single Half Sine-Wave JEDEC Method 150 120 90 60 30 0 10 1 6 RESISTIVE OR INDUCTIVE LOAD 5 4 3 2 1 0 100 0 50 100 150 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 200 50 50 10 MBR1050CT-1060CT MBR1090CT-10100CT 5 1 MBR1035CT-1045CT INSTANTANEOUS REVERSE CURRENT (uA) Tj=25oC Pulse Width=300 s 1% Duty Cycle 100 MBR1035CT-1045CT MBR10150CT-10200CT 10 Tj=125 0C MBR1050CT-1060CT 1 Tj=75 0C 0.1 0.01 MBR1090CT-10200CT Tj=25 0C 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 0.001 0 1.4 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) INSTANTANEOUS FORWARD VOLTAGE (V) FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG FIG.5- TYPICAL JUNCTION CAPACITANCE 100 TRANSIENT THERMAL IMPEDANCE (ºC / W) 5,000 JUNCTION CAPACITANCE.(pF) INSTANTANEOUS FORWARD SURGE CURRENT (A) AVERAGE FORWARD CURRENT (A) 180 Tj=25 0C f=1.0MHz Vsig=50mVp-p 1,000 500 100 0.1 1.0 10 100 REVERSE VOLTAGE. (V) 10.0 1 0.1 0.01 0.1 1 10 100 T, PULSE DURATION. (sec) Page 2 of 2 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C3SBR7 2013.07.19